Used Induction Melting Furnace for sale (1,715)

Year of construction: 2014, condition: excellent (used), functionality: fully functional, Foundry electric induction melting furnace for melting of: - Steel - iron - aluminum - copper - brass - Bronze TECHNICAL DETAILS Nominal power: 1 ton Gbsdpfx Aelxnlfsftsu Temperature: 1700 °C Transformer capacity: KVA 800 Year of manufacture transformer: 2014 High voltage: 10 +- 2 x 2,5% kV current: 41,86 / 38,97 - 23,89 A Low voltage: 840 - 105 V Current: 464 - 275 A EQUIPMENT / SCOPE OF DELIVERY Hydraulic tilting Water cooling system

Condition: used, Melting furnace with 2 working chambers, Internal dimensions per chamber: l=1640mm, Gsdpfjh Rmwdox Aftobu w=1060mm, assignable interior height: h=400mm, Dimension: l=6000mm, w=2260mm, h=1400mm

Year of construction: 2015, condition: new, rotary drum dimensions: length: 6000 mm inside: Ø 1600 mm outside: Ø 2280 mm max. temperature: 1200 ° C heating: gas eating power 2700 kW melting capacity: 6000 kg / h The plant consists mainly of: - furnace - hydraulic power pack and tilting mechanism - heating system - carousel with molds - charge box Godpfxjcmxzij Aftjbu - measuring and control system

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: Seriennr.: 4046, Equipment: documentation/manual, Ingot casting belt 600 Gbedpfxsu S N Ahs Aftju Zinc melting furnace ZSO 600 / 700 B

Condition: new, 7 pieces heating coil new for a melting furnace Fulmina SOU 20E, Gedpfsd Tx A Esx Aftjbu Technical data: Reversible element with connection ends Ø 10 x 270 mm power: 10.000 Watt Voltage: 220 Volt cold resistance: 4,60 (± 5%) Ohm wire diameter: 4,50 mm coil inner Ø: 29 mm leg length: 240 mm Number of legs: 3 x 8 pieces Wire quality: CrFeAl Y 3 heating coils are a complete set in this model (the pictures of the melting furnace serve the representation and show the model in which the heating coils were installed, they fit however also into other models with smaller or higher achievement, it changes only the number of pieces) immediately available from stock

Condition: reconditioned (used), Melting and casting furnace for aluminum and ZnAl. The furnace is after a general renovation, new lining, specialized painted, functional. The furnace capacity for aluminum is approximately 3,000 kg. Suitable for melting with a gas, oxygen or oil burner. Gbsdoh Nycaspfx Aftsu

Condition: good (used), Year of construction: 1940, functionality: fully functional, type of input current: three-phase, total height: 4,000 mm, total width: 3,000 mm, total length: 6,000 mm, year of last overhaul: 2021, input voltage: 10,000 V, temperature: 1,600 °C, power: 1,200 kW (1,631.54 HP), overall weight: 30,000 kg, Klein Lichtbogen Ofen 3-5 tonen Kapazitaet, 1,2 MW/ 10 kV. Godeg S U Dkjpfx Aftobu

Condition: ready for operation (used), A good used induction heat sealer model ICS 1H from Relco UK - ideal for low speed semi-automatic or manual line with diaphragm in cap for sealing onto container. Gbsdoua E Rqspfx Aftou

Condition: new, Year of construction: 2025, An active lime production line is a set of equipment designed to produce high-quality lime from limestone, with the aim of meeting various industrial applications, such as in the production of steel, environmental desulfurization, and other processes. The process typically involves several stages, including limestone crushing, calcination, hydration, and finally, the production of active lime. Here is a general overview of the main steps involved in an active lime production line: 1. Limestone Quarrying: - Raw limestone is extracted from quarries and transported to the lime plant. The limestone may undergo crushing and sizing processes to achieve the desired particle size. 2. Limestone Preheating: - The raw limestone is typically preheated in a preheater or precalciner before entering the rotary kiln. This preheating step helps to reduce the energy consumption in the kiln by partially decarbonizing the limestone. 3. Loading into the Rotary Kiln: - The preheated limestone is loaded into the rotary kiln, a large, rotating cylindrical furnace. The kiln is inclined at a slight angle to facilitate the movement of materials through the kiln. 4. Calcination: - In the rotary kiln, the limestone undergoes high-temperature calcination (typically in the range of 900 to 1,450 degrees Celsius). This process causes the limestone to undergo chemical and physical changes, converting it into lime (calcium oxide). Gsdpfx Afjq Nyzbstjbu 5. Cooling: - After calcination, the lime moves through the cooling zone of the kiln, where it is cooled down. This cooling step is essential to stabilize the lime and prepare it for further processing. 6. Hydration: - The quicklime produced in the kiln is then slaked with water in a hydration process to produce slaked lime (calcium hydroxide). This is typically done in a separate hydrator. 7. Separation of Unreacted Lime: - The slaked lime is separated from any unreacted quicklime or impurities. This step ensures that the final product is of high quality. 8. Filtering and Drying: - The separated slaked lime is filtered to remove excess water, and the resulting product is dried to achieve the desired moisture content. 9. Storage and Packaging: - The final product, active lime (calcium oxide), is stored in silos or other storage facilities. It can then be packaged for sale or transported to end-users. 10. Environmental Considerations: - Dust collection systems and other environmental control measures are often implemented to minimize emissions and ensure compliance with environmental regulations. The design and configuration of an active lime production line can vary based on factors such as the type of limestone used, production capacity requirements, and specific industrial applications. Modern production lines often incorporate advanced technologies to optimize energy efficiency, minimize environmental impact, and ensure high-quality active lime production.

Year of construction: 2016, condition: ready for operation (used), Suitable for stainless steel wire: 1.4301, 1.4310, 1.4401, wire diameter: 0.25-0.5mm with a strength up to 2400 N/mm², working speed: 75-80m/min, temperature range: 400-650°C, suitable for four wires at the same time with one temperature gauge (movable), shielding gas: forming gas grade 95/5 95%N2/5%H2, nitrogen gas, cooling: water-cooled tubes. Gedpfjn R Nhqex Aftjbu

Condition: excellent (used), GH Induction Type: 30 SMBC Transistor generator for inductive heating Medium frequency with series resonant circuit The SMBC generator series retains the traditional advantages of the Transithermic family of generators (high reliability, simple operation and high efficiency) in a series resonant circuit and a compact design, with cooling enclosed in the generator enclosure. Rittal generator cabinet and GH induction TC150 / 2 resonant circuit Voltage 400V Frequency 50 Hz Current 56 A Power 37.5 KVA as good as new condition! Scope of delivery: Transistor generator, Rittal generator cabinet with cooling and TC150 / 2 resonant circuit (Changes and errors in the technical data, specifications are reserved!) Gbjdsb E I Utopfx Aftju We will be happy to answer any further questions you may have on the phone.

Condition: good (used), electric motor, three-phase motor -Power: 1.1 kW -Speed: 920 rpm -Shaft diameter: 24 mm -Bolt circle flange: Ø 165 mm -Flange: Ø 200 mm -Design: B5 Gbodpedd Ax Tjfx Afteu -Protection class: IP 54 -Dimensions: 315/200/H205 mm -Weight: 15.5 kg

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: SINAC 25/40 SM Exp, total height: 1,500 mm, total width: 1,000 mm, total length: 2,500 mm, type of input current: three-phase, input voltage: 400 V, pressure: 6 bar, input current: 45 A, Induction heating station with 25 kW power for transporting and pressing bearings. Gbedew Hwp Nepfx Aftsu

Condition: like new (used), Chanber size: 280x180x500mm upper 280x130x450mm lower Max temperature: 700 C ° Gbodpfx Aod Sm Dijftsu

Condition: used, Year of construction: 2016, functionality: fully functional, A flexible induction bending machine (Liming Electrical & Machinery Factory) for bending and curving tubes (pipes), box sections, wide flange beams, and channels. This 30” capacity induction bending machine was installed in 2017 at our works in Oldbury in the UK. THE MACHINE CAPACITY: Tube / Pipes From Ø165 up to Ø762 6" up to 30" (USA) Beams (easy way & hard way) IPE 600 & HEB 600 W27 x 178 (USA) Box Sections 100 x 100 up to 500 x 500 4" x 4" up to 20" x 20" (USA) Godpfjupia Nex Aftobu Channels UPN 50 up to UPN 400 C6 x 8.2 up to C15 x 50 (USA)

Year of construction: 2019, condition: ready for operation (used), Connected load: 84kVA, length: 5065mm, width: 1100mm, height: 1530mm. Gbjdjg A Trgspfx Afteu

Year of construction: 2019, operating hours: 34,933 h, condition: ready for operation (used), machine/vehicle number: NO-19-05-07358/GE1101824, Technical data (German) Manufacturer: EFD Induction a.s. Type: SINAC 50/80 SM Serial number: NO-19-05-07358/GE1101824 Year of manufacture: 21/19 Electrical data: Input voltage: 400-480 V AC Input current: 90 A Mains frequency: 50/60 Hz Input power: 62 kVA Reactive power: 62 kVAr Gbsdpfx Asvw S Rwjftsu Output data: Output voltage: Not specified Output current: 350 A Output power: 50 kW Frequency range: 10-25 kHz Cooling & operating conditions: Water consumption: 21 l/min Maximum inlet temperature: 35°C Maximum pressure: 6 bar Min. pressure difference inlet/outlet: 4.5 bar Ambient temperature (operation): +5°C to +50°C Protection class (IP): IP54

Condition: used, Specifications: Gbjdpfx Aewtzt Eeftju - 10' x 5' dia. - 750kg capacity - 700 C temperature - Propane fired - 10 HP rotation motor - Furnace tilting and door opening on hydraulic cylinders - Control panel - CSA approved Price: Upon agreement! Usage: working with non-ferrous metals (such as magnesium, aluminium, zinc, lead, etc.) in various applications.

Condition: excellent (used), Nabertherm Annealing Furnace Kiln Type N 200/H Temperature up to 1340°C Year of manufacture: 1991 18 kW Gbedpfx Afoxl R I Heteu 27.3 amperes 380 volts Control: Program Controller C8 Internal dimensions: Width: 500 mm Depth: 500 mm Height: 700 mm Transport dimensions: Width: 800 mm Length: 1200 mm Height with stand: 1850 mm / without: 1200 mm Weight: 480 kg

Condition: used, max. temperature 1150 Grad voltage 380 Volt total power requirement 5.0 kW weight 50.0 kg from a vocational school (!!) Heraeus is one of the leading manufacturers of furnaces for heat treatment in Laboratories, craft and industry. Solidly constructed, high-quality components. Especially for material testing or heat treatment of welded or additively constructed construction parts, tempering, annealing etc. Furnishing: - HERAEUS hardening / chamber / annealing furnace Gbjdpexg R Ivjfx Aftju - for heat treatment of metal - Infinitely adjustable temperature - for workshop use - front - hinged door - front degree indicator - timer

Condition: used, This Heraeus vacuum furnace, type VT 5042 EK, is being auctioned online in our industrial auction / machinery auction due to the closure of the Siemens ST laboratory – laboratory equipment, laboratory machines, materials. Gjdpjxlgq Defx Aftjbu

Condition: good (used), Basket LxWxD 300 x 210 x 460 mm 150-500 Degrees Gbsdpfx Ashz D Iwofteu MARCELS MASCHINEN AG

Year of construction: 1995, condition: ready for operation (used), Product: Electrosinter Year of production: 1995 Air transport: 2x9000m3 Airspace / Capacity: 32m3 Oven opening: 1200 x 1200mm // 80 x 1500mm Heat load: 55-160kW G20 natural gas Air temperature: 170-220 ° C Enclosure size: 2600 x 10300 x 3600mm Gbedpfx Aog R Sh Aefteu Electrical cabinets included. It requires electronic and mechanical renovation. Purchase of industrial equipment and machinery. Wide Range of Used Machinery, Industrial Equipment

Condition: good (used), Internal dimensions 250 x 400 x 160 mm Temperature 1150° Gbedpfxjvhazfe Aftju MARCELS MASCHINEN AG

Condition: good (used), Internal dimensions diametre x depth 430 x 630 mm Temperature 800° Gbodpfsw Nnqujx Aftou MARCELS MASCHINEN AG