Used Sinter for sale (128)

Condition: excellent (used), Desktop Metal 3D Printer Complete System Here we offer you Desktop Metal 3D printer complete system. Desktop Metal 3D printer studio system Complete system: 3D printer + debinding machine + sintering furnace Desktop Metal The three-part solution includes 3D printer, debinder and furnace Manufacturer Desktop Metal Model Desktop Metal Studio System Operating condition Used (Good) Year of manufacture 2019 Desktop Metal Studio System Includes: 1.1 Desktop Metal Studio 3D Printer Bound Metal Deposition (BMD) Technology. Features: Printed materials metal Technology FDM Use Industry Other features Office X-stroke 30 cm (12 in) Y-stroke 20 cm (8 in) Z-stroke 20 cm (8 in) Description: Unlike laser-based systems that selectively melt metal powders, the printer extrudes bonded metal rods - similar to an FDM printer. This eliminates the safety requirements often associated with metal 3D printing, and it enables new features such as the use of closed-cell fills for lightweight strengths. 1.2 Desktop Metal Studio debinder (delamination machine) fully automatic debinding Cleaning tank: 17.4 L (in process) / 22.5 L (stock) Description: The debinder prepares green parts for sintering by dissolving the primary binder. With a low emission design, it requires no external ventilation and is safe for an office environment. Automatic liquid distillation and recycling means no need to refill between cycles. 1.3 Desktop Metal Studio Sintering Furnace hybrid technology (microwaves & conventional heating elements) Installation space 305x205x205mm Carbon housing Gas supply: 2 x 900 L gas cylinders Itsdpjk Hz Nqjfx Acuon Heating power: 20 kW Features: Function Sinter Configuration Chamber Heat source gas Other features High temperature, automatic Maximum temperature 1,400 °C (2,552 °F) Description: Fully automated and sized to fit through an office door, the furnace delivers industrial-grade sintering in an office-friendly package. Built-in temperature profiles matched to each design and material provide uniform heating and cooling without the residual stresses associated with laser-based systems. Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: like new (used), Year of construction: 2003, Retrofitted: 2024 Numerical control: SIEMENS 840 D Technical features Dimensions Table dimensions: 14.000 x 2.500 mmNumber of T slots: 10T slots dimensions: 22 mm Traverses of axis X axis traverse: 14.000 mmY axis traverse: 3.100 mmDistance between columns: 4.417 mmZ axis traverse: 1.200 mm (220 - 1.420 mm) Milling head Head type: 5 Axis “C5C” Electrospindle 18.000 rpmTool clamping system: HydraulicTaper nose: HSK 63Speed range: 18.000 rpmSpindle power: 25 kW Feedrates Feedrate: 30.000 mm/minRapid feedrate (X/Y,Z): 30.000 mm/min Weight and dimensions Maximum weight on table: 15.000 Kg/m2Machine weight: 135.000 KgMachine dimensions: 15.000 x 8.418 x 6.033 mm Accesories Guarding: YesInternal external coolantAutomatic tool changer: 24 toolsElectronic handwheel: Yes Sales conditions Warranty: 6 months mechanical partsSale price (Ex Work): On request View all technical features Itodpfougbppsx Acusn

Condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: 525389e4-9874-4408-810c-82126df2811f, Year of construction: 2020, operating hours: 7,508 h, overall weight: 75 kg, travel distance X-axis: 300 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 180 mm, Equipment: CE marking, Hardly used showroom complete system consisting of the following components: Markforged Metal X 3D printer Markforged Wash 1 debinding station Markforged Sinter 2 industrial sintering furnace & additional accessories Markforged Metal X TECHNICAL DETAILS Build volume: 300 x 220 x 180 mm Printing process: Atomic Diffusion Additive Manufacturing (ADAM) Print chamber: Heated Build plate: Heated, vacuum-sealed, with automatic leveling Printing system: Dual extruders – metal material and release material Print materials: Stainless steel 17-4 PH, 316L, tool steel H13, A2, D2, Inconel 625, copper, titanium-6Al-4V Media supply: Filament feed, bound powder material Part Features Maximum part size: 250 x 183 x 150 mm Layer thickness: 50 microns and 125 microns MACHINE DETAILS Dimensions & weight Dimensions: 575 x 467 x 1,120 mm Weight: 75 kg Software: Eiger Cloud Printer power supply: 100–240 V / 50–60 Hz / 12.6 A Certifications: CE, FCC, UL, RCM, UKCA Safety features: Two-factor authentication, organizational admin access, single sign-on EQUIPMENT Argon gas control with pressure reducers and quick couplings Iedpfx Asw I Dqbjcuetn Original Markforged transport case with spare build plates Mobile castors Isolation transformer

Condition: new, Year of construction: 2025, functionality: fully functional, number of drawers: 30, SLIDING RACK FOR GLASS M80-30 MANUFACTURED IN 2025/ BRAND NEW We manufacture sliding racks for glass pane storage (boxes with glass) or other panel materials (metal sheets, quartz sinters, polycarbonates, furniture boards). We design and manufacture our racks from scratch in Poland. The materials which we use for manufacturing hold the proper certificates of durability and they are subject to quality control on a continuous basis. Storage racks consist of sliding and slightly inclined drawers. They save up to 75% of space because all the partitions are parallel and they are separated every 10 millimetres. We also offer various sizes and load-bearing capacities. However, after consultations, we are able to manufacture a storage rack of different parameters, considering your individual conditions and requirements. The inclination of spans depends on assembly – it may be right hand sided or left hand sided. We recommend this storage rack especially to glass production facilities, stoneworks facilities, furniture production facilities and advertising companies, which want to use their space effectively. The racks are delivered for self-assembly in a package. The assembly is very simple and easy owing to our long-term experience which allowed us to create a well-thought product which is attached with the assembly instructions, making the assembly trouble-free. In case of any problems, do not hesitate to contact our technical department. We also provide charged assembly services by our technicians in your location. M80-30 RACK TECHNICAL DATA Itsdpfx Aeha E S Tscuon Intended use – single glass panes 255 cm x 160 cm Maximum pane size - 275 cm x 170 cm Number of partitions -30 The width of the storage strip for glass – 8 cm The length of the storage strip for glass - 308 cm The material on which glass is placed – wooden board 308 cm x 8 cm x 2.5 cm Structure height (A) – 218 cm Structure width (B)- 436 cm Structure depth (C)-318 cm Space needed for the correct use of the rack – 27 m2 Requirements for the ground – smooth/straight The number of the partition guide bearings – 8 pcs. Front wheel – Ø 160 / reinforced polyamide Rear wheel – steel wheel with a bearing / rolled along the profile Colour - RAL 7040 (grey) Anti-corrosion protection – phosphating and powder-coating of steel elements Permissible load-bearing capacity of a single partition – 900 kg Permissible load-bearing capacity of the whole rack – 27000 kg Partitions inclination – left or right – depending on assembly Assembly time - 14 hours The number of people required for assembly – 2 people DOCUMENTS ATTACHED TO M80-30 RACK - User’s Manual - Assembly Instructions - Rating plate - 12 months’ warranty The product is delivered as a whole ready for use. We also deliver our racks for glass to the EU countries and other countries.

Condition: used, mileage: 251,500 km, power: 120 kW (163.15 HP), fuel type: diesel, gearing type: automatic, overall weight: 3,500 kg, first registration: 06/2015, next inspection (TÜV): 03/2023, loading space length: 4,320 mm, loading space width: 2,130 mm, loading space height: 2,070 mm, emission class: euro6, color: brown, number of seats: 3, Year of construction: 2014, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Sonderausstattung: Anfahrhilfe (Berganfahr-Assistent), Audiosystem Audio 10 (Radio mit CD-Player), Auspuff vor Hinterachse links, Außentemperaturanzeige, Batterie zusätzlich (verstärkt), Dachbedieneinheit mit Lesespot Fahrer-/Beifahrerseite, Generator 180 A, Kraftstoff-Filter mit Wasserabscheider, Lenkrad (Lenksäule mech. verstellbar), Parametrierbares Sondermodul, Reserverad in Fahrbereifung, Reserveradhalter unter Rahmenende inkl. Wagenheber, Rückspiegel innen, Rückwand mit Fenster, Schmutzfänger vorn, Sitze im Fahrerhaus: Beifahrerdoppelsitz, Sitze im Fahrerhaus: Fahrersitz heizbar, Sitze im Fahrerhaus: Fahrersitz Komfort, Stabilisator hinten verstärkt, Stabilisator vorn verstärkt, Tankgeber für Zusatzheizung, Trennrelais bei Batterie zusätzlich, Verkleidung Rückwand, Vlies-Batterie 95 Ah, Wärmeschutzverglasung (Frontscheibe mit Bandfilter oben), Zusatzheizung (Warmwasser) Weitere Ausstattung: Adaptives Bremslicht, Airbag Fahrerseite, Anzeige für Waschwasserstand, Außenspiegel elektr. verstell- und heizbar, beide, Außenspiegel mit integrierter Blinkleuchte, Batterie 74 Ah, Bremsassistent, Bremssystem mit ABS+ASR, Dachverkleidung im Fahrerhaus, Handschuhfach abschließbar, Karosserie/Aufbau: Pritsche, Kraftstofftank: Haupttank 75 Ltr., Leuchtweitenregelung, LKW-Zulassung, Modellpflege, Motor 2,1 Ltr. - 120 kW CDI KAT, Radstand 4325 mm, Raucher-Paket, Schadstoffarm nach Abgasnorm Euro 6, Sicherheitsgurt-System mit Warnanlage (Fahrerseite), Sitzbezug / Polsterung: Stoff Lima, Sitze im Fahrerhaus: Beifahrersitz verstellbar, Stahlfelgen 6,5x16, Wartungsintervall-Anzeige Assyst, Zul. Gesamtgewicht 3,50 t. Please call us at WhatsUp/Viber also) E-mail: Iedpfswl S N Iox Acustn

Condition: used, Year of construction: 2018, functionality: fully functional, HPFS series are suitable for processing metal materials, such as stamping, bending, compressing and drawing metal sheet etc. It can also be used for straightening, pressing, plastic molding, balsa wood punching and sintered parts compacting. Nominal force 1000KN Max. working pressure of liquid 25Mpa Slider stroke 400mm Iedpfequqc Isx Acuotn Max. opening height 700mm Worktable size 1700 x 800mm Idle speed of slider 100mm/s Working speed od slider10-25mm/s Return speed of slider 30-80mm/s Height above floor 800mm Specification Unit Parameter Model No. HPHS-100T Nominal Pressure KN 1000 Return force KN 320 Slide Stroke mm 400 Max. Opening Height mm 700 Slider Speed: -Downstream speed mm/s 100 -Pressing mm/s 10-25 -Return mm/s 30-80 Table Size: -L.R. mm 1700 -F.B. mm 800 Overall dimensions: -L.R. mm 2300 -F.B. mm 800 -Height above floor mm 3000 Servo motor Power KW 18.5 Voltage 400V, 50Hz, 3 Phase Total Weight app. T 12 Below attached drawing with tech. specification

Condition: excellent (used), Eos Metal Laser Sintering System Here we offer an Eos Metal Laser Sintering System. Material processed with the system: Gold Laser type: Yb-fibre laser, 100 W Scan speed: up to 7.0 m/s Construction volume: Ø80mm x 100mm Dimensions (W x D x H) system: 800 mm x 950 mm x 1,850 mm Installation area: 1000mm x 3000mm x 2500mm Weight approx. 580 kg Software: EOS RP Tools, Offline PSW CAD interface: STL Network: Ethernet Type: EOS M080 External gas connection (nitrogen) Itodpjqzgvaefx Acuon Power consumption maximum 2.3 kW 13A Scope of delivery: See pictures Condition: used (Changes and errors in the technical data, information are reserved!) We will be happy to answer any further questions you may have over the phone.

Condition: new, conveyor belt length: 22,000 mm, conveyor belt width: 3,750 mm, overall weight: 800 kg, The flat spiral belt with S-hook is a woven belts consisting of left and right spirals which are twined together by means of straight cross rods. The spirals are attached under post-tension, whereby a very dense belt surface is created. The cross rods at the end are bended in the direction of the previous cross rod. The cross rod is then bended around the previous cross rod. Weight 800kg Width 3.75m Diameter of chains 1.2mm Iedpfx Ajtp S E Ejcustn The flat spiral belts with S-sides are practically familiar with a restricted amount of applications. This however doesn’t mean that the belt type can’t be used for other applications: – Oven belts in bread & pastry in industry – A special version of the above mentioned is with duplex chains at the sides – Belts in tunnels serving high temperature treatment processes such as tempering, harden, sintering, hard soldering, etc.

Condition: good (used), Nabertherm High-Temperature Furnace 1600 °C The HT 04/16 - HT 450/18 high-temperature furnaces have proven themselves in the laboratory and in production for many years. Whether for quartz glass, glass-ceramics, the sintering of CIM components, or other processes up to a maximum temperature of 1800 °C, these furnaces represent the optimal solution for the sintering process. Thanks to their solid construction and compact, floor-standing design, these high-temperature furnaces are ideal for laboratory processes that require the highest precision. Excellent temperature uniformity and sophisticated details set unsurpassed quality standards. Itodpewxwa Esfx Acujn Tmax 1600°C Double-walled housing construction with fan cooling, resulting in low outer wall temperatures Heating from both sides via molybdenum disilicide heating elements High-quality fiber insulation with special backing insulation Side insulation, constructed from tongue-and-groove blocks, ensures low heat loss to the outside Durable ceiling insulation with special suspension Parallel swing door with chain guide for defined opening and closing of the door Labyrinth seal ensures minimal temperature loss in the door area Exhaust air vent in the furnace ceiling Heating element control via thyristors NTLog Basic for Nabertherm controller: Recording process data via USB stick Maximum temperature: 1600°C Internal dimensions (mm): 200x200x200 External dimensions (mm): 830x370x590 Volume (L): 4 Connected load (kW): 5.2 Electrical connection: 3-phase Weight (kg): 150 Find more items – new and used – in our shop! International shipping costs on request!

Condition: like new (used), For Sale: Complete EOS P110 Setup – Ready for Immediate Use This fully inspected and revised EOS P110 is in outstanding condition, as seen in the photos—it looks practically new! This setup is ready for immediate use and ideal for expanding or starting your SLS production line. Included in the package: • 2 Build frames • Set of hoppers • Unpacking station with sieve • Material mixer Specifications: • Technology: SLS (Selective Laser Sintering) • Material class: Polymers • Compatible materials: PA2200, PA3200, PA2201, Inframotion PA12, TPU, and more. • Construction volume: 200 x 250 x 330 mm • Laser type: Coherent CO2 laser • Minimum wall thickness: 0.4 mm Consumables Highlight We offer plug-and-play materials, fully tested and optimized for use with EOS machines. Our exclusive Inframotion PA12 material is designed to match or exceed the performance of OEM powders while offering significant cost savings. By switching to our materials, you can lower your production costs without sacrificing quality. Iodpfxsryvils Acuotn Services Included: • Transport & Installation: We ensure safe delivery in original EOS packaging and professional installation. • Warranty & Maintenance Plans: Flexible options tailored to your needs, ensuring long-term reliability and peace of mind. About Inframotion 3D (IM3D) At Inframotion 3D B.V., we are the industry leader in providing top-tier refurbished EOS SLS machines with comprehensive support services. As the only provider offering end-to-end solutions for used EOS equipment, we pride ourselves on unmatched expertise and reliability. What we offer: • Expert service: Installation, maintenance, repairs, and upgrades performed by experienced ex-EOS technicians. • Exclusive materials: Cost-saving, high-quality consumables like our plug-and-play PA12, designed specifically for EOS systems. • Unparalleled support: From transport to maintenance plans, we handle it all. Trust IM3D for high-performance machines, superior materials, and the expertise to keep your SLS production running smoothly. For more information or inquiries, feel free to reach out!

Condition: good (used), Year of construction: 2017, CNC Speedform Rapidcleaner for automated depowdering of 3D-printed parts produced with powder bed fusion technologies (SLS, MJF, SAF). Iedpfx Ajvuztcscujtn Features (manufacturers spec): Up to several thousand parts per operation, depending on size and geometry Extremely short processing time: 1-10 minutes Fully automated blasting with micro glass beads Absolutely dust-free part quality Perfect cleaning, even with the smallest bore diameters Lowest and optimized blasting material requirement Robust and very low-maintenance system design Suitable for all plastic materials Simple and safe operation Clean separating device Machine operates with 2 blasting nozzles and two nozzles with ionized air. The blasting media is sieved to allow fine control over the media used in the process. Furthermore this machine has an HMI retrofitted which allows to program different recipes with multiple process steps. 2 machines available towards the end of Feb. '25 Keywords: AMT, Dyemansion, AM Solutions, Rosler, Additive Manufacturing Technologies, EOS, HP, Farsoon, 3d printing, selective laser sintering, mjf, multi jet fusion, 3d print, additive manufacturing, eosint, blasting, depowdering, shotpeening

Condition: new, Year of construction: 2025, functionality: fully functional, number of drawers: 26, warranty duration: 12 months, SLIDING RACK FOR GLASS M80-26 MANUFACTURED IN 2025/ BRAND NEW We manufacture sliding racks for glass pane storage (boxes with glass) or other panel materials (metal sheets, quartz sinters, polycarbonates, furniture boards). We design and manufacture our racks from scratch in Poland. The materials which we use for manufacturing hold the proper certificates of durability and they are subject to quality control on a continuous basis. Storage racks consist of sliding and slightly inclined drawers. They save up to 75% of space because all the partitions are parallel and they are separated every 10 millimetres. We also offer various sizes and load-bearing capacities. However, after consultations, we are able to manufacture a storage rack of different parameters, considering your individual conditions and requirements. The inclination of spans depends on assembly – it may be right hand sided or left hand sided. We recommend this storage rack especially to glass production facilities, stoneworks facilities, furniture production facilities and advertising companies, which want to use their space effectively. The racks are delivered for self-assembly in a package. The assembly is very simple and easy owing to our long-term experience which allowed us to create a well-thought product which is attached with the assembly instructions, making the assembly trouble-free. In case of any problems, do not hesitate to contact our technical department. We also provide charged assembly services by our technicians in your location. M80-26 RACK TECHNICAL DATA Intended use – single glass panes 255 cm x 160 cm Maximum pane size - 275 cm x 170 cm Number of partitions -26 The width of the storage strip for glass – 8 cm The length of the storage strip for glass - 308 cm The material on which glass is placed – wooden board 308 cm x 8 cm x 2.5 cm Structure height (A) – 218 cm Structure width (B)- 384 cm Structure depth (C)-318 cm Space needed for the correct use of the rack – 22 m2 Requirements for the ground – smooth/straight The number of the partition guide bearings – 8 pcs. Front wheel – Ø 160 / reinforced polyamide Rear wheel – steel wheel with a bearing / rolled along the profile Colour - RAL 7040 (grey) Anti-corrosion protection – phosphating and powder-coating of steel elements Permissible load-bearing capacity of a single partition – 900 kg Permissible load-bearing capacity of the whole rack – 23 400 kg Partitions inclination – left or right – depending on assembly Assembly time - 8 hours Itjdof S Hh Tjpfx Acuen The number of people required for assembly – 2 people DOCUMENTS ATTACHED TO M80-26 RACK - User’s Manual - Assembly Instructions - Rating plate - 12 months’ warranty The product is delivered as a whole ready for use. We also deliver our racks for glass to the EU countries and other countries.

Year of construction: 1995, condition: used, Dust extractor,welding fume extractor by Herding. Self-cleaning,pneumatic filter for plasma,laser,sandblasting,sodding,grinding plaster,cement,plastic and all kinds of dry dust. The filter is cleaned pneumatically by impulses of compressed air during operation, thus high efficiency of the device. High-quality filter cartridges of HSL type are made of sintered polyethylene with the possibility of cleaning have several times longer service life compared to ordinary cartridges. Itodpfx Aopwhl Uecusn As standard, the coating is made of PTFE, which in combination with the material of the body (PE) provides a very high chemical durability. 4 Kw fan Capacity - 1680 m3/h

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 181199, Machine no.: 181199 Manufacturer: AGTOS Type: Barrel blasting machine Designation: TS 150-3.6-01-15,0 Turbines: 1 turbine with 15.0 kW Extraction air volume: 3000 m³/h Itsderq Hmzjpfx Acuen Max. batch weight: approx. 1000 kg Type: Sinter-plate filter Other details Characteristics of the installed filter system Residual dust content: ≤ 1 mg/Nm³ Characteristics of the blasting system Blasting media (material and size): Wire grain Blasting media quantity (initial filling): approx. 1000 kg Workpiece temperature: max. 80°C Drum length: 900 mm Drum diameter: 800 mm Max. Drum load: 250 kg Max. Single piece weight: 5 kg Capacity: 150 liters Max. Feeder lifting capacity: 480 kg Sound pressure level without sound insulation: ≤ 85 dB(A)

Condition: good (used), functionality: fully functional, Technology: Selective Laser Sintering Build Volume: 230 x 230 x 250 mm (9.0 x 9.0 x 9.8 inch) Laser Performance: 60W Fiberlaser (CO2) Layer Thickness: 0.06 / 0.08 / 0.1 / 0.15 / 0.2 / 0.3 mm Max. Build Speed: Up to 22 mm / hour (Geometry dependent) Itsdpfewcyzajx Acuon Accuracy: 0.2mm Full Parameter Access: Yes Printer Dimensions: 148 x 85 x 204 cm (58.3 x 33.5 x 80.3 in)

Condition: refurbished (used), For Sale: Refurbished EOS M100 – Ready to Use This fully inspected and refurbished EOS M100 is in excellent condition! This setup is ready to use and ideal for expanding or starting a DMLS production line. Specifications: • Technology: DMLS (Direct Metal Laser Sintering) • Material Type: Metal • Compatible Materials: On Request • Build Volume: 100 x 100 x 95 mm • Laser Type: Yb-fiber laser; 1 x 200 W Consumables Featured We offer plug-and-play materials, fully tested and optimized for use with EOS machines. Our exclusive Inframotion PA12 is designed to perform at or above OEM powder levels, while significantly reducing costs. By switching to our materials, you will reduce your production costs without compromising on quality. Included Services: • Transport & Installation: We ensure safe delivery in original EOS packaging and professional installation. • Warranty & Maintenance Plans: Flexible options to fit your needs, for long-term reliability and peace of mind. About Inframotion 3D (IM3D) At Inframotion 3D B.V., we are the market leader in high-quality remanufactured EOS SLS and DMLS machines with comprehensive support services. We are the only provider to offer end-to-end solutions for used EOS equipment, with unmatched expertise and reliability. What we offer: • Expert maintenance: Installation, maintenance, repairs and upgrades performed by experienced ex-EOS technicians. Iodpfswt Dhrex Acustn • Exclusive materials: Cost-effective, high-quality consumables such as our plug-and-play PA12, specifically designed for EOS systems. • Unmatched support: From transportation to maintenance plans, we have it all covered. Trust IM3D for top performance, superior materials and the expertise to keep your SLS and DMLS production running smoothly. Please feel free to contact us for more information or questions!

Condition: like new (used), Year of construction: 2022, operating hours: 70 h, functionality: fully functional, machine/vehicle number: AL-001-0007, laser power: 200 W, travel distance X-axis: 100 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 100 mm, HIGHLIGHTS - Very fine laser spot for the finest geometries - Powerful laser - High powder yield - Reliable printing process thanks to intelligent AL3D-OS software - Small footprint 600 × 617 mm - Closed gas circuit for reduced gas consumption - Low energy consumption - Unpacking station: Clean separation of the sintered component from unused residual powder + collection of the residual powder for possible reuse TECHNICAL DETAILS Installation space size: d = 100 mm, h = 100 mm Resolution: 50 µm Laser & optics Laser type/wavelength: fiber laser 200 W CW, 1070 nm Focus diameter: 50 µm Scanning speed: max. 5 m/s Process parameters: Open access to all machine and process parameters software Operation: 15.6" touchscreen, keyboard and mouse possible Connectivity: Ethernet; 2 × USB Software: AL3D-OS, offline version for project creation Remote access: TeamViewer External software: Autodesk Netfabb, Materialise Magics, CIM Systems Pyramis Software interface: Open interface for external postprocessors File format: CAD import STL Print preparation: Simple support generation; slicer integrated in software Materials Material: Metal powder, grain size fraction 10-45 µm Alloys: Iron, nickel-based, cobalt-chromium, precious metals, reactive metals (others on request) Component density: > 99 % Layer thickness: 10 - 50 µm MACHINE DETAILS Machine dimensions Weight: approx. 180 kg W × D × H: 600 × 617 × 1,770 mm Unpacking station dimensions Weight: approx. 100 kg W × D × H: 600 × 617 × 1,770 mm Operating hours: 70 h Electrics & connection Electrical connection: 230 V, 50 Hz / 60 Hz, max. 16 A Permissible humidity: max. 70 % Permissible ambient temperature: 15 - 30 °C Ijdpfx Aju S H E Hocuetn Shielding gas/argon connection: 4.5 - 6 bar inlet pressure, Ø 6 mm hose connection Gas consumption in operation: < 5 l/min Gas consumption purge function: 20 l/min Unpacking station Vacuum cleaner connection: NW32 connection EQUIPMENT - 3D printer - Unpacking station - 9 print cartridges.

Condition: new, Year of construction: 2025, functionality: fully functional, number of drawers: 10, warranty duration: 12 months, The subject of sale is a warehouse for the storage of glass, quartz sinters, polycarbonate, furniture boards, stone or other board materials. The magazine has the form of retractable, slightly inclined drawers. With it, you can save up to 75% of space, because all drawers are parallel to each other and only 10 millimeters apart. We offer various dimensional and lifting versions, however, after consultation, we are also able to produce a warehouse with different parameters, taking into account your individual conditions and wishes. Itjdpsd Tamljfx Acujn The magazine is especially recommended to glass, stone, furniture and advertising companies, which care about the effective use of their space. Specification: Glass racking system 10 drawers for 160 cm x 250 cm glass. Load capacity per drawer is 800 kg.

Condition: used, Year of construction: 1993, suction capacity: 1,500 m³/h, negative pressure: 3,600 Pa, Dust extractor,welding fume extractor by Herding. Self-cleaning, pneumatic filter for plasma, laser, sandblasting, sodding, grinding plaster, cement, plastic and all kinds of dry dust. The filter is cleaned pneumatically by pulses of compressed air during operation, thus high efficiency of the device. High-quality filter cartridges of HSL type are made of sintered polyethylene with the possibility of cleaning have several times longer service life compared to ordinary cartridges. Itjdpfxstq Ufvj Acuon As standard, the coating is made of PTFE, which in combination with the body material (PE) provides a very high chemical durability. 4 Kw fan Capacity - 1500 m3/h Filtration area - 38 m2 Control cabinet Inlet diameter - 180 mm Mag. no: 0848/2

Condition: reconditioned (used), For Sale: EOS M400 – High-Performance Metal 3D Printer Isdjvq Sm Eopfx Acuotn This EOS M400, is a cutting-edge metal additive manufacturing system located at the customer’s site. It is equipped with a 1kW laser, ensuring high precision and productivity for large-scale industrial applications. Specifications: • Laser Power: 1kW • Technology: Direct Metal Laser Sintering (DMLS) Compatible Materials: This system supports a wide range of materials, making it ideal for diverse applications across industries such as aerospace, automotive, and medical. Compatible materials include: • Nickel-based alloys: IN718_1, HX-1, IN625_1, IN939_1 • Aluminum alloys: AlF357_1, AlSiMg_1 • Copper alloys: CuCrZr_1, Cu_1 • Stainless steels: GP1_1, PH1_1 • Tool steels: MS1_1, SP2_1 • Titanium alloys: Ti64_1, Ti64ELI_1, Ti64Grade23_1, TiGrade5_1, TiCP_1 • Custom gas options: CustomAr, CustomN2 • Cobalt chrome: MP1_1 Why Choose the EOS M400? • Large build volume for industrial-scale production. • High laser power for enhanced speed and precision. • Wide material compatibility for versatile applications. Services Included: • Transport & Installation Support: We can arrange safe relocation and installation at your facility. • Expert Maintenance Plans: Flexible plans to keep your machine in peak condition. About Inframotion 3D (IM3D) At Inframotion 3D B.V., we specialize in providing high-quality refurbished EOS additive manufacturing machines with comprehensive support. As the only provider offering a complete solution for used EOS equipment, we ensure reliable machines, tailored services, and premium materials for your production needs. What we offer: • Expert service: Installation, servicing, and upgrades performed by skilled ex-EOS technicians. • Exclusive materials: High-quality consumables tested and optimized for EOS systems. • End-to-end support: From transport to tailored maintenance plans, we handle every detail. Trust IM3D to help you scale your metal additive manufacturing capabilities with confidence. Contact us for more information or inquiries!

Condition: new, Year of construction: 2025, functionality: fully functional, number of drawers: 12, warranty duration: 12 months, The subject of sale is a warehouse for storing glass panes (321 cm x 255 cm) in boxes (12 x 2500 kg): glass, quartz sinters, polycarbonate, furniture boards, stone or other board materials. The magazine is in the form of sliding, slightly inclined drawers. Thanks to it, you can save up to 75% of space, because all the drawers are parallel to each other and separated by only 10 millimeters. We offer various dimensions and capacity versions, while after consultation, we are also able to produce a warehouse with various parameters, taking into account your individual conditions and wishes. Itsdof Sqf Ujpfx Acujn The magazine is especially recommended for glass, stone, furniture and advertising companies, which care about the effective use of their space.

Condition: new, Year of construction: 2025, functionality: fully functional, number of drawers: 10, warranty duration: 12 months, The subject of sale is a warehouse for the storage of glass, quartz sinters, polycarbonate, furniture boards, stone or other board materials. Itedpegfm Nmefx Acuon The magazine has the form of retractable, slightly inclined drawers. With it, you can save up to 75% of space, because all drawers are parallel to each other and only 10 millimeters apart. We offer various dimensional and lifting versions, however, after consultation, we are also able to produce a warehouse with different parameters, taking into account your individual conditions and wishes. The magazine is especially recommended to glass, stone, furniture and advertising companies, which care about the effective use of their space. Specification: Glass racking system 10 drawers for 321 cm x 255 cm glass. Load capacity per drawer is 1500 kg.

Condition: new, Year of construction: 2025, functionality: fully functional, number of drawers: 8, The subject of sale is a warehouse for storing glass panes (160 cm x 255 cm) in boxes (8 x 2500 kg): glass, quartz sinters, polycarbonate, furniture boards, stone or other board materials. The magazine is in the form of sliding, slightly inclined drawers. Itjdjgfm I Espfx Acuon Thanks to it, you can save up to 75% of space, because all the drawers are parallel to each other and separated by only 10 millimeters. We offer various dimensions and capacity versions, while after consultation, we are also able to produce a warehouse with various parameters, taking into account your individual conditions and wishes. The magazine is especially recommended for glass, stone, furniture and advertising companies, which care about the effective use of their space.

Condition: new, Year of construction: 2025, functionality: fully functional, number of drawers: 10, warranty duration: 12 months, SLIDING RACK FOR GLASS D220-10 MANUFACTURED IN 2025/ BRAND NEW We manufacture sliding racks for glass pane storage (boxes with glass) or other panel materials (metal sheets, quartz sinters, polycarbonates, furniture boards). We design and manufacture our racks from scratch in Poland. The materials which we use for manufacturing hold the proper certificates of durability and they are subject to quality control on a continuous basis. Our sliding racks have the form of slightly inclined drawers. They save up to 75% of space because all the partitions are parallel and they are separated every 10 millimetres. We also offer various sizes and load-bearing capacities. However, after consultations, we are able to manufacture a storage rack in various parameters, considering your individual conditions and requirements. The inclination of spans depends on assembly – it may be right hand sided or left hand sided. We recommend this storage rack especially to glass production facilities, stoneworks facilities, furniture production facilities and advertising companies, which want to use their space effectively. The assembly is very simple and easy owing to our long-term experience which allowed us to create a well-thought product which is attached with the assembly instructions, making the assembly trouble-free. In case of any problems, do not hesitate to contact our technical department. We also provide charged assembly services by our technicians in your location. D220-10 RACK TECHNICAL DATA Intended use – glass panes 321 cm x 255 cm in wooden boxes Possibility of storing single panes – YES Maximum box size – 345 cm x 275 cm Number of partitions – 10 The width of the storage strip for glass – 22 cm The length of the storage strip for glass – 395 cm The material on which glass is placed – steel supports coated with ash tree strips (5 pieces) Total height (A) – 335 cm Total width (B) – 368 cm Total depth (C) – 407 cm Itsdpfx Aehcipgscuen Space needed for the correct use of the rack – 29 m2 Requirements for the ground – smooth / levelled The number of the partition guide bearings – 8 pcs. Front wheel – Ø 160 full / reinforced polyamide Rear wheel – steel wheel with a bearing / rolled along the profile Colour - RAL 7040 (grey) Anti-corrosion protection – phosphating and powder-coating of steel elements Permissible load-bearing capacity of a single drawer – 2 500 kg Permissible load-bearing capacity of the whole rack – 25 000 kg Partitions inclination – left or right – depending on assembly Assembly time - 7 hours The number of people required for assembly – 4 people Drawers – joined (in order to reduce transport costs) Loading the box with glass onto the drawer – gantry, forklift, HDS DOCUMENTS ATTACHED TO D220-10 RACK - User’s Manual - Assembly Instructions - Rating plate - 12 months’ warranty This product is delivered in parts in order to minimise delivery costs. We also deliver our racks to the EU countries and other countries.

Condition: new, Year of construction: 2025, functionality: fully functional, number of drawers: 16, warranty duration: 12 months, SLIDING RACK FOR GLASS M80-16 MANUFACTURED IN 2025/ BRAND NEW We manufacture sliding racks for glass pane storage (boxes with glass) or other panel materials (metal sheets, quartz sinters, polycarbonates, furniture boards). We design and manufacture our racks from scratch in Poland. The materials which we use for manufacturing hold the proper certificates of durability and they are subject to quality control on a continuous basis. Storage racks consist of sliding and slightly inclined drawers. They save up to 75% of space because all the partitions are parallel and they are separated every 10 millimetres. We also offer various sizes and load-bearing capacities. However, after consultations, we are able to manufacture a storage rack of different parameters, considering your individual conditions and requirements. The inclination of spans depends on assembly – it may be right hand sided or left hand sided. We recommend this storage rack especially to glass production facilities, stoneworks facilities, furniture production facilities and advertising companies, which want to use their space effectively. The racks are delivered for self-assembly in a package. The assembly is very simple and easy owing to our long-term experience which allowed us to create a well-thought product which is attached with the assembly instructions, making the assembly trouble-free. In case of any problems, do not hesitate to contact our technical department. We also provide charged assembly services by our technicians in your location. M80-16 RACK TECHNICAL DATA Intended use – single glass panes 255 cm x 160 cm Maximum pane size - 275 cm x 170 cm Number of partitions -16 The width of the storage strip for glass – 8 cm The length of the storage strip for glass - 308 cm The material on which glass is placed – wooden board 308 cm x 8 cm x 2.5 cm Structure height (A) – 218 cm Structure width (B)- 254 cm Structure depth (C)-318 cm Space needed for the correct use of the rack – 15 m2 Requirements for the ground – smooth/straight The number of the partition guide bearings – 8 pcs. Front wheel – Ø 160 / reinforced polyamide Rear wheel – steel wheel with a bearing / rolled along the profile Colour - RAL 7040 (grey) Anti-corrosion protection – phosphating and powder-coating of steel elements Permissible load-bearing capacity of a single partition – 900 kg Permissible load-bearing capacity of the whole rack – 14 400 kg Partitions inclination – left or right – depending on assembly Assembly time - 10 hours The number of people required for assembly – 2 people DOCUMENTS ATTACHED TO M80-16 RACK - User’s Manual - Assembly Instructions Ijdpfxjhbduze Acujtn - Rating plate - 12 months’ warranty We also deliver our racks for glass to the EU countries and other countries.