Used Universal Shredder for sale (4,281)

Condition: good (used), Cardan shaft, universal joint, universal joint with flange, drive shaft, cardan joint Dkjdpfx Ajyzfzvsffjk -Cardan shaft: with universal joint -Type: Length 250 mm -Flange Ø 75 mm -Bolt circle: Ø 62 x 6 mm -Quantity: 2x cardan shafts available -Price: per piece -Dimensions: Ø 75 x 250 mm -Weight: 2.3 kg/pc.

Condition: used, Year of construction: 2012, x-travel 800 mm y-travel 800 mm z-travel 600 mm Control Heidenhain iTNC 530 spindle tunring speed 30 - 8.000 U/min spindle drive 25 kW torque 244 Nm tool taper SK 40 number of tool places 30+190 Pos. A-axis ° C-Axis 360 ° table surface area 800 x 630 mm table load 600 kg rapid traverse ( x / y / z ) 40 m/min auto power on hours ca. 79.968 h spindle hours ca. 22.465 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical Features & Accessories: - Additional magazine - Chip conveyor - Infinitely variable speed control - 5-axis simultaneous machining - 70 bar internal coolant supply - Flushing nozzle Dksdpfsyzt Dlex Affsk - Workpiece measuring probe - Blum laser tool control - Heidenhain 410 electronic handwheel Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: used, condition Defekt/Ersatzteilträger manufacture Mikron type HSM 400 U Djdpfeyzt A Uex Affokk The machine is defective and is being sold for spare parts. Accessories, tools, and clamping devices shown are only included if explicitly stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: good (used), Cardan shaft, universal joint, universal joint with flange, drive shaft, cardan joint -Cardan shaft: with universal joint -Type: Length 240 mm -Flange: Ø 75 mm Dkedpfxsyzfxho Affsk -Bolt circle: Ø 62 x 6 mm -Dimensions: 240/75/H75 mm -Weight: 2.2 kg

Condition: good (used), Cardan shaft, universal joint, universal joint with flange, drive shaft, cardan joint -Cardan shaft: with universal joint -Type: Length 290 mm -Flange: Ø 100 mm -Bolt circle: Ø 83 x 9 mm -Dimensions: 290/100/H100 mm Dodpfx Afsyzfu Ajfokk -Weight: 6.1 kg

Year of construction: 1998, condition: used, ID No.: F40205, T-slot clamping table: approx. 4,200 x 960 mm; HEIDENHAIN control; chip conveyor KNOLL 200 S-1/50, year of manufacture: 1997, serial no.: 33897; belt filter KNOLL VRF 150, year of manufacture: 1998; hydraulic unit; control cabinet; cooling system BKW DL32V/4519-1KKSRZP, total machine length: approx. 10 linear meters. Dodpfx Afsyzthqsfskk

Condition: like new (used), Year of construction: 2018, operating hours: 1,294 h, functionality: fully functional, Röders RXP 601 DSH – 5-Axis High-Precision Milling and Grinding Center Machine hours: 1294 (5. March 2026) General Machine Data Manufacturer: Röders TEC GmbH (Germany) Machine Type: 5-Axis CNC Milling and Grinding Center Model: RXP 601 DSH Design: Vertical High-Speed ??Machine Axis System: X / Y / Z + A / C Drive System: Direct drives in all linear and rotary axes Measuring Systems: Optical direct measuring systems in all axes Thermal Management: Active temperature stabilization of all main components Workspace & Mechanics X-axis travel: 540 mm Y-axis travel: 635 mm Z-axis travel: 400 mm A-axis swivel range: ±115° C-axis continuous rotation (360°) Max. workpiece weight: up to 200 kg Machine weight: approx. 10,200 kg Space requirement (L×W×H): approx. 2,950 × 2,950 × 3,100 mm Djdsyziacjpfx Affjkk Spindle system Spindle manufacturer: Levicron Spindle type: High-precision air-bearing milling and grinding spindle Bearing: Air bearing, operating pressure up to 10 bar Tool holder: HSK 25 (HSK-E depending on the version) Application: High-speed milling and precision grinding Thermal properties: Virtually frictionless, minimal heat input Grinding equipment: • Integrated grinding function in the CNC control • Optimized axis control for grinding processes • Vacuum Z-axis compensation to relieve stress on the Z-axis • Thermally stabilized Z-axis for maximum dimensional accuracy • Suitable for coordinate, profile, and fine grinding Peripheral systems: Extraction: Industrial extraction system for milling and grinding operations Oil treatment: Filter and treatment system for Grinding oil Cooling lubricant Temperature control Chip disposal Oil-based grinding medium Active media temperature control Integrated screw conveyors All information provided to the best of our knowledge, subject to technical modifications.

Condition: used, Year of construction: 1993, Station 1 Unlatching: Dkedpfxoyzgnqe Affsk Max. sheet thickness: 6 mm steel, 4 mm stainless steel Fixed 90-degree angle with stops Blade length 225 mm Station 2 Cutting Max. cutting width: in one pass 25 mm at 100 mm cutting depth Max. sheet thickness: 4 mm steel Weight: 800 kg

Year of construction: 1989, condition: used, Hermle Universal Milling Machine Dkjdpfx Afsihqatefjk Type UWF 801 working range longitudinal X axis 500 mm transverse y axis 430 mm vertical Z axis 400 mm clamping surface 800 x 220 tool holder SK 40 spindle motor 3 KW quill stroke vertical 80 mm Control TNC 114

Year of construction: 1983, condition: used, Universal tool milling machine Hermle Type UWF 700 year of manufacture 1983 table 700 x 285 mm Dkjdpfxelqx Aze Affok travel X / Y Z 400 / 290 / 380 mm mounting SK 40 spindle speed 40 - 2000 rpm quill stroke 63 mm drive power 2,2 kw Digital display counterholder weight 1500 kg

Condition: repair required (used), Fehlmann Picomax 60 M (5-axis universal milling machine) with Heidenhain TNC 426 Dkedpewmwrdofx Affjk x-axis 500 mm y-axis 350 mm z-axis 610 mm Motor spindle 18,000 rpm Power 10.2 kW 24-position tool changer Weight 3,200 kg with 4 axes SK 30 tools approx. 40 tool holders The machine has the following problems: - Heidenhain 430 control system is defective (booting up is not always possible, crashes during machining)

Year of construction: 1981, condition: used, Make cover Type FP 4 Table: dimensions 1000 x 470 mm longitudinal movement X - axis 700 mm transversal movement Y - axis 400 mm vertical movement Z - axis 450 mm projection spindle 50 450 mm Dkedpfjihp U Dsx Affjk spindle mounting ISO 40 Number of spindle speeds 18 Spindle speed range 31,5 1600 rpm Number of revolutions horizontal spindle 18 pcs. Speed range horizontal spindle 31,5 1600 rpm Weight machine 2000 kg feeds X Y Z axis 18 pcs 10 500 mm/min Accessories milling head with quill Table 1000 x 470 mm

Condition: used, Year of construction: 2006, travel -x axis 500 mm travel -y axis 450 mm travel -z axis 400 mm c-axis 360 b-axis 0 - 108 ° surface area d: 500 x 380 mm control HEIDENHAIN - iTNC530 number of spindle speeds 20 - 18.000 U/min Dsdpoyvkuqjfx Affokk numbers of positions in the tool changer 60 tool taper HSK 63 5-axis simultaneous machining center | DMG - DMU 50 eVo linear equipped with NC swivel rotary table, 60-way tool changer, double gripper, ITC (40 bar) and chip conveyor. Additional equipment: - Infrared probing system Heidenhain TS 640 - Laser tool measurement system - Belt filter system The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DMU50Evo | DMU50 Evo | 50Evo

Condition: used, Year of construction: 1999, Technical details: x-travel: 1250 mm y-travel: 880 mm z-travel: 800 mm control: Heidenhain TNC 430 Dodpjtq Nlcofx Affokk tool change unit: 60 Pos. Tool bore: SK 50 turning speeds: 8000 1/min size of pallet: 1000 x 800 mm total power requirement: 56 kVA weight of the machine ca.: 14,3 t dimensions of the machine ca.: 5,5 x 3 x 3,1 m 5-axis machine with controlled universal milling head (B-axis), 2-palett changer incl. 2 palets, 1000 x 800 mm Production package: - internal coolant supply 40 bar with 900l coolant box (2,25 x 1.3 x 2,2m / 950kg), - chipconveyor (4,85 x 1,2 x 1,75m / 600kg), - ROTOCLEAR, - 3D touchprobe RENISHAW MP 10 - 60 pos. ATC SK 50 - el. handwheel - mech. tool-breakage control, accessories (SK 50 toolholders approx. 100.200 h "machine on", approx. 52.200 h "spindle on", last spindle change in 2020 *

Year of construction: 2005, condition: excellent (used), X-axis travel mm: 700 Y-axis travel mm: 1000 Z-axis travel mm: 500 Number of pallets: 6 Spindle speed rpm: 1 - 18.000 Dkodpjyzhkmsfx Affok Tool holder: HSK-A63 Tool magazine slots: 70 Linear motor drives 2.5 s chip-to-chip tool change 20 m/s² acceleration 120 m/min speed High-dynamic 5-axis machining Weight-optimized kinematics Integrated workpiece changing system

Condition: used, breader suitable for standard and Japanese crumbs and corn flakes all stainless steel mobile adjustable speed belt width 900 mm with extra outfeed belt Dkjdpfx Ajyyxv Djffsk with air knives dimensions (l x w x h) : ± 3.200 x 1.800 x 2.200 mm 2,73 kW

Condition: good (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 15025702504, travel distance X-axis: 2,350 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 520 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, nominal power (apparent): 21 kVA, controller manufacturer: HEIDENHAIN, total height: 2,800 mm, total length: 9,000 mm, total width: 3,200 mm, table width: 500 mm, table length: 700 mm, table load: 310 kg, overall weight: 15,000 kg, spindle speed (max.): 12,000 rpm, mount diameter: 40 mm, input voltage: 400 V, input frequency: 50 Hz, input current: 80 A, control voltage: 220 V, Equipment: chip conveyor, documentation/manual, DECKEL MAHO DMU 70 VL Universal Machining Center - Tool holder: SK 40 - Input increment X/Y/Z: 0.01 mm - Jog mode X/Y/Z: 20 - 2000 mm/min - Linear scale resolution X/Y/Z: 0.001 mm - Position tolerance in X/Y/Z: 0.010 mm - Working area travel X-Axis (without partition): 2350 mm, with partition: 2 x 710 mm - incl. tool changer, 2 x 32 positions - max. tool length from spindle nose: 315 mm - max. tool weight for automatic tool change: 6 kg - max. total tool weight in magazine: 80 kg - required compressed air: approx. 5.5 - 8 bar Worktables: - NC rotary table, 700 x 500 mm - with swivel axis - T-slot spacing: 63 mm - max. table rotation speed: 16.73 rpm - swiveling speed: 14.73 rpm - swivel range: 0 to 180° - input/display increment: 0.001° - weight: approx. 310 kg - one fixed table - dimensions: 1000 x 600 mm - T-slot spacing: 63 mm - number of T-slots: 9/14 H7 - incl. chip conveyor and coolant system Dedpfsym Smbex Affekk Note: the machine can be transported on a truck with up to 2800 mm width! Note: The item must be collected between 21.04. and 30.04.2026 at a yet-to-be-agreed date. FCA D-96257 Marktgraitz – loaded onto truck

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 15025704014, travel distance X-axis: 2,350 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 520 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, nominal power (apparent): 41 kVA, controller manufacturer: HEIDENHAIN, controller model: TNC 426, total height: 2,800 mm, total length: 9,000 mm, total width: 3,200 mm, spindle speed (max.): 18,000 rpm, tool diameter: 40 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, DECKEL MAHO DMU 70 VL Universal Machining Center - Operating voltage: 400 V - Frequency: 50 Hz - Connected load: 41 kVA - Rated current: 80 A - Tool holder: HSK 63 - Input increment X/Y/Z: 0.01 mm - Setup mode X/Y/Z: 20 - 2000 mm/min - Linear encoder resolution X/Y/Z: 0.001 mm - Position tolerance in X/Y/Z: 0.010 mm - Working area travel X-axis (without dividing wall): 2350 mm, with dividing wall: 2 x 710 mm - including tool changer 2 x 32 positions - Max. tool length from spindle nose: 150 mm - Required compressed air: approx. 5.5 - 8 bar - Work tables: 2 x NC rotary table, 700 x 500 mm - with swivel axis - T-slot spacing: 63 mm - Swivel range: 0 to 180° - Input and display increment: 0.001° - Weight: approx. 310 kg Dedpfeym Sd Tsx Affskk - Including all tool holders visible on the photos in the tool changer, as well as chip conveyor and coolant system - Note: The clamping systems on the fixture tables are not included in the scope of delivery. Important: The machine can be transported on a truck up to 2800 mm width! Important: The item must be collected between 21.04. and 30.04.2026 on a binding date to be agreed upon in advance. FCA D-96257 Marktgraitz – loaded onto truck

Condition: good (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 71.255396, travel distance X-axis: 600 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 500 mm, controller model: MILLPLUS, total height: 2,700 mm, total length: 6,000 mm, total width: 4,000 mm, table width: 630 mm, table length: 900 mm, overall weight: 10,000 kg, number of slots in tool magazine: 30, mount diameter: 40 mm, Equipment: chip conveyor, DECKEL MAHO DMU 80 P Universal Machining Center - Operating voltage: 400 V - Frequency: 50 Hz - Rated current: 80 A - Table with 9 T-slots - Tool holder: SK 40 Dkjdpsym Rk Sofx Affek The machine is equipped with a 30-position tool changer, including the tool holders visible in the photos within the tool changer, as well as chip conveyor and coolant system. Note: The machine vice shown on the clamping surface is not included in the scope of delivery! Note: The item must be collected between 21/04 and 30/04/2026 at a bindingly agreed appointment. FCA D-96257 Marktgraitz – loaded onto truck

Condition: used, Year of construction: 1999, Shredder Nazzareno K700 Serial number: 97013 Year of manufacture: 2007 Motor power: 18.5 kW Opening: 740x1400 mm Rotor length: 750 mm Dodpfswh Na Ajx Affekk Screen diameter: 10 mm Includes feeding conveyor Transport dimensions: 3600×1350×1900 mm (L×W×H), Weight: 3500 kg - Year: 1999 - Documentation available: No - CE certificate present: No - Serial number: 97013 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2003, operating hours: 10,120 h, total length: 1,800 mm, total height: 1,700 mm, total width: 1,200 mm, Empty weight: 1.300 kg Dksdpfx Aewh Na Noffjk Price: On request Shredder Untha LR 630 Year of construction 2003 Input opening: 624 x 792 mm Throughput speed: material and sieve dependent Rotor diameter: 248 mm Rotor speed: 86 - 96 rpm Engine power: 15 kW Cutting system: 17 knives Sieve diameter 24mm Transport dimensions 1800*1200*1700mm (L*W*H), Weight 1300kg - Year: 2003 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: LR632318 - Operating hours: 10120 - Transport dimensions: 1800mm x 1200mm x 1700mm (l x w x h) - Transport weight [kg]: 1300kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2017, total length: 2,000 mm, total height: 2,400 mm, total width: 1,350 mm, - Details: - └ Description: Excluding magnet Dkedpfx Afex Dik Refjk - Year: 2017 - Documentation available: No - CE certificate present: No - Serial number: 600 - Main motor power [kW]: 22 - Rotation speed [rpm]: 1475 - Hydraulic unit power [kW]: 3.0 - Oil tank capacity [L]: 48 - Number of shafts [pcs.]: 1 - Opening width [mm]: 600 - Opening length [mm]: 250 - Sieve perforation [mm]: 15 - Number of fixed knives [pcs.]: 20+ - Transport dimensions: 2000mm x 1350mm x 2400mm (l x w x h) - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1991, total length: 6,450 mm, total height: 2,200 mm, total width: 2,200 mm, Komplett mit Förderband und Magnet - Year: 1991 - Documentation available: No - CE certificate present: No - Main motor power [kW]: 45 - Rotation speed [rpm]: 982 - Hydraulic unit power [kW]: 7.5 Dkjdpfjww T U Nox Affjk - Oil tank capacity [L]: 110 - Rotor width [mm]: 1000 - Hydraulic slide present: Yes - Stroke hydraulic slide [mm]: 2300 - Opening width [mm]: 2500 - Opening length [mm]: 3200 - Sieve perforation [mm]: 200 - Number of rotating knives [pcs.]: 1 - Transport dimensions: 6450mm x 2200mm x 2200mm (l x w x h) - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, total length: 1,650 mm, total height: 3,380 mm, total width: 2,600 mm, - Documentation available: No - CE certificate present: No - Main motor power [kW]: 11 - Number of shafts [pcs.]: 1 - Hydraulic slide present: Yes Dedswf El Aspfx Affokk - Opening width [mm]: 1000 - Opening length [mm]: 1200 - Transport dimensions: 1650mm x 2600mm x 3380mm (l x w x h) Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1990, total length: 2,550 mm, total height: 1,600 mm, total width: 1,300 mm, - Year: 1990 - Documentation available: Yes - CE certificate present: No - Serial number: 11584/90 - Main motor power [kW]: 11 - Hydraulic unit power [kW]: 1.1 - Number of shafts [pcs.]: 1 - Opening width [mm]: 800 - Opening length [mm]: 1000 - Sieve perforation [mm]: 20 - Number of fixed knives [pcs.]: 25 - Transport dimensions: 2550mm x 1300mm x 1600mm (l x w x h) - Transport packages [pcs.]: 1 Financial information Dodpowmbcysfx Affjkk VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels