Used Offset Printers for sale (2,125)

Condition: used, Year of construction: 2014, functionality: fully functional, machine/vehicle number: 551198, paper width (min.): 400 mm, paper width (max.): 720 mm, paper height (min.): 480 mm, paper height (max.): 1,020 mm, Equipment: documentation/manual, ▪ Preset Plus feeder, ultrasonic + side-lay double-sheet detection ▪ AutoPlate Pro automatic plate changing ▪ Sheetfed Control (CAN-Bus), decentralised drive control ▪ Automatic blanket washing + Tandem Wash-up ▪ Prinect Press Center console, remote inking, Wallscreen ▪ Alcolor dampening, Alcolor Vario, IPA kit ▪ Sheet travel monitoring sensors ▪ CombiStar CANopen (temperature, alcohol, pH) ▪ Inpress Control ×2 with inline register correction ▪ Preset Plus delivery, direct-drive suction-belt sheet brake Cjdpfxs Ahqlcj Aqvjhd ▪ Remote-controlled oscillating rollers ▪ PowerStar AP 500 Duo + CleanStar Compact ▪ StaticStar Compact antistatic ▪ AirStar Pro, ScrollStar compressor, UPS

Year of construction: 2021, condition: like new (used), functionality: fully functional, machine/vehicle number: R1.2.0022, The Kumovis R1 (now marketed as the EXT 220 MED by 3D Systems) is a high-performance industrial 3D printer specifically designed for the medical sector and the additive manufacturing of implants. Key features: • Technology: Fused Layer Modeling (FLM) / Fused Filament Fabrication. Codpfxe Ah E D Rj Aqvohd • Sterile environment: It is the only extrusion platform that integrates a clean/sterile environment with thermal control and laminar airflow to prevent any contamination during printing. • Compatible materials: Designed to process high-performance and biocompatible polymers such as: • PEEK and PEKK • PPSU (Radel®) • PEI, PLLA, PLGA, PCL, PDO • Filled variants (carbon fibers, tricalcium phosphate/BCP). • Medical applications: Manufacturing of customized medical devices and small batches directly in the hospital or at the point of care: • Cranio-maxillofacial implants • Bone plates and trauma plates • Spinal cages • Suture anchors and surgical instruments Evolution: • Originally developed by the German start-up Kumovis (founded in Munich), the technology was integrated into 3D Systems' portfolio and renamed EXT 220 MED.

Condition: used, functionality: unexamined, Year of construction: 2018, operating hours: 1,270 h, Printer was relocalised to different production plant but was never again installed in new location and new production director Codpfxo Ah Edgo Aqvehd prefare different 3D printing technology - HP.

Condition: used, functionality: fully functional, machine/vehicle number: 3-1-01699-02-37 (5LM37), Year of construction: 2015, operating hours: 46,537 h, type of input current: three-phase, input voltage: 400 V, input current: 16 A, laser power: 10,000 W, feed length X-axis: 275 mm, feed length Y-axis: 275 mm, feed length Z-axis: 420 mm, power: 10 kW (13.60 HP), We are offering a used 3D Systems ProX 350 3D printer, manufactured in 2015. Type: ProX 350 Manufacturer: 3D Systems Year of manufacture: 2015 DMLS (Laser Beam PBF) - Powder 3D Printing Technology. Materials: Metal (used Titanium) - Ceramic Electrical supply: 3 × 400 V AC + N + PE Frequency: 50–60 Hz Rated current: 16 A Power: 10 kW Chjdpfxo Ahyw To Aqvod Rated short-circuit current: 6 kA Serial number: 3-1-01699-02-37 Compliance: 21 CFR 1040.10 and 1040.11 Machine sold complete with the following components: -Powder feeding unit -External filter -Vacuum pump -Blower -Recycling unit -Chiller If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: good (used), functionality: not functional, machine/vehicle number: 155-11000 (K10170), Year of construction: 2017, operating hours: 3,000 h, input voltage: 208 V, input current: 18 A, input frequency: 50 Hz, laser power: 5,000 W, Industrial 3D printer – Stratasys Fortus 450mc Technology: additive manufacturing via fused deposition modeling (FDM). Year of manufacture: 2017. Compatible materials (thermoplastics): ABS-ESD7 ABS-M30 / M30i ASA Nylon 12 Chedpfo Ahpf Hjx Aqved PC-ABS ISO / PC ULTEM 1010-CG ULTEM 9085-CG Overall condition and technical information: Machine is functional at approximately 90%. Reconditioning of the spool supports is required. Software version: 6.2.6624.0. Print head number: P2-1. Industrial machine designed for the production of prototype parts, functional parts, and small production runs in technical thermoplastic materials.

Condition: like new (used), Year of construction: 2003, functionality: fully functional, Heidelberg SM 74-4-H 2003 Model 41 million impressions Alcolor CP-2000 Autowash AutoPlate Cede Agpx Njpfx Aqvshd

Condition: used, functionality: fully functional, Year of construction: 2018, Printer was used at research centre but last 5 year after the printer was repaired , there was changed printing head in 2021 and since there the printer was not used much Chodpfxe Ah E Nrs Aqvjd

Condition: excellent (used), Year of construction: 2002, We are offering this very well-maintained Heidelberg Quickmaster DI 46-4 offset printing press, manufactured in 2002, for sale. In addition, printing inks, printing plate rollers, and additives can be purchased. Sale due to company closure. The machine is still in production and can be inspected at any time. A video can be provided upon request. Manufacturer: Heidelberg Model: Quickmaster DI 46-4 Year of manufacture: 2002 Chsdpsz H Undjfx Aqvsd If you have any questions or require further information, please send us a message or call us.

Condition: used, functionality: fully functional, machine/vehicle number: 200123013-09, Year of construction: 2018, type of input current: three-phase, overall weight: 1,360 kg, input voltage: 208 V, input frequency: 50 Hz, laser power: 10,000 W, feed length X-axis: 381 mm, feed length Y-axis: 330 mm, feed length Z-axis: 457 mm, We offer a used 3D Systems PROX 500 3D printer, model ProX 500 (132540-00 Rev A), designed for polymers, manufactured in 201. Chodpe Ahq I Refx Aqvsd Manufacturer: 3D Systems, Inc. Model: ProX 500 Materials: Polymers Serial Number: 200123013-09 Electrical Supply: 208 V AC, three-phase, 50/60 Hz Apparent Power: 10 kVA Weight: 1360 kg Short-circuit interrupting current: 200 kA Electrical Diagram Number: 132508-00 Laser Class: Class 1 laser product; Class 4 laser inside Included option: ProX MQC (2017) S/N 20052303004 Donalson Torit DCE If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 155-110000, Year of construction: 2017, operating hours: 20,000 h, total length: 1,300 mm, total height: 2,000 mm, total width: 900 mm, overall weight: 601 kg, input voltage: 380 V, input current: 8 A, For sale: Professional industrial Stratasys Fortus 450mc FDM 3D printer in exceptionally good condition. A highly reliable and precise 3D printer, ideal for functional prototypes, jigs/fixtures, and end-use components in technical plastic materials. The machine is supplied as a complete, turnkey solution, including an SCA 3600 post-processing station, a wide range of print nozzles (tips), material canisters, and consumables. Specifications & Machine Information * Model: Stratasys Fortus 450mc * Serial number: K10456 Codpfxjzqz Hwe Aqvehd * Software version: 6.8.7102.0 * Build volume: 406 x 355 x 406 mm * Activated material licenses: Extensive license package included: * ABS (ABS-M30, ABS-M30 Black/Blue/Custom/Grey/Red/White, ABS_ESD7, ABS_M30I) * ASA (FLUX/BLU, DGRY, GRN, LGRY, ORG, RED, WHT, YEL, BLK) * PC / PC-ABS / PC-ISO (incl. PC-ISO Translucent & PC Support) * Nylon 12 / NYL12CF (Carbon Fiber) * Antero 800NA / Antero 840CN03 * ST130 * Soluble Supports (SR30, SR35, SR100, SR110) Included equipment & accessories 1. Post-processing & Chemicals * SCA 3600 (Support Cleaning Apparatus): Washing station for easy and automatic removal of soluble support materials (SR30/SR100/SR110). * WaterWorks Concentrate P400SC: Cleaning concentrate for washing tanks. 2. Nozzles & Print Head Components (Tips) Large, assorted selection of print and support nozzles, as well as scrapers (see image): * Modeling tips: T12, T14, T16, T20, T20C * Support tips: T12SR100, T12SR30, SR30/35, U1010S1, ULTEM Support T16, etc. * Extra scraper blades/cleaners. 3. Materials & Canisters Large selection of filament spools/canisters and original boxes included (incl. ULTEM 9085, ULTEM Support, ASA, ABS-M30, PC Support, SR-110 soluble support, etc. – please note that some may be partially used or past their expiration date, but have been stored in a dry place).

Condition: good (used), Automatic cloth rewinder for offset printing machines Manufacturer: Vliesstoff Kasper Very good condition. Chjdpfoz R Ir Eox Aqved 380V power supply, foot pedal control Device suitable for B1 and B2 format machines

Condition: like new (used), Year of construction: 2021, operating hours: 6,000 h, functionality: fully functional, paper weight (min.): 60 g/m², paper weight (max.): 120 g/m², paper width (min.): 165 mm, paper width (max.): 330 mm, paper height (min.): 200 mm, paper height (max.): 450 mm, total length: 12,945 mm, total width: 2,000 mm, space requirement length: 14,945 mm, space requirement width: 4,000 mm, year of last overhaul: 2026, type of input current: three-phase, Equipment: CE marking, documentation/manual, Semi-rotary offset continuous label printing machine. BST Band Guide (Germany) 5 x 330 offfset printing units Chsdpfxjz Hkpkj Aqved 1 Delam Relam Flexo Unit 6 Light UVI lamps Cip 3 automatic inkwell system CCD Camera (BST Germany) Slitting Die with diffsystem. Non stop rewinder with lamination Second pass

Condition: used, Year of construction: 2013, Technical specifications: Build volume/build size max: 1,000 × 800 × 500 mm, layer thickness up to 27 microns, high speed: up to 3 base resins, 27 µm resolution, super-high speed: 1 base resin, 55 µm resolution, PolyJet UV technology, 110-240 V, dimensions: 2,870 x 1,960 x 2,105 mm, weight: 2,200 kg; NOTE: The printer was fully overhauled by STRATASYS in 2025, and an upgrade costing approximately €135,000.00 net was installed; additionally, it comes with accessories such as an exchangeable print plate with a mobile lifting frame, various spare parts, and various printing materials. Fully functional condition. The machine is already located at another site at Kartonstraße 2, D-88255 Baienfurt. Free loading FCA D-88255 Baienfurt. Cjds Af Nl Repfx Aqvehd

Condition: good (used), functionality: fully functional, Year of construction: 2016, overall weight: 600 kg, feed length X-axis: 406 mm, feed length Y-axis: 355 mm, feed length Z-axis: 406 mm, Stratasys Fortus 450mc for sale, Contruction year 2016, low operating hours The Stratasys Fortus 450mc is an industrial-grade FDM (Fused Deposition Modeling) 3D printer, widely used in aerospace, automotive, and medical device manufacturing for functional prototypes and end-use production parts. This unit has been operated in a professional production environment and is fully functional. Technical Specifications: Build envelope: 406 x 355 x 406 mm (16" x 14" x 16") Technology: FDM (Fused Deposition Modeling) Chedpfx Aqoznl N Rsved Layer thicknesses: 0.005"(0,127mm) / 0.007"(0,178mm) / 0.010"(0,254mm) / 0.013"(0,33mm) Number of material bays: 4 - 2 model + 2 support Machine weight: approx. 600 kg Machine running on external Air pressure, to reduce machine noice. Internal air compressor can be purchased and installed. Materials/Licenses: ABS, ASA, PC, PC-ISO, PC-ABS, Nylon12, ULTEM9085, ULTEM1010, Antero. Included: - Fortus450mc + EU Transformer. - Support Removal Wash Unit (German Sonic Cleanstation UW90) Machine located in Roskilde, Denmark

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, PQC-S Console SAPC Semi -Automatic Plate Change KMS 4 - Komori Monitoring System Chedpfx Ae Af Iaksqvod KHS -AL: Pre-Inking System Skeleton Transfer Cylinders Komorimatic Dampening Unit AMR (Automatic-Make-Ready) Automatic Impression Cylinder Washing Device Automatic Ink Roller Washing Device Automatic Blanket Washing Device Ink. Temperature Control Coating System Tresu with Doctor Chamber Blade Grafix IR Dryer Grafix: Powder Sprayer Ink declutch on 1st and 6th unit Impression Account: 145 Mio.

Condition: used, functionality: fully functional, operating hours: 33,105 h, Year of construction: 2015, laser hours: 6,024 h, laser power: 15,000 W, We offer a used PHENIX SYSTEMS Prox 300 (DMP) system, manufactured in 2015. Cjdpo Ahzbpsfx Aqvohd Manufacturer: PHENIX SYSTEMS Model: Prox300, Type: 5006073Z00 DMLS Technology: Direct Metal Laser Sintering. Materials: Metal, Ceramic (used on Inconel). Year of Manufacture: 2015 Serial Number: 1584305 Type: 5006073Z00 Power: 15 kW Voltage: 400 / 480 V If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: used, functionality: limited functionality, Year of construction: 2013, operating hours: 5,400 h, Stratasys Objet Connex 500 industrial multi-material PolyJet 3D printer available for sale in the UK. Chedpfezy Rwqjx Aqved The machine has approximately 5,400 operating hours and powers up successfully. When inspected, the machine was not displaying print-head errors. The printer has not recently completed a test print because the printing materials/resins currently installed have expired. We are therefore selling the machine transparently as requiring recommissioning and fresh materials before full production operation can be confirmed. The Connex 500 is an industrial PolyJet additive manufacturing system designed for professional prototyping and multi-material applications. Its large build platform and ability to work with different material characteristics made the Connex range particularly suited to engineering, product development and prototype production. The machine was removed from a commercial environment and is now surplus to requirements. Known condition: Powers up successfully Approximately 5,400 operating hours No print-head errors observed during inspection Existing resin/material is expired Full print cycle has not been tested with fresh material Offered in its present condition Inspection welcomed prior to purchase This could represent a good opportunity for an existing Stratasys/Objet user, specialist reseller or refurbishment company familiar with the Connex platform. The machine is located in the United Kingdom. Further photographs and a video showing the machine powered on can be supplied on request.

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, operating hours: 467 h, total length: 840 mm, total height: 1,020 mm, total width: 750 mm, overall weight: 500 kg, input voltage: 400 V, input frequency: 50 Hz, feed length X-axis: 500 mm, feed length Y-axis: 400 mm, feed length Z-axis: 510 mm, space requirement length: 840 mm, space requirement height: 1,020 mm, space requirement width: 750 mm, 3D printer Evotech EL 102 – professional-grade machine with a large build volume. Original price: €60,000. Inspection possible in Upper Bavaria. Only 467 operating hours! For sale: an Evotech EL 102, a professional FDM/FFF 3D printer manufactured in Austria. This machine is ideal for prototyping, small-batch production, and the manufacturing of functional components with the highest quality requirements. Price negotiable. Technical specifications: - Model: Evotech EL 102 - Printing process: FDM/FFF (Fused Filament Fabrication) - Build volume: approx. 500 × 400 × 510 mm - Extruder: 2 independent extruders (dual extrusion) - Nozzles: 0.4 mm standard (replaceable, other sizes optional) - Layer thickness: 0.05 – 0.6 mm - Print bed: heated, PEEK or metal print plate - The print bed is equipped for mounting print plates with a vacuum system. - Automatic print bed calibration before program start. - Materials: ABS, PLA, PETG, PA, PEEK…, technical filaments with CF+GF and support material. - Two independent filament drying chambers for a better and cleaner process. - Print head and drive servos are cooled. - Temperatures: Extruder up to 410 °C, heated bed up to 120 °C, build chamber heating up to 100°C - Software: compatible with Simplify3D, Cura, Slic3r - File formats: STL, OBJ, G-Code - Power supply: 400 V, 50/60 Hz - Dimensions: approx. 840 × 750 × 1020 mm - Weight: approx. 500 kg Features & Advantages: - Stable all-metal construction for precise continuous operation. - Large, enclosed build volume for demanding materials. - Dual extruder for multi-material and support structures. - Industrial-grade mechanics & control. - Smooth operation, low vibration. - Optimal for research & development, prototyping and small series production. - The first update package was installed during a service. Condition: - Used, very well maintained. Chodpfx Aqeztn Dzsvsd - Fully functional and ready for immediate use. Spare parts + consumables as well as various filament types are included. See pictures. Service: - Loading with a forklift possible. - Transport via freight forwarder. - Offered price is net. - Invoice with VAT possible. We are selling because the machine no longer fits into our service portfolio.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 33234, Year of construction: 2013, Stratasys Objet 260 Connex – Professional 3D Printer For sale: Stratasys Objet 260 Connex 3D printer, year of manufacture 2013. The machine comes from a professional environment and is suitable for applications such as prototyping and product development. Optional accessories are negotiable. Cedpfsyag Imex Aqvshd Further information available upon request.

Condition: like new (used), functionality: fully functional, Year of construction: 2014, operating hours: 300 h, Equipment: ABS, The printer is in almost new condition and has been used very little. Chjdpfsz Ep Dksx Aqvjd

Condition: ready for operation (used), Year of construction: 2006, operating hours: 76 h, functionality: fully functional, RYOBI 524 GX – Year 2006 4-Color Sheet-Fed Offset Printing Press | Technical Specification | Details | |---|---| | Manufacturer | Ryobi, Japan | | Model | 524 GX | | Year of manufacture | 2006 | | Number of printing units | 4 | | Maximum sheet size | 520 × 375 mm | | Minimum sheet size | 100 × 105 mm | | Maximum printing area | 505 × 350 mm | | Stock thickness | 0.04–0.60 mm | | Printing speed | 3,000–15,000 sheets per hour | | Plate size | 510 × 400 mm | | Feeder pile height | 800 mm | | Delivery pile height | 430 mm or 700 mm, depending on the configuration | | Feeding system | Rotary stream feeder | Chodpfx Aqo Ahymqovod Maximum printing speed depends on the substrate, consumables, and required print quality. Installed equipment and delivery configuration should be confirmed for this particular machine.

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, operating hours: 183 h, total length: 685 mm, total height: 1,070 mm, total width: 645 mm, overall weight: 120 kg, input voltage: 230 V, laser power: 30 W, feed length X-axis: 165 mm, feed length Y-axis: 165 mm, feed length Z-axis: 300 mm, space requirement length: 1,495 mm, space requirement height: 1,870 mm, space requirement width: 1,255 mm, Formlabs Fuse 1+ 30W SLS Production Cell: 2 Printers, Fuse Sift with Industrial Vacuum, Fuse Blast with Polishing System and 4 Build Chambers Complete, ready-to-run SLS production system in great condition, sold as one package What is included - 2 x Formlabs Fuse 1+ 30W SLS 3D printers (230V), each with 2 build chambers (4 in total) Chjdpfx Aj Adqx Toqvjd - 1 x Formlabs Fuse Sift powder recovery station (230V) - 1 x Formlabs Industrial Vacuum 230V, supplied with the Sift [hose and accessories included] - 1 x Formlabs Fuse Blast automated blasting station with the Fuse Blast Polishing System upgrade (cleans and polishes in one step) Hours and condition - Printer 1: 1,369.68 print hours - Printer 2: 183.6 print hours (very low) - All units in great condition. Serial numbers available on request. Why this setup Four build chambers across two printers let you swap chambers and start a new print as soon as the last one finishes. The Sift and vacuum handle powder recovery and the Blast handles finishing, so no further post-processing equipment is needed. Key specification (per printer) - Build volume: 165 x 165 x 300 mm - Laser: ytterbium fibre, 30 W - Layer thickness: 110 microns - Materials supported by Formlabs: Nylon 11, Nylon 11 CF, Nylon 12, Nylon 12 GF, TPU 90A - Power: 230V, dedicated circuit Offers: offers on the full package are welcome. A separate sale of one printer may be considered for the right offer; please message to discuss. Collection and delivery: not included in the price. The buyer arranges and pays for collection or pallet freight, including packing and loading. Each printer weighs about 120 kg without chamber or powder, so a forklift or tail-lift is needed. Allow access of about 125.5 x 149.5 x 187 cm per machine. Viewing by appointment.

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, ASM -DEK- NeoHorizon 01 iX stencil printer. Quantity: 2 units. The machines are equipped with the HawkEye 750 camera Codpfxj Agniqj Aqvjhd and feature the DEK Cyclone vacuum system. Otherwise, they are in very good condition and available immediately. Inspection possible by appointment. We will gladly answer any questions you may have about these DEK machines.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 6618G03006, Year of construction: 2018, operating hours: 10,500 h, total length: 1,818 mm, total height: 2,185 mm, total width: 2,700 mm, type of input current: three-phase, overall weight: 2,500 kg, input voltage: 400 V, input current: 28 A, compressed air connection: 8 bar, input frequency: 50 Hz, laser power: 400 W, ambient temperature (min.): 18 °C, ambient temperature (max.): 25 °C, table width: 250 mm, table length: 250 mm, We offer this showroom Concept Laser M2 metal 3d printer - Laser Powder Bed Fusion system (LPBF / SLM) + peripherals Specification: - Manufacturer: Colibrium Additive / GE Additive / Concept Laser from Lichtenfels, Germany - 400 W singlelaser, 3D optics (variable focus) - ScanLab Intelliscan + VarioScan, internal water cooling and air conditioning of optical parts - Build envelope: 250 x 250 x 350 mm - Scanning speed: 4,5 m/s with variable focus - Focus diameter: 70 - 500 μm - Layer thickness: 20 - 80 μm - Connected loads: Max. power consumption 10 kW; Power supply 3/N/PE AC 400V, 32A connector; compressed air 6-10bar - Inert gas supply: 2 gas connection provided - Ar and N2 (machine was used with argon mostly) - Filtering system: integrated, with a 20 m2 filter surface - Dimensions 2695 x 1818 x 2185 mm (W x D x H) - Weight: approx. 2,500 kg - Operating conditions: 18 - 25°C - Holders for three different recoater blades types included - A few aluminum and steel build plates included Includes material parameters for: - 316L stainless steel (1.4404), - AlSi10Mg aluminium alloy, - M300 hot-work steel (1.2709), - TiAL6V4 titanium alloy, - 17-4 PH precipitation hardening steel - Parameters for other materials can be inquired from manufacturer Machine has been used with 316L and Aluminium only. Extra options (included): - IP camera for process monitoring with independent network connection. - Additional filter box for quick filter exchange. Age and condition: slightly used Machine installed at showroom in 2019 for demonstration purposes only: Building demo parts for potential customers, buildjobs at trade fairs and our customer open days, some builds for students. Basically, not more than 20% usage of what could be expected of its age. Maintained by certified service technician only. All manufacturers safety service patches and updates until this date have been applied. Machine clock: 10.500 hours - not a "Laser ON time", that is expected significantly lower. Auxiliary equipment (included): - Internal sieving device - to be mounted on top of dose chamber - External sieving station QM Powder - for independent inertized sieving process --- Size: 1050 x 995 x 1600 mm --- Weight: 350 kg --- Power: 3 P/N/PE AC 400V, ±10%, 50Hz-60Hz --- Compatible with bottles and Concept Laser M2 powder containers - Wet vacuum cleaner for powder materials Ruwac NA7-11 - Electric lifting device with vibration generator for powder containers - filling machine and external powder sieving - Stylish storage for 4 powder containers (some containers included with the machine) --- Size: 1150 x 1220 x 870 mm (H x W x D) --- Weight: 250 kg Original price: 550.000 Eur Optional auxiliary equipment (not included in listing price): - Nitrogen generator: Parker N2 Midigas 6 (requires compressed air input) with 250L buffer tank -- Extra 1000L buffer tank for nitrogen generator for faster inertization + 4.000 Eur - Heat treatment furnace with gas chamber and trolley: Nabertherm N 41/H -- Chamber: 350 x 500 x 250 mm (W x D x H) -- External dimension: 840 x 1160 x 1320 mm (W x D x H) -- Weight: 260 kg + 3.000 Eur If you have any questions or need more information, feel free to send us a message or give us a call. Chedpfxsz T Nc Do Aqvjd Video conference can be set up if needed. Machine can be seen at our showroom. Visit is possible upon contact. Misan is Czech authorized reseller for metal AM machines.

Condition: used, Year of construction: 1994, functionality: limited functionality, machine/vehicle number: 356517, type of input current: three-phase, input voltage: 400 V, Machine make: Koenig & Bauer (KBA) Model: RAPIDA 104 Year of manufacture: 1994 Machine No.: 356517 Technical specifications: format min. 450 x 640 mm, max. 1,020 x 720 mm Maximum printing speed: 12,000 impressions/hour (when new) Equipment: - BALDWIN automatic blanket washing system - Automatic format adjustment system - BALDWIN alcohol dampening system - BALDWIN chiller for fountain solution preparation - IR dryer for printed sheets Chodpj Ahwkcjfx Aqvjd