Used Sinter for sale (99)

Condition: excellent (used), Year of construction: 2020, machine/vehicle number: 1787, functionality: fully functional, temperature: 1,150 °C, total length: 23,700 mm, conveyor belt width: 620 mm, heating capacity: 320 kW (435.08 HP), pass-through height: 100 mm, The system has seen very little use and is in excellent condition. TECHNICAL DETAILS Maximum operating temperature: 1150°C Belt width: 620 mm Installed heating capacity: 320 kW in 8 zones Fuel: Natural gas Operation: Hydrogen + Nitrogen (N2 + H2) integrated Usable height: 100 mm Lrsdezclphjpfx Al Tsn Dimensions Infeed table length: 2 m Burn-off zone LED3 length: 1.5 m Sintering zone length: 7.5 m Rapid cooling zone length: 1 m Convective cooling zone length: 2 x 4 m Flame-free outlet with air shower length: 2 m Outlet table length: 2.7 m Total system length: 23.7 m Total system width: 2.3 m MACHINE DETAILS Natural gas consumption: 25 m³/h (80 mbar) N2 consumption: 45-65 m³/h (max. 80 mbar) H2 consumption: 0.5 - 15 m³/h (80 mbar) Cooling water: 3-5 m³/h (non-pressurized; temperature) EQUIPMENT Flame-free outlet Ceramic muffle Dual thermocouples Programmable Online diagnostic system Low NOx RS recuperative burners SiSiC burner tubes LED 3 de-waxing zone (utilizes the chemically bound energy of waxes and improves burn-off conditions, especially for heavy powder metallurgy parts (>0.9 kg)) "Target-Actual value belt speed comparison" function

Condition: excellent (used), Eos EOSINT plastic laser sintering systems Here, we offer an Eos EOSINT plastic laser sintering system. Eos EOSINT plastic laser sintering system P385 The following items are included with the EOS P385 system: Build chamber Powder container Cooler: Termo TEK Thermochiller 1100 The following upgrade has already been carried out: Software: CDs Eosint P3 process software PSW 3.2 for Windows 2000, XP Materialise: Magics RP 9.0 Machine upgrade from P360 to P385 on August 10, 2007 Laser replacement on May 15, 2008 X-axis drive motor replacement with a used motor on May 4, 2020 Pyrometer replacement on June 30, 2020 350mm x 350mm x 610mm Voltage 3/N/PE/400V, Frequency 50 Hz Connected load 8 kW, Fuse rating 32 A MAX. laser power 100 W, Laser class open 4 Laser class closed 1 Ljdpfszdyx Esx Al Tsrn Weight 850 kg Type: EOSINT Upgrade P385 Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and specifications are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: excellent (used), Eos EOSINT We are offering an Eos EOSINT plastic laser sintering system for sale. The EOS P380 system includes the following components: Build chamber container Powder container Overflow container 3DM 8-zone process chamber heater, 250°C Each zone individually adjustable, homogeneous temperature field ± 1°C Kelvin Build volume: 350mm x 350mm x 610mm Power supply: 3/N/PE/400V AC Frequency: 50 Hz Connected load: 8 kW Fuse protection: 32 A Maximum laser power: 100 W Laser class (open): 4 Laser class (closed): 1 Weight: 850 kg Model: EOSINT P 380 Condition: used Scope of delivery: (see picture) Ljdszdyxljpfx Al Tsrn (Technical data subject to change and errors excepted!) For further questions, feel free to contact us by phone.

Condition: excellent (used), Eos EOSINT plastic laser sintering systems Here, we offer an Eos EOSINT plastic laser sintering system. Eos EOSINT plastic laser sintering system P380 The following items are included with the EOS P380 system: Build volume container Powder container Overflow container Cooler: Termo TEK thermochiller, type: 802-18644-3 Unpacking ram Removal carriage 3DM 8-zone process chamber heater 250°C Each zone can be adjusted individually, homogeneous temperature field ± 1°C Kelvin 350mm x 350mm x 610mm Voltage 3/N/PE/400V AC Frequency 50 Hz Connected load 8 kW Fuse 32 A MAX. laser power 100 W Laser class open 4 Lsdpfxezdywzo Al Tsrn Laser class closed 1 Weight 850 kg Type: EOSINT P 380 Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: ready for operation (used), A DeguDent high-temperature sintering furnace for dental zirconium oxide for sintering pre-sintered zirconium oxide crowns, bridges and frameworks is available. Temperature: 1350°C, machine dimensions X/Y/Z: approx. 500mm/650mm/550mm, weight: approx. 80kg. An on-site inspection is possible. Ljdpfx Ajzfp Irol Tsrn

Condition: excellent (used), Year of construction: 1995, Year of manufacture: 1995, sintering vacuum furnace Ljdpfx Aloyq Iy Se Torn

Condition: like new (used), Type: Farsoon FS HT1001P System configuration: build station, preheating station, cooling station Automated job changeover between two build cylinders Scanner from Chinese manufacturer, deviates from standard series Modifications and condition: - Overflow system upgraded with automatic draining - Laser protection windows renewed, approx. 200 operating hours - Heating elements replaced, approx. 500 operating hours - IR camera ports available (cameras not included) - Curtains installed in build chamber - Printer operating hours: less than 2,000 h Dimensions: 5,585 × 3,410 × 2,980 mm Weight: approx. 5,000 kg Maximum build size: 1,000 × 500 × 450 mm Build chamber throughput: up to 15 liters per hour Scanner: 2 × high-precision 3-axis galvo system Scan speed: up to 15.2 m/s Layer thickness: 0.06 – 0.3 mm Laser: 2 × CO₂ lasers, each 100 W Maximum chamber temperature: 220 °C Thermal control: multi-zone heating with intelligent temperature management Temperature regulation: real-time monitoring and optimization Operating system: 64-bit Windows 7 File format: STL Software functions: manual and automatic control, real-time parameter adjustment, 3D visualization and diagnostics Recommended materials: FS3300PA, FS3250MF, FS3400GF, FS-TPU Voltage: AC 380 V, 3 phase, N/PE Frequency: 50 to 60 Hz Total power: 25 kW Maximum current: 45 A Voltage fluctuation: ± 10% Protection: 3 × 50 A Preheating station: - No active preheating - Used for storing build cylinders for automated changeover - Roller blinds as protection from crushing and burning hazards Cooling station: - Nitrogen flooding with sealing - Surface temperature measurement of powder cake - Roller blinds as safety feature Cooling system (Deltatherm): - Compressor power: 1.32 kW - Pump power: 0.45 kW - Flow rate: approx. 18 l/min - Pump pressure: approx. 5.0 bar - Cooling medium: potable water - Connections: supply and return, 3/4" female thread - Tank volume: approx. 30 l - Air volume: approx. 2,250 m³/h - One axial fan - Fan power: 135 W - Dimensions: W 740 mm, D 740 mm, H 500 mm - Weight: approx. 110 kg Unpacking station (Powder Breakout Station): - Dimensions: 1,870 × 920 × 2,150 mm - Weight: approx. 1,200 kg - 200–240 V - Frequency: 50–60 Hz - Total power: 2 kW - Max current: 10 A Powder handling Schleiss RPTech: - Function: mixing, sieving, and conveying plastic powders - System creates a fully enclosed powder cycle - Components: powder mixing unit with mixer and sieving machine, containers for mixed powder, overflow powder, used powder, and fresh powder - Pumps for material transport between containers - Humidification module included - Vibrating motor for sieve not included Powder handling mixing and sieving system technical data: - Dimensions: 1,800 × 815 × up to 2,600 mm height - Weight: approx. 240 kg - Temperature range: 0 – 40 °C - Mixing throughput: approx. 10 l in 8 min - Sieving throughput: 5 kg in 3 min - Voltage: 230 V at 50 Hz, 16 A protection - Mixer power: 210 W - Extraction power: 2,200 W - Air requirement: approx. 100–140 l/min - Operating pressure: 5–6 bar Lrsdoy Hg S Tjpfx Al Ton Condition: used Scope of delivery: (see picture) (Technical data subject to change and error!) Further questions gladly answered by phone.

Condition: good (used), Transitube mixing system for mixing laser sintering material, including conveying via screw conveyor. Ljdpfx Aoyzamgjl Torn

Condition: good (used), debinding and sintering chamber furnace, make Nabertherm Lrodpfx Asmfn Rusl Tjn type: LH 280/13 DBS temp. max.: 1300°C internal dimensions (w x d x h): 750 x 750 x 500 mm external dimensions (w x d x h): 1250 x 1750 x 2100 mm loading weight : max. 150 kg power: 44 kW heating: 5-sides heated control zones: 1 weight: 700 kg voltage: 400 V 3/N current consumption: 63 A PLC: Siemens S7 control cabinet: brand new - with an air heater under the furnace, pre-heated air with a temperature of up to 400°C can be flushed into the furnace chamber during the debinding phase. - controllable cooling housing with autom. ball valve - automatic exhaust damper - automatic exhaust flap - monitoring of fresh and exhaust gas volume flow, as well as furnace chamber pressure by differential pressure monitor. -The furnaces themselves, particularly the brickwork, heating elements, and insulation, are in excellent condition with low or no working hours, making them practically like new.

Condition: excellent (used), Eos EOS P 396 | PSW 3.8 – Industrial 3D Printer (Laser Sintering System, SLS, CO₂ Laser) The machine has been serviced regularly (last service: 08/2024). It has exclusively processed PA11 (EOS PA1101). The system is offered including accessories: 1 x build box, docking station, multibox with cooler Operating hours: 5,962.3 h "The printer has been equipped with a new IntelliScan III scanner including a laser deflection head and has been thoroughly inspected." For sale is an EOS P 396 with PSW 3.8, a high-precision industrial system for additive manufacturing (Selective Laser Sintering, SLS). The system is suitable for the production of complex plastic components for both series and prototype manufacturing. Base machine with control cabinet & control terminal Exchangeable frame with build platform Blade cassette II (blue) Software: Windows 7 Process software (PSW) EOSTATE Basic Parameter set: PA 2200 Balance Cooling system (termotek): Cooling capacity: 1,400 W at 20°C water / 18°C process water Pump capacity: 5 l/min at 3.5 bar Electrical power: 230 V, 50/60 Hz, 7.5 A Refrigerant: R134a (max. charge: 420 g) Multibox is a typical EOS accessory for powder handling, used for transporting and interim storage of material. Technical Data: Laser and Optics: Laser type: CO₂ laser Rated power: 70 W Wavelength: 10.55 – 10.63 μm Laser safety class: 1 (closed) / 4 (open) Focused beam diameter: approx. 0.6 mm Heated F-theta lens, focal length: 500 mm High-speed galvanometer scanner with temperature compensation Exposure area: 350 × 350 mm Beam deflection speed: max. 6 m/s Mechanics & Build Volume: Build chamber: 350 × 350 × 620 mm X-axis (coater): Travel 690 mm, speed max. 200 mm/s Z-axis (build platform): Travel 650 mm, speed max. 6 mm/s, resolution 0.01 mm Powder dosing via grooved roller Heating Systems: Process chamber heating: 3.0 kW, infrared twin tube radiator with pyrometer control Take-off chamber heating: 1.6 kW, resistance heater coil with separate temperature measurement Control & Operation: Process computer with Windows 7 OS 15.1" TFT display, membrane keypad & mouse Ethernet network connection Other: Noise emission: < 70 dB(A) Lrjdpsxw Uyqjfx Al Ton Electrical Data: Voltage: 400 V 3~/N/PE Frequency: 50 / 60 Hz Rated power: 10 kW Rated short-circuit current: 5 kA Current draw (full load): 16.0 A Line protection: 32 A Total weight: approx. 1,400 kg Condition: used Scope of delivery: (see picture) Base machine with control cabinet & control terminal Exchangeable frame with build platform Blade cassette II (blue) Software: Windows 7 Process software (PSW) EOSTATE Basic Parameter set PA 2200 Balance Cooling system (termotek) Multibox (Specifications and information are subject to change and correction!) For further questions, please feel free to contact us by phone.

Condition: good (used), EOS Type: P390 Eosint P 390 – Laser Sintering System (SLS) Operating hours: 6,735 h For sale is an industrial laser sintering system from EOS, model P 390. It is suitable for additive manufacturing (SLS – Selective Laser Sintering) of plastic components on an industrial scale. Base machine with control cabinet & operating terminal Exchange frame with build platform Multibox is a typical accessory for powder handling in EOS systems, enabling transport and interim storage of materials. Technical data: Build volume: approx. 340 × 340 × 620 mm (X × Y × Z) Minimum layer thickness: 0.1 mm (variance < 0.05 mm) Powder container capacity: 2 × 45 liters with fluidization and dispenser Heating: Infrared, 3.2 kW Nitrogen generator: integrated, purity > 99% Electrical supply: 400 V ±6/–10 %, 50 Hz, 3 × 32 A, power consumption approx. 2 kW Extraction: 20 m³/h at 6 bar, DN 100 Cooling: 5.7 l/min at 18–20 °C (± 0.1 °C) Dimensions & weight: Machine (W × D × H): approx. 1,230 × 1,175 × 2,100 mm Control cabinet: 610 × 790 × 2,100 mm Operating terminal: 950 × 700 × 1,550 mm SMC HRS024-AN-20-T Thermo-Chiller – Air-cooled – High-pressure pump Technical data: Model: HRS024-AN-20-T Cooling capacity: approx. 2.1–2.4 kW Lrsdpfxexbgnbs Al Ton Temperature range: 5 °C to 40 °C Temperature stability: ± 0.1 °C Cooling type: air-cooled Pump: high-pressure pump ("T" version) Flow rate: up to approx. 14 l/min Tank volume: approx. 5 liters Medium: water or water-glycol Connection: NPT version ("AN") Power supply: 200–230 V AC, single-phase Refrigerant: R407C Weight: approx. 1,110 kg Condition: used Scope of delivery: (See image) (Specifications and technical data subject to change and error!) If you have further questions, we would be pleased to answer them by phone.

Condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: 523afbb3, Year of construction: 2019, workpiece weight (max.): 10 kg, workpiece length (max.): 250 mm, workpiece width (max.): 183 mm, workpiece height (max.): 150 mm, No reserve price – guaranteed sale to the highest bidder! Bidding obligates the buyer to collect the item on time by 20/12/2025! This lot offers a complete solution comprising a printer, washing unit, and sintering unit for auction! The machine is a demonstration model and has seen minimal use! TECHNICAL DETAILS Printing Process: Atomic Diffusion Additive Manufacturing (ADAM) Build Volume: 300 x 220 x 180 mm Layer Thickness: 50 µm – 200 µm Max. Part Size: 250 x 183 x 150 mm Max. Part Weight: 10 kg Sintering Capacity: 3,020 cm³ Lodpfx Alsxnp Has Tern Sintered Area: 348 cm² Sintering Time: 26 hours Max. Temperature: 1,300 °C Washing Capacity: 18,356 cm³ Washing Volume: 356 x 254 x 203 mm Basket: Stainless steel washing basket Fluid: Opteon SF79, Opteon SF80, Tergo Metal Cleaning Fluid MACHINE DETAILS Printer Dimensions Dimensions: 575 x 467 x 1,120 mm Weight: 75 kg Washing Unit Dimensions Dimensions: 609 x 685 x 1,067 mm Weight: 136 kg Sintering Unit Dimensions Dimensions: 1,270 x 510 x 720 mm Weight: 136 kg Input Voltage: 240 V Input Current: 6 A Input Frequency: 60 Hz EQUIPMENT Dual-nozzle printing system Heated print chamber Vacuum-sealed print bed (new vacuum pump and vacuum silencer installed in 2022) Automatic leveling

Condition: new, Year of construction: 2025, functionality: fully functional, number of drawers: 12, warranty duration: 12 months, total height: 2,280 mm, total width: 2,740 mm, total length: 7,399 mm, fork length: 140 mm, We offer a warehouse for the storage of quartz sinters in a size of 330 cm x 170 cm . Our company designs and manufactures warehouses for various types of slab materials. Technical parameters of the S140-12 sintered particleboard storage rack : Number of drawers - 12 Lrodovf Im Rspfx Al Ton Size of sheet - max 1800 X 3450 Load capacity of a single drawer - 1500 kg Width of loading space - 140 mm Total storage width - 2740 mm Orientation (tilt side of drawers) - universal (depends on assembly) Number of positioning rollers per drawer - 8, bearing-mounted Construction - modular (combinable) Material of the front wheel of the drawer - polyamide not destroying the floor We export our products to over 30 countries worldwide. Please visit

Year of construction: 2023, condition: new, El. heated two-track plate pusher furnace, make Riedhammer type: TP12,75/2x20/15-E-145 condition: as new total length of oven: 15.5 m furnace width: 3.6 m voltage type: 400/230V, 50 Hz connected load: 17 kVA tolerated voltage fluctuation: 10% Ljdpfx Alsp T T Hne Tjrn tolerated frequency fluctuation: 1% PLC: SIEMENS/Comfort Panel TP1500-15 product structure (L x W x H) including push plate: 200 x 200x 101 mm Tmax debinding zone (4 segments): 650 °C Tmax pressure compensation zone (1 segment): 750 °C Tmax main combustion zone (6 segments): 1450 °C Tmax cooling module 1: 600 °C Tmax cooling module 2: 300 °C min. push time: 8 min max push time: 30 min number of conveyor plates: 266 pieces channel height: 105 mm

Year of construction: 2023, operating hours: 10,700 h, condition: like new (used), functionality: fully functional, Build Cylinder Size: 2x 400x400x520 mm Scanning Speed: 15,2 m/s Scanner: High-precision three-axis digital galvo system Laser: CO2 Laser, 1×100W Max. Chamber Temperature: 190°C Gewicht: ca. 3.000 kg incl. 260kg FS3300 Powder incl. Chiller Lodjn Dxbyspfx Al Tjrn incl. N2 Generator incl. Breackout Station

Year of construction: 2019, condition: used, Technical details: control: Sinterit Studio 2019 Open voltage: 220/50 V / Hz total power requirement: 1,0 (max. 1,8) kW weight of the machine approx.: 90 kg dimensions: 690 x 510 x 900 mm 3D printer SLS Laser System IR Laser Diode 5 (W) Max. Print distance diagonal: 316mm Flexa/TPE - high accuracy max. print volume 110 x150 x 250mm PA - high accuracy max. print volume 90 x130 x 230mm X/Y accuracy: 0.05mm table size/working space: 150 x 200 x 260mm built-in nitrogen chamber nitrogen consumption: 0,48 m³/h heating system with max. chamber temperature: 200°C Accessories: Lrodpfeu N Auusx Al Tsn Glass plate (Laser Protective Glass) 1x USB (software accessible), Software Sinterit Studio 2019 open, supported formats STL,OBJ,3DS,FBX,DAE,3MF, operating system MS Windows Light source (Set of Infrared heaters 24V) various bottles with polyamide powder div. small parts *

Condition: new, Year of construction: 2025, functionality: fully functional, The granular mixer is available in 6 versions: The version can be made of stainless steel or coated steel: Technical specifications: MV 2 The MV 2 is designed for the complete mixing of the entire plastic granulate, due to the forced guidance provided by the screw sleeve. Lrodpfx Aod R Atrjl Ton Container capacity: 120 kg / 200 L L x W x H: 700 mm x 700 mm x Height: 1050 mm / 1250 mm - Screw, removable - Control for mixing times - Extraction device - 1 drain - Mobile base frame, running rollers 100 mm, all with parking brake.

Condition: used, Year of construction: 2021, Sinterit Multi PHS + Sandblaster – Accessories as Shown in the Photos, No Vacuum Cleaner, 2021 The Sinterit Multi PHS (Powder Handling Station) with Sandblaster is a professional post-processing solution designed for SLS 3D printing applications. It supports an efficient workflow for powder removal, material handling, and part cleaning, helping improve cleanliness and convenience during post-processing. This offer includes the Sinterit Multi PHS, Sandblaster, and accessories as shown in the photos. Please note that the vacuum cleaner is not included. Production year: 2021. Key features: Professional powder handling and post-processing station for SLS printing Supports powder cleaning, sieving, and part finishing processes Includes Sandblaster for surface cleaning and finishing Accessories included as shown in the photos Industrial-grade design suitable for professional use Included in the offer: Lrodpfx Aleywurvs Tjn Sinterit Multi PHS Sandblaster Accessories as shown in the photos Vacuum cleaner not included

Condition: ready for operation (used), Conveyor Belt, Transport Belt, Running Belt 6m, Used Machine Ljdpfev Dgndjx Al Tjrn Manufacturer: Mass International Model: NP / 04270 Overall Dimensions: 6000 x 420 x 930 mm Belt Size: 5675 x 200 mm Belt Speed: 3.7 m/min The belt has 3 fans, and the track can be ventilated/cooled. Electrical Specifications: 400V

Condition: ready for operation (used), Conveyor Belt, Conveyor System, 6m, Used Machine Manufacturer: Mass International Model: NP / 042/2 Overall Dimensions: 6000 x 480 x 1000 mm Belt Size: 5675 x 200 mm Belt Speed: 3.7 m/min Ljdpfx Ajvvlkhel Tjrn The conveyor is equipped with 3 fans, making the system ventilated/coolable. Electrical Specifications: 400 V

Condition: new, SLS Materials for Industrial & Compact SLS 3D Printers High-performance SLS powders for professional additive manufacturing – compatible with a wide range of industrial and compact SLS 3D printers, including EOS, Formlabs, Sinterit, Sintratec, Nexa3D, and Raise3D systems. Our SLS powders undergo extensive in-house testing to ensure reliable processing, excellent mechanical properties, and consistent print quality across multiple machine platforms. Designed for both industrial production and compact SLS systems, IM3D materials deliver professional performance without restricting you to a specific ecosystem. Available Materials PA12 Balance – €45/kg Cost-effective, all-purpose PA12 powder with excellent refresh behavior and reliable mechanical properties. PA12 Performance – €49/kg Enhanced PA12 material with improved elongation at break and increased impact resistance for demanding functional applications. PA12 Glass Filled (PA12-GF) – €44/kg Stiff, dimensionally stable PA12 material reinforced for tooling and engineering parts. TPU88A – €45/kg Flexible SLS material with excellent elasticity, durability, and impact resistance. Machine Compatibility Compatible with a broad range of SLS systems, including: EOS / EOSINT: P100, P110, P350, P360, P380, P385, P390, P395, P396, P450, P500, P700, P730, P760, P770 Formlabs: Fuse 1, Fuse 1+ Sinterit: Lisa, Lisa Pro, Lisa X, Suzy Sintratec: Kit, S1, S2, S3 Nexa3D: QLS230, QLS236, QLS260 XYZ Systems: MfgPro230 xS, MfgPro236 xS Raise3D: RMS220 SLS4All Innova MK1 Loopzizo K-100 More compatibility information: im3d.shop/printer-compatibility OEM Material Alternatives We offer alternatives and/or drop-in replacements for materials from Formlabs, Sinterit, Sintratec, and Raise3D, including: Formlabs PA11, PA12, PA12 Tough, PA12-GF, TPU90A Ljdpfx Asy Til Aol Tjrn Sinterit Flexa Performance, PA11 Onyx, PA11.5, PA12 Eco, PA12 Industrial, PA12 Smooth Sintratec PA12, PA12-GF, TPU88A Raise3D PA Next, PA Next GB, PA11, PA12, PA12 GB, TPU86A, TPU90A OEM comparison overview: im3d.shop/compare/oem Why Choose IM3D SLS Materials? Broad compatibility across industrial and compact SLS systems Excellent refresh rates and low cost per part Stable processing and consistent print quality Industrial-grade performance without vendor lock-in In-house tested and production validated Technical onboarding and support available Fast shipping from the Netherlands

Condition: new, Year of construction: 2026, functionality: fully functional, L: 2000 mm NB: 450 mm Lodpfx Ajhmufkel Torn GB: 505 mm Belt speed: 3 m/min, adjustable Height adjustable: 800-1400 mm

Condition: new, Year of construction: 2026, Angled conveyor belt available in various lengths and widths, as well as different speeds. - Can be moved on steerable stop rollers. - Angle is adjustable. - Cleat height: 30 mm. Lrodpfxelkdbys Al Ten - Spring-assisted height adjustment.

Condition: new, Year of construction: 2026, functionality: fully functional, The NPS belt conveyor is for sale. It can be ordered in various lengths and usable widths. - High-quality aluminum profile, anodized, with grooves - Without guide plates - Smooth PU conveyor belt, temperature-resistant from -10°C to +90°C - Mobile substructure, adjustable from 900 - 1300 mm - Worm gear motor, 3 x 400 V, 50 Hz - Constant belt speed of approximately 6.0 m/min - Motor protection switch with 5 m cable & CEE plug Ledpfx Aslkda Hel Torn

Condition: new, Year of construction: 2026, functionality: fully functional, Z-type belt conveyor, type NDZ, available in various lengths and widths - High-quality aluminum profile, anodized, with grooves Lrjdpfeg Arxvjx Al Tsn - Rubber-coated drive roller - Aluminum side guide, 50 mm high - PU conveyor belt with cleats, 30 mm high - Mobile substructure with adjustable angle - Motor protection switch with 5 m cable & CEE plug Available upon request: - Custom size - Timed control - Frequency inverter (€485) - Wavy edge (€492)