Used Turnings Melting for sale (7,651)

Condition: ready for operation (used), BM-20 RESIN TRANSFER & ADHESIVE GLUE MELTING SUPPLY SYSTEM Gbedsw Dhgmopfx Aftju

Condition: ready for operation (used), A hot melt adhesive unit Nordson with the corresponding EPC-15 controller and PS40 power supply is available. Tank volume: 4l, temperature range: 40°C-230°C, heating capacity: approx. 2500W, heating time: 20-30min, machine dimensions X/Y/Z: approx. 550mm/350mm/500mm, weight: approx. 50kg. Documentation available. An on-site inspection is possible. Gedpfx Afjxbhhpotobu

Year of construction: 2021, condition: new, 2021 INFINITY MT500-P MELTING TANK with auger/PUMP never used - new Gsdpfxjwu A Ugo Aftjbu

Condition: used, Year of construction: 2000, Glass melting equipment for making glass insulation for lamp heads. Gsdpfsxbyz Ujx Aftebu

Condition: like new (used), Easimelt melting tank Stainless melting tank, ideal for many products such as chocolate, fondants, jams, jellies, syrups or heat liquids prior to production, 75L capacity, mobile, 3Ph Godsix Ix Rspfx Aftobu

Condition: used, SLM Solutions Type: SLM 500 Build space (L x W x H): 500 x 280 x 365 mm (minus substrate plate height) Gbsdpfov Iff Nsx Aftsu 3D optics configuration: Quad (4x 700 W) Build rate: up to 345 cm³/h Variable layer thickness: 20 µm - 90 µm, Min. structure size 150 µm Focus diameter 80 µm - 115 µm Max. scan speed: 10 m/s Average protective gas consumption in the build process: 16 l/min (argon) Average protective gas consumption in the flooding process: 250 l/min (argon) Powder supply with 90 kg Electrical connection / power consumption: 400 volts 3NPE, 63 A, 50/60 Hz, 8-5.5 kW Compressed air requirement / consumption: ISO 8573-1:2010 [1:4:1] 7 bar Machine dimensions (L x W x H): 6080 mm x 2530 mm x 2620 mm Machine weight (without / including powder): kg, kg with powder Was operated with aluminum AlSi10Mg! Laser hours: 1689 h Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: used, Melting furnace with 2 working chambers, Internal dimensions per chamber: l=1640mm, w=1060mm, assignable interior height: h=400mm, Gbodpfx Afjh Rmwdstou Dimension: l=6000mm, w=2260mm, h=1400mm

Year of construction: 2017, condition: ready for operation (used), A drum melter SM Klebetechnik for melting and conveying hot melt adhesives from 200 liter drums is available. Power: 20kW, max. operating temperature: 180°C, temperature accuracy: +/-1°C, temperature sensor: PT-100, pump capacity: 320kg/h, drum volume: 200l, filling heads: 2, machine dimensions X/Y/Z: approx. 1900mm/850mm/2800mm, weight: approx. 650kg, control: Siemens Simatic S7-1200, operating hours: 87h, pump hours: 15h. Documentation available. On-site inspection is possible. Gbsdpfswynvmox Aftou

Condition: new, Type: New Boiling Melting Fat 300 Liter Completely stainless steel Integrated mixing system Double insulating wall Possibility of boiling the mass Volume: 300 liter Electrical power: 12kW Gbsdpfxof Saa Ae Aftju Machine dimensions in cm: Length: 161 Width: 124 Height: 123 Delivery time: 1 working day after advanced payment

Condition: ready for operation (used), Used stainless steel tank with double jacket Final use: food CONTAINER IS CLEANED! Item number: 10247 Volume: approx. 400L Type: Standing on feet Material (wetted parts): 1.4301 / AISI304 Design: Double malt Underbody: dished boiler end Topsoil: Flat bottom with hinged lid Operating pressure according to type plate: ATM Tank dimensions: Container diameter: 930mm cyl. height: 450mm Total height: Ca 1220mm height of the feet: 480mm materials: Interior: 1.4301 / AISI 304 Outside: 1.4301 / AISI 304 facilities: Double jacket around cylinder and underbody Various connections Godsd A Tt Aspfx Aftobu Hinged cover Agitator mounting Type plate

Condition: used, M5000, Krüss, melting point measuring device for automatic measurements Gbedpfx Aeutacisftsu Model: M5000 Condition: Used

Year of construction: 2015, condition: new, rotary drum dimensions: length: 6000 mm inside: Ø 1600 mm outside: Ø 2280 mm max. temperature: 1200 ° C heating: gas eating power 2700 kW melting capacity: 6000 kg / h Gbjdpfx Afecmxzijtsu The plant consists mainly of: - furnace - hydraulic power pack and tilting mechanism - heating system - carousel with molds - charge box - measuring and control system

Condition: new, Diameter 620mm Height 700mm Wall thickness 40mm Suitable for aluminum, among other materials Gjdpfswmmq Nox Aftsbu

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: Seriennr.: 4046, Equipment: documentation/manual, Ingot casting belt 600 Gbjdpfou S N Ahex Aftju Zinc melting furnace ZSO 600 / 700 B

Condition: new, Type: New Boiling Melting Fat 600 Liter Completely stainless steel Integrated mixing system Double insulating wall Possibility of boiling the mass Volume: 600 liter Electrical power: 24kW Machine dimensions in cm: Length: 187 Width: 158 Height: 123 Gbodpof S A Injfx Aftsu Delivery time: 1 working day after advanced payment

Condition: like new (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 1QJ071, Processable materials: Metals in powder form. These include, for example, stainless steels and tool steels, aluminum alloys, nickel-based alloys and titanium alloys. You can find more information about materials and surface quality on our homepage. Weight (net): 1,870 kg Laser type: Ytterbium fiber Laser power: 1 × 500 W Dimensions: 2,165 mm x 1,236 mm x 2,130 mm (L x W x H) Build space (1) 250 mm × 250 mm × 350 mm (L x W x H) Powder layer thickness: 20 μm to 120 μm Typical process speed (3): 2 m/s (max. 10 m/s) Build rate (2): Up to 254 cm³/h Beam focus diameter: 80 μm with dynamic focus Dynamic focus diameter: Up to 500 μm Beam wavelength: 1,070 nm to 1,080 nm Laser modulation frequency (max.): 20 kHz Build chamber atmosphere preparation time: 15 minutes (to < 1,000 ppm oxygen content) Filling/emptying system consumption: < 1,200 l Maximum argon consumption (during filling): 400 l/min Ongoing argon consumption (after initial filling): < 0.8 l/min Working pressure in chamber: 10 mbar to 20 mbar Argon gas supply connection: 3/8 in BSP male connector Argon quality: 20 ppm permissible impurity or better (99.998% purity) Power supply (4): 380 V to 480 V AC, 63 A, 50 Hz to 60 Hz, 3-phase Data connections (5): Standard RJ45 network connection. Renishaw recommends using Cat 6 power cables. Ideal operating temperature (7): 18°C to 22°C (min./max.: 15°C to 28°C) Ideal relative humidity (7): < 60% (max. < 80%) Clearance under machine (excluding base): 146mm Optical module protection class: IP5X Gjdpfev Ewpnsx Aftjbu Noise level: ≤ 70dB Compatible software: QuantAM, InfiniAM Camera, InfiniAM Spectral, Renishaw Central and selected third-party software (1) Build volume refers to the maximum build volume from wall to wall, however the usable area is usually smaller. The substrate plate is not included in the dimensions. (2) Maximum build rate does not include coating time and is dependent on parameters, part geometry and material. (3) Typical process speed depends on parameters, part geometry and material. (4) The calculated maximum load of the machine is 50 A, the nominal operating current is 32 A. (5) The user has the option to configure the network with their own control software. For more information see the RenAM 500 Series Additive Manufacturing System User Manual, Renishaw Part No. H-5800-3693. (6) Due to different electrical requirements in each country, the part numbers for the accessories may vary. Contact your country's customer service department if you have any questions about this. (7) Temperature and humidity must not be at the maximum specified at the same time and must remain below the value at which the dew point reaches 16 °C (61 °F) to avoid the formation of condensation on the laser components. See Site Preparation and Installation Guide for the RenAM 500 Series Additive Manufacturing System, Renishaw Part No. H-5800-3692.

Condition: new, 7 pieces heating coil new for a melting furnace Fulmina SOU 20E, Technical data: Reversible element with connection ends Ø 10 x 270 mm power: 10.000 Watt Voltage: 220 Volt cold resistance: 4,60 (± 5%) Ohm wire diameter: 4,50 mm coil inner Ø: 29 mm leg length: 240 mm Number of legs: 3 x 8 pieces Wire quality: CrFeAl Y Gbjdpfx Aod Tx A Eofteu 3 heating coils are a complete set in this model (the pictures of the melting furnace serve the representation and show the model in which the heating coils were installed, they fit however also into other models with smaller or higher achievement, it changes only the number of pieces) immediately available from stock

Condition: reconditioned (used), Melting and casting furnace for aluminum and ZnAl. The furnace is after a general renovation, new lining, specialized painted, functional. The furnace capacity for aluminum is approximately 3,000 kg. Suitable for melting with a gas, oxygen or oil burner. Godpsh Nycasfx Aftobu

Year of construction: 2014, condition: excellent (used), functionality: fully functional, Foundry electric induction melting furnace for melting of: - Steel - iron - aluminum - copper - brass - Bronze TECHNICAL DETAILS Nominal power: 1 ton Temperature: 1700 °C Gsdpfxslxnlfs Aftsbu Transformer capacity: KVA 800 Year of manufacture transformer: 2014 High voltage: 10 +- 2 x 2,5% kV current: 41,86 / 38,97 - 23,89 A Low voltage: 840 - 105 V Current: 464 - 275 A EQUIPMENT / SCOPE OF DELIVERY Hydraulic tilting Water cooling system

Condition: good (used), Year of construction: 1940, functionality: fully functional, type of input current: three-phase, total height: 4,000 mm, total width: 3,000 mm, total length: 6,000 mm, year of last overhaul: 2021, input voltage: 10,000 V, temperature: 1,600 °C, power: 1,200 kW (1,631.54 HP), overall weight: 30,000 kg, Klein Lichtbogen Ofen 3-5 tonen Kapazitaet, 1,2 MW/ 10 kV. Gbedpfx Aeg S U Dkeftou

Condition: refurbished (used), The production line includes Wolff CH300 75kW lift, drum boiler with Wolff mixer (No. 11012) 14bar steam, 198°C, 1380L, mixer 5.5kW, storage tank NM with scales and a press for crackers NM; the line is well preserved! Godpfx Afsr Iidlstobu

Condition: ready for operation (used), functionality: fully functional, The machine is used for melting fat and chocolate products. Gbsdpfxjvq N Rnj Aftou

Condition: ready for operation (used), Year of construction: 2007, operating hours: 18,179 h, functionality: fully functional, machine/vehicle number: B151707, turning length: 620 mm, turning diameter: 190 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 345 mm, distance between spindles: 970 mm, TECHNICAL DETAILS Maximum turning diameter: 190 mm Maximum turning length: 620 mm Maximum swing diameter over bed: 190 mm Swing diameter over cross slide: 190 mm Standard turning diameter: 170 mm Maximum distance between spindles: 970 mm Axis Travel X-axis 1: 345 mm X-axis 2: 167.5 mm Y-axis: +/- 45 mm Z-axis 1: 1,240 mm Z-axis 2: 685 mm B-axis: +/- 91° C-axis 1+2: 360° Main Spindle Maximum spindle speed: 4,500 rpm Power capacity - main spindle: 18.5 / 15 kW Spindle bearing diameter: 110 mm Spindle bore: 80 mm Maximum bar capacity: 65 mm Spindle nose: A2-6 Maximum chuck diameter: 165 mm C-axis: 0.001° Sub Spindle Gbsdpfx Ajxgpclsfteu Maximum spindle speed: 5,000 rpm Power capacity - sub spindle: 11 / 7.5 kW Spindle bearing diameter: 90 mm Spindle bore: 63 mm Maximum bar capacity: 51 mm Spindle nose: A2-5 Maximum chuck diameter: 165 mm C-axis: 0.001° Sub spindle traverse: 760 mm Upper Turret Number of tool stations: 24 Number of driven tool stations: 12 Shank diameter: 25 mm Bore shank diameter: 32 mm Indexing time: 0.2 - 0.7 s Chip-to-chip time: 3.0 s Maximum tool diameter: 80 mm B-axis: 182° Y-axis: 90 mm Lower Turret Number of tool stations: 24 Number of driven tool stations: 12 Shank diameter: 25 mm Bore shank diameter: 32 mm Indexing time: 0.2 - 0.7 s Chip-to-chip time: 3.0 s Maximum tool diameter: 80 mm Turret Tool Drive Spindle speed driven tool stations: 6,000 rpm Power capacity - driven tool stations: 5.5 / 3.7 kW Number of driven tool stations: 24 Maximum shank diameter (bolt): 25 mm / 32 mm Feeds Rapid traverse (X / Y / Z): 16 / 6 / 40 m/min Rapid traverse B-axis: 180°/s Rapid traverse C-axis: 600 rpm Feed rate X: max. 16,000 mm/min Feed rate Y: max. 6,000 mm/min Feed rate Z: max. 40,000 mm/min Creep feed: 0 - 1,260 mm/min Feed rate C: 1 - 4,800°/min MACHINE DETAILS CNC control: Fanuc 18 iTB Weight: 12,500 kg Electrical Data Frequency: 50 Hz Voltage: AC 200/220 V Maximum load: 198/180 A Main switch: 225 A Transformer voltage: 68.6 kVA Control voltage: DC 24 V Total power consumption: 77 kVA Operating Hours Spindle hours: 18,179 h Machine hours: 53,242 h Power-on hours: 99,999 h

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 16220C164110, MACHINE DETAILS Operating voltage: 400 V Power: 98 kVA Rated current: 198 A Three-phase current: 400 V Frequency: 50 Hz Gbjdpfsxfaxbsx Aftou

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, travel distance X-axis: 300 mm, travel distance Z-axis: 700 mm, turning diameter: 140 mm, turning height: 380 mm, turning diameter over bed slide: 250 mm, TECHNICAL DETAILS Turning diameter: 140 mm Swing diameter: 250 mm Turning height: 380 mm Gbsdpfoxf A Npjx Aftsu Travel paths Travel - X axis: 300 mm Travel - Z axis: 700 mm Spindle Spindle speeds: 1 - 6,000 rpm Drive power 40% duty cycle: 38.00 kW Spindle nose: DIN 55026 - size 6 Spindle bore diameter at front bearing: 110 mm Feed & Rapid Traverse X-axis feed rate: 1 - 30,000 mm/min X-axis rapid traverse: 30.00 m/min X-axis feed force: 9,000 N Z-axis feed rate: 1 - 40,000 mm/min Z-axis rapid traverse: 40.00 m/min Z-axis feed force: 10,000 N Tools Number of tools in turret 1: 11 Number of tools in turret 2: 11 Toolholder: VDI 40 MACHINE DETAILS Control: SINUMERIK 840D Total power requirement: 70.00 kW Machine weight: approx. 22.00 t Space requirements: approx. 5.80 x 8.60 x H3.80 m EQUIPMENT Chip conveyor Extraction unit Infeed and outfeed Reversing gripper