CNC Vertical Machining Center

Spinner MC 650

Condition: used, travel distance X-axis: 650 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, total height: 3,000 mm, total length: 3,600 mm, total width: 2,200 mm, table width: 450 mm, table length: 710 mm, SPINNER MC650 CNC Vertical machining centre X - Travel 650 mm Y - Travel 450 mm Z - Travel 450 mm Table Length 710 mm Table Width 450 mm Length 3600 mm Width 2200 mm Height 3000 mm Fodszimhkspfx Apwjgf Weight 9500 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2008, operating hours: 40,255 h, functionality: fully functional, For sale is a DMG DECKEL MAHO DMF 220 linear, a 5-axis universal travelling-column machining center. The machine was built in 2008 and was modernized / totally retrofitted in 2022 with Siemens Sinumerik 840D Solution Line control. Equipped with 5-axis simultaneous machining license, Siemens Sinamics drive technology, Siemens OP15 Black Operator Panel, MCP control panel and electronic handwheel. Technical data: Manufacturer: DMG DECKEL MAHO Type: DMF 220 linear Machine type: 5-axis universal machining center / travelling-column machining center Year of manufacture: 2008 Control: Siemens Sinumerik 840D Solution Line Modernization / Total Retrofit: Siemens CNC / drive modernization in 2022 5-axis simultaneous operation: License available Serial number: 15115223244 Machine number: 2499093 Travel X: 2,200 mm Travel Y: 560 mm Travel Z: 720 mm Tool taper: SK 40 Table load: 2,500 kg Main spindle speed range: 20 - 14,000 rpm Connected load: 80 kVA Max. rated current: 115 A Fuse protection: 125 A Fgjdpfx Apeyuzg Howsf Supply voltage: 400 V Frequency: 50 Hz AC control voltage: 230 V DC control voltage: 24 V Power-on hours: approx. 40,255 h Spindle / working hours: approx. 13,082 h CNC / drive technology: X-axis: Siemens Sinamics 160 A, 2 x SMC20 encoder module Y-axis: Siemens Sinamics 50 A, 2 x SMC20 encoder module Z-axis: Siemens Sinamics 80 A, 2 x SMC20 encoder module B-axis: Siemens Sinamics 25 A, 2 x SMC20 encoder module A-axis: Siemens Sinamics 25 A, 2 x SMC20 encoder module Spindle axis: Siemens Sinamics 26 kW, 2 x SMC20 encoder module Operator panel: Siemens OP15 Black Operator Panel MCP control panel: Siemens Electronic handwheel: Siemens Magazine technology: Magazine A: 400 W servo drive, 400 W servo motor, 10 m power cable, 10 m encoder cable Magazine B: 400 W servo drive, 400 W servo motor, 10 m power cable, 10 m encoder cable Magazine C: 400 W servo drive, 400 W servo motor, 10 m power cable, 10 m encoder cable Software / licenses: 5-axis simultaneous machining license Axis licenses Operator software license Equipment: Integrated swivelling table / trunnion-type table setup Paper band filter unit Coolant / filter unit Electrical cabinet Full enclosure Working area lighting Siemens control panel Condition: Machine in well-maintained condition Modernized Siemens control and drive technology 5-axis simultaneous machining available

Condition: used, Year of construction: 1994, cutting diameter 520 mm saw band length 7239 mm cutting width 1,3 mm Control POSIMOD cutting range - square - 520 x 520 mm feed length 500 mm Fsdpfxewm Rm Io Apwsgf feed length: multiple 4500 mm min. cut-off length 6 mm length of rest piece min/max 10 / 100 mm cutting speed 20 - 130 m/min dimensions of saw-band 7239 x 50 x 1,3 mm sawing motor 5,5 kW total power requirement 10,0 kW weight of the machine ca. 3,8 t dimensions of machine L x W x H 3,42 x 2,30 x 2,40 m - 2 column guided - Accessories: roller track 2500 mm length, chip conveyor, coolant

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, controller manufacturer: HEIDENHAIN, controller model: HEIDENHAIN TNC-620, total height: 2,500 mm, total length: 3,600 mm, total width: 2,500 mm, table width: 1,000 mm, table length: 450 mm, table load: 600 kg, overall weight: 5,000 kg, spindle speed (min.): 80 rpm, spindle speed (max.): 12,000 rpm, coolant supply: 20 bar, spindle nose: ISO 40, number of spindles: 1, number of slots in tool magazine: 30, tool length: 300 mm, tool diameter: 80 mm, tool weight: 8 g, input voltage: 380 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, USED "DOOSAN DNM 4500" vertical machining center with Heidenhain TNC-620 CNC Fgodpfxow D Dy Ns Apwef

Condition: good (used), Year of construction: 2005, Parts shown by hand not come. Fjdpfx Asvf D Anopwsgf

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, turning diameter over cross slide: 570 mm, spindle bore: 62 mm, turning length: 1,250 mm, turning diameter over bed slide: 365 mm, center height: 280 mm, overall weight: 4,000 kg, O F F E R Fgjdpfxsyqw Eqs Apwef We can offer you, subject to prior sale and errors excepted, ex-stock and without obligation: V D F - BOEHRINGER Cycle-Controlled Universal Lathe Model DUS 560 Year of Manufacture 1998 / completely overhauled in 2008 _____ Centre height 280 mm Max. swing diameter over bed 570 mm Max. swing diameter over cross slide 365 mm Cross slide / top slide travel 345/125 mm Centre distance / max. turning length 1,250 mm Spindle bore 62 mm Spindle speeds, 2-step infinitely variable 3–500 / 15–2,500 rpm Infinitely variable longitudinal and facing feeds 0.01–50 mm/rev Rapid traverse longitudinal/cross 5 and 10 m/min Max. feed force facing/longitudinal 6.5 / 12.5 kN Workpiece weight max. between centers/with tailstock 400 / 1,000 kg Thread pitches 0.1 – 400 mm/pitch Spindle drive motor 15/21 kW Total drive 25 kW - 400 V - 50 Hz Weight approx. 4,000 kg Accessories / Special Equipment: • SIEMENS 2-axis cycle control, type 805, with direct input of all turning parameters via interactive user interfaces and suitable software, controller and monitor integrated in the sliding door, with memory extension and software for free contour entry, graphics, etc. • 2 electronic handwheels for fine adjustment of carriage movement in Z and X axes, and new joystick for rapid traverse +Z/-Z and +X/-X, joystick for main spindle with stepless forward and reverse speeds • Mounted 3-jaw chuck model SCA Ø 300 mm, faceplate approx. Ø 500 mm, 4-jaw chuck Ø 315 mm, driver plate approx. 250 mm, single faceplate 500 mm, various jaws • Mounted MULTIFIX toolpost type CD with 5 different Multifix holders • Separate toolpost block for mounting CAPTO toolholder with internal coolant supply, various holders, partially with collets • Tailstock with air bearing for easy movement, work light • Mobile chip trolley with coolant pump and oil skimmer, 2 rear sliding doors • Separate electrical cabinet, adjustable spindle end stop, work light, etc. Condition: very good – guides in very good condition, machine is under power and ready for demonstration Please click here for a video of the machine: Delivery: ex stock – as inspected Payment: strictly net before delivery We look forward to receiving your order. Further lathes of all sizes in stock – please enquire.

Condition: good (used), Year of construction: 2008, Ref. -No.: 10564 Manufacturer: TOYODA Type: FH 630 SX Year of construction: 2008 Type of control: CNC-Steuerung Control: Fanuc 31i - A Storage location: Halberstadt Country of origin: Japan Serial no.: NS2XXX X-Travel: 1000 mm Y-Travel: 800 mm Z-Travel: 850 mm B-Axis: 360 ° Max. Workpiece Weight: 800 kg Max. Tool Weight: 27 kg Max. Tool Length: 545 mm Max. Tool Diameter: Ø 120 mm Max. Size Of Workpiece Lxwxh: Ø 1000 x 1000 mm Tool Taper: BT - 50 Tool Piece Magazine With: 60 Pcs./pcs. Spindle Speed: 6000 RPM Machine length: 7000 mm Machine width: 3500 mm Weight Of The Machine Ca.: 20,1 t Further information: Fgedpexvw Izjfx Apwjf - Equipped with IKZ and chip conveyor - NC rotary table 360,000 * 0.001° Machine can be inspected under power by arrangement.

Condition: used, Year of construction: 1998, Turning length 322 mm Max. swing over bed ways 510 mm Max. turning dia. 279 mm Spindle speeds 60-6000 rpm Spindle bore 53 mm Turret w/12 stations Control: Fanuc 21 T Equipped with: Magazine bar feeder Hatec Rapid Load 12 Tail stock Fgodpfxjx N A N Hj Apwjf Various tool holders & collets 3-jaw chuck

Condition: used, Year of construction: 1996, operating hours: 7,827 h, functionality: fully functional, machine/vehicle number: 119713, turning diameter over cross slide: 160 mm, turning length: 244 mm, turning diameter: 160 mm, spindle bore: 45 mm, spindle speed (max.): 6,000 rpm, spindle speed (min.): 1 rpm, travel distance X-axis: 155 mm, travel distance Z-axis: 290 mm, spindle motor power: 10,000 W, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, rotational speed (max.): 6,000 rpm, total height: 1,780 mm, total length: 2,000 mm, total width: 1,330 mm, quill travel distance: 150 mm, quill diameter: 55 mm, quill stroke: 150 mm, workpiece weight (max.): 25 kg, overall weight: 2,700 kg, bar passage: 40 mm, chuck outer diameter: 154 mm, bar diameter (max.): 45 mm, spindle diameter: 50 mm, Equipment: documentation/manual, rotational speed infinitely variable, The Mazak Quick Turn 10 is a compact CNC lathe manufactured by the Japanese company Mazak. It has been specifically developed for the precise machining of small and medium-sized turned parts and is widely used in mechanical engineering, toolmaking, as well as in series production. The machine features a robust slant-bed design, a tool turret, and the dialog-based Mazatrol control system, which enables fast programming directly at the machine. This makes it suitable both for single parts and small series production. Fodpfx Apjyt E Nvowogf Control: Mazatrol T-Plus Standard chuck: Kitagawa N-06A0515 The quoted price does not include dismantling, packaging, or shipping. Sale ex location, subject to prior sale. The machines are sold in used condition; any warranty and guarantee are excluded.

Condition: good (used), Parts shown by hand not come. Fgedpfoyb R Ersx Apwof