Used Mewa Shredder for sale (11)

Condition: ready for operation (used), Year of construction: 2010, operating hours: 20,000 h, functionality: fully functional, overall weight: 15,000 kg, rotor diameter: 500 mm, rotational speed (max.): 200 rpm, power: 90 kW (122.37 HP), input voltage: 400 V, type of input current: three-phase, The MeWa Universal Granulator UG 1000 is a high-performance, stationary single-shaft secondary shredder, specifically designed for the fine shredding and recycling of various composite materials and waste. The machine operates according to the principle of a guillotine shear, in which the material is cut between rotating and stationary blades. Drive power: 90 kW Cutting chamber / working width: 1,000 mm Number of blades (rotor / stator): 25/5 blades Rotor diameter (circle of rotation): 500 mm Total weight: approx. 15 tons Screen size: Flexible, interchangeable screens under the rotor determine the final particle size (typically between 10 mm and 80 mm). Dcsdpfx Akoz Antue Ajp

Condition: not inspected (used), Year of construction: 1994, functionality: unexamined, Rotor shear UC 140, with hydraulic post-compressor (HNDE), Drive: 2 x 22 kW, control cabinet, cutting head size: 1450 mm x 1000 mm, blade width: 85 mm, Dcede Aibitjpfx Ak Aop Cutting head requires repair.

Condition: ready for operation (used), Year of construction: 2000, year of last overhaul: 2020, overall weight: 40,000 kg, Infeed opening: approx. 2000 mm x 1300 mm, hopper: approx. 5500 x 3000 mm Rotor shaft length: approx. 2000 mm Shaft speed: 16 RPM each Number of knives: 28 rotor knives with scraper Knife width: approx. 70 mm Rated power: 158 kW Drive motor: 2 x 75 kW, with special coupling Hydraulic unit: 7.5 kW Hydraulic pressure intensifier (HNDE) Djdpfx Aks Agpxae Aecp

Year of construction: 2008, operating hours: 18,500 h, condition: ready for operation (used), functionality: fully functional, Universal granulator MeWa UG 1600, Drive power: 110 kW, Rotor length: 1600 mm, Hydraulic feed system (HNDE), Dcodpfxs Ahtime Ak Aop Control cabinet, Includes discharge conveyor, stairs, and railings. Wear parts have been replaced. Available from approximately the end of November 2026.

Year of construction: 2010, operating hours: 10,000 h, condition: refurbished (used), functionality: fully functional, MEWA UC 120 B with HNDE, 2 x 30kW / 15 RPM. Large bale infeed hopper. Includes a discharge conveyor and a 10-meter-long inclined conveyor. Neodymium magnet roller at the head. Dcsdpfx Akoz A R I Se Aep The UC 120 B was manufactured in 2010 and completely overhauled in 2025. The cutter unit is brand new. New blades, new shafts, new bearings, new scrapers. Plus costs for dismantling and transport.

Year of construction: 2005, operating hours: 20,000 h, condition: used, functionality: fully functional, MEWA UG1008 MS industrial granulator – 160 kW For sale: an industrial MEWA UG1008 MS granulator designed for the secondary shredding and granulation of various pre-shredded industrial and secondary raw materials. This is a robust, German-made MEWA unit designed for continuous industrial operation. The machine is equipped with a powerful 160 kW ABB electric motor, a hydraulic material clamping mechanism, a perforated screen, and electrical control cabinets. The unit can be used in various waste and secondary raw material processing lines, depending on the installed screen and the specific material being processed. MEWA UG1008 type granulators are used, among other things, for the granulation of pre-shredded tires, RDF/SRF alternative fuels, and other materials. Key technical data: Manufacturer: MEWA Model: UG1008 MS Type: industrial granulator Main motor: ABB Motor power: 160 kW Power supply: 400 V / 50 Hz Rotor diameter: approx. 800 mm Cutting chamber dimensions: approx. 1000 × 800 mm Rotor blades: 25 pcs. Stator blades: 5 pcs. Hydraulic clamping Replaceable perforated screen Electrical control cabinets Total unit weight: approx. 18 t (depending on the specific configuration) These technical parameters correspond to publicly available MEWA UG1008/UG1008 MS specifications. Applications The granulator can be adapted for: pre-shredded tires; RDF/SRF alternative fuels; plastic waste; various industrial wastes; other secondary raw materials that require secondary shredding. The final fraction and output depend on the type of material, its fraction, moisture content, density, the installed screen, and the condition of the blades. Reference MEWA UG1008 technical descriptions indicate an output of up to 2.0–4.5 t/h for pre-shredded tires or alternative fuels; however, this is not a guaranteed performance for your specific machine – it must be evaluated based on the actual material and configuration. Dsdpez Duuxofx Ak Ajcp Configuration Based on the inspection, the configuration includes: MEWA granulator; 160 kW ABB electric motor; hydraulic system; perforated screen; electrical control cabinets; cables and other related equipment. The machine is sold in the configuration as shown in the photos.

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, total height: 3,400 mm, total width: 2,400 mm, total length: 3,900 mm, overall weight: 6,000 kg, input voltage: 380 V, power: 80 kW (108.77 HP), rotary shear 2 shafts - 2 motors 40kw - inversion in case of jam - shredding chamber 1100 x 900 - thickness of new knives 80 - 5 tons - large loading hopper - possibility of loading very versatile and very powerful, can pre-grind organic matter for methanizers, copper cables, lumps, plaster, BA13, D3E, plastics, wood, bumpers, bottles, metals, hollow bodies, etc. use to grind up sick calves at the renderer. Dedpsh Diwuofx Ak Aecp

Condition: used, year of last overhaul: 2023, We offer this used MeWa uc1300 shredding unit. (ANDRITZ Group) Overhauled in 01/2023. Includes 2 pairs of steel blades. Dedpfx Aksztqnpo Ascp If you have any questions or require further information, please contact us.

Condition: used, machine/vehicle number: 11403, Rotor blades: 2 x 7 stars Rotor width: 1200 mm Dcjdpsyx Nlyefx Ak Aop Rotor diameter: 350 mm Inlet: 850 x 1200 Power: 30 kW

Year of construction: 2014, condition: repair required (used), functionality: fully functional, The machine has been idle unused for a few years now, so it needs maintenance before commissioning, which should be the responsibility of the buyer. Dodpfx Akjtu U Ebe Aocp

Condition: ready for operation (used), Year of construction: 2001, overall weight: 3,000 kg, Disc screen machine, screen length: approx. 2600 mm, screen width: approx. 910 mm, disc spacing: approx. 170 mm, (offset by approx. 85 mm), axle distance: approx. 50-60 mm Overall length: 3450 mm, overall width: 1500 mm, height: 2400 mm, weight: approx. 2500 kg, FLENDER gearbox, 6 axle bearings on the drive side are brand new, Used machine in good, operational condition, No nameplate available. Dcodpfx Akszmav Ne Asp