Used Shredding for sale (835)

Condition: like new (used), Year of construction: 2023, operating hours: 111 h, functionality: fully functional, power: 22 kW (29.91 HP), overall weight: 4,000 kg, The PS1600 was designed for shredding pallets into high-quality wood chips. - Recycling of pallets into high-quality wood chips - Significant space saving by eliminating the need for disposal sites - No disposal costs - Simple and safe operation Details Technical data Machine type: PS1600 Operating hours: 111 h Year of manufacture: 03/2023 Cutting unit opening: 284 x 1,588 mm Drive description: Belt drive with a 2-stage gearbox and elastomer damper Drive power: 22 kW Rotor speed: 53 rpm Energy efficiency class: IE3 Voltage / frequency: 400 V / 50 Hz Cutting system: Rotor Feed table with infeed belt and infeed roller Speed control of the infeed rollers Design: Smooth Rotor diameter: 300 mm Number of knife rows: 1 Number of cutting tools: 43 Perforated screen: 70 x 40 mm with chip breaker Color / paint Machine: Gray Covers: Gold yellow Control cabinet Dodpfszntu Ujx Apwekr Control: Siemens LOGO control Color: Light gray Dimensions and weight Machine dimensions: l x w x h 4660 x 2320 x 2030 mm Total weight: 4 t Accessories Discharge screw: 3000 mm Trough chain conveyor 45°: 4000 mm Downpipe: 1000 mm Light barrier in the chip area OPTIONAL on request: Magnetic separator

Condition: refurbished (used), Year of construction: 2022, operating hours: 1,518 h, functionality: fully functional, power: 260 kW (353.50 HP), year of last overhaul: 2026, Basic Inventhor 6 package: Load-Sensing System Fuel tank, 500 liters Longitudinal belt: belt length 2,900 mm, belt width 800 mm centrally arranged lubrication strips 24V electrical control system - additional electric pump for operating the following functions when the engine is stopped: raise/lower/tilt rear belt, open/close comb flap, open/close comb, raise/lower folding chute complete radio remote control large side GRP maintenance doors easy-to-maintain engine compartment LED lighting package: engine compartment and rear hydraulically reversible fan wheel Djdoxx N Dgepfx Apwokr three-sided loading protection folding chute fire extinguisher maintenance ladder toolbox acoustic start-up warning Doppstadt telematics system paint: RAL2011 traffic orange Additional equipment: Drive train 260 kW - EV 2-axle semi-trailer chassis Shredding system Size L - 20 teeth Additional hydraulic connection 35 - 80 l/min Hydraulic drive Rear belt 7 m Over-belt magnet, neodymium Frame for over-belt magnet, 7 m Delivery date will be agreed upon.

Condition: refurbished (used), Year of construction: 2022, operating hours: 3,250 h, functionality: fully functional, transport width: 2,540 mm, transport length: 9,141 mm, transport height: 3,604 mm, power: 310 kW (421.48 HP), year of last overhaul: 2026, Base package Inventhor 6: Load-Sensing System Fuel tank 500 liters Longitudinal conveyor belt: belt length 2,900 mm, belt width 800 mm centrally arranged lubrication strips 24-V electrical control system – additional electric pump for operating the following functions when the engine is stopped: raising/lowering/tilting the rear conveyor belt, opening/closing the comb flap, opening/closing the comb, raising/lowering the folding hopper complete radio remote control large side GRP maintenance doors maintenance-friendly engine compartment LED lighting package: engine compartment and rear hydraulically reversible fan wheel three-sided loading protection folding hopper fire extinguisher maintenance ladder tool box acoustic start-up warning Doppstadt telematics system paint finish: RAL2011 deep orange Dsdpoxx N T Isfx Apwokr Additional equipment: Drivetrain 310 kW - EV 3-axle drawbar trailer chassis Shredding system Size L-C3 600/4-30Z Size L limiter Additional hydraulic connection 35 - 80 l/min Hydraulic drive Hopper extension 350 mm, watering system on the left Rear conveyor belt 4.9 m Over-belt magnet neodymium Frame for over-belt magnet Central lubrication Special paint finish in RAL * DoppBasket system can be retrofitted! * Delivery date will be agreed upon.

Condition: good (used), Year of construction: 2022, operating hours: 2,806 h, functionality: fully functional, Equipment: Basic Package Inventhor Type 6 Load-sensing system Fuel tank 500 liters Longitudinal conveyor: length 2,900 mm, width 800 mm Centrally arranged lubrication strips Dkjdpfxswnfwqo Apwor 24V electronic control – additional electric pump to operate the following functions when the engine is off: "raise/lower/fold rear conveyor, open/close comb flap, open/close comb, raise/lower folding hopper" Complete radio remote control Large side GRP maintenance doors Maintenance-friendly engine compartment LED lighting package: engine compartment and rear Hydraulically reversible fan Three-sided loading protection Folding hopper Fire extinguisher Service ladder Toolbox Acoustic start-up warning Doppstadt telematics system Paintwork: RAL2011 deep orange Special Equipment: Powertrain 310 kW - EV 3-axle drawbar trailer chassis unit Shredding system Size L 600/4 - 30 Z Additional hydraulic connections 35 - 80 l/min Hydraulic drive Rear conveyor 4.9 m Overband magnet neodymium Frame for overband magnet

Condition: refurbished (used), Year of construction: 2022, operating hours: 4,577 h, functionality: fully functional, power: 390 kW (530.25 HP), year of last overhaul: 2026, Basic Package AK565: Central axle trailer chassis with 2 axles, road approval for 80 km/h Brake system incl. ABS and lighting according to EC directive 50 mm EC drawbar eye incl. slip-on coupling Tyres: 385/65 R22.5 Hydraulically adjustable support leg Splash guards (inner and side-mounted fenders) Permissible total weight: 19,000 kg MTU diesel engine 6R1300, 390 kW at 2,000 rpm, complies with EUROMOT V emission standard Exhaust discharged upwards Load-dependent material feed control incl. automatic reversing of scraper floor Fuel tank, 450 L Feed roller: length 1,690 mm, diameter 510 mm, fitted with bolt-on tooth segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips - Dopplock system Standard: Flail tip “Streusel plus” Centrally arranged lubrication strips Electric pump for operating cylinder functions (e.g. raising/lowering the support leg and opening/closing the rear basket, folding/unfolding the rear conveyor, releasing the drive) when engine is stationary 24 V electrical control system Separate control panel at the rear of the machine Hydraulically folding fine shredding basket “Multimesh” (mesh sizes between 30 - 280 mm, gradations on request) incl. one-piece rear flap Scraper floor with 32 slats Chain drive for feed roller and scraper floor Complete radio remote control Drive preparation Rear discharge conveyor, 4 m long, 1,800 mm wide “classic” Anti-magnetic centre section on the discharge conveyor Reinforcement plates (Hardox) on both sides of feed hopper sidewall Fire extinguisher Acoustic start-up warning Doppstadt telematics system Finish: RAL2011 deep orange Optional Equipment: Dksdpfeyhckmex Apwer Hydraulic drive 600 L fuel tank Flail tip C1 “Bear Paw” with carbide insert Rear discharge conveyor 4 m, belt width 1,800 mm, lowerable Neodymium magnetic pulley incl. chute Separate drive for feed roller and scraper floor (“Twin Drive”) Duomatic coupling Smooth impact plate Fine shredding basket Delivery date by arrangement

Condition: refurbished (used), Year of construction: 2023, operating hours: 5,189 h, functionality: fully functional, power: 390 kW (530.25 HP), year of last overhaul: 2026, Equipment: Basic package Inventhor 9: - MTU diesel engine 6R1300, 390 kW at 1,700 rpm, complies with EUROMOT V emission standard - Auxiliary hydraulic connection 30 l/min and 70 l/min - Roller drive via planetary gear, 380 kW – VARIO – - Load-sensing system - Fuel tank 950 liters - Longitudinal conveyor belt: belt length 4,450 mm, belt width 1,000 mm - Centrally positioned lubrication strips - 24 V electrical control system - Additional electric pump for the operation of the following functions when the engine is off: “raise/lower/fold rear conveyor, open/close comb flap, open/close comb, optionally raise/lower permanent magnet belt, optionally raise/lower folding hopper” - Complete radio remote control - Large side GRP maintenance doors - Maintenance-friendly engine compartment with LED lighting - Hydraulically reversible fan - Loading protection on both sides - Fire extinguisher - Maintenance ladder - Toolbox - Acoustic start-up warning - Doppstadt telematics system - Paint: RAL2011 deep orange Additional equipment: Djdpfjyu Snujx Apwokr - 500 mm flat chain undercarriage unit - Watering system with hopper extension H=300 mm on both sides - Size "L" shredding system – VARIOMAT (Variomat system L600/4 – 42 teeth) - Rear conveyor length 7 m, width 1200 mm - Size "L" "Limiter" (20 pieces) - LED light package for engine compartment and rear - Central lubrication system with pump Delivery date to be arranged.

Condition: excellent (used), Year of construction: 2000, operating hours: 10,900 h, functionality: fully functional, overall weight: 16,000 kg, power: 308 kW (418.76 HP), Willibald MZA 3500 / Shredder / Chipper / Crusher • Manufacturer: Willibald • Type: MZA 3500 Dksdpfxozdtzmo Apwer • Year of manufacture: 2000 • Operating hours: 10,900 hours • Engine: MAN D 2876, 6-cylinder diesel • Power: 308 kW / 418 hp • Inlet opening: 500 mm • Number of axles: 2 tandem axles • Braking system: Air pressure • Number of cutting blades: 48 • Rotor speed: 1300 rpm • Drawbar: 40 mm • Fiberizing of organic material for composting, up to a diameter of 30 cm • Shredding of old wood and waste wood, up to a diameter of 30 cm • Total weight: 16,000 kg • German machine • Immediately ready for use • This offer is non-binding and subject to change. - Subject to prior sale, - Errors and/or typos not excluded. - Sale subject to our general terms and conditions.

Condition: excellent (used), Year of construction: 2015, operating hours: 1,642 h, functionality: fully functional, power: 22 kW (29.91 HP), UNTHA LR 1000 shredding machine, first owner, in very good condition: – Drive power 22 kW – Number of cutting tools: 27 pieces – Cutting tools with reversible cutting inserts – Hydraulic drive power: 1.5 kW – Elastic belt drive – 2-stage spur gear transmission in an oil bath – Design with conveyor screw and pivoting slide – Perforated screen with a diameter of 25 (30) mm – Bolted crushing edge above the inspection door – Cutting unit opening: 1000 x 1050 mm – Hopper volume: approx. 1000 liters – Dimensions W x H x D: 1805 x 1630 x 1706 mm – Rotor diameter: 300 mm – Weight: approx. 2400 kg – Control unit with 6 m connection cable – Control cabinet W x H x D: 660 x 760 x 210 mm – Emergency stop switch mounted on the machine Dksdpozr Rx Ejfx Apwer – Suction nozzle: 250 mm – Suction speed: min. 28 m/s – Optional with pipe magnet D 200 mm – Year of manufacture: 2015, first owner, very well maintained – Operating hours: original 1642 h – Machine was regularly serviced – Last service performed by authorized dealer in 01/2026 – Sale from location Karlsruhe / Southern Germany – Inspection and test run possible by arrangement

Condition: ready for operation (used), Manufacturer: H&G Model: HG/SV 11 Dkedpfx Aezp Ipispwsr Weight: 1800 kg Engine power: 11 kW

Condition: ready for operation (used), Manufacturer: H&G Model: HG/SV 11 Weight: 1800 kg Engine power: 11 kW Dkjdpfxjzp Ilqj Apwer

Condition: excellent (used), Year of construction: 2016, operating hours: 7,260 h, functionality: fully functional, Willibald EP5500 Shark waste shredder, manufactured in 2016. In perfect condition and ready for operation, with 7,260 operating hours. Dsdozrv Hujpfx Apwskr

Condition: excellent (used), Year of construction: 2017, operating hours: 7,183 h, functionality: fully functional, Willibald EP5500 Shark waste shredder, model year 2017. In perfect condition and ready for use, with 7,183 operating hours. Dodpfxjzrv E Rs Apwekr

Condition: excellent (used), Year of construction: 1988, operating hours: 3,100 h, functionality: fully functional, overall weight: 8,960 kg, Willibald MZA 2500/Shredder/Chipper • Manufacturer: Willibald • Model: MZA 2500 • Year of manufacture: 1988 • Operating hours: 3,100 hrs • Engine: V6 Mercedes-Benz • Throughput: 75 m³/h depending on material • Feed opening: 500 mm • Swinging hammers • Suitable for shredding organic material for composting (garden waste, pruned wood up to a diameter of 30 cm) • Capable of reducing waste wood and used timber up to a diameter of 30 cm • Number of axles: 2 tandem/dual axles • Brake system: Air brakes • Towing eye: 40 mm Dsdpjxu Dipofx Apwskr • Total weight: 8,960 kg • German machine • Immediately operational • This offer is non-binding and subject to prior sale. - Subject to intermediate sale. - Errors and/or typographical mistakes excepted. - Sale according to our general terms and conditions.

Condition: refurbished (used), Year of construction: 2019, operating hours: 3,922 h, Doppstadt Inventhor Type 9 Engine Type: Diesel engine Make: MTU 6R 1300 Emission Standard: Stage V / EUROMOT III A Rated Power: 390 kW / 530 HP Fuel Capacity: 1,000 l Discharge Conveyor Width: 1,200 mm Length: 8,500 mm Belt Speed: 2.0 m/s Discharge Height: 5,050 mm Feed Hopper Loading Height: 3,307 mm Drum Number of Drums: 1 Drum Length: 3,000 mm Drum Diameter: 600 mm Drum Speed: -5 – 32 rpm Number of Tools (inserts): approx. 42 MACHINE DETAILS Total Weight: 33,000 kg Length: 16,786 mm Width: 2,500 mm Height: 5,050 mm Transport Width: 2,500 mm Transport Height: 3,893 mm Transport Length: 9,973 mm Operating Hours: 4,724 h EQUIPMENT - Additional equipment: Overband magnet - New stepless drive concept with VarioDirect Drive - No engine load caused by start-up torque thanks to load-free drum positioning - Self-cleaning function for the wrapping unit Djdpexcx Snofx Apwskr - Flexible shredding concept with various application packages - New door and housing design for improved maintenance access - Quick fold-out conveyor system at the push of a button - State-of-the-art monitoring concept - Reduced noise emissions Machine has been overhauled and is immediately available!!!!!

Condition: new, Year of construction: 2025, Economical solutions with short delivery times Conveyor belts suitable for all common screening machines such as Doppstadt SM518 / SM618 / SM620 / SM720 / Terra Select T4-T7, Komptech Max, Mustang and others Conveyor belts suitable for all common shredders such as Doppstadt Bison / Büffel / Mamut, Biopower, AK 430, AK 235, AK 635 and others Dodpfoxmvplsx Apwokr Manufactured according to your specifications: - Unlimited length - Width up to 1800 mm - 2, 3, or 4 material layers - Various profiles - Steel wire quantity: 10cm/ 35 +/-1 - in various material thicknesses Conveyor belts of the highest quality

Year of construction: 2018, condition: like new (used), machine/vehicle number: 228240C0016, We offer this like-new, Delta Neu C1X63 belt-driven RDO 30kW high-performance shredder fan, manufactured in 2018. Manufacturer: Delta NEU Model: C1X63 belt-driven RDO 30kW Year of manufacture: 2018 Power: 30 kW Maximum speed: 2700 rpm Voltage: 3×400 V If you have any questions or require further information, please do not hesitate to contact us via message or phone. The high-performance shredder fan is in its original packaging and has never been used. A manual/operating instructions in German is available. Dkjdpfxjzn Ulbo Apwor The machine is located in 59823 Arnsberg.

Year of construction: 2011, condition: good (used), Shredder system, single-shaft shredder, shredder, chipper, cutting mill, single-shaft crusher, rotor mill -Shredder system: completely made of stainless steel, for frozen meat or other -Motor power: 4 kW -Speed: approx. 60 rpm -Number of cutting knives: 10 pieces Dsdsh Di H Dspfx Apwjkr -Dimensions cutting blade: 250 mm -Filling spout 500 x 895 x H480 mm -Dimension 880/1390/H2060 mm -Weight 640 kg

Condition: excellent (used), Year of construction: 2021, operating hours: 2,500 h, functionality: fully functional, overall weight: 1,100 kg, rotor diameter: 700 mm, type of input current: three-phase, input voltage: 400 V, rotational speed (max.): 3,400 rpm, power: 90 kW (122.37 HP), Equipment: rotational speed infinitely variable, This shredding machine is exceptional and highly innovative. The material to be processed is shredded particle by particle in 6 rows of small chambers, while simultaneously the particles are flung against the grinding surface. The combined effect results in a very fine grain size – and it is possible to dry the material being shredded at the same time. Keywords: Turbo mill, impact mill, eddy current mill. Depending on the material, the machine can shred to a particle size of less than 1000 µm to 5 µm. The throughput rate is between 100 and 900 kg/h, depending on the material. The applications range from minerals, industrial products, powder coatings, chemicals, dyes to food and feed. The innovations of the machine are: • the plug-in connections for the wear tools (always in the same place with minimal tolerances) • rotation in both directions – this ensures that the tools are worn down evenly on both sides • conical design – allows the cutting gap to be adjusted precisely to 0.1 mm with only 12 screws. Technical data: • Drive power 90 kW – frequency converter (FU) is essential – frame size 90 kW with 150% overload for 60 seconds. Djdpjzl Shzofx Apwskr • Speed up to 125 m/s • Tools: Rotor and stator made of hard metal, available in various degrees of hardness; ceramics are also possible. • Machine monitoring via bearing temperature measurement and vibration measurement included. • Control panel is not included. The machine was in operation at an R&D center in Israel. Since the company now operates a production facility in Europe, the R&D center is being closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production plant in Europe.

Condition: new, Year of construction: 2025, power: 60 kW (81.58 HP), ALL-IN-ONE Shredding System – WT3080 30 kW + PC3280R 22 kW + Big-Bag Station GrabTrade has specialized in the sale of machinery and complete technological solutions for the recycling industry for many years. We are an official representative of 3E Machinery in Poland. We offer new and used shredders, granulators and complete recycling systems. We offer a new, compact ALL-IN-ONE shredding and granulating system, combining a WT3080 single-shaft shredder with hydraulic pusher, a PC3280R knife granulator, and a complete Big-Bag material collection station with a 5.5 kW transport fan and two Big-Bag filling positions. The system combines pre-shredding and fine granulation in one compact installation. The WT3080 is installed directly above the PC3280R granulator, allowing the pre-shredded material to be transferred directly into the granulator for the second stage of size reduction. SYSTEM CONFIGURATION: 1. WT3080 – Single-Shaft Shredder with Hydraulic Pusher Main motor power: 30 kW Hydraulic motor: 2.2 kW Rotor length: 800 mm Rotor diameter: 300 mm Rotor speed: 83 rpm Rotor knives: 42 + 4 pcs. Fixed knives: 2/4 pcs. Standard screen perforation: 40 mm Cutting chamber: 1,200 × 800 mm Weight: approx. 2,400 kg The hydraulic pusher automatically feeds material towards the cutting rotor, ensuring stable and efficient operation even with bulky and irregular waste. 2. PC3280R – Knife Granulator Motor power: 22 kW Rotor length: 800 mm Rotor diameter: 320 mm Cutting chamber: 834 × 414 mm V-type rotor: 3 × 2 rotating knives Fixed knives: 2 × 2 Standard screen perforation: 12 mm The PC3280R performs the second stage of the process, reducing the pre-shredded material to a significantly smaller and more uniform final fraction. Dkodpov I S T Tsfx Apwjr 3. Complete Big-Bag Material Collection Station Transport fan: 5.5 kW Material transport system after the granulator Cyclone Complete piping system Big-Bag supporting structure Two Big-Bag filling positions The transport fan transfers the ground material from the granulator to the Big-Bag station, providing an efficient and convenient system for collecting the final regrind. APPLICATIONS: The ALL-IN-ONE system is suitable for processing various materials, including: PP, PE, HDPE and LDPE plastics, plastic lumps and purgings, plastic pipes and profiles, plastic crates and containers, injection molding waste, film waste, cable waste, paper and cardboard, wood waste, textile waste, Big-Bags, various industrial and production waste. The main advantage of the system is its compact design and complete two-stage shredding process – the WT3080 performs preliminary shredding, while the PC3280R granulator reduces the material to the required final fraction. The processed material is then pneumatically transported directly to the two-position Big-Bag station. This configuration follows the principle used in GrabTrade complete crushing lines: pre-shredder → knife granulator → transport fan → Big-Bag collection station. MAIN ADVANTAGES: Complete ALL-IN-ONE system Two-stage shredding and granulation Compact construction – reduced installation space Hydraulic material pusher 30 kW pre-shredder 22 kW knife granulator 5.5 kW pneumatic transport fan Two Big-Bag filling positions

Condition: new, Year of construction: 2025, power: 60 kW (81.58 HP), ALL-IN-ONE Shredding System – WT3080 30 kW + PC3280R 22 kW + Big-Bag Station GrabTrade has been specializing in the sale of machinery and complete technological solutions for the recycling industry for many years. We are an official representative of 3E Machinery in Poland. We offer new and used shredders, granulators, and complete recycling systems. We offer a new, compact ALL-IN-ONE shredding and granulating system, combining a WT3080 single-shaft shredder with hydraulic pusher, a PC3280R knife granulator, and a complete Big-Bag material collection station with a 5.5 kW transport fan and two Big-Bag filling positions. The system combines pre-shredding and fine granulation in one compact installation. The WT3080 is installed directly above the PC3280R granulator, allowing the pre-shredded material to be transferred directly into the granulator for the second stage of size reduction. SYSTEM CONFIGURATION: 1. WT3080 – Single-Shaft Shredder with Hydraulic Pusher Main motor power: 30 kW Hydraulic motor: 2.2 kW Rotor length: 800 mm Rotor diameter: 300 mm Rotor speed: 83 rpm Rotor knives: 42 + 4 pcs. Fixed knives: 2/4 pcs. Standard screen perforation: 40 mm Cutting chamber: 1,200 × 800 mm Weight: approx. 2,400 kg The hydraulic pusher automatically feeds material towards the cutting rotor, ensuring stable and efficient operation even with bulky and irregular waste. 2. PC3280R – Knife Granulator Motor power: 22 kW Rotor length: 800 mm Rotor diameter: 320 mm Cutting chamber: 834 × 414 mm V-type rotor: 3 × 2 rotating knives Dkjdpfjv I Tuxex Apwjr Fixed knives: 2 × 2 Standard screen perforation: 12 mm The PC3280R performs the second stage of the process, reducing the pre-shredded material to a significantly smaller and more uniform final fraction. 3. Complete Big-Bag Material Collection Station Transport fan: 5.5 kW Material transport system after the granulator Cyclone Complete piping system Big-Bag supporting structure Two Big-Bag filling positions The transport fan transfers the ground material from the granulator to the Big-Bag station, providing an efficient and convenient system for collecting the final regrind. APPLICATIONS: The ALL-IN-ONE system is suitable for processing various materials, including: PP, PE, HDPE, and LDPE plastics, plastic lumps and purgings, plastic pipes and profiles, plastic crates and containers, injection molding waste, film waste, cable waste, paper and cardboard, wood waste, textile waste, Big-Bags, various industrial and production waste. The main advantage of the system is its compact design and complete two-stage shredding process – the WT3080 performs preliminary shredding, while the PC3280R granulator reduces the material to the required final fraction. The processed material is then pneumatically transported directly to the two-position Big-Bag station. This configuration follows the principle used in GrabTrade complete crushing lines: pre-shredder → knife granulator → transport fan → Big-Bag collection station. MAIN ADVANTAGES: Complete ALL-IN-ONE system Two-stage shredding and granulation Compact construction – reduced installation space Hydraulic material pusher 30 kW pre-shredder 22 kW knife granulator 5.5 kW pneumatic transport fan Two Big-Bag filling positions

Year of construction: 2025, condition: new, ALL-IN-ONE Shredding System – WT3080 30 kW + PC3280R 22 kW + Big-Bag Station GrabTrade has been specializing in the sale of machinery and complete technological solutions for the recycling industry for many years. We are an official representative of 3E Machinery in Poland. We offer new and used shredders, granulators, and complete recycling systems. Djdpfx Aev I S U Ropwekr We offer a new, compact ALL-IN-ONE shredding and granulating system, combining a WT3080 single-shaft shredder with a hydraulic pusher, a PC3280R knife granulator, and a complete Big-Bag material collection station with a 5.5 kW transport fan and two Big-Bag filling positions. The system combines pre-shredding and fine granulation in a single, compact installation. The WT3080 is installed directly above the PC3280R granulator, allowing the pre-shredded material to be transferred directly into the granulator for the second stage of size reduction. SYSTEM CONFIGURATION: 1. WT3080 – Single-Shaft Shredder with Hydraulic Pusher Main motor power: 30 kW Hydraulic motor: 2.2 kW Rotor length: 800 mm Rotor diameter: 300 mm Rotor speed: 83 rpm Rotor knives: 42 + 4 pcs. Fixed knives: 2/4 pcs. Standard screen perforation: 40 mm Cutting chamber: 1,200 × 800 mm Weight: approx. 2,400 kg The hydraulic pusher automatically feeds material towards the cutting rotor, ensuring stable and efficient operation even with bulky and irregular waste. 2. PC3280R – Knife Granulator Motor power: 22 kW Rotor length: 800 mm Rotor diameter: 320 mm Cutting chamber: 834 × 414 mm V-type rotor: 3 × 2 rotating knives Fixed knives: 2 × 2 Standard screen perforation: 12 mm The PC3280R performs the second stage of the process, reducing the pre-shredded material to a significantly smaller and more uniform final fraction. 3. Complete Big-Bag Material Collection Station Transport fan: 5.5 kW Material transport system after the granulator Cyclone Complete piping system Big-Bag supporting structure Two Big-Bag filling positions The transport fan transfers the ground material from the granulator to the Big-Bag station, providing an efficient and convenient system for collecting the final regrind. APPLICATIONS: The ALL-IN-ONE system is suitable for processing various materials, including: PP, PE, HDPE, and LDPE plastics, plastic lumps and purgings, plastic pipes and profiles, plastic crates and containers, injection molding waste, film waste, cable waste, paper and cardboard, wood waste, textile waste, Big-Bags, various industrial and production waste. The main advantage of the system is its compact design and complete two-stage shredding process – the WT3080 performs preliminary shredding, while the PC3280R granulator reduces the material to the required final fraction. The processed material is then pneumatically transported directly to the two-position Big-Bag station. This configuration follows the principle used in GrabTrade complete crushing lines: pre-shredder → knife granulator → transport fan → Big-Bag collection station. MAIN ADVANTAGES: Complete ALL-IN-ONE system Two-stage shredding and granulation Compact construction – reduced installation space Hydraulic material pusher 30 kW pre-shredder 22 kW knife granulator 5.5 kW pneumatic transport fan Two Big-Bag filling positions

Condition: ready for operation (used), Year of construction: 2021, operating hours: 200 h, functionality: fully functional, machine/vehicle number: 34, fuel tank capacity: 300 l, conveyor belt length: 6,900 mm, Only 200 operating hours! TECHNICAL DETAILS Undercarriage track: 400 mm with 3 grousers Rear belt: 6.9 m Shredding system: Size L (8 teeth) Dsdpszcd Aasfx Apwekr MACHINE DETAILS Additional hydraulic connection: 70 l/min Engine: Cat C7.1, 205 kW Fuel tank: 300 L Permissible total weight: 16,300 kg EQUIPMENT 24 V electrical control system Large radio remote control, complete Easy-to-maintain engine compartment with LED light Folding hopper with distance sensor and automatic control Hydraulically reversible fan wheel Audible start-up warning Tracked undercarriage with 2 travel speeds Frame for overband magnet Rubber quick-change pads Overband magnet Roller quick-change system on the roller Roller quick-change system on the machine Watering system LED work lights Additional electric pump for operation when the engine is stopped

Condition: good (used), Year of construction: 2022, operating hours: 710 h, functionality: unexamined, Equipment: Methor chain basic package without shredding system - Crawler chassis including 2 driving speeds - Chassis chain 400mm 3-bar - Additional hydraulic connection 70 l/min - 24-V electric control - Large radio remote control complete - Maintenance-friendly engine compartment with LED light Dksdpfx Apovrz Rvewsr - Folding funnel with path sensor and automatic control - Hydraulically reversible fan wheel - Acoustic start-up warning - Paint finish: RAL 2011 deep orange Special equipment: Shredding system size L (8 teeth) Engine Cat C7.1, 205 kW Rear conveyor 6.9 m Frame for overband magnet Overband magnet Irrigation

Condition: used, Year of construction: 2021, operating hours: 3,304 h, functionality: fully functional, Basic Package AK 640 SA Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm Semi-trailer chassis with 3 axles, road approval for 80 km/h Brake system incl. ABS and lighting according to EU directive Tyres 385/65 R22.5 Permissible total weight 32,000 kg Hydraulically adjustable support legs Splash protection (internal and lateral mudguards) Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm, complies with EUROMOT V emission standard Additional hydraulic connection 20 l/min Load-dependent control of material feed incl. automatic scraper floor reversal Separate drive for feed roller and scraper floor (twin drive) Fuel tank 2 x 450 litres Feed roller: length 1,690 mm, diameter 510 mm, with attached tooth segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips Standard: Flail tip "Streusel plus" Impact plate with teeth Centrally positioned wear strips Electric pump for actuating cylinder functions (e.g., raising/lowering support legs and opening/closing rear hopper, folding/unfolding rear conveyor, releasing drive system) when the engine is off 24 V electrical control Separate control box at rear of machine Hydraulically foldable fine shredding basket Multimesh (mesh size from 30 to 280 mm, gradations upon request) incl. one-piece rear flap Rear conveyor: belt length 7,500 mm, belt width 1,500 mm, discharge height 5,200 mm, hydraulically foldable and lowerable from 39° to 30°, incl. anti-magnetic central section Under belt: belt length 3,800 mm, belt width 1,400 mm Moistening device for external water connection Scraper floor with 71 slats Wear protection in the drum section Reinforcement plates on the infeed hopper (wear-resistant steel) on both sides for side wall Complete radio remote control Fire extinguisher Acoustic start-up warning Doppstadt telematics system Paintwork: RAL 2011 deep orange Additional Equipment: Hydraulic drive Scraper floor chain lubrication NEODYM overband magnet Frame for overband magnet Central lubrication Engine compartment protective plate Lighting package: engine compartment and rear conveyor Watering system Dkedexx Tigspfx Apwsr Delivery date to be arranged Available from 06/2026

Condition: ready for operation (used), Year of construction: 2008, operating hours: 11,655 h, functionality: fully functional, machine/vehicle number: 11421, COMPLETE CONFIDENTIAL DOCUMENTS SHREDDING & BALLING PLANT Built by: - sorting table - infeed belt conveyor 8000x1000 mm; including infeed belt conveyor - VECOPLAN shredder VAZ1300MK; includes screen according to actual confidential shredding DIN norm Dodpfozhu Atsx Apwekr - Outfeed combined screw and chain conveyor, conveying to the press baler - press baler IMABE H-80/50 - Dust exhaust & filtering system - Electrical cabinet for fully authomatic operation Includes: - Full internal cabling - Machines revised with new wear parts for the shredder - Dismantled - Loading into trucks