Used Annealing Furnace for sale (837)

Condition: good (used), debinding and sintering chamber furnace, make Nabertherm type: LH 280/13 DBS temp. max.: 1300°C internal dimensions (w x d x h): 750 x 750 x 500 mm external dimensions (w x d x h): 1250 x 1750 x 2100 mm loading weight : max. 150 kg power: 44 kW heating: 5-sides heated control zones: 1 weight: 700 kg voltage: 400 V 3/N current consumption: 63 A - with an air heater under the furnace, pre-heated air with a temperature of up to 400°C can be flushed into the furnace chamber during the debinding phase. Lasdpfx Agemfn Ruozok - controllable cooling housing with autom. ball valve - automatic exhaust damper - automatic exhaust flap - monitoring of fresh and exhaust gas volume flow, as well as furnace chamber pressure by differential pressure monitor. -The furnaces themselves, particularly the brickwork, heating elements, and insulation, are in excellent condition with low or no working hours, making them practically like new. -To operate these furnaces, it will be necessary to implement at least one temperature controller per furnace, a PLC, or a similar control system.

Year of construction: 1996, condition: used, functionality: fully functional, load capacity: 650 kg, IPSEN DAQ 7-8 Manufacturing Year : 1996 Lajdexivumepfx Agzek Heating : Gas Heaters : Recon 2 (x3) Charge Capacity : 650kg Brutto Charge dimensions : W:650mm L:1173mm H:550mm Protective Gasses : Endogas Ammonia Nitrogen The furnace can be operated with existing conditions.

Year of construction: 2024, condition: new, functionality: fully functional, Convection baking oven Powder furnace new SLS - 90 / O * D + t Transit oven divisible Memorized 1400 wide x 2000 height x 6500 depth Dimensions 1920 wide x 2810 height x 6800 depth Electric power supply Rated power 90 kW Voltage 380V Frequency 50-60 Hz Lajdpfxjcutrls Agzjk Door type: 2 doors on either side - passage oven Anti-ex Castle Warm-up time 15-30 min. (180 ° C) Homogeneity < ± 3 ° C, if 180 ° C Max < ± 3 ° C Temperature of 230 ° C Max Transport: selectable Air circulation fan Heaters removable roof heating panels Vertical circulation Fan mounted radially on removable panels Door double two doors on two sides (Durschlaufofen) Divisible Motor 1,1 kW 6480 L capacity Warranty 12 months GERMAN-SPEAKING CONTACT IN GERMANY JUST ASK THEM Delivery time approximately 12 to 16 weeks after ordering Shipping costs will be calculated individually. Also plants according to your wishes. More information under Romer Germany Electrostàtica pintura, pintura en pole, powder coating, Jauhemaalaus, muovijauhetta, Peinture en poudre, thermoplastique, Verniciatura a polvere, Poederlakken, Порошковая окраска, Порошкове фарбування gemapulverbeschichtungskabine Powder coating plant Powder coating plant Powder coating cabin for powder coating Surface technology Powder gun Powder guns Einbren

Year of construction: 1994, condition: used, Protective gas conveyor belt furnace Working space: 450 mm wide, 110 mm high Electrical connection values: 3 x 400 volts, 50 hertz Heating: electric, heating coils, semiconductor relay "on/off", 100 kW, capacity: approx. 200 kg / h Working temperature: max. 1100° C Heating zones: 6 Belt construction: mesh belt made of high-temperature-resistant steel, width approx. 450 mm Cooling zones: cooling zone 1 approx. 1.4 m, cooling zone 2 approx. 3.0 m, cooling zone 3 approx. 4.5 m Cooling zones made of normal sheet steel (St 37) as double-walled circulation cooling sections with measuring gas extraction nozzles Lodpfov Ipcxsx Agzeak Protective gas: nitrogen N2, hydrogen H2 Dimensions: heated length (6 zones) approx. 3500 mm, furnace length approx. 4600 mm, feed table approx. 5280 mm, removal table approx. 1500 mm, total width approx. 1800 mm, total height approx. 2100 mm, total length approx. 23 m No gas table included.

Year of construction: 2016, condition: ready for operation (used), Suitable for stainless steel wire: 1.4301, 1.4310, 1.4401, wire diameter: 0.25-0.5mm with a strength up to 2400 N/mm², working speed: 75-80m/min, temperature range: 400-650°C, suitable for four wires at the same time with one temperature gauge (movable), shielding gas: forming gas grade 95/5 95%N2/5%H2, nitrogen gas, cooling: water-cooled tubes. Ledpfxjn R Nhqj Agzoak

Condition: ready for operation (used), Heat treatment furnace, annealing furnace, furnace, Used equipment Ljdpsuhmacjfx Agzeak Manufacturer: Budapest Electric Cable Factory Overall dimensions: 890 x 1350 x 1510 mm Weight: 785 kg Electrical data: 400 V, Temperature controller adjustable up to 1100°C +temperature controller in the electrical box

Condition: excellent (used), Walking beam-forging furnace, make Ruppmann max. temperature: 1.250°C Lodpfxsid Im Ee Agzjak useable dimensions (l x w x h): 3.400 x 1350 x 120 mm throughput: 1 ton/h heating: natural gas Heating thru 4 hot air radiant ceiling Bloom burners, with flame monitoring by Kromschröder burners. Temperature measurement by thermocouples, as well as automatic and stepless temperature control. Heat exchanger, combustion air fan.

Condition: good (used), Laboratory Tube Furnace Naber R70/9 - Housing made of high quality structural steel. - The diameter of the tube is 70mm - The length of the tube is 1000mm - Tube made of sillimantine, works with two end caps 60 - damaged on one side. - Silent electronic relay Lodpjdy Huyjfx Agzoak - Maximum temperature - 1200C - Temperature drop - 10 C / min - Programmable temperature curve

Year of construction: 2019, condition: new, Convection baking oven Gas oven CGN oven Powder furnace NEW SGS- 800/ O Gema Optiflex width 2500 mm height 2500 mm depth 12500 mm directly from the manufacturer. More information under Romer-Germany Lodpjcw Tzxefx Agzoak

Year of construction: 2008, condition: used, Protective gas conveyor belt furnace Working space: 700 mm wide, 230 mm high Electrical connection values: 3 x 400 volts, 50 hertz, approx. 160 kW Heating: electric, heating coils, semiconductor relay "on/off" Working temperature: max. 1130° C Heating zones: 4 Belt construction: mesh belt made of high-temperature-resistant steel, width approx. 700 mm Belt speed: adjustable from approx. 50-800 mm / minute Cooling zones: cooling zone 1 as a wear part with insulation; 8mm base plate reinforced with beads, double-walled construction, length approx. 1.5 m, cooling zone 3 + 4 as double-walled convection cooling section Cooling zones made of normal steel sheet (St 37) as double-walled circulation cooling sections with measuring gas extraction nozzle Protective gas: Exogas, Endexo retorts with insulating flange installed in the furnace Dimensions: Working height approx. 1000 mm, heated length (4 zones) approx. 3750 mm, furnace length approx. 6000 mm, feed table approx. 1200 mm, total length approx. 20 m Lodpfxjv Imhxs Agzsak Furnace is available twice (built in 2008 and 2013)

Year of construction: 2008, condition: ready for operation (used), Loading chamber dimensions: 280x580mm, loading height: 700mm, max. load: 300kg, with protective housing and documentation, machine was functional until the end, complete maintenance would have to be carried out on the machine, inspection is possible. Laodpoqgfbgjfx Agzok

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: Seriennr.: 4046, Equipment: documentation/manual, Ingot casting belt 600 Lsdpfx Asu S N Ahegzoak Zinc melting furnace ZSO 600 / 700 B

Year of construction: 2016, condition: new, Gas heated tempering furnace type: KA_TRU_GB external dimensions (w x h x d): 1700 x 2050 x 3900 mm useable dimensions (w x h x d): 600 x 850 x 1800 mm temperature: max. 600°C Lasdpfocdixlex Agzsk circulation fan: 4,0 kW loading weight: 3.000 kg gross

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, temperature: 630 °C, power: 450 kW (611.83 HP), plate length: 1,400 mm, plate width: 1,100 mm, TECHNICAL DETAILS Device type: Glass heating furnace for deep processing Application: Homogeneous heating and subsequent cooling of flat glass Suitable glass: clear float glass Maximum glass size: 1,400 × 1,100 mm Furnace Furnace width: 1,600 mm Opening/closing height: 500 mm Opening mechanism: electric Motor power for opening/closing: 1.5 kW Temperature: 630 °C Rollers Roller type: quartz rollers Roller diameter: 60 mm Number of quartz rollers: 46 Number of rollers in the cooling section: 22 Roller spacing: 100 mm Heating Heating system: electric with forced convection Heating power: 450 kW Control: PLC control with zone-dependent temperature regulation Speed Speed range: 1 – 10 m/min MACHINE DETAILS Supply voltage: 380 V Power supply: 3-phase, 5-wire AC Total weight: 10 t System configuration Components: Computer, control cabinet, power control cabinet, loading table, heating section, coating section, cooling section, unloading table Process sequence 1. Glass loading: The flat glass is placed on the loading table and transported into the heating section. 2. Heating: In the heating section, the glass is uniformly heated to high temperatures. 3. Coating: After heating, a special coating is applied in the coating section. 4. Cooling (Annealing): In the cooling section, the glass is uniformly and slowly cooled to reduce stress. 5. Glass unloading: The processed glass is conveyed to the unloading table and removed. EQUIPMENT - Computer - Control cabinet - Power control cabinet - Loading table - Heating section - Coating section Ljdpfowtfiqex Agzjak - Cooling section - Unloading table - Zone-wise controllable heating system via PLC control - Forced convection system for uniform heat distribution - Quartz rollers with close spacing for precise glass guidance - Integrated cooling section with 22 rollers for controlled glass cooling The furnace has been dismantled into components of approximately two meters in length. This allows transport with standard trucks.

Condition: new, 7 pieces heating coil new for a melting furnace Fulmina SOU 20E, Technical data: Reversible element with connection ends Ø 10 x 270 mm power: 10.000 Watt Voltage: 220 Volt cold resistance: 4,60 (± 5%) Ohm wire diameter: 4,50 mm coil inner Ø: 29 mm leg length: 240 mm Number of legs: 3 x 8 pieces Wire quality: CrFeAl Y Ljdpfx Asd Tx A Esgzjak 3 heating coils are a complete set in this model (the pictures of the melting furnace serve the representation and show the model in which the heating coils were installed, they fit however also into other models with smaller or higher achievement, it changes only the number of pieces) immediately available from stock

Year of construction: 2008, condition: used, Protective gas conveyor belt furnace Working space: 450 mm wide, 140 mm high Ljdpfx Aev Igcpogzjak Electrical connection values: 3 x 400 volts, 50 hertz, approx. 185 kVA Heating: electric, heating coils, thyristor control "on/off", heating output approx. 174 kW, output > 400 kg br. Working temperature: max. 1150° C Heating zones: 6 Belt construction: Mesh belt made of high-heat-resistant steel, width approx. 450 mm Belt speed: Adjustable from approx. 100-900 mm / minute Heating muffle: Heat-resistant curved construction with bead reinforcements, length: approx. 6.85m, material: 1.4841 Cooling zones: Zone 1 approx. 1 m, Zone 2 approx. 4.0m, Zone 3 approx. 4.0m, Zone 4 approx. 4m Cooling zones made of normal sheet steel (St 37) as double-walled circulation cooling sections with measuring gas extraction nozzles Protective gas: Nitrogen N2, Hydrogen H2 Dimensions: Working height approx. 1060 mm, heated length (6 zones) approx. 5800 mm, furnace length approx. 6600 mm, feed table approx. 10000 mm, removal table approx. 2000 mm, total width approx. 1900 mm, total length approx. 38 m, total height approx. 2100 mm

Year of construction: 2010, condition: ready for operation (used), Heated surface: 1600x2600/ 2000x2000mm, nominal power: 120kW, length: 2600mm, width: 2300mm, with control cabinet and conveyor. Lsdpfeifpuasx Agzsak

Year of construction: 2000, condition: excellent (used), functionality: fully functional, maximum load weight: 7,000 kg, working height: 1,750 mm, The gas nitration vacuum oven is made up of all the steps involved in gas nitration, carburizing, and tempering. The machine is in very good condition. Lodpfxju T N Efo Agzsak

Year of construction: 2020, condition: used, machine/vehicle number: KW-50S/SW/20/01, KW50S warming chamber, furnace Laodpfx Ageu Hk Epszsk The device is designed for thermal processing of materials whose flash point is higher than 300 degrees C. The device consists of two independent operating chambers. Each chamber has its own control system. The chambers have windows that allow the tracking of the device's operation and a lighting function. The chamber has the ability to achieve ramp temperatures up to 120 deg C. The warming chamber is built as an independent panel structure mounted on a frame. The connection of the individual elements is carried out by means of welds, rivets and screws, without any additional structural elements. The connection points of the panel structure are sealed with rubber tape and silicone adhesives. Air circulation inside the chamber is forced by centrifugal fans installed above the heaters.

Year of construction: 2010, condition: refurbished (used), Vacuum furnace for heat treatment of metals with a molybdenum chamber. A high vacuum of 10^-6 mbar is achieved in the furnace. Maximum operating temperature 1300 C. Dimensions of the working chamber: 0.35 x 0.42 m diameter x height. Molybdenum heating chamber. Closed circuit cooling system with a buffer tank Pumping system with a mechanical and turbomolecular pump. Ability to perform processes: • Annealing in high vacuum • Stress relief • Vacuum brazing Ledpjn Snx Hofx Agzsak • Vacuum brazing • etc. The stove is 100% functional after modernization. Sales with installation and commissioning at the customer's place. The final price depends on the scope of modernization, agreed individually with the client. If you have any questions, please contact us.

Condition: excellent (used), Nabertherm N450 ceramic firing kiln, maximum temperature 1280 degrees C. German-made kiln. The kiln is equipped with a very intuitive controller with 6 programs. Lasdpowdzt Hofx Agzjk New spirals have been installed in the kiln, which guarantee the achievement of maximum temperature. Chamber with a capacity of 450 liters. Chamber dimensions: Height 100 cm Width 60 cm Depth 75 cm External dimensions Height 182 cm Width 103 cm Depth 145 cm Power supply 400 V Power 24 kW Maximum temperature 1280 degrees C Kiln in very good condition.

Year of construction: 2008, condition: used, Protective gas conveyor belt furnace Working space: 600 mm wide, 200 mm high Electrical connection values: 3 x 400 volts, 50 hertz, approx. 300 kVA Heating: 10 pcs. Recuperator burner, make WS, connected load 400 kW gross Working temperature: max. 1150° C Heating zones: 5 Belt construction: mesh belt made of high-temperature-resistant steel, width approx. 600 mm Belt speed: adjustable from approx. 100-900 mm / minute Heating muffle: heat-resistant curved construction with bead reinforcements, length: approx. 6.85m, material: 1.4841 Cooling zones: Zone 1 approx. 1.5 m, Zone 2 approx. 4.0m, Zone 3 approx. 4.0m, Zone 4 approx. 3.0m Laedjv Ifzqopfx Agzok Cooling zones made of normal steel sheet (St 37) as double-walled circulation cooling sections with measuring gas extraction nozzle, base plate 8mm thick Protective gas: nitrogen N2, hydrogen H2 Dimensions: working height approx. 1060 mm, heated length (5 zones) approx. 6000 mm, furnace length approx. 6900 mm, loading table approx. 1500 mm, unloading table approx. 1500 mm, total width approx. 2900 mm, total length approx. 30 m The system is available twice (built in 2008 and 2015)

Year of construction: 2010, condition: ready for operation (used), A single-chamber glass tempering furnace (pre-stressing system) Uniglass for the toughening process of safety glass is available. Heating capacity: 690kW, motor power: 870kW, total power: 1570kW, minimum diagonal dimension: 290mm, glass thickness range: 2.85mm–15mm, max. glass dimensions X/Y: 4800mm/1500mm. The ceramic rollers are in poor condition. Documentation available. An on-site inspection is possible. Expected to be available from November 2025. Lajdpfew Igvtox Agzjk

Condition: reconditioned (used), Melting and casting furnace for aluminum and ZnAl. The furnace is after a general renovation, new lining, specialized painted, functional. The furnace capacity for aluminum is approximately 3,000 kg. Suitable for melting with a gas, oxygen or oil burner. Lsdpfxeh Nycas Agzsak

Year of construction: 1999, condition: ready for operation (used), Volume: 1000l, max. temperature: 750°C, heating capacity: 40kW, machine dimensions X/Y/Z: approx. 2500mm/1600mm/1900mm, weight: approx. 2000kg. Documentation available. An on-site inspection is possible. Expected to be available from October/November 2025. Lajdow Emyzepfx Agzsk