Used Universal Shredder for sale (4,418)

Condition: used, Year of construction: 2014, functionality: fully functional, Single-shaft machine. Dimensions of the feed hopper: 1300 x 1400 mm. Hydraulic pusher with adjustable pressure and speed, depending on the power consumption of the rotating drum. Drive via gear motor with V-belt. Robust rotor made of certified construction steel. Rotor width: 1300 mm. Hopper length: 1400 mm. Rotor diameter: 368 mm. Main motor power: 30 kW. Teeth and counter-blades made from wear-resistant material. Replaceable reversible blades. Codpfxjx Anq He Afnogn Dimensions of reversible blades: 40x40x20 mm. Replaceable screen basket. Total weight: approx. 3,100 kg. Supply voltage: 380 V – 50 Hz.

Year of construction: 2014, condition: repair required (used), functionality: fully functional, The machine has been idle unused for a few years now, so it needs maintenance before commissioning, which should be the responsibility of the buyer. Cjdjtu U Ebopfx Afnegn

Condition: used, 72″ x .187″ x 20,000Lb Universal Slitting Line Material Width: 12″ – 72″ Material Thickness: .015″ – .187″ Coil Weight: 20,000Lb Coil ID: 20″ Coil OD: 72″ Direction: Left to Right Entry Floor Standing Coil Car L-Type Design Hydraulic Lift & Traverse Mandrel Uncoiler Powered Hold-Down Roll Hydraulic Expansion Air Cooling Brake Sliding Base Hydraulic Peeling Table Slitting Head Arbor Diameter: 7″ Powered Arbor Adjustment 100HP DC Motor Knives & Tooling Recoiler Powered Push-Off Hydraulic Over-Arm Separator Hydraulic Expansion 100HP DC Motor Exit 2-Arm Turnstile Arm Width: 72″ Powered Rotation Cjdpfx Afsihf Twjnsgn Complete Slitter with Electrics, Hydraulics, Controls, Tooling

Condition: like new (used), Year of construction: 2022, operating hours: 700 h, functionality: fully functional, overall weight: 50 kg, load capacity: 12 kg, arm reach: 1,300 mm, repeat accuracy: 0.01 mm, Universal Robots UR10e – As good as new – Only 700 operating hours For sale: a Universal Robots UR10e cobot in excellent condition. This robot has only been in use at our facility for six months for testing purposes and has seen very limited operation. Total powered-on hours: approx. 700 hours (± 26 days) Actual productive hours: maximum 100 hours Cjdeyhqf Eepfx Afnjgn Technically and visually in perfect condition Equipped with the latest software version: Polyscope 5.25 The robot has always been used in a clean test environment and handled with great care. There is no production-related wear. This is, in fact, an almost new UR10e with very minimal usage. Please note: the original packaging is no longer available, but the set is otherwise complete and fully operational. The UR10e is renowned for its high precision, flexibility, and easy integration into various automation applications. With a payload of 12.5 kg and a reach of 1300 mm, this cobot is highly versatile in both production and testing environments. An excellent opportunity to acquire an almost new UR10e at an attractive price. Transport can be arranged at additional cost.

Condition: ready for operation (used), Year of construction: 2018, overall weight: 28,900 kg, number of axes: 6, This 6-axis Universal Robots ur10 cb3.1 was manufactured in 2018, featuring a payload capacity of 10 kg and a reach of 1300 mm. It includes a control cabinet with dimensions 475x423x268 mm, supports TCP/IP communication, and operates with a power consumption of approximately 350 W. Ideal for tasks requiring precision and flexibility. Contact us for more information about this machine. • Payload: 10 kg • Reach/working radius: 1300 mm • Axes/joints: 6 swivel joints • Joint rotation: ±360° on all joints • Joint speeds: foot/shoulder 120°/s; elbow and wrist 1–3: 180°/s • Tool speed (TCP): approx. 1 m/s • Repeatability: ±0.1 mm Cgsdpfx Afox I S Sbjnon • Footprint: Ø190 mm • Control cabinet dimensions (W x H x D): 475 x 423 x 268 mm • I/O connections: control cabinet and tool interface • Digital I/O: 16 DI, 6 DO • Analog I/O: 2 AI, 2 AO • I/O power supply: 24 V 2 A (control cabinet); 12 V/24 V 600 mA (tool interface) • Communication: TCP/IP 100 Mbit (IEEE 802.3u, 100BASE-TX), Ethernet port, Modbus TCP • Programming: PolyScope graphical UI on touchscreen • Noise level: low • Protection class: IP54 • Collaborative safety: 15 advanced safety features • Standards: EN ISO 13849:2008 PL d; EN ISO 10218-1:2011, section 5.4.3 • Materials: aluminum, PP plastic • Operating temperature: 0–50 °C ambient • Power supply: 100–240 VAC, 50–60 Hz • Power consumption: approx. 350 W • Cabling lengths: robot–control cabinet 6 m; touchscreen–control cabinet 4.5 m Additional equipment • Control cabinet • 12" touchscreen HMI with mounting bracket • Cabling set: • 6 m cable between robot and control cabinet • 4.5 m cable between touchscreen and control cabinet

Condition: ready for operation (used), Year of construction: 2018, operating hours: 1,224 h, number of axes: 6, This 6-axis Universal Robots UR5 CB3.1 was manufactured in 2018. A versatile robot arm with a working radius of 850 mm and a payload capacity of 5 kg. Ideal for tasks requiring precision and efficiency. If you are looking to get high-quality robotic capabilities, consider the Universal Robots UR5 CB3.1 machine we have for sale. Contact us for more information. Csdpex D Hb Tofx Afnjgn Machine Benefits Technical Machine Benefits • Working radius: 850 mm • Repeatability: 0. 1 mm • Control unit included • With 3fg15 gripper onrobot • Electric, flexible three-finger gripper with large stroke • Payload for form-fit gripping: 15 kg • Large stroke up to 150 mm • Gripping force: 10–240 n • Gripper weight: 1. 15 kg Extra Information Machine still under power

Condition: excellent (used), For sale: precision measuring instrument UNIVERSAL CONCENTRICITY GAGE, manufactured in the USA, designed for measuring concentricity, runout, straightness, and inspection of rotating components. The set comes complete with a Blankenhorn 0.01 mm or Käfer 0.01 mm dial gauge (Made in Germany). Features a stable base, precise guides, and a holder with micrometric adjustment. The technical condition is very good – the equipment is fully operational, sourced from a German quality control department. Technical data: • Manufacturer: Universal Gage Co., USA • Model: Universal Concentricity Gage • Accuracy: 0.01 mm • Measuring range: approx. 0–100 mm • Gauge: Blankenhorn / Käfer – Made in Germany • Condition: used, functional, very good Cgjdpfxsxtwxue Afnon

Condition: like new (used), Year of construction: 2019, operating hours: 40 h, functionality: fully functional, machine/vehicle number: 201795000000, overall weight: 33 kg, load capacity: 12 kg, arm reach: 1,300 mm, pivoting range: 360 °, Equipment: documentation/manual, Please feel free to contact us for further information. Cgedpfx Aoyhdzmofnon

Condition: ready for operation (used), Year of construction: 2018, operating hours: 400 h, General Data Machine weight 34 kg This 6-axis Universal Robots UR10e cell was manufactured in 2018. It features a load capacity of 10 kg and a range of 1300 mm. Weighing 33.5 kg, this robot arm is designed for tasks requiring precision and flexibility. Consider the opportunity to buy this Universal Robots UR10e cell. Contact us for more information. Codpfx Afjx Tkbfjnogn Application Types Robotics

Condition: excellent (used), Reach: 850 mm Payload: 5 kg Robot weight: 18.4 kg Protection class: IP54 Included: - Touchscreen tablet Codpjwtp Tyefx Afnegn - Robot arm - Robot controller QUANTITY: 2 ROBOTS, PRICE PER UNIT Year: 2018 Reach: 850 mm Payload: 5 kg Robot weight: 18.5 kg Number of axes: 6 Gripper: included Control: touchscreen tablet + controller The price includes only the robot arm with the controller and control cabinet, excluding any additional equipment shown in the photos.

Condition: excellent (used), Year of construction: 2019, Automatic workstation with robot UNIVERSAL UR10 Conveyor belt: total length approx. 200 cm UNIVERSAL UR10 industrial robot: Year of construction: 2019 Serial number: 2019301077 Maximum payload: 10 kg Maximum boom length: 1300 mm Weight: approx. 20 kg Equipment: teach terminal, machine housing Codpfevuzztjx Afnegn

Condition: excellent (used), Model: UR-6-85-5-A Serial number: 2011203044 Year of manufacture: 2011 Weight: 17.8 kg Cjdpfxswu Dnho Afnogn Maximum load capacity: 5 kg Country of manufacture: Denmark

Condition: excellent (used), Reach: 1300 mm Payload: 12.5 kg Weight: 33.5 kg Type: MSIP-REM-URK-UR10 Codpfx Aew N N Dcsfnjgn Year of manufacture: 2018 Serial number: S300711 Welding machine Lorch S5 RoboMIG XT Cobot Welding current: 400 A.

Condition: excellent (used), Year of manufacture: 2018 Reach: 1300 mm Payload: 10 kg Robot weight: 28.9 kg Repeatability: ±0.1 mm Gripper: Schunk RH 907 Force sensor joint: AXIA80-ZC22 Software for controlling the above-mentioned devices and cameras (cameras not available) Codpswtp Tmefx Afnsgn Control: handheld terminal + control cabinet Table not included

Condition: excellent (used), Model: UR5 Cgjdowu Dr Tjpfx Afnon Year of production: 2012/2013/2014 Weight: 18.4 kg Maximum payload: 5 kg Reach: 850 mm Quantity: 4 units

Condition: like new (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 20246801576, load capacity: 20 kg, arm reach: 1,750 mm, controller manufacturer: Universal Robots, controller model: CB5, Equipment: documentation/manual, The Universal Robots UR20 is a collaborative industrial robot with a payload capacity of up to 20 kg and a reach of 1750 mm, delivering maximum performance in a compact footprint. Its compact design, precise motion control, and simple programming make it ideal for demanding automation tasks such as palletizing, machine tending, and welding applications. Cgedjyf Ei Hepfx Afnen Used exclusively in our lab for experience gathering. The robot has never been used in industrial production. Delivery includes control unit and operator panel.

Condition: excellent (used), Year of construction: 2016, Axial piston pump, hydraulic pump, oil pump, gear pump, screw pump -Manufacturer: Universal Hydraulics, hydraulic pump screw pump -Type: HSSPA-3/26.6-AVR-V4-01 -Motor: AC motors 3 kW -Dimensions: 760/250/H300 mm Csdpfx Afevt Sclensgn -Weight: 39 kg

Condition: as good as new (ex-display), Year of construction: 2019, functionality: fully functional, overall weight: 33 kg, load capacity: 16 kg, arm reach: 900 mm, repeat accuracy: 0.05 mm, The robot is still in its original packaging and has been unused since purchase. Model UR16e – year of manufacture 2019 – as good as new – demonstration unit – with original packaging. In addition, we have had a protective cover made for blasting applications. Robot weight: 33 kg Payload: 16 kg Reach: 90 cm Protection class: IP54 Average power consumption: 585 W Repeatability: ± 0.05 mm Linear speeds: 1 m/s Force sensor: integrated Power supply cable length: 4.5 m Arm to control box cable length: 6 m Teach pendant (control tablet) cable length: 4.5 m Csdpfx Ajx Dir Ijfnsgn

Condition: good (used), Here we offer you a used shelf connector for sale. Included in delivery: 01x shelf connectors usedMaterial colour: sendzimir galvanizedShelf spacing: approx. 150 mmProfile: approx. 35 x 25 mmWeight/piece: approx. 0.214 kg /piece 02x hexagon bolts, M10 x 3502x hexagon nut, M1002x washers, M10 Csdpfed Tyhvsx Afnegn

Condition: excellent (used), Year of construction: 2009, operating hours: 100 h, functionality: fully functional, machine/vehicle number: SKU 102781, overall weight: 1,300 kg, power: 4 kW (5.44 HP), space requirement width: 1,350 mm, space requirement length: 1,520 mm, space requirement height: 1,400 mm, Equipment: rotational speed infinitely variable, The special design of the Multi Grind makes it possible to combine the functions of cylindrical, surface, and tool grinding in a single machine. During external cylindrical grinding, the workpiece can be clamped on one side or supported between centers in the robust tailstock. An internal grinding attachment can also be mounted on the headstock, and even light surface grinding tasks are possible with this model. In tool grinding operations, the Multi Grind allows for precise sharpening of the cutting edges on a wide variety of tools – making it particularly versatile in its application. - External and internal cylindrical grinding - Surface grinding - Tool grinding Cedpfx Ajxqgi Djfnjgn - Hydraulic table feed - Extensive accessories

Condition: as good as new (ex-display), Year of construction: 2022, operating hours: 20 h, Shredder typ PYTHON 1300, with 7 KW electricmotor, 400V 50Hz• • Hopperopening 1300 x 700mm • Main dimensions L 2100 x B 850 x H 1600mm • Outlet opening ca 400x 100mm • Height under output ca 400mm • Electric cabinet, mainswitch, selector switch aut/man. ON/OFF switch, Emergency Push button • Easy handling/ transport by forktruck or lifting eyes • Weight ca 1100 kg • Machine Manual incl.. • Paint in RAL 3002 and RAL 7022 • (subject to technical changes) • CE certified and “Made in Holland” Cjdjf N Nk Hepfx Afnegn

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, Compact Shredder typ PYTHON-XL 1600, with 15 KW electricmotor, 400V 50Hz• • Electric motorreductor 15KW, 400V, 3phs, 50Hz 40% MORE torque compare PYTHON 1600 Standard • Opening 1600 x 1000 mm • Main dimensions L 2700 x B 1400 x H 2600mm • Discharge opening 400x 100mm • Height discharge opening ca 1000mm Csdpfx Afjvx Hkzjnogn • Electrical control box with INVERTER, main switch, selector switch on / off switch and emergency stop • Easily moved either with forklift or by means of lifting eyes • Weight approx. 2700 kg • Comprehensive machine manual • Finishing in RAL 3002 and RAL 7022 • (Subject to technical changes) • CE certified and "Made in Holland"

Condition: new, Year of construction: 2025, operating hours: 1 h, Hackschnitzel oder Holzspänen produzieren mit PYTHON-G. Der Nachzerkleinerer Python-G wird in Kombination mit dem PYTHON betrieben. 2-Stufen Zerkleinerung. Die Endfraktion des Vorbrechers PYTHON wird direkt in den Materialeinlauf der Nachzerkleinerer PYTHON-G geführt. Die Maschinen werden dann in L-Form angeordnet • Antrieb mit Motorreduktor 15 kW, 400V, 3phs, 50Hz • Rotor Durchmesser ca 350mm x 1200mm • Rotormesser 40x40mm concave • Anzahl Messer ca 25 ( optional 50 Stk.) • Haubtabmessungen L 2100 x B 850 x H 1000mm • Sieb B 450mm x L 1200mm ( Fläche 0,85m2 ) • Siebloch Grösze nach Wahl ( 25mm/30mm/40mm/50mm ) Cedpfx Aoibnd Eofnegn • Gewicht ca. 1350 kg • "Made in Holland"

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, Shredder typ PYTHON 1600, with 11 KW electricmotor, 400V 50Hz• • Hopperopening 1600 x 700mm • Main dimensions L 2400 x B 850 x H 1600mm • Outlet opening ca 400x 140mm • Height under output ca 400mm • Electric cabinet, mainswitch, selector switch aut/man. ON/OFF switch, Emergency Push button • Easy handling/ transport by forktruck or lifting eyes • Weight ca 1300 kg • Machine Manual incl.. • Paint in RAL 3002 and RAL 7022 • (subject to technical changes) Codpjf Sgcbofx Afnegn • CE certified and “Made in Holland”

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, Shredder typ PYTHON 1600, with 11 KW electricmotor, 400V 50Hz• • Hopperopening 1600 x 700mm • Main dimensions L 2300 x B 850 x H 1600mm • Outlet opening ca 400x 140mm • Height under output ca 400mm • Electric cabinet, mainswitch, selector switch aut/man. ON/OFF switch, Emergency Push button • Easy handling/ transport by forktruck or lifting eyes • Weight ca 1800 kg Cedpfxef N Narj Afnsgn • Machine Manual incl.. • Paint in RAL 3002 and RAL 7022 • (subject to technical changes) • CE certified and “Made in Holland”