CNC vertical machining center

Mazak VTC-300C II

Condition: good (used), Year of construction: 2003, X 1740mm, Y 766mm, Z 660mm Hnjdjwyblzspfx Ad Rsl 10000 rpm Parts shown by hand not come.

Condition: good (used), Year of construction: 1997, Ref. -No.: 10619 Manufacturer: KELLENBERGER Type: 600 U Nr. 35 Year of construction: 1997 Type of control: Konventionell Control: n/a Storage location: Halberstadt Country of origin: Switzerland Distance between center: 600 mm Center height (standard): 125 mm Height of centers by lifting work blocks head and tailstock: 175 - 250 mm Swing diameter with lifting blocks max.: 350 - 500 mm Table swivel / each side: 10 ° Dwell time of the table reversal: 0- 5 Sec Diameter / width / hole: 250 x 13 x 76 mm Speeds of the grinding wheel spindle: 1500 / 1700 / 2200 / 3600 Swiveling grinding wheel head: 360° ° Cross movement of the grinding wheel head: 285 mm Quickly pulling the wheel head back and forth: 40 mm Intermittent injection for each reversal of the table: 0,001 - 0,03 mm / dia Working speeds continuously adjustable (normal / special): 20-400 / 10-400 Max. Grinding length: 900 mm Hjdpsya Dayjfx Ad Renl Further information: The machine can be viewed while powered up.

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, travel distance X-axis: 1,740 mm, travel distance Y-axis: 760 mm, travel distance Z-axis: 660 mm, controller model: Mazatrol 640M, rotational speed (max.): 12,000 rpm, TECHNICAL DETAILS X-axis: 1,740 mm Y-axis: 760 mm Z-axis: 660 mm Rapid traverse X-axis: 36 m/min Rapid traverse Y-axis: 36 m/min Rapid traverse Z-axis: 36 m/min Table size: 2,000 x 760 mm Table load capacity: 1,400 kg Distance from table surface to spindle nose: 160 mm - 840 mm Spindle speed: 12,000 rpm Main drive power (5 min): 18.5 kW Main drive power (30 min): 11 kW Tool Changer Number of tool stations: 30 Spindle taper: SK 40 Max. tool diameter: 80 mm Max. tool diameter with free adjacent stations: 110 mm Max. tool length: 350 mm Max. tool weight: 8 kg MACHINE DETAILS Control: Mazatrol 640M Interfaces: RS232, LAN, Floppy drive Dimensions & Weight Dimensions (L x W x H): 4,435 x 3,300 x 3,442 mm Machine weight: 11,500 kg Operating Hours as of 23.05.2025 Operating hours: 6,585 h Cutting hours: 8,300 h Auto cutting hours: 8,374 h EQUIPMENT Hnsdpfxsya Dh Ro Ad Rol Documentation/manual Chip conveyor Relocation detector Automatic tool length measurement system Preparation for partition wall for pendulum machining 4th axis Electronic handwheel EIA / ISO programming Synchronous tapping Through-spindle coolant, 5 bar

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: 175849, travel distance X-axis: 1,740 mm, travel distance Y-axis: 760 mm, travel distance Z-axis: 840 mm, controller model: PC Fusion 640 M, total height: 4,450 mm, total length: 3,300 mm, total width: 2,900 mm, overall weight: 11,500 kg, spindle speed (max.): 12,000 rpm, 3-Axis Machining Center MAZAK - VTC 300C-II Manufacturer: MAZAK Model: VTC 300C-II Control: PC Fusion 640M Year of manufacture: 2005 Internal coolant supply (IKZ): 15 bar Table length: 2000 mm Table width: 760 mm Feed rate X-axis: 36,000 mm/min Feed rate Y-axis: 36,000 mm/min Feed rate Z-axis: 36,000 mm/min Tool holder: SK 40 Spindle power: 15 kW Hodpfx Adoyanuho Rsnl Spindle speed: 12,000 rpm Tool changer: 30 positions Internal coolant: Yes Number of controlled axes: 3 Chip conveyor: Yes Cooling unit: Yes Length: 4450 mm Width: 3300 mm Height: 2900 mm Can be inspected under power.

Condition: excellent (used), Year of construction: 1994, center height: 100 mm, grinding length: 380 mm, total width: 1,500 mm, total length: 1,300 mm, total height: 1,350 mm, grinding diameter: 200 mm, spindle speed (max.): 1,800 rpm, overall weight: 2,100 kg, pivoting range: 10 °, Centre height: 100mm Grinding Ø: 200mm Grinding length: 380mm Grinding stone dimensions:300 x 50 x 127mm Grinding stone speeds: 1800Rpm Table inclasement: 10° Tailstock: 4Mk Length: 1300mm Width: 1500mm Height: 1350mm Hnedpfx Aeyu Nqgod Rol Weight: 2100kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 2007, This Sodick AQ537L was manufactured in 2007. It operates optimally between 20°C and 25°C ambient temperatures, with a full load current of 43 A and a rated capacity of 15 kVA. It requires a supply voltage of 200 V and is designed for three-phase power. Contact us for more information about this machine. • Relative humidity: 40%–50% • Operating temperature: 10°C–35°C • Recommended ambient temperature: 20°C–25°C • Full load current: 43 A • Rated capacity: 15 kVA • Frequency: 50/60 Hz • Phase: 3 P Hsdpfsx D Ipljx Ad Rsnl • Supply voltage: 200 V

Condition: used, Year of construction: 2006, Wire erosion / EDM Travel distance X: 570 mm Travel distance Y :370 mm Travel distance Z: 350 mm max. workpiece size X: 770 mm max. workpiece size Y: 520 mm max. workpiece size Z: 340 mm max. workpiece weight: 1000 kg Hsdpfxey Egfks Ad Rsnl table size X: 806 mm table size Y: 496 mm with AWF ( Automatic Wire Feeding ) U / V axis: 120 x 120 mm generator: 60 Ampere 3-sided rise and fall tank Linear drives on axes X, Y, U, V Linear scales on axes X, Y, U, V Automatic high-speed wire threading unit Ceramic components integrated in working table, Z axis quill, clamping block, wire guide Dielectric cooling controlled by thermostat 15" TFT colour monitor Max. matching current 60 A CNC power supply unit LQ33W

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, X-axis 500 mm Y-axis 350 mm Z-axis 300 mm U/V-axis 75 mm Hnedpfx Adjyvr Tzj Rjl Max. workpiece dimensions 1,050 x 800 x 290 mm Max. table load 1,500 kg Machine weight approx. 4,000 kg Machine is available immediately from stock.

Condition: ready for operation (used), Year of construction: 1994, Studer S30-1 Hsdsy Rmxujpfx Ad Ronl Year of manufacture: 1994

Condition: good (used), Year of construction: 2006, FOR SALE Mitsubishi FA20S Wire EDM Machine Technical Data: - Model: FA20S (High Performance Series) - Travel (X x Y x Z): 500 x 350 x 300 mm - U/V Axis Travel: ±32 mm - Maximum workpiece dimensions: 1050 x 800 x 295 mm - Maximum workpiece weight: 1,500 kg Hnjdpfx Adjyzct As Rsl - Maximum taper angle: ±15° (over 100 mm height) Year: 2006 Included Equipment and Options: - Filtration system: TFA20SM dielectric fluid tank - Automatic wire threading (AT) for efficient unmonitored machining - Mitsubishi CNC with user-friendly interface - Generator featuring anti-electrolysis technology for improved surface integrity Key Advantages: This machine offers excellent thermal stability and high reliability. Furthermore, spare parts and consumables (guides, filters) are readily available on the market. Condition: Used machine in good overall condition. Please do not hesitate to contact me for further information or to discuss the price. BT MACHINES PURCHASE AND SALE ALL TYPES OF INDUSTRIAL EQUIPMENT ALL TYPES OF MACHINE TOOLS