Used Angular for sale (973)

Condition: used, machine/vehicle number: 007655, Position 1: Angular Beam Panel Saws HOLZMA + BARGSTEDT-PROFI HKL + TSP Position 2: Panel Stacking and Offloading HOLZMA + BARGSTEDT-PROFI HKL + TSP Position 3: Lift Table HOLZMA + BARGSTEDT-PROFI HKL + TSP Position 4: Lift Table HOLZMA + BARGSTEDT-PROFI HKL + TSP Nledpowuz Irofx Agzsk

Condition: used, length 1000 mm Nedpfxjh Ig Tpj Agzslk width 570 mm height 1200 mm weight of the machine ca. 0,4 t dimensions of the machine ca. 1,x0,6x1,2 m used angle plate in good condition with several bores for clamping.

Condition: good (used), Code: 0272 Brand: STETON Model: TF 5 Working centre for door and window frames Technical data: Nledpfx Aex Itqfegzsk Cut-off saw : Blade diameter mm 400 F30 Blade speed 3000 rpm Pneumatic blade horizontal movement Motor Hp 3 Tenoning shaft: Length 490 mm Motor Hp 10 Speed 3000 rpm Spindle diameter 50 mm Tool diameter 350 mm Spindle vertical movement 450 mm Tenoning carriage: Speed 5/22 m/min Dimensions 350 x 685 mm Workpiece min/max length 320/2600 mm Workpiece min/max width 20/200 mm Workpiece min/max thickness 20/120 mm Profiling side: 1st profiling jumping shaft (chipbreaker) Spindle length 325 mm Spindle diameter 50 mm Motor 5,5 Hp N° 4 positions Max tool diameter 220 mm Main profiling shaft: Length 490 mm Motor 10 Hp Speed 6000 rpm Spindle vertical movement 450 mm Max tool diameter 220 mm Glazing bead unit: Blade diameter 180 mm Spindle diameter 30 mm Speed 6000 rpm Motor 3 Hp Additional trolley Hardware grooving spindle Motor Hp 3 Spindle diameter mm 40 Tool diameter mm 180 Suction mouth diameter mm 120/80 Compressed air 6-7 bar Overall dimensions mm 2300 x 2800 x 1900 h Weight kg 2250

Condition: excellent (used), For panels measuring 5600 x 2600 (2700 mm), thickness from 2 mm to 60 mm N° 2 double-deck infeed roller conveyors, 1 x 6.000 mm long and 1 x approximately 3.800 mm long Hydraulic lifting table (5600 x 2700 mm ca.) System with rubber wheels (11 top + 11 bottom) for panel pressure/feeding Sliding bridge with 45 suction cups and 5 supports (for panel stack alignment) 1st Rear - Pusher, with 11 clamps Rotating table (90° panel rotation) with plastic wheels 1st Panel Saw AH8 580 - Max cutting width mm 5600 (Max blade projection mm 165) Scoring Unit (max. diameter saw / power) mm 200 ca. (Kw 2,2 ca.) Main Sawing Unit (max. diameter saw / power) mm 520 ( Kw 32) Adjustable speed of the saw carriage (m/min) 0 - 150 Sliding crosspiece with 7 pushers for cut panels With 4 supports (for panel stack alignment) and 3 motorized chains Nlsdpfjxvc N Djx Agzjk 2° Rear - pusher, with No. 25 (27) clamps/grippers 2nd Panel Saw - Max cutting width mm 2700 (Max blade projection mm 165) Scoring Unit (max. diameter saw / power) mm 200 ca. (Kw 2,2 ca.) Main Sawing Unit (max. diameter saw / power) mm 520 (Kw 32) Adjustable speed of the saw carriage (m/min) 0 - 150 Waste evacuation system with grinder VECOPLAN (Kw 55) Plastic wheels coated table for cut panel output Stacking system for cut panels with N° 2 front support tables with air blowing system 400 x 6300 mm + N° 8 lifting tables (4 are 1300 x 1600 mm and 4 are 1300 x 1410 mm) - Total power KVA 130

Condition: excellent (used), functionality: fully functional, machine/vehicle number: Typ: 2034 Nr. 374, spindle mount: MK 2, Angular milling spindle for Deckel FP1 and FP2, D70, D80 mm, for Deckel milling machines FP1 and FP2. The angular milling spindle is rotatable 360 degrees. The angular milling spindle is used. The spindle is in very good condition. This is an original Deckel angular milling spindle, Type: 2034, No. 374. The spindle has only been used by us for precision work. Technical data of the angular milling spindle: Tool milling spindle with MK2 (Morse taper 2) tool holder, for collets: Morse taper 2 with internal thread. The spindle is supplied with a reducing sleeve. Reducing sleeve: (reducing sleeve for FP1) Outside diameter = 80 mm Inside diameter = 70 mm (A reducing sleeve is not required for FP2) Weight: Weight 6.5 kg (tool milling spindle) Weight 0.8 kg (reducing sleeve) Total weight 7.3 kg Price: Ex works Payment: Cash on collection, or payment in advance. Delivery: Nlsdpfx Ajxk T Hisgzsk Shipping by DHL parcel service is possible. Self-collection is possible. Terms of delivery: We deliver according to the Machineseeker standard contract, Standard purchase contract for used machinery from Machineseeker. A standard contract can be downloaded from Machineseeker. Delivery time: Available immediately.

Condition: used, Year of construction: 2005, functionality: fully functional, length stop: 3,200 mm, tool diameter: 400 mm, spindle diameter: 50 mm, spindle stroke: 640 mm, spindle speed (max.): 3,000 rpm, milling spindle length: 320 mm, saw blade diameter: 400 mm, height adjustment type: electric, type of input current: AC, working height: 130 mm, working width: 200 mm, SCM Windor 60/100 – Angle Processing Center Manufacturer: SCM Group Year of manufacture: 2005* 1. General Description of the System The system in question is a window and door production line of the type Windor 60/100 from the manufacturer SCM Group, built in 2005. It is a CNC-controlled angle processing center designed for the industrial machining of frame and sash components. The system is configured for series production and enables precise, repeatable machining in integrated process steps. 2. Main Components of the System Nlodpfxex Nqqxo Agzsk 2.1 SCM Windor 60/100 Angle Processing Center The SCM Windor 60/100 features a modular design and is configured as an angle processing unit. Machining takes place on a tenoning side and a profiling side positioned at right angles to each other. The system combines several machining steps – such as milling, drilling, grooving, rebating, and tenoning – in a fully integrated, CNC-controlled process. Key Features: * CNC multi-sided machining * Multiple milling and processing spindles * Automated tool handling and changeover * High dimensional accuracy and repeatability 2.2 Fleximat Drilling Center The Fleximat drilling center is integrated into the system and is used for the precise execution of boreholes for joints and fittings. Machining is CNC-controlled with both vertical and horizontal drilling units. 2.3 Profiler Center The profiler center is designed for contour-forming milling operations and consists of two processing sides: Right side: * Lifting spindle with height adjustment * Suitable for variable profile and contour processing Left side: * 24-position tool changer * Automatic tool changing to minimize setup times * Suitable for complex profile milling 2.4 Löwer Surface Sanding Machine A surface sanding machine from Löwer is integrated into the production line. The machine is used exclusively for surface sanding, serving to improve the surface quality of the processed workpieces. 3. Control, Operation, and Safety The system is equipped with a CNC control unit that manages all machining operations, tool changes, as well as feed and spindle movements. Operation is semi- or fully-automated by trained personnel. The safety features are state-of-the-art as of the time of construction (2005) and include, in particular: * Mechanical guards and enclosures * Emergency stop devices * Safety locks on moving machine parts 4. Optional Expansion: SCM Topset XL Planer (10-spindle) For expansion of the existing machinery, provision has been made for a SCM Topset XL planer with 10 spindles. This machine will be operated as a standalone processing station at a separate location within the production hall and is not directly integrated into the CNC control of the Windor system. The system is available and can be dismantled at any time. Dismantling and transportation are to be organized by the buyer. Available from 07.01.2026

Condition: used, machine/vehicle number: 005445, Max. panel width: 3200 mm Max. panel length: 2120 mm Main saw blade projection: 165 mm No of Rip saw Grippers: 4 No of Cross Cut Grippers: 9 Nedpfx Aeiiiuysgzelk Panel Rotation Station: yes Thin sheet loading: yes

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, Weinig Unicontrol 10 Year of manufacture: 1996 Technical condition: Very good Description: The Weinig Unicontrol 10 is a CNC automatic machine designed for planing and profiling wooden elements, particularly used in the production of windows and doors. It combines the functions of four-sided planing and precise profiling. Nodpswbikbefx Agzelk Main features: ✅ Automatic adjustment of spindles and guides using a CNC system ✅ Very high machining precision – ideal for serial production ✅ Fast machine setup thanks to profile setting memory ✅ Robust and durable frame construction ✅ Suitable for working with various types of wood – both soft and hard Included in the set: Weinig Univar 6, year of manufacture: 1996, in very good condition.

Condition: good (used), Year of construction: 2007, functionality: fully functional, conveyor belt length: 3,500 mm, conveyor belt width: 285 mm, conveyor belt speed: 40 mm/s, total length: 3,000 mm, total width: 420 mm, total height: 2,540 mm, overall weight: 120 kg, discharge height: 2,480 mm, motor manufacturer: Panasonic, TAF item number: 1000005843 Manufacturer: DynaCon Year of manufacture: 2007 Overall dimensions (LxWxH) in mm: 3,000 x 420 x 2,540 Width incl. side panel in mm: 330 Width incl. drive in mm: 400 Side height in mm: 250 Total conveyor length in mm: 3,500 Conveyor length, horizontal in mm: 1,000 Conveyor length, vertical in mm: 2,500 Conveyor width in mm: 285 Belt type: Plastic slats / link chain belt Belt width in mm: 295 Cleats (cleat height/cleat pitch) in mm: 50 / 300 Substructure: rollable / height-adjustable Sliding surface: steel Inlet height in mm: max: 280 min: 200 Outlet height in mm: max: 2,480 min: 2,400 Drive: drum drive Motor type: Panasonic Motor data: 400 V, 50 Hz, 0.3 A, 30 W Conveyor speed in m/s: 0.04 Net weight in kg: 120 Special features: incl. outlet hopper and cycle control Condition: used / fully functional Function test: OK Nljdpfxjx Dm S Ee Agzok

Condition: excellent (used), Year of construction: 2021, Angular sawing plant Numerical Control PowerControl V2.1 - CADmatic 5 (Tapio ready) No. 1 Rollers table for pre-loading (useful mm 2200 x 4500 approx) Lifting table (mm) 4300 x 2200 1st Rear-pusher, with No. 4 clamps/grippers 1st Panel Saw - Max cutting width mm 4300 Max blade projection (mm) 125 Scoring Unit (max. diameter saw / power) mm 180 (Kw 2,2) Main Sawing Unit (max. diameter saw / power) mm 450 (Kw 28) Adjustable speed of the saw carriage (m/min) 1 - 150 m/min Nodpfx Aex Aqdcogzjlk 2nd Rear-pusher, with No. 8 clamps/grippers 2nd Panel Saw - Max cutting width mm 2200 Max blade projection (mm) 125 Scoring Unit (max. diameter saw / power) mm 180 (Kw 2,2) Main Sawing Unit (max. diameter saw / power) mm 450 (Kw 28) Adjustable speed of the saw carriage (m/min) 1 - 150 m/min No. 2 Front supporting tables with Air blowing system (2 x mm 800 x 2810) Total installed power A 102 OPTION: No. 1 Waste grinder

Condition: used, length 800 mm width 500 mm height 1000 mm Njdpfjtv Icujx Agzolk weight of the machine ca. 1,1 t 2 units - Weight approx. 550 kg/each

Condition: used, Synchronous servomotor with holding brake and gearbox, geared motor, electric motor, angular geared motor Motor: Manufacturer: LUST LTI DRIVES Type: LSK-190-7-30-560 T1,P,KK,1R Order No.: 716090 Art. No.: 0970.8016 Machine type: Permanently excited synchronous servo motor DC link voltage of the controller Uzk: 560 VDC Rated power: 14.51 kw Rated speed: 3000 rpm Rated torque Mn: 46.2 Nm Nledpfof Dlzusx Agzek Standstill torque M0: 83.4 Nm Rated current In: 31.5 A Standstill current I0 / I0max: 54.9 / 219.6 A Pole pairs: 3 Shaft diameter: 32 mm Shaft length 50 mm - Shaft journal with key and keyway DIN 6885 / A10x8x50 - Option 1R Resolver 1-pole pair - Option KK Terminal box - Option T1 (DIN-PTC double base insulated) - Power connection 8-pin junction box - Resolver connection 12-pin junction box Holding brake: Manufacturer: LUST LTI DRIVES Type: NFH10-H/BA Order no.: 718690 Art. No: Rated voltage: 24 VDC Rated current: 4.5 A Rated power: 108 W Braking torque: 65 Nm Angular gearbox WESTFALIA Systemtechnik Hollow shaft output: internal Ø 65 mm Hollow shaft length: approx. 280 mm Gearbox output speed: max 450 rpm Speed gearbox input: max 4500 rpm. Transmission ratio: 10:1 - Shaft journals also ground on the outside - Gearbox can be mounted on two flange surfaces - Mounting hole on gearbox 180 x 180 mm / 180 x 230 mm Overall dimensions L x W x H: 1110 x 250 x 350 mm Total weight: 180 kg good condition

Condition: used, machine/vehicle number: 005456, Max. panel width: 2200 mm Max. panel length: 4500 mm Main saw blade projection: 123 mm No of Rip saw Grippers: 8 No of Cross Cut Grippers: 5 Second flexible pusher: yes Panel Rotation Station: yes Nlodpowuz Dysfx Agzjk

Condition: used, Year of construction: 1990, length 3300 mm width 1800 mm height 1800 mm Nledpfx Agswm Rp Aszek weight of the machine ca. 3,2 t

Condition: good (used), Year of construction: 2007, functionality: fully functional, conveyor belt length: 3,220 mm, conveyor belt width: 280 mm, conveyor belt speed: 100 mm/s, total length: 2,400 mm, total width: 440 mm, total height: 2,200 mm, overall weight: 100 kg, discharge height: 2,090 mm, TAF item number: 1000005820 Manufacturer: Fimatech Nledpjx Dm Itefx Agzok Year of manufacture: 2007 Overall dimensions (LxWxH) in mm: 2,400 x 440 x 2,200 Width incl. side panel in mm: 330 Width incl. drive in mm: 380 Side height in mm: 250 Total conveyor length in mm: 3,220 Conveyor length, horizontal in mm: 1,100 Conveyor length, vertical in mm: 2,120 Conveyor width in mm: 280 Belt type: Plastic slats / link chain belt Belt width in mm: 300 Cleats (cleat height/cleat pitch) in mm: 50 / 350 Substructure: rollable / height-adjustable Sliding surface: steel Inlet height in mm: max: 320 min: 270 Outlet height in mm: max: 2,090 min: 2,040 Drive: head drive Motor type: Panasonic drum motor Motor data: 50 Hz / 400 KW, 0.12 A Conveyor speed in m/s: 0.1 Net weight in kg: 100 Special features: incl. cycle control Condition: used / fully functional Function test: OK

Condition: excellent (used), Numerical Control Power Control + Software Cadmatic 4 Professional N° 1 Infeed roller tracks (ca.) 18,000 mm + (OPTIONAL: Infeeder with chains) Lifting table (mm) 5600 x 2200 VAC loader (sliding bridge) with fan suction for loading special or delicate panels 1° Rear-pusher, with No. 6 clamps/grippers Turning device (rotating unit) at 90° 1° Panel Saw - Max cutting width mm 5600 (cutting line with air cushion) Max blade projection (mm) 170 Scoring Unit (max. diameter saw / power) mm 200 (Kw 2,2) Main Sawing Unit (max. diameter saw / power) mm 570 ( Kw 30) Adjustable speed of the saw carriage (QS) (m/min) 1 - 150 m/min 2° Rear-pusher, with No. 7 (+1) clamps/grippers 2° Panel Saw - Max cutting width mm 2200 (cutting line with air cushion) Max blade projection (mm) 170 Scoring Unit (max. diameter saw / power) mm 200 (Kw 2,2) Main Sawing Unit (max. diameter saw / power) mm 570 (Kw 30) Adjustable speed of the saw carriage (QS) (m/min) 1 - 150 m/min Waste evacuation system with grinder (Kw 19.5) Nodpfx Aef Nkv Sjgzslk No. 2 Front supporting tables with Air blowing system (mm 800 x 2160) Plastic wheels coated with special material to avoid scratching delicate panels Automatic unloading System of the cut panels (N° 2 roller conveyors) Typ 68/20 and Typ 58/24 + N° 3 tables with motorised belts: 2 x Typ 255/56/2 and 1 x Typ 27/56) Total power Kw 110 ca.

Condition: good (used), Year of construction: 2007, Technical characteristics : - Max machinable length 3200 mm - Minimum machinable length 200 mm - Maximum width 200 mm - Minimum width 40 mm - Maximum workpiece height 130 mm - Depth with max Ø to tenon 320 mm: 105 mm - Tenoning carriage speed min / max 0/100 m / min - Min / max profiling speed: 3/15 m / min Tenoning: 1- end cut saw 5.5 hp (4 kW) Saw Ø 400 mm 2- tenoning router Counter bearing 50 x 620 mm 15 hp (11.3 kW) Max tool Ø 320 mm Axle stroke 575 mm Automatic splinter guard 3- tenoning router Counter bearing 50 x 620 mm 15 hp (11.3 kW) Max tool Ø 320 mm Axle stroke 575 mm Automatic splinter guard Vertical positioning with continuous axis 4- Digital angular adjustment clamp Profiling: 5-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tools 130/240 mm Axle stroke 280 mm Time-delayed anti-shattering intervention during calibration Double direction of rotation Vertical and horizontal positioning with continuous axis 6-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tool 130/240 mm Axle stroke 280 mm Vertical and horizontal positioning with continuous axis 7-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tool 130/240 mm Vertical and horizontal positioning with continuous axis Nlodpfx Aot R T Hcegzsk 8-: close-out recovery group Vertical and horizontal positioning with continuous axis Device for extracting the shutter 9-: lower horizontal shaft for groove Vertical and horizontal positioning with continuous axis 88.5 hp (66.4kW) 10-: digital guide 11-: Return of parts to the operator NO TOOLS AVAILABLE OBTAIN ADDITIONAL PHOTOS NOTE: SUBJECT TO CHANGES IN TECHNICAL DATA

Condition: used, Synchronous servo motor with holding brake and gear, Geared motor, electric motor, angular gear motor Engine: Manufacturer: LUST LTI DRIVES Type: LSK-190-4-30-560 T1,P,KK,1R Order no.: 716090 Art. No.: 0970.8015 Machine type: Permanently excited synchronous servo motor DC link voltage of the controller Uzk: 560 VDC Nominal power: 12,13 kw Nominal speed: 3000 rpm Nominal torque Mn: 38,6 Nm Standstill torque M0: 61.5 Nm Rated current In: 26.6 A Standstill current I0 / I0max: 41 / 164 A Pole pairs: 3 shaft diameter: 32 mm Wavelength 50 mm - Shaft journal with keyway and keyway DIN 6885 / A10x8x50 - Option 1R Resolver 1 pole pair - Option KK Terminal box - Option T1 (DIN-PTC double basic insulation) - Power connection 8-pole junction box Nlsdpfef Dlzqjx Agzek - Resolver connection 12-pole junction box Holding brake: Manufacturer: LUST LTI DRIVES Type: NFH10-H/BA Order no.: 717173 Art. No.: 228-00043 Nominal voltage: 24 VDC Rated current: 4.5 A Nominal power: 108 W Braking torque: 160 Nm Angular gearboxes WESTFALIA Systemtechnik Shaft journal output: Ø 60 mm with feather key Shaft journal Length: approx. 120 mm Gearbox output speed: max 450 rpm. Gearbox input speed: max 4500 rpm. Transmission ratio: 10:1 - Gearbox can be mounted on two flange surfaces - Mounting hole on gear unit 180 x 180 mm / 180 x 230 mm - Transmission with 3-fold sprocket outer diameter: 147 mm, number of teeth: 17 Overall dimensions L x W x H: 1020 x 250 x 350 mm total weight: 175 kg sound condition 2 pieces available, price per piece [...]

Condition: used, machine/vehicle number: 007504, Position 1: Vertical Storage Systems IMA + SCHELLING-AH 6 Position 2: Angular Beam Panel Saws IMA + SCHELLING-AH 6 Position 3: Panel Feeding and Loading IMA + SCHELLING-AH 6 Nodpfxswuucis Agzolk

Condition: used, Technical details: table length: 400 mm table width: 225 mm width:: 400 Nsdpfx Ajwb D H Dogzjlk depth: 225 mm height: 300 mm dimension L-W-H: 400 x 225 x 300 mm weight: ca. 34 / Winkel kg 2 pieces available (price per piece) with slotted holes Material made of cast steel Surface finished *

Condition: good (used), functionality: fully functional, conveyor belt length: 4,000 mm, conveyor belt width: 280 mm, conveyor belt speed: 80 mm/s, total length: 3,400 mm, total width: 650 mm, total height: 2,450 mm, overall weight: 150 kg, discharge height: 2,450 mm, motor manufacturer: Panasonic, TAF item number: 1000005844 Manufacturer: DynaCon Year of manufacture: unknown Overall dimensions (LxWxH) in mm: 3,400 x 650 x 2,450 Width incl. side panel in mm: 380 Width incl. drive in mm: 600 Nedpfoxy R R Rjx Agzslk Side panel height in mm: with side guide: 300 / without: 200 Conveyor length, total in mm: 4,000 Conveyor length, horizontal in mm: 1,000 Conveyor length, vertical in mm: 3,000 Conveyor width in mm: 280 Belt type: plastic slats / link chain belt Belt width in mm: 300 Cleats (cleat height/cleat pitch) in mm: 50 / 460 Substructure: rollable / height-adjustable Sliding surface: steel Inlet height in mm: max: 330 min: 280 Outlet height in mm: max: 2,450 min: 2,400 Drive: head drive Motor type: Panasonic gear motor Motor data: 50 Hz, 400 V, 0.30 A Conveyor speed in m/s: 0.08 Net weight in kg: 150 Special features: programmed cycle control Condition: used / fully functional Function test: OK

Condition: excellent (used), For panels measuring 5600 x 2600 (2700 mm), thickness from 2 mm to 60 mm N° 2 double-deck infeed roller conveyors, 1 x 6.000 mm long and 1 x approximately 3.800 mm long Hydraulic lifting table (5600 x 2700 mm ca.) System with rubber wheels (11 top + 11 bottom) for panel pressure/feeding Sliding bridge with 45 suction cups and 5 supports (for panel stack alignment) 1st Rear - Pusher, with 11 clamps Rotating table (90° panel rotation) with plastic wheels 1st Panel Saw AH8 580 - Max cutting width mm 5600 (Max blade projection mm 165) Scoring Unit (max. diameter saw / power) mm 200 ca. (Kw 2,2 ca.) Main Sawing Unit (max. diameter saw / power) mm 520 ( Kw 32) Adjustable speed of the saw carriage (m/min) 0 - 150 Sliding crosspiece with 7 pushers for cut panels Nodpfxoxvc Rzs Agzjlk With 4 supports (for panel stack alignment) and 3 motorized chains 2° Rear - pusher, with No. 25 (27) clamps/grippers 2nd Panel Saw - Max cutting width mm 2700 (Max blade projection mm 165) Scoring Unit (max. diameter saw / power) mm 200 ca. (Kw 2,2 ca.) Main Sawing Unit (max. diameter saw / power) mm 520 (Kw 32) Adjustable speed of the saw carriage (m/min) 0 - 150 Waste evacuation system with grinder VECOPLAN (Kw 55) Plastic wheels coated table for cut panel output Stacking system for cut panels with N° 2 front support tables with air blowing system 400 x 6300 mm + N° 8 lifting tables (4 are 1300 x 1600 mm and 4 are 1300 x 1410 mm) - Total power KVA 130

Condition: excellent (used), Numerical Control Power Control + Software Cadmatic 4 Professional No. 1 Infeed roller tracks (ca.) 32,000 mm Lifting table (mm) 5600 x 2200 VAC loader (sliding bridge) with fan suction for loading special or delicate panels 1° Rear-pusher, with No. 6 clamps/grippers Turning device (rotating unit) at 90° 1° Panel Saw - Max cutting width mm 5600 (cutting line with air cushion) Max blade projection (mm) 190 Scoring Unit (max. diameter saw / power) mm 200 (Kw 2,2) Main Sawing Unit (max. diameter saw / power) mm 600 ( Kw 36) Adjustable speed of the saw carriage (QS) (m/min) 1 - 130 m/min 2° Rear-pusher, with No. 14 clamps/grippers 2° Panel Saw - Max cutting width mm 2200 (cutting line with air cushion) Nlodpfx Asvnq H Ejgzek Max blade projection (mm) 190 Scoring Unit (max. diameter saw / power) mm 200 (Kw 2,2) Main Sawing Unit (max. diameter saw / power) mm 600 (Kw 36) Adjustable speed of the saw carriage (QS) (m/min) 1 - 130 m/min Waste evacuation system with grinder (Kw 19.5) No. 2 Front supporting tables with Air blowing system (mm 800 x 2160) Plastic wheels coated with special material to avoid scratching delicate panels Automatic unloading System of the cut panels: N° 2 x Liftomat HAU-A 25/12 Automatic Stacking System with 8 stations

Condition: excellent (used), Angular sawing plant Nsdpfx Aepuh Dkogzolk Numerical Control Cadmatic 4 professional Rollers table for pre-loading No. 1 (mm 2200 x 4400) Lifting table (mm) 2200 x 4300 1st Rear pusher, with clamps No. 4 1st Panel Saw Max cutting width (mm) 4300 Max blade projection (mm) 125 Scoring Unit (max. diameter saw / power) mm 180 (Kw 2,2) Main Sawing Unit (max. diameter saw / power) mm 450 (Kw 18) Adjustable speed of the saw carriage (m/min) 0-150 2nd Rear pusher, with clamps No. 8 2nd Panel saw Max cutting width (mm) 2200 Max blade projection (mm) 125 Scoring Unit (max. diameter saw / power) mm 180 (Kw 2,2) Main Sawing Unit (max. diameter saw / power) mm 450 (Kw 18) Adjustable speed of the saw carriage (m/min) 0-150 Front supporting tables with Air blowing system No. 2 With extra long air blowing table to facilitare the evacuation of the cut panels Total power Kw 52.6

Condition: excellent (used), Angular sawing plant Nodpfxoukhd Aj Agzjlk Numerical Control OSI Plus - Software Optiplanning N. 2 Pre-loading roller tables (mm) approx. 4500 x 2200 each Lifting table (mm) 4500 x 2200 1° Rear-pusher, with No. 5 clamps/grippers Turning device (rotating unit) at 90° 1° Panel saw (longitudinal) max. cutting width (mm) 4500 Max blade projection (mm) 152 Scoring Unit (max. diameter saw) mm approx. 215 Main Sawing Unit (max. diameter saw / power) mm 530 ( Kw 30) Adjustable speed of the saw carriage (m/min) 1 - 170 m/min Cutter for shredding trimmings 2° Rear-pusher, with No. 10 clamps/grippers 2° Panel Saw - Max cutting width mm 2200 Max blade projection (mm) 152 Scoring Unit (max. diameter saw) mm approx. 215 Main Sawing Unit (max. diameter saw / power) mm 530 (Kw 30) Adjustable speed of the saw carriage (m/min) 1 - 170 m/min No. 2 Front supporting tables with Air blowing system mm 2200 x 1500 Automatic unloader (bridge) for cut panels "RBO (BIESSE)" Mod. Lifter with 6 stacking stations