Belt dryer buy used

Recognised location: Ashburn (US) (Change)
Enter e-mail address
or
Move
1
Chip-belt dryer Make: Stella 93qlk293r Age: 2011 1. Installation of the outdoor installation possible 2. Wear-free lateral labyrinth covers for the lateral limitation of the Conveying flow. 3. Modular design with screwed connection, thus avoiding warping and welding Mounting 4. Plastic tape with special perforation for maximum performance and minimum dust load 5. Task system, special circular screw system (2-part counter-rotating) for one uniform coverage of the dryer belt over the entire widt... more
5
two independently controllable heating chambers a 3000W, both heating Chambers are freely movable. Blid3rdu The range is 30 cm. 16A, 380V / 50 Hz The new price of the dryer was over 6.700,00 euros gross. A delivery in Northern Germany would be theoretically possible. If you are interested just write it! The dryer can be taken apart for transport with a few screws in several parts. The belt dryer is 28844 Weyhe (located near Bremen). more
5
Manufacturer Hans Binder Maschinenbau GmbH Type EBT 300/7 Year of construction 2007 Operating hours approx. 31,000 The dryer was used in a biogas plant for fermentation residues dimensions: Total length 17,100 mm Ecmpi0bgq Total width 4,200 mm Housing height 2,900 mm Bandwidth effective 3,000 mm Dry area effective 41 m² We offer the belt dryer in customer order. Inspection can be arranged at any time with us. more
3
width 72 cm age 1977 Hsmsogf UV belt dryer stacking delivery Gremser Delivery time: immediately from stock more
6
used 3-piece dryer run dryer belt dryer of 3 x 52.5 kW heat capacity Manufacturer: Junker conveying systems GmbH Type: continuous dryer TRDUE : No.10 11968 BJ.: 2008 maximum drying temperature: 160 ° C Heat output: 3 x 52.5 kW Fn2fx3h Heating medium: 400 V maximum temperature of the heating surfaces: 300 ° C Air speed: 20 m/s Fan: 3 x 4175 m ³/h Engine power: 6 x 2,2 kW Air supply: 3 x 675 m ³/h Minimum air volume flow at 20 ° C: 3 x 675 m ³/h Motor power: 3 x 0.37 kW One outle... more
3
width 45 cm age 1985 UV belt dryer G02b7q8 Delivery time: immediately from stock more
3
S2iufnybeltgrinder Scantool TAS 75 beltdimensions 75 x 2000 mm more
2
Belt conveyor, rubber conveyor belt, rubber conveyor belt width 500 mm thickness 15 mm length 32.8 m Transport dimensions 1200/800/H800 mm Weight including packaging 380 kg 3vd3p8gl more
4
-Table length 2500 mm -Grinding table depth 900 mm -motorized table hub -Right / left rotation -CE.konform Available from week 51-2017 Hgpjb0f more
3
Funding part below = 1450 mm Funding part above = 1707 mm Get funding part = 505 mm Bl39sz3k = Overall width 510 mm Belt width = 400 mm = Drive / three-phase 400V / 50 Hz Speed = 4 m / min Angle = 60 ° more


belt dryer
every day

New machines via email!

Be informed!
1
width of the strips 200 mm band length 1490 mm table-size 540 x 280 mm engine output 1,5 kW total power requirement 230 V weight of the machine ca. 72 kg Yjjiwxya2 more
6
We offer: Conveyor belt conveyors MTF 600x37x up to 100 cm clocked running/Pause.oder installed on machine in height and angle adjustable, fahrlbar 3 stand with 4 castors, band is operational. Manufacturer: MTF technique Bergneustadt Type: probably BLF Martin No. Year of built: unknown Band dimensions: 600 x 37 cm Mass conditioning: 610 x 54 cm Height: 100 cm Angle: adjustable Mobile: Yes on 12 rolls Connection: 400V 50 Hz Control: DTSG2 Weight approx. 200 kg State. used se... more
5
FFörderband belt conveyor conveyor belt conveyor chain conveyor drive gearmotor 0.37 kw-belt width 150 mm length 400 mm Adjustable speed 14-56 m / min-2x conveyor available-price-piece weight at 88 kg 3gy77ggh more
6
-Sanding table size 2200 x 900 mm -Frame Sharpener 700 x 500 mm -Motor 3 kW -Right / left rotation -CE compliant Bml3ntf3 more
4
Funding part bottom L = 883mm Funding part above L = 883mm Funding part get L = 883 mm Bahuvwwryf Total width = 410mm = Belt width 300mm = Drive / three-phase 400 V / 50 Hz Angle = 60 ° more
2
Long belt sander M7f39 Fabr. Schmid more
1
width of the strips 200 mm band length 1490 mm Us2xoeyz table-size 540 x 280 mm engine output 1,1 kW total power requirement 380 V weight of the machine ca. 72 kg more
6
We offer: Conveyor belt conveyors MTF BLF 500x37x100cm clocked running/Pause.oder installed on machine in height and angle adjustable, fahrlbar 3 stand with 4 castors, band is operational. Bahxjoq8u8 Manufacturer: MTF technique Bergneustadt Type: BLF No. 9508-0379/02 Year of construction: 1995 Band dimensions: 500 x 37 cm Mass conditioning: 505 x 50 cm Height: 100 cm Angle: adjustable Mobile: Yes on 12 rolls Connection: 400V 50 Hz Control: DTSG2 Weight approx. 200 kg State... more
3
V-belt pulley pulley diameter 500 mm -9 belt fan belt width 17 mm Recording collet 90 mm Taperbuchse 4040 pulley-balanced Weight 85 kg other pulleys in stock Hhx3zngvu more
6
CATALOG NO. 4537 PRODUCT FEATURES Wide belt sander designed for precision grinding calibrating - finishing of surfaces of solid wood construction joinery elements laminated board, plywood and the like. It is a machine tool with high performance and precision grinding. Depending on the applied granulation abrasive strips thereon can roughly grind, smoothing or calibrating. ADVANTAGES - Italian production - 2 agregtay - Vacuum pump - 6 additional boots included - very good condition - Unpain... more
6
Type: WIN630 9goa8vigq used machine working width: 630 mm combi unit contact roller steel sanding pad motor power: 7,5kW Year of construction: 1997 location: Warehouse / 82281 Herrnzell more
4
Max working pressure - 16,0 BAR Max temperature - 70 C Voltage / Phases / Frequency - 230/1/50 Max absorption - 6,3 A Bah3bexoi2 Installed power - 1,10 kW Weight - 167 kg more
6
We offer: Conveyor belt conveyors MTF NL IE 010 215 + 40x30x100cm abgewinlkelt clocked or installed in height and angle adjustable, fahrlbar on 4 wheels, band broken otherwise functional. Manufacturer: MTF technique Bergneustadt Type: NL-IE 0110 No. 5264 Year of construction: 1998 Band dimensions: 255 x 30 cm Mass system: 256 x 50 cm Height: 100 cm Angle: adjustable Mobile: Yes on 4 wheels Connection: 400V 50 Hz Control: DTSG2 Weight approx. 200 kg State. used see photos, r... more
3
Pulley, pulley br / br / -diameter 480 mm br / -Gesamtbreite 240 mm br / br -9x belt / -Keilriemenbreite 22 mm br / recording 124 mm br / -Riemenscheibe balanced br / -weight 95 kg br / -Other pulleys in stock Xzepwleg0 more
1
width of the strips 100 mm Cum7fvt band length 920 mm engine output 0,35 kW saw band speed 7 m/sec. Table surface 300 x 150 mm roll diameter 58 mm dimensions 460 x 400 x 210 mm voltage 380 V weight of the machine ca. 15 kg more
5
Übersetzte Beschreibung: Manufacturer: Atlas Copco Model: FX 3 Year of construction: 2011 Flow rate: 0.85 m 3/min Refrigerant: R 134a Yo0ccyf8c "Compressed air connection: G 3/4" Dimensions: Lxwxh = 40 x 50 x 50 cm weight: 25 kg more
6
lacquer and veneer sanding machine + structuring brush Bagttxinrh cross sanding belt longbelt sanding - 1 electronic sanding pad structuring brushing unit cleaning brushing unit sanding width mm: 1300 Sanding hight mm: 3-120 Number of sanding belts: 2 Sanding belt dimensions: mm 2620 X 1320 Aggregat 1 sanding speed m/sec: 2,5-16 Aggregate 2 sanding speed m/sec: 2,5-16 Power motor cross belt kW: 11 Power motor belt 2 kW: 18 variabel feeding speed m/min: 5-18 Feeding motor kw: 2,5 ... more
6
We offer: Conveyor belt conveyors 1250 x 370 mm with Drehzahlsteueung + hot-air blower in height and angle adjustable, fahrlbar on 4 wheels, functional. Manufacturer: unknown Type:? No.? Year of construction:? Band dimensions: 370 x 1250 Mass installation: 650 x 1350 Height: 10 cm Angle: adjustable Mobile: Yes on 4 wheels Connection: 230V 50 Hz Engine: RF 0.12/4-7R Connection: 380/220V 0.12 kW Speed control through: Frequency converter: Moeller DF4-120-037 Input: 1/N/PE AC ... more
3
Pulley, pulley br / br / -diameter 450 mm br / -Gesamtbreite 130 mm br / br -6x belt / -Keilriemenbreite 17mm br / recording 90 mm br / -Riemenscheibe balanced br / -weight 48 kg br / -Other pulleys in stock Clpjjcv more
1
width of the strips 300 mm C2v2asze band length 2.070 mm table-size 750 x 380 mm 7,5 m/sec engine output 1,5 kW total power requirement 400 V weight of the machine ca. 85 kg more
3
Csf2eelyManufacturer: Hiross Model: PGN 110 Year: 2006 volume: 11.0 m ³/min Refrigerant: R 407 c. Dimensions: WxDxH = 92 x 70 x 110 cm weight: 145 kg with new refrigeration unit more
6
3 aggregates/ belts, sanding from top sanding belt length 2620 mm working width 1380 mm sanding belt mounting: left side working height 3 - 160 mm Pmin 6 bar suction connection 3 x 160 mm machine dimensions approx. L x W x H = 2615 x 2100 x 2415 mm weight approx 3560 kg 1. aggregate roller, DM 190 mm, steel motor 22 kW, 400 V, 50 Hz pneumatic on/ off for roller 2. aggregate roller, DM 190 mm, hardness 90 SH Bagr2m0ghk motor 15 kW, 400 V, 50 Hz pneumatic on/ off for roller 3. agg... more
6
We offer: Conveyor belt conveyors Salama 1000/400 L mobile 230V 120W in height and angle adjustable, fahrlbar on 4 wheels with shelf Manufacturer: Salama Laichingen Type: 1000/400 L No. 25201-00 Year of construction: 2000 Band dimensions: 100 x 40 cm Mass system: 135 x 52 cm Height: 100 cm Angle: adjustable Mobile: Yes on 4 wheels Connection: 230V 50 Hz 120 W Geared motor: 0.12 kW Weight 150 kg State. used see photos, ready to be used, as is, Next conveyor belts on sale. ... more
3
Pulley, pulley br / br / -diameter 322 mm br / -Gesamtbreite 185 mm br / 8X belt br / -Keilriemenbreite 17mm br / recording 90 mm br / -Riemenscheibe balanced br / -2x pulleys available br / prize piece br / -weight 38 kg br / -Other pulleys in stock Psm8ou more
6
Sanding pad pneumatic lifting plate in the grinding table Electr. Height adjustment Right / left rotation Ez77lngwu Grinding table approx. 2500 x 1500 mm pneumatic lifting plate in the grinding table Lighting Dimensions approx. L x W x H 3750 x 1500 x 1600 mm pneumatic type Disassembly: The machine has been properly dismantled and is prepared for the transport Transport dimensions: L x W x H approx. 3700 x 1200 x 1300 mm (The table expanded) Facilities images see te... more
1
Manufacturer: Kaeser Model: TA 8 Year of construction: 1998 Quantity: 0, 85 m³/min Refrigerant: R 134 a Weight: 85 kg Abmessungen:(HxBxT)-870 x 490 x 630 Cold dryer with thermal mass. Ucmh39pxk Good condition, functional, available at short. more
2

Air dryer Atlas

Egenhofen / Herrnzell Germany
6809 km
2007
USED
BadnxljbllType: FX3 Used Year of construction: 2007 Location: Warehouse / 82281 Herrnzelll more
6
We offer: Conveyor belt conveyor 160 x 30 x 93 cm mobile way 400V 60W in height and angle adjustable, fahrlbar on 4 wheels Manufacturer: unknown Type:? No.? Year of built: unknown Band dimensions: 160 x 30 cm Dimensions unit: 165 x 550 cm Height: 93 cm Angle: adjustable Mobile: Yes on 4 wheels Connection: 400V 50 Hz Gear motor way Balingen 400V 50 Hz 0.06 kW Gl8p9n3 Weight approx. 200 kg State. used see photos, ready to be used, as is, Next conveyor belts on sale. He... more
3
Pulley, pulley br / br / -diameter 460 mm br / -Gesamtbreite 265 mm br / -10x belt br / -Keilriemenbreite 22 mm br / recording 160 mm br / -3x pulleys available br / prize piece br / -weight 78 kg br / -Other pulleys in stock Ma9st more
5
Max air preassure : 16 bar Energy consumption : 2,5 kW Hjousip Efficiency : 18 m3/min Dimensions : 1365 mm x 815 mm x 1617 mm Weight : 503 kg more
6
longitudinal current dryer / timber drying kiln LAUBER KT-5 MP90 approximately 2m³ staple volume used, very good condition wood drying with fresh-air-exhaust-air technique longitudinal ventilation – drying parallel to fiber orientation inside complete with 1,5 mm special aluminum faced Ezbnm9hha bivalve thermal insulation outside aluminium painted servo cover for very easy and safe open – and close control system MP 90 with printer for reports and drying process hand-automatic oper... more
3
Working width: 1300 mm number of grinding units: st. Workpiece thickness max.: mm grinding belt dimensiones: mm feed motor: kW feed speed: mm/min Wfb2c machine dimensions LxWxH: m weight: kg For woodworking!!! pneumatic conveyor guide height adjustment via hand wheel EMERGENCY STOP switch mechanical thickness indicator grinding wheel adjustment Roller conveyors (infeed and outlet) on Sale as is! more
6
We offer: Conveyor belt conveyors MTF GL-IE010 200 x 26 x 110 cm clocked or installed in height and angle adjustable, fahrlbar on 4 wheels Manufacturer: MTF technique Bergneustadt Type: GL-IE 0110 No. 6111 Year of construction: 1999 Band dimensions: 200 x 26 cm Dimensions unit: 212 x 50 cm Height: 110 cm Angle: adjustable Mobile: Yes on 4 wheels Connection: 400V 50 Hz Badrfazxw2 Control: DTSG2 Weight approx. 200 kg State. used see photos, ready to be used, as is, Next c... more
3
Pulley, pulley br / br / -diameter 570 mm br / -Gesamtbreite 314 mm br / -12x belt br / -Keilriemenbreite 22 mm br / -Taperbuchse, Taperspannbuchse, taperlock jack br / recording 95 mm br / br -Riemenscheibe balanced / -2x pulleys available br / prize piece br / -weight 169 kg br / -Other pulleys in stock Ftcau8i8y more


belt dryer
every day

New machines via email!

Be informed!

to

to

Change search
BELT DRYER
SELL IMMEDIATELY
on Europe's market leader for as little as € 0,79 per ad.
Find out more now


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machine Finder chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close