Used Haulick for sale (16)

Condition: used, Year of construction: 1983, pressure 160 t stroke fix 160 mm no. of strokes 30 - 120 /min distance between columns 1190 mm dayligth (stroke and adjustment up) 735 mm column travel -side 600 mm table surface area 1200 x 1000 mm hole in the table 500 x 300 mm table height over floor 900 mm ram surface 1000 x 800 mm ram adjustment 125 mm material width 550 mm material thickness 0 - 6,0 mm Nwodpfx Agevuk E Uozjn material cross-cut 1100 mm² feed length 350 mm power requirement 45,0 kW Weight 25,0 t dimensions of the machine ca. 2,3 x 2,1 x 4,7 mxmxm permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive (PIV), hydraulic overload protection in ram, motoric ram adjustment, pneumatic counterbalance in ram, ram interlocking, centralized lubrication, mechanical pincer feed (Haulick, RS 350/550 SL 90) as is where is, WITHOUT putting into operation

Condition: ready for operation (used), Year of construction: 1977, Available immediately, ex location: Double-column automatic press Haulick und Ross Type RVD 100 Year of manufacture: 1977 Pressing force: 100 tons Table: 880 x 800 mm Table opening: 470 x 140 mm Column clearance: 900 mm Ram stroke: 45 mm Ram adjustment: 0 – 80 mm Stroke rate: 50 – 300 strokes/min Nsdpfx Aexrblcsgzown Installation height: 340 mm Motor power: 15 kW Feed unit Weight: 9 tons Price: EUR 2,750 plus VAT, ex location

Condition: used, Year of construction: 1992, machine/vehicle number: 120 4687, Press capacity: 80 ton Ram stroke adjustable: 4 -60 mm Slide adjustment: 0 - 80 mm Shut height (stroke down, adjustment up): 310 mm Free frontal opening L-R: 800 mm Nwedpfx Aouqc I Aegzsn Table height over floor: 1150 mm Table surface area : 780 x 640 mm Slide area: 800 x 460 mm Hole in table: 690 x 170 mm Number of strokes: 30 - 300 s.p.m. Required power: 21 kW Height over floor approx.: 2900 mm Weight of machine approx.: 12 ton Control: Siemens S5 Standard configuration Roll feeder Type WAV - RDS 2E 1125Material width max. 310 mmMaterial thickness 0,3 - 3 mmMaterial cross section 630 mm2Feeding speed 80 m/minFeeding roll diameter 125 mm 

Condition: ready for operation (used), Punching machine, hole punch, blanking press, eccentric press, Used machine Nsdpexdxbxofx Agzjwn Manufacturer: Haulick + Roos Werkzeugmaschinen GmbH, Pforzheim, Germany Type: RVD 32-540 HS Serial number: 1201847 Year of manufacture: 1985 Pressing force: 320 kN (≈ 32 tons) Stroke rate (speed range): 30 – 1200 strokes/min Drive (motor power): ~18 kW Stroke length: 0 – 40 mm Ram adjustment: 0 – 50 mm Centre hole in ram: Ø 52 mm This is a high-speed eccentric press (HS = High Speed), suitable for pressing thin sheet metal in mass production, for example in the electronics or automotive industries for small components.

Condition: excellent (used), Year of construction: 2015, operating hours: 5,100 h, Power: 4,000 kN Bolster area: 3,000 x 1,400 mm (W x D) Clamping surface table: 2.950 x 1.500mm Clamping surface ram: 2,950 x 1,240 mm Daylight: 600 mm (stroke down and adjustment on top) Frequency: 5 - 100 rpm, infinitely variable Stroke: 20 - 200 mm, automatically adjustable Ram adjustment: 150 mm (motorized) Design: - With servo technology, speed of ram adjustable, possible to pendle - Table - clamping plates divided and manually adjustable - 8-fold sliding guide - motorized oil - central lubrication - automatic ram adjustment - pneumatic ram weight compensation - electromotive stroke adjustment - control Siemens + Fanuc - visualization Siemens Panel PC in mobile desk - tool safety device 8-fold - tool data memory - 2-channel press force measurement - Hydraulic overload protection - T-slots in table and ram - Longitudinal groove for tool centering in ram Nwedpfx Agspvlf Sozen - Anti vibration machine feet - opening in the table Equipped with a complete decoiling line make Lorenz Decoiler Load capacity: 80kN strip width: 20 - 820 mm Inner diameter: 470 - 520 mm Coil - outer diameter 1.800 mm Straightening machine strip width: max. 820 mm Strip thickness: 0,5 - 4,0 mm Straightenable cross section: 1.600mm² Number of rolls: 9 pcs, Ø 65 mm + 2 pcs feeding rolls Speed: 0 - 30 m/min Electronic roll feed Strip width: max. 820 mm Strip thickness: 0.5 - max. 6.0 mm Cross section: max. 2.400 mm² Number of rollers: 2 pcs. Ø 120 mm

Condition: excellent (used), Year of construction: 1995, Press force 320 kN Stroke rate 1,100/min Ram stroke 3-50 mm Ram adjustment 50 mm Drive power 19 kW Nwodpfx Agsxcmkfezjn Table length 760 mm Including soundproof cabin Including control cabinet Including BANDMOTION servo feeder Including KEYENCE camera monitoring Including decoiler Including valid UVV (safety regulations)

Condition: used, Year of construction: 1996, pressure 63 t distance between columns 965 mm stroke 4 - 60 mm no. of strokes 30 - 800 Hub/min dayligth (stroke and adjustment up) 380 mm column travel -side 355 mm table surface area 960 x 640 mm hole in the table 850 x 140 mm table height over floor 1150 mm ram surface 960 x 460 mm power requirement 32,5 kW weight of the machine ca. 13,00 t required space 3,3 x 1,7 x 2,9 m ram adjustment 80 mm Nedpfx Asvut Rgegzswn permitted for automatic mode according to the CE Regulations with infinitely variable drive, pneumatic clutch, semi-automatic stroke adjustment, motoric ram adjustment, mechanical pincer feed type GF 160 can be offered without or with putting into operation in given condition

Condition: used, Eccentric punch press HAULICK + ROOS type RVD 125 double column - eccentric press Machine No. 212560 Year of construction 1981 pressure force 125 ton. table size 880 x 800 mm table opening 470 x 140 mm column width 900 mm column width lateral 415 mm ram stroke 45 mm slide adjustment travel 0-80 mm Installation height on the picture 340 mm Stroke rate 50 to 300 strokes/min. Motor power main drive 22 kW Mains connection 380 volt, 50 Hz - Double connecting rod drive with 4-fold eccentric shaft for off-center ram pressure load - adjacent electrical cabinet - NC roll feed EBU, width 250 mm, year 2003 Nwjdpfx Aohlnzkogzon - adjacent control panel for roll feed - strip running direction from left to right space requirement (press) L x W x H 3000 x 2000 x 3020 mm transport height 2950 mm weight of the press approx. 11 ton.

Condition: excellent (used), Year of construction: 1990, machine/vehicle number: 1203697, Bros. punching press Make: Haulick & Roos Type: RVD 8/800 NS Press with adjacent console: Haulick & Ross RVD 80-800NS Eccentric press with double connecting rod with 4-fold bearing mounted eccentric shaft No: 1203697 YEAR OF MANUFACTURE: 1990 Press force: 800kN Speed: 30-300/min. Drive: 26kW Ram stroke: 4-60mm ram adjustment: 80mm Table: 800x640mm Fold-through hole: 780x60-160mm Table over floor: 1240mm Frame width: 780mm Lateral upright width: 350mm Installation height max. stroke bottom/ram top: 300mm Space required for press (LxWxH): 3200x1700x3000mm Control cabinet (LxWxH): 1800x400x 1900mm Weight: 12.000kg Reel: Eigl 2527-90 Driven: no Straightener with strap loop sensor: Eigl RST W37/300 (2528-90) Max. width: 300mm Max. Thickness: 3mm Njdpfx Agoudn Utezown Number of rolls: 5 Feed rate: Haulick & Roos RS 260/120°/2727 Max. Feed length 260mm Max. Width 260mm Max. Max. thickness 3mm Feed speed 40m/min. Material cross-section up to 800mm?

Condition: excellent (used), Year of construction: 1978, ram adjustment: 590 mm, drop-through hole in table: 100 mm, table length: 590 mm, table width: 500 mm, pressing force: 40 t, Levelling straightner RASTER 12 180/19.150-1 New 1986 incl. Decoiler  Nwjdjuql Hujpfx Agzsn incl. feeder  Capacity Kg: 40000 Table Length: 590mm Table Width: 500mm Hole in table:100mm Ram size: 590 x 380mm Stroke: 8 - 50mm Strokes: 30 - 300Min.

Condition: used, Year of construction: 1976, Force: 160 tons Nwjdpfocna Hfsx Agzjn Windows: 600mm Daylight: 420mm Ram adjustment: 80mm Table size: 1100x1100mm Ram size: 1030x800mm Hole in table: 680x250mm Stroke adjustable: 30-100mm Strokes per Minute: 40-1800 Power requested: 18,5KW, weight: 20 tons, height 3950mm Siemens control, ALBA roll feeder material 400x3mm

Year of construction: 1995, condition: used, pressure 125 t stroke 10-80 mm no. of strokes 240 Hub/min ram - range of adjustment 80 mm table surface area 850x600 mm ram surface 760x550 mm hole in the table 850x130 verstellbar mm Nsdpfx Agolp U Nqjzswn table height 1100 mm tool hole in ram Ø 50 mm total power requirement kW weight of the machine ca. 13 t dimensions of the machine ca. BxTxH: 3000x2000x3300 mm

Condition: used, Year of construction: 1990, pressure 50 t distance between columns 800 mm stroke 4 - 60 mm no. of strokes 30 - 300 Hub/min dayligth (stroke and adjustment up) 400 mm column travel -side 350 mm table surface area 780 x 640 mm hole in the table 690 x 140 mm table height over floor 1150 mm ram surface 800 x 460 mm power requirement 26,0 kW weight of the machine ca. 9,00 t required space 2,4 x 1,7 x 2,9 m ram adjustment 80 mm permitted for automatic mode according to the German Safety Regulations (UVV) Nwodpfx Agovut Huszon with infinitely variable drive, automatic stroke adjustment electronic roll feed (PBK, WV 65-DSM 300P, yom. 2007) can be offered without or with putting into operation in given condition - video at seller's site before dismantling available

Condition: used, Year of construction: 1995, machine/vehicle number: 1830977, pressure:32 t no. of strokes:30 - 1100 Hub/min sheet width:0 - 120 mm table-size:760 x 580 mm feed::SANKYO V76 stroke adjustable from - to:3-50 mm distance between columns (le-ri):800 mm :200 dayligth:235 mm feed length:0 - 76,2 mm hole in the table:670 x 110 mm ram adjustment:50 mm surface area of ram:710 x 410 mm plate thickness:0 - 3 mm band speed:max. 70 m/min control:OP 15 SIEMENS SPS Nsdpfx Agjcxxrlozewn Feeding Angle:165 ° total power requirement:18 kW weight of the machine ca.:6,5 t dimensions of the machine ca.:2,6 x 1,7 x 2,6 m precision machine in 4-column design, Sanyo V76 precision cam feeder, feed direction right to left, with Siemens CNC control OP15, noise reduction cabin, Herion press security valve, central lubrication, emergency cut-off

Condition: excellent (used), Year of construction: 1974, functionality: fully functional, feed length Y-axis: 60 mm, ram adjustment: 80 mm, pressing force: 50 t, stroke length: 60 mm, overall weight: 4,500 kg, Haulick RV 50 Year of production 1974 Nominal force at medium speed and medium stroke of approx. 30 dg before UT in continuous stroke - 50 Mp speed range 1/min - 60-360 Ram stroke - 60 mm Stroke adjustment - 80 mm Bore fi 40 mm Weight 4500 kg The press is from closed stamping plant located in Poland,. Still connected to the power supply. Possibility to check the machine in operation. Nwodpfxjwiu Dpe Agzjn The press are in very good condition

Year of construction: 1981, condition: used, pressure 63 t stroke 6-60 mm no. of strokes 90-550 Hub/min 300 mm table surface area 780x600 mm Nwedpfolp U R Iex Agzsn ram surface 807x460 mm tool hole in ram Ø 40 mm ram - range of adjustment 80 mm total power requirement 15 kW weight of the machine ca. 8 t dimensions of the machine ca. BxTxH 2900x2000x3000 m