Used Mc for sale (1,794)

Condition: new, total length: 6,430 mm, Year of construction: 2026, load capacity: 15,000 kg, Crane JMG MC 100.08 Drive Electric Year built 2026 Lodpfxoyvk Nbj Abnoac Lifting weight (kg) 15,000

Condition: new, Year of construction: 2026, load capacity: 25,000 kg, lifting height: 2,470 mm, total length: 6,520 mm, - Ladegerät Hersteller: Zivan - Model: Battery Charger NG9 - Input: 400V, 12A, 50-60Hz - Output: 96V, 80A - hintere Hintergruppe mit zwei unabhängig voneinander drehenden Gruppen - Vorderachsenantrieb mit gegenläufiger Bewegung - großer Freihubmast - Abnehmbare Kontergewichte - Ausfahrbare Hintergruppe: 7720 mm - Max Tragfähigkeit Gabel mit offener Hintergruppe: 25t@0.9m - Max Tragfähigkeit Gabel mit geschlossener Hintergruppe: 16.5t@0.9m - Antrieb: Vorderachser Antrieb mit gegenläufiger Bewegung N°2 Elektromotoren AC 12 kW 96V - Gesamtgewicht mit Gabeln Kg. 25.000 - Gesamtgewicht mit Ausleger Kg. 25.000 - Gabelhalterung und Gabelzahn: 3.000 kg - Gewicht vom Kranmast: 3.000 kg - Gewicht von den abnehmbaren Kontergewichten : 6.000 Laodey Eh N Rjpfx Abnsc - Batterie: 96 V - 1050 Ah - Betriebsbremse: hydraulisch mit Fußsteuerung - Park- und Notbremse: hydraulisch mit automatischer Steuerung - Lenkung: über die Hinterachse - Park- und Notbremse: hydraulisch mit automatischer Steuerung - Auslegerwinkel vom Mast+12°/-7° - Motor: N° 1 Elektropumpe AC 35kW 96V

Condition: used, Year of construction: 2008, turning diameter max. 420 mm turning length 713 mm control MSX 850 III MAPPS Mitsubishi swing over bed 995 mm Swing dia. over traverse guideway 825 mm max. turning diameter 420 mm max. bar capacity 90 mm turning speed range - main spindle max. 3.000 min/-1 power capacity - main spindel 30 / 25 kW spindle nose JIS A2-8 spindle bearing diameter 160 mm spindle bore 105 mm max. bar capacity 90 mm C-Axis 0,001 ° x-axis 280 mm z-axis 820 mm Tooling 12 Pos. Schank height for square tool 25 mm Diameter of boring bar 50 mm turret change time 0,3 sec. Spindle speed - driven tool stations max. 6.000 min -1 power capacity driven tool-stations 5,5 / 3,7 kW rapid traverse X-axis 30 m/min rapid traverse Z-axis 30 m/min rapid traverse C-axis 300 min/-1 tailstock 734 mm diameter of quill 110 mm taper of center MK 5 total power requirement 46 kVA Lodpozb N Ulofx Abnsac weight of the machine ca. 6,0 t dimensions of the machine ca. 5,0 x 3,0 x 2,5 m CNC - Turning- and Milling Center MORI SEIKI - NL 3000 MC / 700 - Operating time: approx. 9,595 hours - Processing time: approx. 7,552 hours - WITHOUT extraction system

Condition: used, total length: 4,500 mm, Year of construction: 2023, load capacity: 13,000 kg, - Antrieb: Vorderachse über zwei 8,5 kW 80V AC Elektromotoren, Isolationsklasse H. - Batterie: 80V – 900 Ah mit Lade- und Batteriefüllstandsanzeige. Arbeitszeit bis zu 8 reinen Kranstunden. Laodpfx Abjzb Rk Iensc - Bremsen: Automatisches Bremssystem wirkend auf alle Räder. - Rahmen: Gefertigt aus soliden Formteilen und verschweißten Qualitätsstahlplatten. - Reifen: Vorne no. 4 superelastisch 300x15” Hinten no. 2 superelastisch 200x15” - Ausleger: Gefertigt aus soliden Formteilen und verschweißten Qualitätsstahlplatten, Aufgebaut in 4 vollhydraulischen Teleskop-Elementen. Auslegerwinkel: +65°/-5°. - Hydrauliksystem: Angetrieben durch leise Zahnradpumpe (19kW), Isolationsklasse H - Hydraulikbedienung über Joystick und Hebel an der Funkfernsteuerung - Filter und Sicherheitsventile - maximaler Betriebsdruck 22MPa. - Lenkung: Über Hinterachse mit Elektromotor. Lenkeinschlag +90°/-90°. - Motorpumpe: Elektromotor 19kW 80 V AC, Isolationsklasse H. - L.M.I.: Elektronische Lastbegrenzung “CE Standard” - Mit Sicherheitsleuchten und folgenden Displayanzeigen: Angehobene Last, Maximal zu hebende Last, Prozentuelle Lastanzeige, Arbeitsradius, Auslegerwinkel, Gewähltes Programm. - Eigengewicht: 14.000 KG davon 4000 KG abnehmbares Kontergewicht. - Abnehmbare Kontergewichte: Entwickelt für schnelle De- und Remontage, um jederzeit die Boden- und Achsbelastungen zu optimieren. - Funkfernbedienung: Auf alle Kran- und Auslegerbewegungen. Falls vorhanden auch Bewegungen von hydraulischen Anbauteilen. - Kran Klassifizierung nach UNI ISO 4301 - 1: A3

Condition: excellent (used), Year of construction: 2007, Control: Siemens 840D powerline Travel paths X/Y/Z: 630/630/630 mm 2-fold pallet changer Spindle speed: 10,000 rpm Knoll coolant system with paper band filter Tool holder: SK40 Tool magazine with 80 stations Lodpfx Abozb R I Tonsac

Condition: reconditioned (used), Year of construction: 2017, operating hours: 12,270 h, functionality: fully functional, turning diameter: 150 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 100 mm, travel distance Z-axis: 220 mm, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, type of input current: three-phase, overall weight: 5,700 kg, spindle nose: JIS A2-5, input voltage: 400 V, number of driven tool stations in tool turret 1: 10, number of tool stations in tool turret 2: 10, CNC Lathe DMG MORI NRX2000 MC TECHNICAL CHARACTERISTICS: Year of manufacturing: 2017 CNC control: MITSUBISHI M730UM Max. turning diameter: 150 [mm] Stroke X axis: 100 [mm] Stroke Z axis: 220 [mm] Rapid traverse rate X1 axis: 30000 [mm/min] Rapid traverse rate X2 axis: 30000 [mm/min] Rapid traverse rate Z1 axis: 30000 [mm/min] Rapid traverse rate Z2 axis: 30000 [mm/min] Spindle nose: JIS A2-5 Max. machining length spindle 1: 100 [mm] Max. machining length spindle 2: 100 [mm] Max. spindle speed - Spindle 1: 6000 [rpm] Max. spindle speed - Spindle 2: 6000 [rpm] Live tools power - Turret 1: 1.5 [kW] Live tools power - Turret 2: 1.2 [kW] Number of tool stations - Turret 1: 10 Max. speed driven tools - Turret 1: 10000 [rpm] Number of tool stations - Turret 2: 10 Laodpfx Ajyzgc Usbnsc Max. speed driven tools - Turret 2: 10000 [rpm] Total power required: 38 [kVA] Supply voltage: 400 [V] Working hours: 12270 [h] Weight: 5700 [Kg] INCLUDED EQUIPMENT: x1 gantry loader x2 workstockers (left + right) for raw materials and finished workpieces x1 RENISHAW workpiece touch probe, type RLP40 (NEW) x1 drill bit breakage detection sensor (for turret N°1) x19 static tool holders x4 axial driven tool holders x2 KITAGAWA collet chucks, type KLAMP DKF65 x2 three-jaw chucks x1 status indicator lamp x1 coolant gun x2 remote electronic handwheels (Jogwheels) x1 oil mist extraction unit x1 chip conveyor x1 high-pressure coolant unit, 35 [bar] x1 SIEBEC cutting fluid filtration unit type MP52D-AP18 x1 set of grippers for the gantry loader x1 set of axle clamping brackets for machine transport x1 complete set of manuals (users manual, programming manual, electrical diagrams, gantry loader manual...) Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Machine tool similar to a mill-turn center, machining center, and milling machine, and to brands such as Schaublin, Index, Mori Seiki, Traub, Tsugami, Star, Tornos, Biglia, Nakamura, Miyano, DMG, Mazak. CNC lathe, NC lathe, digital lathe, machining center, NC milling machine, CNC milling machine, digital milling machine, Fanuc, iTNC, TNC, Heidenhain, Mori Seiki, Mazak, Hurco, Nakamura, Takamura, Hardinge.

Condition: good (used), Year of construction: 1994, Manufacturer FRAMAR – Italy Vertical machining: 0 - 180 mm Ledpfx Absyxx A Ienjac Cross travel: 0 - 150 mm Longitudinal stroke: 0 - 270 mm Table size: 540 / 110 mm Vertical table travel: 0 - 90 mm Work table tilt: 0 – 45 degrees Milling unit angle adjustment: 0 – 45 degrees Maximum door width: 950 mm Motor power: 1.5 kW Operating speed: 2800 rpm Location: in stock at 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, neu 2025 010105 prompt, Zwischenverkauf v Bulgarien 50210 € 948.97 € 1 600 mm 2000 mm 0 mm 80 mm 400 mm 400 mm 8 90 MK 21 20 - 2000 1/min 120 0.04 - 12 mm/U 0.02 - 6 mm/U 64 0.5 - 120 mm 60 - 1/4 Gänge/" 315 mm 1 mm 90 mm 5 MK 2 mm 7.5 kW Ljdpfx Ajwiqz Djbnsac 3600 mm 1250 mm 1400 mm 3110 kg driven by conventional gearbox 3-axes digital readout Fagor 40i quick change toolpostAmestra Multisuisse type C with 4 holders (3 square, 1 round) 3-jaw chuck Bison3204/DIN6350, Ø 250 mm spindle dead center four way rapid traverse device electromagnetic brake longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS (PRICES ON REQUEST): turning length 1.000 mm turning length 1.500 mm turning length 3.000 mm turning length 4.000 mm turning length 5.000 mm

Condition: like new (used), functionality: fully functional, power: 20 kW (27.19 HP), gearing type: hydrostat, fuel type: electric, color: blue, overall weight: 13,700 kg, empty load weight: 13,700 kg, operation weight: 13,700 kg, lifting power: 11,000 kg/m, lifting height: 10,000 mm, tire size: Voor 315×70-15 | Achter 250×70-15, tire condition: 90 %, axle configuration: 4x2, number of seats: 1, first registration: 02/2014, mast type: telescopic, Year of construction: 2014, operating hours: 286 h, Equipment: adjustable boom, crane, hydraulics, === MAIN SPECIFICATIONS === Year of manufacture: 2014 Operating hours: 286 h Max. lifting capacity: 11,000 kg Total weight: 13,700 kg Power: 2 × 10 kW (80V electric motors) Drive type: Electric (battery 80V – 830Ah) Transmission: Front axle via gear reducer Steering system: Rear-wheel steering, hydraulic with load-sensing system Boom: Hydraulic telescopic boom (2 sections) Max. boom angle up: +60° Max. boom angle down: −10° Drive system: Electric with electronic speed control (MOSFET type) Tyres: Front: 4 × 315×70-15 | Rear: 2 × 250×70-15 (non-marking) Brakes: Hydraulic service brake, automatic parking brake Hydraulic system: Gear pump, 22 MPa maximum pressure CE certification: Yes (2006/42/CE – 2004/108/CE) Country of origin: Italy Lodpfxsxn Sm Ao Abnoac === HIGHLIGHTS === Carefully selected from reliable sources with verifiable history CE certification and full documentation included Ready for immediate transport and use Fully electric drive – zero emissions Hydraulic telescopic boom with two extensions Non-marking tyres, suitable for indoor use Includes hydraulic winch, enclosed cab, and working lights === CONDITION === Excellent condition – only 286 working hours. Crane fully tested and ready for immediate use. Available from stock. === LOCATION & DELIVERY === Located in Sittard, Netherlands. Worldwide delivery available. Price €89.999 (EXW / excl. VAT). The JMG MC 110 is a powerful electric industrial crane with a lifting capacity of 11 tons and a high-strength telescopic boom. Thanks to its electric drive, compact size, and non-marking tyres, this machine is ideal for use in production halls, warehouses, and maintenance environments. The MC 110 combines precision, safety, and zero emissions — a reliable solution for indoor lifting operations. === DELIVERY === Crane loading available on request for smooth handling during shipment. Flexible delivery options tailored to your destination and logistics preferences. All shipments are professionally handled by the logistics team of Collé Rental & Sales.

Condition: ready for operation (used), Year of construction: 2001, spindle speed (max.): 4,000 rpm, travel distance X-axis: 180 mm, travel distance Z-axis: 930 mm, spindle motor power: 15,000 W, total height: 2,100 mm, overall weight: 10,400 kg, controller manufacturer: FANUC, controller model: 18i, number of axes: 7, This Muratec MT 25 MC Lathe was manufactured in the year 2001 in Japan. It is equipped with a Fanuc 18i CNC control unit and has 7 axis. The machine has a spindle speed of 40-4000 rpm. Additional equipment Ljdpfx Abex D N I Aenoac • Bar loader multifeed, maximum bar length 1.5 meters. Machine Benefits Qualitative Machine Benefits • Tailstock does not have but the second spindle has torque control and can perform the torque control and can perform tailstock function. Technical Machine Benefits • Maximum chuck size: 254 mm • Max. Turning length 300 mm • Max. Turning diameter 380 mm • Length between centers 920 mm • Spindle nose a2-6 • Spindle inside diameter 67 mm • Max. Turning diameter x in manual 340 mm • Max. Turning length z in manual 920 mm • Max. Turning diameter x in automatic 340 mm • Max. Latheable length z in auto 920 mm Dimensions Machine Depth 2300 mm

Condition: good (used), Year of construction: 1999, machine/vehicle number: 165236.1, Offer 25418 Technical data: - Pressing force approx. 110 kN - Working stroke approx. 50 mm Lasdpfx Aszfh Hysbnsc - Force stroke 12 mm - Overhang approx. 150 mm - Table size 280 x 180 mm - Adjustable installation height up to max. 300 mm - 2 manual controls - Air inlet 6 - 8 bar - Total space requirement approx. W 600 x H 2500 x D 900 mm - Weight approx. 400 kg

Year of construction: 1999, condition: excellent (used), machine/vehicle number: 167, Format (cm): 58 Equipment / Additional information: Ljdpfx Aohu R U Dsbnjac 1xreserve knife Very good condition // tested, checked and revised

Condition: good (used), Year of construction: 1999, Vertical machining center / EUMACH MC 1050 P - CE marking - Year of manufacture 1999 - Heidenhain 426 control system - Oil cooler - Complete documentation Lasdpfxex Ihh Ej Abnjc - COMPLETE TECHNICAL DATA - SEE PHOTOS Dimensions: L x W x H 2.8 x 3.45 x 2.8 meters / Weight 6500 kg Errors and omissions excepted.

Condition: used, Year of construction: 2002, We are offering this used Finnsonic MC-360/III ultrasonic cleaning system, year of manufacture 2002. If you have any questions or require further information, please feel free to send us a message or give us a call. Lodpfoywua Tex Abnjac The dimensions of the individual tanks are approximately: width 750 mm x depth 600 mm x height 600 mm.

Condition: like new (used), Year of construction: 2020, I am offering furniture dollies/storage trolleys with the following dimensions: Width x Depth x Height: 2000 x 1150 x 1800/2000/2200/2400 mm ✅ Current stock: approx. 2,000 units ✅ Other sizes of furniture trolleys available on request. ✅ Each furniture dolly is fully refurbished (replacement of panels, pins). ✅ We provide a 1-year warranty on used furniture trolleys. • Stackable up to 3 units high • Wheels made of 100% polyamide, 4 swivel casters, 1 wheel with directional lock Laodpfxjxgifye Abnsc • Empty trolleys can be folded and nested into each other The furniture dolly is ideal for in-house transport and storage of almost all types of goods. Thanks to the triple stacking capability, the full storage height can be optimally utilized. All trolleys are in very good condition. Invoice provided as a matter of course. Transport available across Europe. KAM-KUB Logistic&Trolleys Europe – Your specialist for sales and service of furniture dollies in Europe.

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, turning length: 532 mm, turning diameter over cross slide: 500 mm, turning diameter: 325 mm, spindle speed (max.): 3,500 rpm, spindle bore: 65 mm, travel distance X-axis: 195 mm, travel distance Z-axis: 430 mm, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, rotational speed (max.): 5,000 rpm, total length: 2,875 mm, chuck outer diameter: 260 mm, total width: 1,675 mm, spindle nose: A2-8, overall weight: 4,650 kg, Equipment: documentation/manual, rotational speed infinitely variable, We have acquired this HWACHEON HI-TECH 200BL MC directly from production in working condition—see the video of the machine operating prior to dismantling. The machine is very comprehensively equipped and comes standard with: - C-axis + driven turret (both positions). - Renishaw probe. - Chip conveyor + collection bin. - Röhm 3-jaw chuck (DURO-NC 260/3) including 2 sets of top jaws. - 13 EWS toolholders, 4 of which are driven. - Various clamping sleeves and collets. - Original HWACHEON and FANUC documentation. The machine can be inspected under power in our showroom! Lodpfx Ajypc H Robnjac

Condition: used, R80E MC is a model of the rotary copy shaper (router-shaper) by Rye Machinery Ltd (High Wycombe, England), manufactured in 1983 (serial number 112/83). Details of the R80E MC model - Machine type: Automatic rotary shaper with single or dual spindle for shape copying in furniture wood (shaper/copy router). - Year of manufacture: 1983 (112/83 – 112th machine in 1983 or December 1983). - Application: Processing of furniture legs, frames, profiles – table rotation copies template onto the part. Lodpjyrn Raofx Abnsac Typical technical parameters R80/R80E - Rotary table diameter: approx. 1600 mm (as in similar model R80 SM Speedmax). - Motor power: approx. 5–7.5 kW per spindle, speed 6000–9000 rpm. - Tables: Hydraulically/pneumatically rotating, with clamping. - Lubrication: Exactly as on the nameplate – Shell/Telania grease daily at red points.

Condition: used, overall weight: 150,000 kg, total length: 22,000 mm, total width: 10,000 mm, total height: 6,500 mm, milling spindle motor power: 63,000 W, The machine was originally manufactured in collaboration between Waldrich Coburg and Waldrich Siegen as a heavy CNC gantry milling machine for the industrial large-part and heavy-duty machining sector. 63 kW milling and drilling unit NC universal milling head B and C axis Automatic tool changer 60-slot tool magazine ISO50 / SK50 IKZ Enclosed work area Heavy industrial construction Electronic handwheel Siemens Sinumerik 840D Heavy CNC gantry milling machine from Waldrich Siegen for machining large and heavy workpieces. The machine comes from an ongoing industrial project / plant closure and is already dismantled or prepared for transport. Particularly interesting for: Heavy-duty machining Large-part machining Mechanical and plant engineering Steel construction Tool and mold making Important note: The machine must be picked up from Rüsselsheim by the end/mid-June at the latest due to short-term plant clearance. This allows for a very attractive special price. Sale from location. Subject to prior sale and errors excepted. Feed speed Z-axis: 3500 - mm/min Lajdpfxszdfx Eo Abnsc Travel Y-axis: 1250 - mm Passage between the uprights: 2,500 mm Dimensions (LxWxH) approx.: 22000 x 10000 x 6500 mm Weight approx.: 150,000 kg Grinding spindle speed: 5000 - rpm Distance table/plunger max.: 1,250 mm Travel X-axis: 10000 - mm Performance of the milling spindle: 63 kW Condition: unchecked Terms of payment: 100% prepayment before pick-up Terms of delivery: Free loading on truck under power: No

Condition: used, Year of construction: 1992, spindle diameter 100 mm x-travel 3500 mm Lodoy U N I Tepfx Abnjac y-travel 2500 mm total power requirement 44 kW weight of the machine ca. 38 t dimensions of the machine ca. 8,1 x 6,2 x 4,5 m

Condition: new, Machining center with 4 CNC-controlled axes for machining profiles made of aluminum, PVC, and steel Comparable to Emmegi, Elumatec, Fom, Pertici, etc. Machine frame in a stable welded construction, stress-relieved by annealing, with hardened linear guides Protective cabin covering the entire machining length Pneumatically opening protective door Milling spindle: 3.8/4.6 kW S1/S6 3.0/3.7 Nm S1/S6 max. 18,000 rpm, air-cooled with ISO 30 tool holder with minimum quantity lubrication system for the tools with level monitoring Tool magazine: 5 positions, on the left side in the machine bed, for holding drilling, milling, threading tools, angle head, and disc cutters up to Ø 150 mm Workpiece clamping: 4 pneumatic profile clamps, clamping range up to 250 mm automatic positioning via device on the Z-axis Workpiece positioning: one pneumatic reference stop each on the left and right on the A-axis Travel distances: X-axis 3500 mm Laedpfx Abswrcwpsnoc Y-axis 370 mm Z-axis 348 mm A-axis ±90° Travel speeds: X-axis 70 m/min. Y-axis 30 m/min. Z-axis 30 m/min. A-axis 60°/sec Maximum working areas: X-axis 3270 mm Y-axis 250 mm at 0°, 116 mm at ±90° of the A-axis Z-axis: 170 mm at 0°, 200 mm at ±90° of the A-axis Operating software: CAD/CAM in 3D technology (option, included!) Programming system according to ISO standard Functionality: Linear and circular interpolation on two axes (X-Y) Three-sided machining by swiveling the A-axis 90°-0°-90° End face machining using disc cutters Operating modes: One profile bar over the entire machining length Two profile bars in divided machining length Lubrication system: Automatically controlled central lubrication for all axes, ball screws, and guides, with level monitoring Operation: 18.5" TFT Mouse + keyboard Connection data: Electrical: 400 V/50 Hz (3-phase + N + PE), 16 A, Delivery without power cable Pneumatic: Pressure 6 - 8 bar Dimensions and weight: Length: 5800 mm Width: 1640 mm Height: 2000 mm Weight: 2000 kg incl.: Graphical programming software CM3D/CAD3D Barcode reader Teleservice with remote maintenance/diagnosis for 1 year after commissioning

Condition: excellent (used), Year of construction: 2001, Krauss Maffei KM 800-5000 MC injection moulding machine Year of manufacture: 2001 Equipment: robot Technical details: Clamping force: 8,000 kN Maximum mould opening force: 356 kN Moving platen feed force (opening): 98 kN Moving platen force (closing): 92 kN Platen size (W × H): 1,610 × 1,530 mm Laodozd Ta Nepfx Abnoc Tie-bar spacing (W × H): 1,120 × 1,000 mm Mould opening stroke: 1,400 mm Minimum mould height: 600 mm Maximum daylight: 2,000 mm Hydraulic ejector stroke: 250 mm Screw diameter: 90 mm L/D ratio: 23 Injection pressure: 1,742 bar Injection volume: 2,863 cm³ Shot weight (PS): 2,605 g General machine data Dimensions (L × W × H): 10,500 × 2,860 × 2,890 mm Weight: 43,000 kg

Condition: new, Year of construction: 2026, load capacity: 15,000 kg, total length: 6,430 mm, Electric forklift JMG MC 100.08 Drive Electric Lodpfxjzagm As Abnsac Year built 2026 Lifting weight (kg) 15,000

Condition: new, total length: 6,520 mm, Year of construction: 2026, lifting height: 2,470 mm, load capacity: 25,000 kg, - Ladegerät Hersteller: Zivan - Model: Battery Charger NG9 - Input: 400V, 12A, 50-60Hz - Output: 96V, 80A - hintere Hintergruppe mit zwei unabhängig voneinander drehenden Gruppen Ljdpezagmvefx Abnjac - Vorderachsenantrieb mit gegenläufiger Bewegung - großer Freihubmast - Abnehmbare Kontergewichte - Ausfahrbare Hintergruppe: 7720 mm - Max Tragfähigkeit Gabel mit offener Hintergruppe: 25t@0.9m - Max Tragfähigkeit Gabel mit geschlossener Hintergruppe: 16.5t@0.9m - Antrieb: Vorderachser Antrieb mit gegenläufiger Bewegung N°2 Elektromotoren AC 12 kW 96V - Gesamtgewicht mit Gabeln Kg. 25.000 - Gesamtgewicht mit Ausleger Kg. 25.000 - Gabelhalterung und Gabelzahn: 3.000 kg - Gewicht vom Kranmast: 3.000 kg - Gewicht von den abnehmbaren Kontergewichten : 6.000 - Batterie: 96 V - 1050 Ah - Betriebsbremse: hydraulisch mit Fußsteuerung - Park- und Notbremse: hydraulisch mit automatischer Steuerung - Lenkung: über die Hinterachse - Park- und Notbremse: hydraulisch mit automatischer Steuerung - Auslegerwinkel vom Mast+12°/-7° - Motor: N° 1 Elektropumpe AC 35kW 96V

Condition: new, Year of construction: 2026, load capacity: 15,000 kg, lifting height: 6,300 mm, total length: 6,430 mm, Electric forklift Laodezagmpepfx Abnsc JMG MC 100.08 Drive Electric Year built 2026 Lifting height (mm) 6,300 Lifting weight (kg) 15,000

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Equipment: chip conveyor, documentation/manual, For sale is a vertical CNC machining center, STAMA MC015, based on FANUC ROBODRILL α-T14iA with a FANUC 16i-M control system. Lajdpey Uwvxsfx Abnsc Equipment: 14-position tool changer High-speed spindle BT30 / SK30 tool holder Coolant system Compact design FANUC CNC control system With additional swivel/tilting table 5-axis machining possible Technical data: Travel ranges approximately X500 / Y380 / Z300 mm Up to 24,000 RPM Year of manufacture: 2000 Weight approximately 1800 kg