Circular shear buy used

Identified location: Ashburn (US) (Edit)
Enter your address
or
Move
4

Circular Shear PARX KSM/3

Bühl, GermanyGermany dealership location
6593 km
1974
used
6 mm throat 1420 mm round blank diameter max. 2600 mm E7chbgf7g round blank diameter min. 240 mm sheet thickness - max. 6 mm cutting speed 12 m/min total power requirement 3 kW weight of the machine ca. 1,8 t more
4

Circular Shear Aryma KS3-1000/Sp CE3

Solingen, GermanyGermany dealership location
6408 km
2000
used
cutting capacity 4 mm round blank diameter max. 1000 mm round blank diameter min. 150 mm total power requirement 4 kW Bcavnwqq9a weight of the machine ca. 0,9 t dimensions of the machine ca. 1,6 x 0,9 x 1,3 m more
5

Circular Shear PARX KSM/2

Krefeld, GermanyGermany dealership location
6378 km
1975
used
6 mm throat 500 / 1150 mm round blank diameter max. 2000 mm H92taa9da round blank diameter min. 240 mm sheet thickness - max. 6 mm cutting speed 12 m/min total power requirement 3 kW weight of the machine ca. 1,8 t dimensions of the machine ca. 4,00 x 0,65 x 1,50 m more
8

Circular Shears. Bahmueller 2200

Schwaig, GermanyGermany
6757 km
1969
refurbished (used)
1969 - (2017 Completely overhauled) Oorn7tnb • Bahmüller circular shear with safety and anti-noise cabinet from Schorch • Working width 2,200 mm. • Processes 1.5 to 10 mm thick corrugated board • Automatic insertion and ejection • Length 5,5m incl. Rails. Width 3,1m. • Speed 55 to 165 m / min. • 5 cutting knives and 8 knives. • 8 kWh consumption • documents • In great condition • In production - can be tested. more
2

Circular shear Joerg 1500 x 3 mm

Lemmer, NetherlandsNetherlands dealership location
6250 km
used
Circular shear Joerg Capacity: Ø 1.500 x 3 mm Ssx0z8 Featured with: - Foodpedal - User manual Country of origin: Holland Motor power: 1,25 Kw Machine LxWxH: 190 x 50 x 150 cm more
2

Circular shear FASTI 502/07/2

Wiesbaden, GermanyGermany dealership location
6534 km
1975
used
Cepws2v0 for plate thickness: 2 mm for circles-Ø: 100 - 750 mm engine: 380 V, 0,75 kW weight: 240 kg space needed: 380 x 1300 x 1100 mm more
1
Manual circular shear Fabr. FASTI type 501 KS 15/1,5 Year of construction 1968 Technical data: for base diameter 120-1000 mm for strip widths 10-260 mm maximum sheet thickness 1,5 mm Dimensions L x W x H approx. 200 x 400 x 1200 mm Weight approx. 190 kg with -Base Nh22e3pux used, in very good condition more
5
Technical data: -for floors of approx. 120-700 mm -for strip of 10-260 mm -maximum cutting capacity at 45 KP / mm² 2 mm -Space requirement approx. B 400 x H T 1200 x 1550 mm -Weight approx. 200 kg Fr7eqmsva more
4

Circular shear PARX KSM/sch2/68

Wiesbaden, GermanyGermany dealership location
6534 km
1984
used
for plate thickness: 4 mm for circles-Ø: aus 8eck-Blech 1250 mm Ty0k32sa engine: 380 V, ca. 5 kW space needed: 500 x 3600 x 2200 mm more
2

Manual Circular Shear FASTI KS 501 07/2 (2 mm Blech)

Staufenberg, GermanyGermany dealership location
6563 km
1989
used
Manual circular shear Fabr. FASTI type KS 501 07/2 Fabr.# 8951008 built in 1989 in absolutely mint condition! Technical data: for floors of 100 – 750 mm for strip of 10-260 mm maximum sheet thickness 2.0 mm Weight approx. 200 kg Ee2rn2ut0 with -Replacement wheels -mobile base very little used, in very good condition more


circular s...
daily

New machines via email!

Stay updated!
1
Elect./Voltage: Bbur9unsw9 AMF HS3013 Hydraulic Power Squaring Shear -- Cutting Capacity – Mild Steel 10' x 1/2" -- Overall Cutting Width 120" -- Number of Holddowns 18 -- Cutting Angle 1 ° - 3° -- Speed 6 – 9 SPM -- Motor: 24 HP Equipped With: -- 36" Front-Operated Powered Back Gauge -- Front Support Arms -- Electric Foot Switch Operation more
5
Spare blade for guillotine shears, replacement cutting, cutting knives, slitter knives Dimensions 20 x 58 mm Lengths of 2 x 750 mm / 2 x 875 / 1 x 100 mm Hole spacing 125 mm Bore was sunk 15 mm Price complete Weight 30 kg Qlncv0het more
10

Guillotine Shear Trumpf Tru Shear 5163

Amsterdam, NetherlandsNetherlands dealership location
6220 km
2007
ready for operation (used)
*Later pickup - 15.August 2018"Ser. No. 108544-W, work width 3.050 mm, cut thickness max. 16 mm, electr. Back gauge, 4 support brackets with a T-groove, length 1,500 mm, left bracket with side stopper, 2 protection fences with light barrier, hours operating hours approx.18,950 Hi0upmawg more
5
saw blade diameter:400 mm cutting diameter:130 mm stroke:150 mm capacity 90 degrees: square:115 mm feeds hydraulic /stepless:0 - 1,5 m/min engine output:2,0 / 2,6 kW saw blade turning speeds:10 + 20 U/min total power requirement:12 A dimensions of the machine ca.:1,5 x 1,1 x 1,85 m weight of the machine ca.:1,1 t Bu2mipxl more
2
Metal cutting circular saws Eisele from a training workshop in very good condition According to photos Saw blade diameter 300 mm Speed 40/80 U/min Coolant system Gdkgd8p more
9
Saw blade diameter: 250-315 mm Min. length: 35 mm Maximum cutting length: 2000 mm Cutting capacity round: 90 mm Bbpz9thfe8 Section square: 10 x 10 mm Weight: approx. 2500 kg more
1

SHEAR (HYDRAULIC) PULLMAX GST SMT

North Carolina, United StatesUnited States dealership location
518 km
used
Elect./Voltage: Juwqhu 16' X 3/4" GST SMT PULLMAX HYDRAULIC POWER SQUARING SHEAR -- MOTORIZED BACK GAUGES [...] YES -- HYDRAULIC HOLD DOWNS [...] YES -- BALL TRANSFER TABLE [...] YES -- (2) FRONT ARM EXTENSIONS . YES -- FLOOR MOUNTED [...] YES16' X 3/4" GST SMT PULLMAX HYDRAULIC POWER SQUARING SHEAR more
5
Aluminium circular saw, compound miter saw, glass Strip saw, Alukappsäge, metal cutting saw, crosscut and miter saw Processing of shallow angle and solid material, pipes and special profiles-max saw blade Ø 360 mm L328x -aufgebautes saw blade ø mm drive 1,8/2,6 kw Speed 1460/2900 R/min Dimensions 600/960/H1600 mm Weight 204 kg more
1

Guillotines / Shearing PEARSON 3000mm x 13mm Guillotine / Shearing Machine

Leicestershire, United KingdomUnited Kingdom dealership location
5832 km
ready for operation (used)
Serial No. 681201/2 Capacity 3048 mm x 13 mm Back gauge power Rapid blade adjustment yes Work supports 2 @ 60" long Squaring arms 1 @ 100" long Input 400/3/50 25 hp approx Clamps 14 x hydraulic Cmtbzhoa Read-out to back gauge dual Actuated via full length foot treadle Fitted with fingerguard Length 12' 10" Width 6' 10" Height 7' Nett weight actual. 10,750 Kgs / 10.58 Tons more
4

Cold Circular Saw KALTENBACH HDM 800

More Kaltenbach Hdm 800
Mönchengladbach, GermanyGermany dealership location
6371 km
1970
used
saw blade diameter:800 mm cutting diameter:250 mm stroke: mm capacity 90 degrees: flat:500 x 170 mm capacity 90 degrees: square:220 mm feed speeds:1 - 1000 mm/min total power requirement:10 kW weight of the machine ca.:3,1 t Ughchsddo dimensions of the machine ca.:2,1 x 1,2 x 2 m more
1
Eisele KMS 90 Fully functional from an Ausbildungseerkstatt Saw blade diameter 275 mm Cutting capacity at 90 degrees: approx. 90 mm Cutting capacity at 45 degrees: approx. 90 mm Cutting capacity at 90 degrees: square Max 120 x 75 mm Cutting capacity at 45 degrees: square 80 x 75 mm C0wznhq Speed range 40 / 80 U/min Number of 2 speed drive motor 1.0 / 1.4 kW Motor speed 1.420/2,850 Rev/min Voltage 380 V / 50 Hz Machine weight approx. 150 kg more
6

Circular saw Eisele VMS III Hydr.

Anemonenweg 8, 33335 Gütersloh, DEGermany
6463 km
1983
ready for operation (used)
Maximum blade diameter: 350 mm Yrquxs Hydraulic material clamping and hydraulic feed Coolant pump more
1
Elect./Voltage: 220/440 V, 60 Cy, 3 Ph. Gloddszki CINCINNATI 4FL-20 Hydraulic Shear -- Nominal Plate Cut Thickness 1/2" -- Maximum Plate Cut Thickness 5/8" -- Maximum Cut Length 20" -- Distance between housings 20' 3" -- Throat 18" -- Distance Floor to Bed 32" -- Blade Size 1.125" x 5" -- Strokes Per Minute (Full Length) 11 SPM -- No. of Hydraulic Holddowns 23 -- Hold down Force 55 tons -- Distance Under Holddowns 1.25" -- Machine Weight (Approximate) 89,600 LBS -- Machine Dime... more
5
Spare blade for guillotine shears, replacement cutting, cutting knives, slitter knives -2 x knives available Angle geschiffen 90 ° Dimensions 20 x 80 mm Lengths of 2 x 2397 L7c0n Hole spacing of 73/125/200/200/200/200/200/200/200/200 / 200 / 200 / 125 / 73 mm Threaded hole Price complete Weight 56 kg more
2

Hand-Lever Shear MUBEA 2/8/300

Bünde, GermanyGermany dealership location
6460 km
used
sheet width - max. 300 mm Lifqj plate thickness 8 mm flat steel 80 x 10 mm blade length 300 mm machine length 860 mm machine height 565 mm weight of the machine ca. 172 kg Function: ready for operation Long measuring shear on a base. Machine dealer with own stock of 2500 m² and certification of the database "Machineseeker". more
5

Hydraulic plate shears Lotze

Netphen-Deuz, GermanyGermany
6492 km
excellent (used)
Hydraulic plate shears Manufacturer: Helmut Lotze Type: TW 2500 / 12 mm Machine no.: 201 2504 Condition: very good Facilities: new knife Adjustment of the cutting gap Foot operated Emergency - off Technical data: Bcsfejyo7c Maximum sheet length 2500 mm Maximum sheet thickness 12 mm Table size: Width x length 540 x 2550 table height: 830 mm Number of holders: 15 PCs. Electric rear gauge 1000 mm more
Eisele KMS 90 Fully functional from an Ausbildungseerkstatt Saw blade diameter 275 mm Cutting capacity at 90 degrees: approx. 90 mm Cutting capacity at 45 degrees: approx. 90 mm Cutting capacity at 90 degrees: square Max 120 x 75 mm Cutting capacity at 45 degrees: square 80 x 75 mm Speed range 40 / 80 U/min Number of 2 speed drive motor 1.0 / 1.4 kW Motor speed 1.420/2,850 Rev/min Voltage 380 V / 50 Hz Machine weight approx. 150 kg C0nihtp more
6
Maximum cutting length: 1030 mm Fn2lfwx Maximum sheet thickness: 2,5 mm steel Manual back gauge up to 540 mm Page fence and table extensions more
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. Ctssila8 KNUTH KMT 1554 NC Swing Beam Plate Shear -- Maximum plate thickness .16” -- Cut length maximum 61” -- Cut angle 1 degree 30” -- Number of strokes / minute 35 -- Work table height inches 33” -- Rear stop 18” -- Main motor rating 10.1 HP -- Dimensions 66” l x h 4’ x w 53” -- Weight 2600 lbs more
5
Spare blade for guillotine shears, replacement cutting, cutting knives, slitter knives Qlncmjbqs Dimensions 20 x 58 mm Lengths of 2 x 750 mm / 2 x 875 mm Hole spacing 125 mm Bore was sunk 15 mm Price complete Weight 28 kg more
4
1 used plate shear manufacturer: Steiner Type: HTS 30 / 16c. BJ. 1992 Working length: 3050 mm Cutting line: 16 mm Lxwxh = 4,400 x 2600 x 3,300 mm Weight approx. 26 to. Accessories: spare blade machines offered by us are from property of the partner companies of CBW Böhmer machine tools and AS machinery trade. Any dissemination and publishing is allowed only after consent of the above-mentioned owner. Bcckypom79 more
4
Working height: 11.5 m Height: 9.5 m maximum load capacity: 318 kg Bcc0ajs Platform size min.: 2260 x 1150 mm Expands Platform size: 3180 x 1150 mm Transport dimensions (L x W x H): 2410 x 1170 x 2390 mm Weight: 2.790 kg more
7
Table shears from the top manufacturer RAS commercial length approx. 3100 mm cutting thickness 2 mm electric depth stop with quantity programming tilting table for sheet ejection front / rear can be decided via foot-switch where the clippings back slips Large angle stop front with MAS Bcsu9hyqwh Via Handwheel in 0.5 it weight 1950 kg steps cut gap adjustment more
5
Maximum cutting length: 1030 mm Maximum sheet thickness: 2,5 mm steel Bbdwlsmwmj Manual back gauge up to 540 mm Page fence and table extensions more
1
Elect./Voltage: Bburkpkdiy LVD JS50/10 Hydraulic ShearSpecifications: -- Maximum capacity, mild steel 1/2". -- Maximum cutting width 10’. -- Rake angle adjustment 1/2 – 3 degree. -- Blade clearance adjustment .002” - .05”. -- Strokes per minute 8 – 35. -- Back gauge range (motorized) 40”. -- Standard squaring arm range 40”. -- Number of hold-downs 17. -- Motor 30 hp. -- Oil tank capacity 65 gallons. -- Working height 39”. -- Floor sp... more
5
Spare blade for guillotine shears, replacement cutting, cutting knives, slitter knives -2 x knives available Angle geschiffen 5° Dimensions 19 x 80 mm Lengths of 2 x 2400 mm Wt8u09ywm Hole spacing of 75/125/200/200/200/200/200/200/200/200 / 200 / 200 / 125 / 75 mm Threaded hole M16 Price complete Weight 56 kg more
3

Cold Circular Saw TRENNJAEGER UNI 16-10

Monheim, GermanyGermany dealership location
6405 km
used
saw blade diameter 520 mm cutting diameter 135 mm profile width 400 mm turning speeds 3000 U/min. capacity 90 degrees: round 110 x 2,0 mm capacity 90 degrees: square 30 x 30 mm capacity 90 degrees: I 110 x 110 x 9 mm total power requirement 7,5 kW Dc2gp2kd8 weight 0,5 kg range L-W-H 0,9 x 1,1 x 1,2 mm hydr. Height Adjustment more
1
Semi-automatic circular saw SMA-REF-6276 Type: circular sawing machines Manufacturer: Kaltenbach Model: KKS 400 E Year: 2000 Working range: Sawbladediam.: 400 mm round 90°: 130 mm square 90 ° 120 mm Nfggh flat 90°: 300 x 40 mm +/- 45° Features: for steel and stainless steel Condition: ready for action under power Location: Southern Germany Dimensions: 1.100 x 800 x 1.800 mm 850 kg Availability: on demand more
5
well-preserved saws with 4-axis control: Electric height and swivel adjustment for the main saw blade with pre scoring unit Control Panel at eye level Bcsr7gfvx8 RIP fence with Electr. Adjustment Cutting width: 1300 mm Carriage with 3200mm length The length stop motor controlled Motor power: 5, 5kW / 7.5 HP 3-speed more
6
Maximum cutting length: 2040 mm Maximum sheet thickness: 2 mm steel Bbbwdqmyyw -Driven Backgauge sheet reversible Page fence and table extensions Knives sharpened and adjusted Weight: approx. 1200 kg more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Glogc8rss CINCINNATI 1810G Hydraulic Power Squaring ShearSpecifications: -- Capacity (mild steel) 1/4". -- Maximum cutting length 10’2". -- Number of hydraulic holddowns 11. -- Holddown force 8 ton. -- CNC front & rear gauging. -- Front gauge range 55". -- Back gauge range 36". -- Strokes per minute 60. -- Automatic lubrication of shear and gauges. -- 7-1/2 hp continuous duty motor. -- Multi-axis gauge control. -- 10ft left hand power sq... more
5
Construction circular saw, circular saw -Maximum cutting height 150 mm Table size 1030 x 750 mm -Abmasse 1200/800/H1100 mm Weight 110 kg Hmweyqk more
6
saw blade diameter 350 mm cutting diameter 120 mm speeds 1700/3400 U/min dimensions of saw-blade 350 x 32 mm Max. opening of wise 180 mm capacity 90 degrees: square 105 mm capacity 90 degrees: flat 180 x 70 mm capacity 45 degrees: square 100 mm capacity 45 degrees: flat 135 x 60 mm weight of the machine ca. 160 kg dimensions of the machine ca. 8 x 0,7 x 1,23 m Condition: good CE signed Electric 380 Volt Approach rolling table 4,5 mm Roller conveyor with measuring stop 3 m saw blade Y... more
11
Saw blade diameter 400mm Cutting capacity diameter -130mm Angle cut +/- 90° Cutting length 10-1000mm ( max 2000mm) Izx2dpr Bar support 1700+1250mm MARCELS MASCHINEN CH more
5

Plate Shear - Hydraulic EHT TSS 6-60

Köln, GermanyGermany dealership location
6416 km
1995
used
sheet width:6000 mm plate thickness:6 mm distance between columns: mm throat: mm back stop - adjustable:1000 mm total power requirement:17 kW weight of the machine ca.:24,2 t dimensions of the machine ca.:6,600 x 2,550 x 2,500 m Ndc07 EHT TSS 6-60 Hydraulic guillotine shear for sheet metal cutting 0.5 mm to 6 mm sheet thickness. The guillotine is equipped with a backgauge, this is adjustable from 10 mm to 1000 mm. The guillotine shear is ready to show in operation and in good condition. Nenok... more
4
Maximum cutting length: 1060 mm Cunmspei Maximum sheet thickness: 2 mm steel Manual back gauge Weight: approx. 550 kg more
1
Elect./Voltage: 480 V, 60 Cy, 3 Ph. Bburzctw8j CINCINNATI 4316 Mechanical Shear Specifications: -- Capacity 16' x 3/8". -- Backgauge range 48". -- Holddowns 17. -- Approx. machine weight 59,000 lbs. -- Approx. machine dimensions 8'11" x 11' x 18'.Equipped with: -- 48" front operated power backgauge. -- Left hand squaring arm. -- Palm buttons. -- 3 extra blade sets. more
4
Spare blade for guillotine shears, replacement cutting, cutting knives, slitter knives Dimensions 79 x 19 mm Lengths of 2 x 1055 mm Pitch 50/238 mm Xxpwqcufw Bore was sunk 17 mm Price complete Weight 24 kg more
6

circular saw Altendorf F45

More Altendorf F 45
Egenhofen / Herrnzell, GermanyGermany
6816 km
1998
ready for operation (used)
Type: F45 used machine Height and tilt adjustment handweel scoring unit arm length: 2800mm cutting width: 1350mm 4 speed Bcsmgqe7az motor power: 5,5kW Year of construction: 1998 Location: Warehouse / 82281 Herrnzell more
4

Plate shear EHT TSS 4-31

Mannheim, GermanyGermany dealership location
6584 km
1995
good (used)
Plate shear EHT type TSS 4-31 3100x4mm year 1995 with outlet conveyor and pile Turner sale is ensured only to traders within the meaning of § 14 BGB 88cfz37dy more


circular s...
daily

New machines via email!

Stay updated!

to

to

Edit search
CIRCULAR SHEAR
SELL IMMEDIATELY
with Europe's market leader for as little as € 0,49 per ad.
Find out more


Phone: +1 312 94 04 581
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machineseeker chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close