Used Board Turning for sale (11,882)

Condition: used, overall weight: 45,000 kg, Maus MTV4LSL500 Turning Machine/Drill. Weight 45,000 kg. Bwedoz Hc Npjpfx Aknju Delayed removal unit will be ready for removal by the end of September. Buyer responsible for removal, contractor must be licensed and insured.

Condition: good (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: M500.06133, overall weight: 15,000 kg, Emag VSC500 Vertical Turning Machine. Bwjdpfxsz Hc Nve Aknsu Condition Good. Weight 15,000 kg. Delayed removal unit will be ready for removal by the end of September. Buyer responsible for removal, contractor must be licensed and insured.

Condition: used, Year of construction: 2008, machine/vehicle number: LV082, overall weight: 44,000 kg, Pittler PV1250 Vertical Turning Machine/Drill. Weight 44,000 kg. Condition Machine needs work. Bwodpfx Akoz Hb U Rsnsu Delayed removal unit will be ready for removal by the end of September. Buyer responsible for removal, contractor must be licensed and insured.

Condition: good (used), Year of construction: 2020, In this offer you purchase a used collaboration board "Cisco Webex Board 85S" Object of sale: 1 x Cisco Webex Board 85S: approx. 21 boards in stock also available in size 70" and 55" Without stand/wall mount The Webex® Board is an all-in-one device that offers everything you need to collaborate with your teams in physical meeting rooms. You can present wirelessly, use whiteboards and make video and audio calls. And it securely connects to your virtual teams via the Webex service or via your Webex app-enabled devices, so you can take your meetings and content on the road. Condition: This offer is for a used device that may show signs of use (minor scratches or yellowing). Bwodpfxjqydw Ij Aknsu (minor scratches or yellowing). The device has been tested for functionality Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before dispatch or collection. For further information, you can of course also contact us personally.

Year of construction: 2001, condition: good (used), Paris/CATECH side board edger. Year of production 2001 Capacity: about 30 boards/min. In 2021 the machine underwent a major modernization, including replacement of servo valves, new control and measurement by MADREW. A new plank measuring system was rebuilt based on existing measuring sensors. The machine was dismantled in March 2024 due to replacement with a new more efficient edger manufactured by MADREW The range includes: board separator, measuring feeder, edger, distribution conveyor, electrical and control cabinets, hydraulic power unit. Bjdpfx Aortn Nzsknjwu

Condition: like new (used), functionality: fully functional, Year of construction: 2017, machine/vehicle number: DS 013.0091, RAW MATERIAL TOWER PME YOC 2017 TWIN SCREW EXTRUDER WEBER Type : DS 1327 YOC 2017 DIE NORDSON YOC 2017 CALANDER OMIPA Bwodpfxsz Dt Sps Akneu Serial 09.38A24 YOC 2017 ROLL PLANA OMIPA Serial 09.38A24 YOC 2017 THICKNESS & DENSITY MEASUREMENT SEREL Serial 4031 YOC 2019 AIR BLOWERS & COOLING CHAPEL OMIPA Serial 22.10A88 YOC 2017 PULL ROLERS AND EDGERS OMIPA Serial 11.35A19 YOC 2017 2 BREAKERS TRIA YOC 2017 GUILLOTINE OMIPA Serial 16.30A19 TRANSPORTATION BELT OMIPA Serial 17.02A49 YOC 2017 10x TRANSPORTATION BELT BIELE WEIGHING BELT BIELE STACKER / ROBOT FANUC Serial E16Y3413 Type A05B-2612-B081 YOC 2016 Load 140 kg 2 SIDE SANDER COSTA Serial LB643001A Type KK9CCCC2200 YOC 2017 PORTAL STACKER BIELE Serial A6213-24 YOC 2017 LASERPRINTER MASCA ID TECHNICAL DETAILS Width : 2000 mm Extruder output : 1250 kg / hr ( possibly 1400 kg / hr ) Raw material PVC Raw material supply is a mixture of powders, ground recycled, micronised recycled Output is PVC plates size 2000 x 1390 x 3,75 mm Elecricity consumption : 41 000 KWH for 5 days production incl startup and stop of the line incl sander and extraction

Year of construction: 1999, condition: not inspected (used), overall weight: 6,650 kg, Brand: INDEX Type: G300 Bsdpez Ii Rcsfx Aknowu Year of build: 1999 Serial number: 500311 Chip conveyor: true CNC control, brand, type: Sinimerik 840C Engine power (kW): 35 kW Electric connection: 400 V Machine weight: 7160 kg Dimension l: 5200 mm Dimension w: 3300 mm Dimension h: 2600 mm Terms of delivery: Ex foundation-unpackaged Additional information: Incl. DSL - AES-GAMMA 30 - Suction

Condition: used, Year of construction: 2007, operating hours: 21,999 h, turning length: 170 mm, turning diameter: 140 mm, spindle speed (max.): 8,000 rpm, controller model: Mitsubishi Meldas, TECHNICAL DETAILS Turning diameter: 42 / 140 mm Turning length: 170 mm Spindle speed: 80–8,000 rpm C-axis: 0.001° Number of turrets: 2 Bwodpfez Ia Rgjx Aknsu Tool positions per turret: 12 Tool holder: VDI 20 Spindle speed for driven tools: 45–4,500 rpm Sub-spindle distance: 42 mm Spindle power: 1 kW Spindle speed: 60–6,000 rpm C-axis: 0.001° MACHINE DETAILS Control system: Mitsubishi Meldas Number of controlled axes: 8 Simultaneously machinable axes: 7 Collet chuck: 48 DIN 6343 Dimensions & Weight Footprint: approx. 2.4 × 1.6 × 2.2 m Machine weight: approx. 3.3 t Operating hours: 21,999 h EQUIPMENT Various tool holders, see images 5 axial driven tool holders Collet chuck for pressure collets, type 173E 15 pressure collets, type 173E Additional coolant cooler Chip conveyor Knoll, year of manufacture 2018 Simultaneous operation with 7 axes on main and sub-spindle Note: Complete battery replacement on 22.12.2025

Condition: good (used), Scherer Feinbau PM 1 FZ precision lathe, finishing lathe, lathe similar to Weiler, with extensive accessories as shown in the pictures. Bjdpfx Akjz Ip Rionswu Equipment: - Hand lever cross slide with Multifix quick-change system design - Collet chuck with draw-in collets Technical data: - Spindle bore: - Spindle speeds: 700/1400/2800 (left/right) - Center height: 110 mm - Center distance: 160 mm - Largest diameter over bed: 220 mm Accessories: Draw-in collets 359 E K 23 as shown in the pictures. Shipping by arrangement.

Condition: used, Year of construction: 2006, functionality: fully functional, turning diameter: 1,000 mm, controller model: Siemens 840 D, tool length: 500 mm, number of slots in tool magazine: 44, TECHNICAL DETAILS Working area Swing diameter: 1,000 mm Swinging diameter: 1,000 mm Z-axis travel: 900 mm Bedpfx Aez Hmc Teknswu MACHINE DETAILS Control system: Siemens 840 D Tool holders: SK 50, VDI 60 Tool magazine: 44 positions Tool weight: max. 35 kg Tool length: max. 500 mm

Condition: good (used), Year of construction: 2003, operating hours: 19,200 h, functionality: fully functional, We are offering a DUS 800 ti turning machine manufactured by Boehringer—built in 2003. The machine has been used in single-shift operation up to now. As shown in the photos, the machine is being sold with additional equipment (steady rest, tailstock, 800 mm faceplate with jaw sets, jaws for a 500 mm chuck, and size 4 tool holder). Manuals for the machine are available. The DUS 800 ti is in fully functional condition and is available immediately. An inspection of the machine on power is possible at any time. Bedpfxez D Uqyo Aknjwu Please refer to the attached document for technical specifications. The sale is on an “bought as seen” basis without warranty, Incoterms 2020 “EXW” Heubach, Germany. Responsibility for disassembly and loading on truck by buyer. The seller may provide assistance. Inspection and delivery date by arrangement.

Condition: used, Year of construction: 2012, functionality: fully functional, Manufacturer: SPINNER Werkzeugmaschinenfabrik Model: TC600-65-MCY Year of manufacture: 2012 Control system: Siemens Sinumerik 840D / ShopTurn Machine type: CNC turning/milling center Y-axis: +50 / -40 mm = 90 mm X-axis travel: 275 mm Z-axis travel: 700 mm Bsdpfx Aoz Iqf Usknjwu Max. swing diameter: 600 mm Max. turning diameter: 400 mm Max. turning length: 650 mm Spindle bore: 65 mm Rapid traverse X/Z: 15 / 24 m/min Main spindle max. speed: 4,000–5,000 rpm, depending on spindle design Spindle power: approx. 14/18 or 18/22 kW, depending on design Spindle torque: approx. 267/348 Nm or up to approx. 250 Nm Chuck: 250 or 315 mm Turret: 16-position Tool holder: VDI 30 or BMT45 possible for MCY design Driven tools: up to 16 stations Driven tool speed: up to 5,000 rpm Y-axis: available C-axis: available Tailstock: CNC tailstock, MK4 Tailstock stroke: approx. 570 mm Chip conveyor: Weight: approx. 5,600–5,800 kg

Condition: good (used), Year of construction: 2003, functionality: fully functional, turning length: 600 mm, turning diameter: 324 mm, travel distance X-axis: 260 mm, travel distance Z-axis: 635 mm, rotational speed (max.): 5,000 rpm, bar passage: 65 mm, GILDEMEISTER CTX 420 linear V3 Year of manufacture: 2003 Control system: Heidenhain Plus IT / DataPilot Machine type: CNC turning machine Design: C-axis and driven tools Working area: Swinging diameter over bed: 680 mm Swinging diameter over cross slide: 565 mm Max. turning diameter: 324 mm Max. turning length: approx. 600–635 mm Travel in X-axis: 260 mm Travel in Z-axis: 635 mm Main spindle: Speed range: 20–5,000 rpm Drive power: 37 / 25 kW Max. torque: approx. 390 / 270 Nm Bar diameter: approx. 65 mm Spindle bore: approx. 79 mm Tool turret: 12-position Sauter tool turret Tool holder: VDI 30 Driven tool stations: up to 12 Speed of driven tools: up to approx. 4,500 rpm Power of tool drive: approx. 12.2 kW C-axis: C-axis available Rapid traverse rates: Rapid traverse rate X-axis: up to 60 m/min Rapid traverse rate Z-axis: up to 45 m/min Bedpfsz Iqc Hox Aknjwu Tailstock: Tailstock available Arbor mounting: MK 5 Tailstock travel: approx. 580 mm Machine data: Machine weight: approx. 6,000–6,500 kg Dimensions L x W x H: approx. 3,500 x 2,460 x 2,100 mm Typical equipment: Driven tools C-axis 12-position turret Tailstock Chip conveyor Coolant system

Condition: like new (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: M134377I2WA, turning diameter: 300 mm, spindle speed (max.): 5,000 rpm, rotational speed (max.): 2,500 rpm, workpiece weight (max.): 30 kg, total height: 3,300 mm, total length: 2,200 mm, total width: 3,400 mm, overall weight: 9,600 kg, Equipment: documentation/manual, rotational speed infinitely variable, Fully automated Hwacheon Hi-TECH CNC lathe with WEKAL portal system including robot Base: Hwacheon Hi-TECH 450BL YSMC (Siemens) Year of manufacture 2024 | Like new | Manufacturer's warranty until 03/26/2027 - transfer possible after coordination with the manufacturer | Immediately available Highlights ✓ Year of manufacture 2024 ✓ Automatic door drive ✓ Like new condition ✓ Robot interface ✓ Fully functional ✓ Stroke monitoring ✓ High-pressure coolant system ✓ Siemens SINUMERIK with ShopTurn ✓ Oil/emulsion mist filter ✓ DXF reader integrated ✓ Fully automatic WEKAL portal system ✓ Y-axis ±60 mm ✓ WEKAL WRB roller conveyor ✓ Counter spindle 4,000 rpm ✓ Robot gripper module ✓ Driven tools up to 5,000 rpm ✓ Complete documentation ✓ Torque upgrade ✓ Ongoing maintenance with records ✓ Completely automated manufacturing cell The system is designed for the automated machining of round material. Workpiece range: • Diameter 50–300 mm • Workpiece weight up to 30 kg The WEKAL automation system handles the loading and unloading of workpieces and enables economical, low-manned operation. WEKAL WPA portal system • 2-axis portal system • X-beam 7,000 mm • X-travel approx. 5,500 mm • Z-travel approx. 1,800 mm • WRB roller conveyor conveying length 10,000 mm • 20 workpiece carriers • Robot gripper module with quick-change system Bwodpfjzhltcjx Aknsu Machine equipment • Siemens ShopTurn • ProfiNet • Touchscreen • DXF reader • Network drive management • Geared spindle 22/18.5 kW • 2,500 rpm • Y-axis ±60 mm • Counter spindle • Driven tools 5,000 rpm • Torque upgrade • High-pressure cooling • Oil mist extraction • Chuck flushing • Chuck blow-out • Stroke monitoring • Automatic door drive • Robot interface Documentation and condition The system is in like-new and fully functional condition. • complete documentation available • ongoing maintenance including records • manufacturer's warranty until 03/26/2027, transferable after coordination with the manufacturer • short-term availability The system can be inspected while powered on. Extensive accessories available (chuck jaws, gripper jaws, tool holders, driven tools, etc.) Training and instruction possible. Programming and setup of your components possible. Sale ex works. Buyer organizes disassembly, loading and transport.

Condition: like new (used), Year of construction: 2019, operating hours: 3,500 h, functionality: fully functional, bar passage: 117 mm, overall weight: 8,500 kg, The Hyundai WIA L400MC is in like-new condition. Inspection under power is possible at any time. Model: Hyundai WIA L400MC Design: Standard Bore Swinging diameter over bed: Ø 780 mm Swinging diameter over slide: Ø 535 mm Max. turning diameter: Ø 560 mm Max. turning length: 1,180 mm Bar capacity: Ø 117 mm Chuck size: Ø 381 mm (15") Max. spindle speed: 2,000 rpm Spindle motor power (max./continuous): 37 / 30 kW Spindle torque (max./continuous): 3,073 / 2,490 Nm Spindle drive: Belt drive with 2-speed gearbox Spindle taper: A2-11 C-axis: 0.001° Travel distances X-axis: 320 mm Z-axis: 1,200 mm Bwsdsz Ibaiopfx Akneu Rapid traverse X/Z: 20 / 25 m/min Guideways X/Z: Box guide / Flat guideways Number of tool stations: 12 Tool holder, outer diameter (OD): □ 32 mm Tool holder, inner diameter (ID): Ø 63 mm Turret indexing time: 0.2 s Mount: BMT75P Driven tools Motor power (max./continuous): 7.5 / 5.5 kW Max. speed: 4,000 rpm Torque (max./continuous): 44.7 / 35 Nm Collet size: Ø 26 mm (ER40) Tailstock Tailstock taper: MK5 (integrated) Quill diameter: Ø 150 mm Quill stroke: 132 mm Tailstock travel: 1,100 mm Additional technical data Coolant tank: 300 liters Lubricant tank: 2 liters Electrical connection: 46 kVA Recommended cable cross-section: > 50 mm² Voltage / Frequency: 220 V / 60 Hz or 200 V / 50 Hz Footprint (L x W): 4,202 x 2,207 mm Machine height: 2,153 mm Machine weight: approx. 8,500 kg Control: HYUNDAI WIA FANUC i Series / FANUC 32i-B

Condition: good (used), Precision lathe Scherer Feinbau PM 1 FZ Bsdpfx Asz Iptwsknewu Precision lathe Scherer Feinbau PM 1 FZ, finishing lathe, lathe similar to Weiler, with numerous accessories as shown in the pictures. Equipment: - Collet chuck with draw-in collets Technical data: - Spindle bore: - Spindle speeds: 700/1400/2800 (left/right) - Center height: 110 mm - Center distance: 160 mm - Largest swing over bed: 220 mm Accessories: Draw-in collets 359 E K 23 as shown in the pictures Coolant system Shipping by arrangement.

Condition: like new (used), Year of construction: 2024, functionality: fully functional, Max. turning diameter. 400 mm Turning length. 650 mm Bsdpfez Hyy Esx Aknowu Circumferential diameter. 600 mm X-axis travel. 275 mm Z-axis travel. 700 mm Bar capacity. 85 mm Main spindle. 3,400 rpm for 85 mm bore Spindle nose. A8 / DIN A8 Chuck Driven tools. MC = Milling/driven tools Control system. Siemens 16-station BMT45 turret, axial - all stations driven Chip conveyor in the tailstock High-pressure pump, 15 bar Siemens Sinumerik One Measuring probe for tool measurement in the work area Direct measuring system in the X-axis Automatic door

Condition: ready for operation (used), Year of construction: 2005, operating hours: 10,223 h, functionality: fully functional, machine/vehicle number: 1278R18TBF, turning length: 720 mm, turning diameter over cross slide: 530 mm, turning diameter: 320 mm, spindle speed (max.): 4,000 rpm, spindle bore: 65 mm, travel distance X-axis: 270 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 720 mm, bar passage: 65 mm, total height: 2,100 mm, total length: 4,300 mm, total width: 2,000 mm, overall weight: 4,200 kg, number of tool stations in tool turret 3: 12, Due to the closure of the business, an AMV Angelini Oscar turning machine with a Y-axis and counter-spindle is for sale. The machine is very well equipped – 3-jaw chuck for the main and counter-spindle, collet chuck Hainbuch for the main and counter-spindle, parts catcher, prepared for a bar feeder, chip conveyor. High-pressure pump, 12 powered tool stations VDI30. Control system: Fanuc 21 I-TB series. Bwodpey S R Atofx Akneu Numerous accessories are included, such as turning tool holders and powered tools. The machine is still connected to power and can be inspected by arrangement. Price includes loading onto a truck (FCA).

Condition: used, Year of construction: 2018, operating hours: 23,532 h, functionality: fully functional, turning length: 550 mm, spindle motor power: 31,500 W, spindle speed (max.): 6,000 rpm, spindle bore: 65 mm, travel distance X-axis: 110 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 320 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 50 m/min, rotational speed (max.): 6,000 rpm, type of input current: three-phase, torque: 170 Nm, bar passage: 65 mm, total height: 2,490 mm, total length: 6,910 mm, chuck outer diameter: 160 mm, total width: 2,092 mm, bar diameter (max.): 65 mm, spindle nose: 140, overall weight: 9,000 kg, feed force X-axis: 5,000 N, feed force Y-axis: 5,000 N, feed force Z-axis: 5,000 N, Equipment: documentation/manual, rotational speed infinitely variable, For sale is an INDEX C200 CNC lathe, manufactured in 2018, from our own machine inventory. The machine is fully functional and can be inspected and demonstrated in operation at our location. The C200 features extensive equipment, including a main and counter spindle, three tool carriers, and driven tools, making it particularly suitable for the economical series production of complex precision turned parts. Technical data / Equipment: - Manufacturer: INDEX - Model: C200 - Year of manufacture: 2018 - Control system: INDEX C200-si based on Siemens Sinumerik 840D SolutionLine - Main spindle D65 - Counter spindle D65 - Workpiece diameter: max. 65 mm - Main spindle speed: max. 6,000 rpm - Counter spindle speed: max. 6,000 rpm - 3 tool carriers - 14 stations per tool carrier - Driven tools - Y-axis on tool carriers 1 and 2 - C-axis on main and counter spindle - Coolant high-pressure supply - Chip conveyor - Part removal / gantry removal system - Interface for bar loader magazine UNIMAG4 - iXpanel operating interface - Connection: 400 V / 50 Hz - Rated power: 54 kW - Connected power: 65 kVA - Rated current: 94 A - Max. fuse rating: 100 A The equipment with three tool carriers, a main and counter spindle, and the existing automation and peripheral technology enables flexible and productive complete machining of series parts. The technical configuration is documented in the original INDEX order confirmation. 20260930101605 Bwsdjz Hmxnopfx Aknou Current operating hours according to the machine control system: - Total operating time: approx. 23,532 h - Hydraulic system: approx. 22,288 h - Spindle/drive operating times according to the operating hour counter: - S1: approx. 2,298 h - S2: approx. 4,189 h - S3: approx. 1,954 h - S4: approx. 5,998 h - S5: approx. 8,006 h The machine is currently located at our facility and can be inspected and demonstrated in operation after prior arrangement. We would be happy to provide further detailed images, technical documentation, and an official offer with a detailed list of equipment upon request.

Year of construction: 2020, condition: excellent (used), functionality: fully functional, USED YAMAZAKI MAZAK HORIZONTAL MILLING AND TURNING CENTER INTEGREX J-200 X 500 with Smooth G CNC Bwjdpfx Asz Ihmpsknou - 36-tool magazine package (500U) - 15 kW AC turning spindle power - B-axis with mechanical locking every 1° - 15 bar coolant through the milling spindle and onto the flange - Lateral chip conveyor with belt (500U) - High/low pressure selection (requires opening/closing of the chucks with the spindle stopped) - Radio probing system - Renishaw RMP60 (complete system including probe and Mazatrol probing cycles, excluding the Renishaw "Inspection Plus" software) - SEI FILTRATION system - Tooling and mandrel kit Complete with operating manuals, CE certification, and standard accessories.

Condition: good (used), Year of construction: 2016, operating hours: 23,500 h, machine/vehicle number: 8107000021B, spindle bore: 32 mm, spindle speed (max.): 8,500 rpm, overall weight: 4,300 kg, total length: 7,500 mm, total height: 2,500 mm, total width: 1,600 mm, number of spindles: 2, Equipment: documentation/manual, DMG MORI GILDEMEISTER SPRINT 32/5 – Short/Long Turning Center Well-maintained machine, low operating hours, including IEMCA BOSS 338/32 HD bar feeder (up to 3,200 mm bar length), year of manufacture 2016, as well as conversion kit to long turning center (Swisstype kit) for short and long turning on one machine. Delivery conditions: Free on truck. Location: 58332 Schwelm Availability: Immediate - by arrangement NOTE: The machine must be picked up on a fixed date in mid/late October 2026; the exact date will be provided in advance! Payment terms: Payment in advance - by bank transfer. Technical data: Control: FANUC 32i MB Operating hours recorded: 25,263 Spindle hours recorded: 22,772 MAIN SPINDLE DATA: Max. turning diameter: 32 mm (bore for draw tube: 38 mm) Stroke Z1: 100 mm Max. speed: 8,500 RPM Drive power S1: 5.5 kW COUNTER SPINDLE DATA: Max. turning diameter: 32 mm (bore for draw tube: 38 mm) Stroke Z2: 200 mm Max. speed: 8,500 RPM Drive power S1: 2.2 kW AXIS DATA X1: Travel: 70 mm Max. speed: 40 m/min Max. acceleration: 5 m/s² AXIS DATA Y1: Travel: 405 mm Max. speed: 30 m/min Max. acceleration: 5 m/s² AXIS DATA X2: Travel: 300 mm Max. speed: 40 m/min Max. acceleration: 5 m/s² TOOL HOLDER DATA – SLIDE 1: Diameter of tool holder: 25 mm Number of fixed tools for external machining: 6 Tool holder size: 16 × 16 mm Number of driven tools: 4 Collet type: ESX20 TOOL HOLDER DATA – SLIDE 2: Number of fixed tools for internal machining: 4 Diameter of tool holder: 25 mm Scope of supply: Bwjdpfx Ajzxhdljknsu IEMCA BOSS 338/32 HD bar feeder (up to 3,200 mm bar length), year of manufacture 2016 Chip conveyor Available manuals Accessories as shown in the pictures Dimensions & weights: Installation dimensions L x W x H approx.: 7500 x 1600 x 2500 mm Weight approx.: 4300 kg Attention: Disc damaged! If you have any questions or would like to arrange a viewing, please do not hesitate to contact us! Additional notes: ►If desired, we can offer transport to the destination. ►The quoted price is net plus VAT. ►The goods are sold excluding any warranty. ►Technical data is without guarantee. ►Subject to prior sale. ❗The sale of the goods is exclusively to business customers❗

Condition: excellent (used), Year of construction: 2014, operating hours: 14,500 h, functionality: fully functional, machine/vehicle number: 11779, turning length: 700 mm, turning diameter: 250 mm, spindle motor power: 26,000 W, spindle speed (min.): 3,200 rpm, spindle speed (max.): 3,200 rpm, spindle bore: 65 mm, overall weight: 8,500 kg, includes 2x Hainbuch chucks conveyor belt measuring probe, swiveling, with 2 heads MANUAL GUIDE_Dialog programming high-pressure pump, 18 bar/20 l/min Bwedpfxerdy Uqe Aknsu SBS tool breakage monitoring, wear control Machine manufactured in 2013 - put into operation in May 2014 in good and well-maintained condition new price approx. €300,000 !!! ATTENTION -> Sold without loader!!!

Condition: used, Year of construction: 2012, functionality: fully functional, Manufacturer: MORI SEIKI CO., LTD. (Japan) Machine model: NLX2500SY Year / Month of manufacture: August 2012 (08 / 2012) Machine weight: 6,360 kg Electrical connection: 3 phases / 50 Hz / 200 V AC Full load current: 144 A Spindle motor current: 177 A Connected power: 50 kVA Main technical specifications Working area & travels: Max. turning diameter: approx. 366 mm Bsdpfxoz Hwkno Aknswu Max. turning length: approx. 705 mm Swinging diameter over bed: 920 mm X-axis travel: 260 mm Y-axis travel: ±50 mm (100 mm) Z-axis travel: 795 mm Max. bar diameter: 80 mm Main spindle: Speed range: max. 4,000 rpm Drive power: 18.5 / 15 kW Spindle nose: JIS A2-8 Chuck size: 10 inches Counter spindle: Speed range: max. 6,000 rpm Drive power: 11 / 7.5 kW Chuck size: 6 inches Tool turret: Number of tool stations: 12 stations (powered) Speed of powered tools: max. 10,000 rpm Power of powered tools: 5.5 / 4.2 kW

Condition: used, Year of construction: 2017, functionality: fully functional, X-axis (planar travel): 195 mm (approx. 7.67 inches) Z-axis (longitudinal travel): 400–430 mm Tailstock travel / quill travel: 100 mm (quill stroke) Rapid traverse X-axis: 30 m/min Rapid traverse Z-axis: 30 m/min C-axis (spindle indexing): 0.001° (for driven tools / MC version) Center height: 1,000 mm Max. spindle speed: 3,500 rpm Max. chuck diameter: 10 inches Max. chuck speed: 4,200 rpm Max. working area (diameter x length): Ø 325 mm x 302 mm Machine weight: 4,350 kg Bwedpfxjz Hwais Aknju Operating voltage: 3 PE / 220 V (AC) Rated frequency: 50 Hz Electrical connections / power: 30 kVA Rated current: 100 A Short-circuit current strength: 5 kA Largest motor: 80 A Circuit breaker capacity: 100 A Switching capacity of protective device: 50 kA Compressed air supply: 0.5 MPa (5 bar)

Condition: good (used), Year of construction: 2004, functionality: fully functional, turning length: 511 mm, turning diameter: 380 mm, travel distance X-axis: 230 mm, travel distance Z-axis: 575 mm, rotational speed (max.): 5,000 rpm, bar passage: 65 mm, MAZAK QUICK TURN NEXUS 200 MS Year of manufacture: 2004 Control system: Mazatrol 640T Nexus Machine type: CNC turning machine Configuration: Main and counter spindle, C-axis, driven tools Working area: Max. swing diameter: 675 mm Max. turning diameter: 380 mm Max. turning length: 511 mm Max. bar diameter: 65 mm Main spindle: Speed range: 35 – 5,000 rpm Drive power: 26 kW Continuous power: 22 kW Max. torque: 350 Nm Spindle bore: 76 mm Spindle nose: A2-6 C-axis resolution: 0.001° Counter spindle: Speed range: 35 – 6,000 rpm Drive power: 10 kW Continuous power: 7.5 kW Bjdpfx Ajz Ipvxoknswu Max. torque: 75 Nm C-axis resolution: 0.001° Tool turret: Tool positions: 12 Driven tools: available Speed of driven tools: 25 – 4,500 rpm Drive power: 5.5 kW Max. torque: 35 Nm Travel distances: X-axis: 230 mm Z-axis: 575 mm Rapid traverse X-axis: 30 m/min Rapid traverse Z-axis: 33 m/min Machine data: Total connected load: approx. 46.2 kVA Machine weight: approx. 5,100 kg Dimensions L x W x H: approx. 2,800 x 1,800 x 1,850 mm