Used Furnace for sale (719)

Condition: like new (used), Chanber size: 280x180x500mm upper 280x130x450mm lower Kjdpfx Abjd Sm Dij Todi Max temperature: 700 C °

Condition: new, Year of construction: 2025, An active lime production line is a set of equipment designed to produce high-quality lime from limestone, with the aim of meeting various industrial applications, such as in the production of steel, environmental desulfurization, and other processes. The process typically involves several stages, including limestone crushing, calcination, hydration, and finally, the production of active lime. Here is a general overview of the main steps involved in an active lime production line: 1. Limestone Quarrying: - Raw limestone is extracted from quarries and transported to the lime plant. The limestone may undergo crushing and sizing processes to achieve the desired particle size. 2. Limestone Preheating: - The raw limestone is typically preheated in a preheater or precalciner before entering the rotary kiln. This preheating step helps to reduce the energy consumption in the kiln by partially decarbonizing the limestone. 3. Loading into the Rotary Kiln: - The preheated limestone is loaded into the rotary kiln, a large, rotating cylindrical furnace. The kiln is inclined at a slight angle to facilitate the movement of materials through the kiln. 4. Calcination: - In the rotary kiln, the limestone undergoes high-temperature calcination (typically in the range of 900 to 1,450 degrees Celsius). This process causes the limestone to undergo chemical and physical changes, converting it into lime (calcium oxide). 5. Cooling: - After calcination, the lime moves through the cooling zone of the kiln, where it is cooled down. This cooling step is essential to stabilize the lime and prepare it for further processing. 6. Hydration: - The quicklime produced in the kiln is then slaked with water in a hydration process to produce slaked lime (calcium hydroxide). This is typically done in a separate hydrator. 7. Separation of Unreacted Lime: - The slaked lime is separated from any unreacted quicklime or impurities. This step ensures that the final product is of high quality. Ksdpfx Absq Nyzbs Todi 8. Filtering and Drying: - The separated slaked lime is filtered to remove excess water, and the resulting product is dried to achieve the desired moisture content. 9. Storage and Packaging: - The final product, active lime (calcium oxide), is stored in silos or other storage facilities. It can then be packaged for sale or transported to end-users. 10. Environmental Considerations: - Dust collection systems and other environmental control measures are often implemented to minimize emissions and ensure compliance with environmental regulations. The design and configuration of an active lime production line can vary based on factors such as the type of limestone used, production capacity requirements, and specific industrial applications. Modern production lines often incorporate advanced technologies to optimize energy efficiency, minimize environmental impact, and ensure high-quality active lime production.

Year of construction: 2024, condition: ready for operation (used), The heat exchangers are part of the system but were commissioned separately. The new price of the system was therefore over EUR 2 million. The official commissioning took place in April 2024; however, this only involved trial runs and not series production. Technical Data – Modular Chamber Furnace System for Homogenizing Aluminum Billets (Used Equipment) Machine type: Modular chamber furnace system with heat recovery Application: Homogenization (heat treatment) of aluminum billets in batches Design: Electrically heated chamber furnaces with jet heating and air circulation, heat exchanger furnaces, charging machine, racks System Construction The system essentially consists of: • 1 preheating furnace (BSN 1607) – electrically heated, jet heating • 2 holding furnaces (BSN 1608, 1609) – electrically heated, air circulation • 2 heat exchanger furnaces (BSN 1610, 1611) – unheated, with air circulation • 1 charging machine (BSN 1612) – electric/hydraulic • 12 charging racks (BSN 1614) • Control system with PLC (Siemens S7 1515F 2PN, Profinet) and operator panel • Contact thermocouples for direct billet temperature measurement Kjdpfjyt Ihbjx Ab Todi The system is designed as a complete machine in accordance with Machinery Directive 2006/42/EC (CE compliant). Further information can be found in the attached PDF.

Condition: used, Year of construction: 2018, PUJOL LAM PRO – Year 2018 Lamination Furnace Internal dimensions 2800 x 4000 mm Kdjdpfxoyvgvkj Ab Toi Power 40 kW

Condition: excellent (used), Despatch LCC2-14NV-3 Year of manufacture: approx. 2018 Kdsdpfsyvlauox Ab Toi Max. temperature: 260 °C / 500 °F Power: 415V - 1PH - 50 Hz Full Load Amps: 25.2 AMPS S.C.C.R: 5 kA Heater: 16 kW / 22.3 AMPS Largest Motor Amps: 2.1 AMPS Total Motor Amps: 3.2 AMPS

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: seco, Used Heat Treatment Furnace for Aluminium Alloys Make: SECO WARWICK Model: SDBF-24.16.30/600E Year of manufacture: 2014 EXPERIENCE SECO/WARWICK is a global leader in the development, design, and manufacture of furnaces and systems for the heat treatment of aluminium alloys. SECO/WARWICK has delivered numerous solution heat treatment, aging, and annealing furnaces for processing aluminium alloys from both wrought and cast materials. Kjdpfox Tbf Uex Ab Tjdi All technical solutions presented in this offer are proven and have already been successfully implemented by SECO/WARWICK in furnaces for a wide range of applications within the aluminium industry. A significant number of these furnaces have been supplied to the aerospace industry and meet their particularly stringent requirements as well as all relevant standards and regulations. CAPACITY The data provided by the customer forms the basis for the system design and also serves as the foundation for the guaranteed performance of the line. The system is designed for the heat treatment of aluminium pistons and cylinder heads.

Condition: ready for operation (used), A Rohde chamber kiln is available. Volume: 600l, max. temperature: 1000°C, internal dimensions X/Y/Z: 710mm/870mm/920mm, power: 40kW, insulation layers: 2, heating directions: 4, heating element: grooved refractory brick. Machine dimensions X/Y/Z: approx. 1100mm/1500mm/2300mm, weight: approx. 1000kg. Documentation available. An on-site inspection is possible. Kodpfx Asyvix Isb Tjdi

Year of construction: 2024, condition: like new (used), functionality: fully functional, System Overview Complete modular chamber furnace system for batch homogenising of aluminium extrusion billets, electrically heated with jet-heating, waste-heat recovery, and full automation. CE-certified (Machinery Directive 2006/42/EG). Scope of supply: 1× Preheating furnace (BSN 1607) — electric, jet-heating 2× Holding furnaces (BSN 1608, 1609) — electric, forced air circulation 2× Heat-exchanger furnaces (BSN 1610, 1611) — unheated, forced air circulation 1× Charging machine (BSN 1612) — electric/hydraulic 12× Charging racks (BSN 1614) Control cabinet with Siemens S7-1515F 2PN (Profinet) PLC and operator panel Pusher thermocouples for direct billet temperature measurement Key technical advantages: Jet-heating for fast, uniform billet heating (typically 3–4× faster than conventional convection furnaces) Integrated heat-exchanger furnaces for efficient waste-heat recovery — reduced energy consumption and operating costs Kdjdeyuvq Tspfx Ab Tei Overtemperature operation possible — shorter cycle times with direct billet temperature monitoring Suitable for homogenisation and/or solution heat treatment / ageing Modular design — suitable for new installations and retrofits of existing lines Ideal for: Aluminium extrusion plants and casthouses seeking to optimise energy consumption, CO₂ footprint, and throughput. Further technical details available upon request (PDF with full specifications).

Condition: good (used), Internal dimensions 250 x 400 x 160 mm Temperature 1150° MARCELS MASCHINEN AG Kedevhazfepfx Ab Todi

Year of construction: 2012, condition: excellent (used), functionality: fully functional, machine/vehicle number: 9349-0010, Used: rotary hearth furnace / mandrel hardening press Manufacturer: Aichelin Model: Drehherdofen Aichelin RDGs 270 Kdodpfsw Rrxfox Ab Tji Control: Siemens S7-300/317-2 PN/DP Year of manufacture: 2012 Max. temperature: 950 °C GAS

Year of construction: 2020, condition: like new (used), functionality: fully functional, conveyor belt length: 8,000 mm, temperature: 1,200 °C, Tunnel Type Enamel Cooking Ovens are based on the principle of hanging the workpiece to be fired on the oven conveyor and firing at maximum 1200C. These types of furnaces are internally rotating furnaces, after the workpiece is hung on the conveyor (maximum gross output 1 000 kg/h), it is provided to be fired (firing zone 10meters) or dried while traveling at a certain speed according to the thickness and m2 area of the part. Tunnel Type Enamel Cooking and Drying Ovens are specially designed with our expert engineering staff. Our Tunnel Type Enamel Cooking and Drying Ovens are also manufactured as assembled. Thanks to this feature, it can be easily assembled and moved to other areas if desired. In the industry, it is preferred by high-capacity production enterprises. Kdedovcdr Djpfx Ab Toi

Condition: used, Year of construction: 2007, Glass tempering furnace GMC FOR GLASS INDUSTRY THF 150300S - Year: 2007 1500x3000 mm 210x75 mm 2.8-19 mm Kedpsx Hxutefx Ab Tedi 16380x5000 mm 400 V Control cabinet – 2 pcs Computer with monitor, mouse, keyboard Additional computer Roller table 3500x1550 mm – 2 pcs

Condition: used, Year of construction: 2011, functionality: unexamined, total length: 1,700 mm, total height: 1,400 mm, total width: 680 mm, overall weight: 400 kg, Centrotherm VLO 20-N2-HCOOH Vacuum Furnace/Process System Kdsdpfxeyubphe Ab Tsi Thermal process system with nitrogen and formic acid supply, including Leybold vacuum pump and control system. Year of manufacture: 2011. Well-maintained exterior condition, but without documentation and no available password – therefore only partially tested. Power: 10 kW; Load current: 25 A; Supply: 3/N~ 400/230 V 50 Hz; Breaking capacity: 0.3 kA; Operating hours: approx. 21,286 h

Year of construction: 2025, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Kdsdpfx Abjfzccne Toi Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Year of construction: 2025, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Kdjdpfx Aefx Nfmob Tsi Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Condition: ready for operation (used), Door glass present Interior dimensions: Width: 340 mm Height: 355 mm Kedeyk Et Nspfx Ab Todi Depth: 360 mm Rated temperature: 500° C

Year of construction: 2013, condition: ready for operation (used), functionality: fully functional, - Compact tabletop model with user-friendly, parallel upward-opening door - Double-walled housing with blower cooling, low external surface temperature - Furnace insulation made of low thermal mass alumina material, allowing for rapid heating and cooling - High-quality heating elements made from molybdenum disilicide (MoSi2) - Low power requirements - Heating elements controlled via thyristors, ensuring extremely precise furnace control; wear-free and silent operation - High temperature accuracy inside the furnace chamber - Exhaust vent in the furnace ceiling Kedpfx Aeytr Eksb Tsdi Incl. PC: HP Compaq dx2300 Microtower Dx2300M/E2160/160hnd/1024L/4rf, Dual Core with Microsoft XP + DVD drive + 19" Philips monitor Model ID: 190B4CS/00 (Company: Bechtle, Heilbronn 26.09.2003 net €528 Inventory No. 5633) with Eurotherms iTools with Wizards pre-installed and on DVD, all necessary cables, keyboard, Logitech wireless mouse

Year of construction: 2000, condition: repair required (used), We are offering this SAFED conveyor belt furnace in need of repair, year of manufacture 2000. Numerous spare parts are included. Manufacturer: Safed Model: 1 used continuous furnace Year of manufacture: 2000 Operating temperature (hardening furnace): 870-930°C Gas power: 240 kW A Max. gross batch weight: 400 kg/h Max. batch width: 600 mm Quenching type: oil Tempering furnace: Gas power: 215 kW Operating temperature: 170-650°C Max. batch weight: 400 kg/h Washing machine: Max. batch weight: 400 kg/h The system is still operational until the end of March 2026. Several spare parts are also included. Original purchase value approx. €85,000. All prices are ex works Kehl; disassembly and all subsequent costs are the responsibility of the buyer. VAT is not included in the prices. Subject to prior sale and errors. Used equipment is sold without any warranty or guarantee. We cannot be held liable for personal injury or property damage during disassembly by the buyer. Place of jurisdiction is Germany. All agreements are made under German law. The material remains the property of the seller until full payment has been received. If you have any questions or require further information, please feel free to write us a message or give us a call. Kdedjyr Atpjpfx Ab Toi

Year of construction: 1985, condition: used, For sale Batch annealing furnace – completely customs refurbished in 2010. With 2 furnace lids made of stainless steel – new ( 2020 and 2025). Original manufacturer : LEE WILSON ENGINEERING Company. CLEVELAND OHIO 3m diameter x 3 m height size of charge Protection Gas: HNX (Nitrogen-Hydrogen) -Pression in cover :8 mbar. Fan rotation:750r/min. Cooling: Air jet cooler (Max 60°c/hour depending on the charge) Kdedpfx Absyqyf He Tsi The atmosphere can be changed, currently at 95/5% H N. If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: ready for operation (used), Year of construction: 2001, total width: 1,500 mm, total length: 3,000 mm, Glass tempering furnace 4-19 mm, loading 1.5 x 3 m, without convection, furnace is connected, machine is operational but requires improvements, on-site testing possible. Kodpfxox Dy Sfj Ab Tedi

Condition: excellent (used), Annealing furnace Make Naber Type 41 S 12 kw YEAR OF MANUFACTURE 1972 Kdodpfx Aborwfqnj Tji Dimensions of the annealing chamber : width 350 mm height 220 mm depth 500 mm Transport dimensions : Length 1350 mm Width 850 mm Height 1560 mm with pallet Weight 320 kg

Condition: excellent (used), Year of construction: 2021, temperature: 1,000 °C, energy consumption: 10 kWh, Laboratory furnace / Glass tempering furnace Max temperature: 1000°C Kdjdpfx Asxcb Hnsb Tji

Condition: new, 7 pieces heating coil new for a melting furnace Fulmina SOU 20E, Technical data: Reversible element with connection ends Ø 10 x 270 mm power: 10.000 Watt Voltage: 220 Volt cold resistance: 4,60 (± 5%) Ohm wire diameter: 4,50 mm coil inner Ø: 29 mm leg length: 240 mm Kdodjd Tx A Eepfx Ab Tsi Number of legs: 3 x 8 pieces Wire quality: CrFeAl Y 3 heating coils are a complete set in this model (the pictures of the melting furnace serve the representation and show the model in which the heating coils were installed, they fit however also into other models with smaller or higher achievement, it changes only the number of pieces) immediately available from stock

Condition: ready for operation (used), functionality: fully functional, total length: 5,000 mm, total width: 950 mm, total height: 1,620 mm, Lathe with 360 mm swing diameter at 2,900.00 EUR – Dimensions (LxWxH): 5000x950x1620mm. Lathe for 708 mm swing diameter at 5,500.00 EUR – Dimensions (LxWxH): 9500x1900mm, bar passage: 110 mm, maximum length: 3200 mm, carriage passage: 800 mm, swing radius: 1200 mm. Passaggio barra 110 mm, lunghezza massima 3200 mm, passaggio carello 800 mm, tornibile tastella 1200 mm. Ksdpfeyrdtdex Ab Tjdi Small hardening oven 900.00 EUR – Dimensions (LxWxH): 900x650x1350mm Comaca notching machine 1,900.00 EUR – Dimensions (LxWxH): 1150x900x1350mm FENDO 250 A bandsaw 2,900.00 EUR – Dimensions (LxWxH): 2300x1860x1150mm AEG AG63K hacksaw 1,500.00 EUR – Dimensions (LxWxH): 1650x700x2000mm Rems pipe threading machine, 2 units. 1 unit is defective, offered for spare parts, if needed. Dimensions (LxWxH): 950x700x1250mm. Both machines for 500.00 EUR. Exhibition stand frame elements. All commercial workshop machines and equipment stem from the closure of a machine shop. For sale is a robust and precise VDF A208 lathe, ideal for workshops, metalworking, or training centers. Technical Data (approx.): Lathe A208 Swing over bed: approx. 430 mm Centre height: approx. 210 mm Centre distance: depending on version (e.g. 1000 / 1500 / 2000 mm) Leadscrew and feed shaft for thread cutting Solid cast iron machine bed Precise and reliable German quality machine The machine is very solidly built, runs smoothly, and is ideal for accurate turning operations. VDF machines are renowned for their durability and high manufacturing quality. Condition: Used, fully functional. Viewing possible by appointment.

Condition: good (used), Year of construction: 2014, Overall dimensions: 12.4 x 18.8 m incl. safety fencing Number of baskets per oven: 2x 1,170 x 1,150 x 2,000 mm Reference load weight (net/gross): 1,285 / 2,185 kg Kdsdsyiaf Iepfx Ab Tei Max. load weight (net/gross): 2,000 / 2,700 kg Load: 2,050 x 1,150 x 2,800 mm, external dimensions: 2,950 x 6,400 x 7,800 mm Max. temperature: 600 °C Operating temperature: 510 °C Total heating capacity: 2 x 81 kW = 162 kW electric Quenching water bath: Type = QT-24.16.57/71E Temperature bath max.: 70°C, chamfering volume = 20 m^3 2 ageing furnaces: Type = ADBF-24.16.30/250E External dimensions: 2,800 x 4,850 x 4,000 mm Oven temperature max.: 250°C Operating temperature: 180 °C Total output: 2x 40.5 kW = 81 kW Electrical storage/retrieval section, Gea cooling coil, protective housing, safety equipment, system control 1,056 annealing baskets with stanchion pallets System already dismantled, packed and stored