Used Scrap Shear for sale (1,844)

Condition: excellent (used), Year of construction: 2017, operating hours: 12,450 h, machine/vehicle number: 1231, Lefort shear baler 330 Kjdpfx Absv I Utvj Towu Cuts steel and bales material very good condition ,remote control included

Condition: defective spare-parts repository (used), functionality: not functional, cutting force: 2,000 t, power: 169.16 kW (229.99 HP), empty load weight: 65,000 kg, total width: 2,550 mm, total length: 8,625 mm, total height: 3,260 mm, We are selling our Bonfiglioli Squallo 2000 scrap shear. It has suffered fire damage. The entire drive and hydraulic section has burned out. However, the shear blades, shear cylinder, and flippers are NOT damaged! The supports are still functioning. The entire drive and hydraulic system, as well as the control unit, need to be replaced. However, you can implement your own custom rebuild if preferred. Kwodoyl Unljpfx Ab Tou The shear is equipped with a quick-opening function. When the blade is raised, the large valves open and the blade rises very quickly. This function is still operational. Sale is made excluding any warranties, as this is a defective product.

Condition: used, Year of construction: 2010, operating hours: 27,000 h, functionality: fully functional, A used mobile scrap shear is being offered for sale. The machine can be inspected at any time. Kwedpfxsykzv Ho Ab Tou

Condition: like new (used), Year of construction: 2024, operating hours: 2,000 h, functionality: fully functional, A nearly new scrap shear is for sale, which can be inspected in operation at any time. Kwedpfx Aoykzuisb Tou

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, cutting force: 700 t, power: 300 kW (407.89 HP), empty load weight: 115,000 kg, total width: 3,000 mm, total length: 17,000 mm, total height: 4,000 mm, overall weight: 91,000 kg, cutting length (max.): 7,100 mm, year of last overhaul: 2024, pressure: 360 bar, Taurus K773.L1E Cutting force 700 tons Cutting width 950 mm ( blade 1000 mm ) Cutting height 650 mm Box 7100 mm rammer 900 kN Central lubrication system Included 300 kW drive power Revision 2024 (year of construction 2006) Revision includes the following work: - Replacing the HARDOX carriage guides - Replacing the carbon guides on the blade carriage - Installation of new knife seats top/bottom - Installation of new blades and screws top/bottom - Welding on the worn parts in the scissor mouth - Dismantling of both covers, fitting new hinges, fitting new shafts, reassembly Kjdpjuptmyjfx Ab Tjwu - Overhaul of all 4 HPR 160D pumps at LINDE Poland - Sealing the valves on the left/right valve bank - Installation of new piston rod feed (180 x 8.29 m) - Installation of new feed guide bushes incl. sealing package - Overlay welding of feed block and hold-down device, followed by milling to size - Inspection of side cylinders, in some cases installation of new seal packs, if required - Replacing piston rods and honing pipes - General repair work on hydraulic pipes, clamps, in some cases - Replacement of damaged hoses - General repair work on structure, covers and platform construction - Repainting of the system - Steel frame for mounting the machine Ready for immediate use. Available from December 2024 with repainting

Condition: new, Year of construction: 2026, functionality: fully functional, New shear blades, for example for Lindemann LU 1010 Dimensions: 200x80x524, split version (see drawing) Ksdpfx Abox R Ud Ee Towu 8 pieces available / 2 sets Price per piece.

Condition: excellent (used), Year of construction: 2009, operating hours: 16,800 h, functionality: fully functional, cutting force: 600 t, power: 242.71 kW (329.99 HP), Lefort Mobile 600 Tons Shear force: 600 t Hold-down force: 120 t Pusher force: 180 t Lid closing force: 240 t Box height: 600 mm Box width: 800 mm Box depth: 6000 mm Kwedpfx Aouptrpeb Teu Available immediately

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, cutting force: 850 t, empty load weight: 140,000 kg, year of last overhaul: 2022, We offer this ready-to-use Lefort CC-850TON scrap shear/baler, year of manufacture 2008 (completely overhauled in 2016 by Corema (Lefort)). Machine type: CC-850TON Serial number: 359 The shear was fully overhauled in 2016, and the shear head was overhauled again by Corema (Lefort) in 2022. All invoices for the refurbishment are available. All documents (manual, plans, spare parts catalogue) are also available. Kwjdpfoyft D Ssx Ab Tsu If you have any questions or require further information, please feel free to send us a message or call us.

Condition: refurbished (used), Year of construction: 2019, operating hours: 20,000 h, functionality: fully functional, cutting force: 630 t, power: 90 kW (122.37 HP), empty load weight: 36,500 kg, total width: 2,400 mm, total length: 9,500 mm, overall weight: 40,000 kg, cutting length (max.): 1,600 mm, year of last overhaul: 2024, type of input current: three-phase, operating pressure: 220 bar, Scrap Shear MS-6300e (scrap shear with electric motor), supplied without operating fluids. Model: MS-6300e Cutting force: 630 t Cutting length: 1600 mm Discharge height: 600 mm Power: 110 kW Capacity: 12–17 t/h Machine weight: 40 t Hopper size: 3850 mm x 2600 mm x 1500 mm Information: A scrap shear is used for efficient scrap cutting: - Simple automatic operation - Energy-saving - Cost-effective - No foundation required Function: Scrap is fed into the intake area using an excavator. Due to the horizontal loading area and the self-weight of the scrap, the material falls into the loading chamber and the cutting area. The scrap is compressed against the front wall and is cut by the horizontally moving tool carriage, pressing the material over the blades mounted on the front wall. While the tool carriage moves horizontally, the processed material is pushed out through the blades at the front end of the chamber. When returning to the rear position, the loaded scrap moves by gravity into the shear. Kwjdpfx Ajx Tp H Heb Tsu The scrap shears are available in various configurations according to customer requirements, and the output size can be customized (with new orders). Inspection and test operation are possible.

Condition: excellent (used), Year of construction: 2023, operating hours: 3,500 h, functionality: fully functional, cutting force: 630 t, power: 90 kW (122.37 HP), empty load weight: 36,500 kg, total width: 2,400 mm, total length: 9,500 mm, overall weight: 40,000 kg, cutting length (max.): 1,600 mm, year of last overhaul: 2024, type of input current: three-phase, operating pressure: 220 bar, Scrap shear MS-6300e (scrap shear with electric motor) without operating materials. A 250kW diesel generator can be offered separately. Model: MS-6300e Cutting force: 630t Cutting length: 1600mm Discharge height: 500mm Power: 110 KW Capacity: 12-17 t/h Machine weight: 40 tons (+ diesel generator 4 tons) Hopper size: 3850mm x 2600mm x 1500mm Information: A scrap shear is used for economical scrap cutting: - simple automatic operation - Energy-saving - Cost-saving Kedpfsuu Upgex Ab Tjwu - No foundation required Function: Scrap is fed into the loading area with the aid of an excavator. Due to the horizontal filling area and the scrap's own weight, it falls down into the loading chamber and into the cutting area. The scrap is compacted at the front wall and cut by the horizontally moving tool pick-up side via the blades on the front wall. While the tool carrier carriage moves horizontally, the processed material is pushed out via the blades on the front wall of the container. When returning to the rear position, the loaded scrap moves into the interior of the shears under its own weight. The scrap shears are available in different versions depending on customer requirements and the output size can be selected (for new orders). Inspection and trial operation are possible.

Condition: new, Year of construction: 2024, functionality: fully functional, cutting force: 630 t, power: 110 kW (149.56 HP), total width: 2,400 mm, total length: 9,400 mm, total height: 3,800 mm, overall weight: 50,000 kg, cutting length (max.): 1,600 mm, type of input current: three-phase, Scrap Shear MS-6300mex (mobile version, with electrical motor) Diesel Generator 250KW is optional Modell: MS-63000e Cutting Power: 630t Kjdpfor Ihziox Ab Tjwu Blade length: 1600mm Output size: 500mm Power: 110 KW Capacity: 8-15 t/h Machine Weight: 39 t (+ Dieselgenerator 4t) Hooper size: 3900mm x 2400mm Information: Container Shear is used for economical scrap processing/ easy automatic operation/ energy saving/ cost saving/ no foundation needed. It can cut any kinds of scrap material. Different models for your choice. Machine is not suggested to cut high-carbon steel; axles; wire rope; pig iron; spring steel plate; rail; alloy steel; hub and so on... (these are not good for blades) Function: Scrap is filled into the hopper by means of a grab loader. Due to the horizontal movement of the holder and the scrap’s dead weight, it falls to the bottom of the loading chamber and into the cutting space. After having been compressed on the front wall, the scrap is cut by the horizontally-moving tool-holding side via the blades on the front wall. While the tool-holding slide is moving horizontally, the processed material is pushed out via the blades on the container’s front wall. While returning to the rear position, the loaded scrap moves under its own weight into the shears’ interior. The scrap shear machines are available with different design, depending on the customer requirements. The output size can be choose (only for new order).

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, BONFIGLIOLI SQUALO 950 WITH NEW ENGINE! Kwodpfx Ajyg Hhteb Tou

Condition: ready for operation (used), Year of construction: 2009, operating hours: 8,500 h, functionality: fully functional, fuel: diesel, IDROMEC 650 diesel engine plus generator, ready to use Kwsdpfx Abjyg Hcdo Tsu

Condition: used, Year of construction: 1995, functionality: limited functionality, cutting force: 800 t, empty load weight: 190,000 kg, type of input current: three-phase, Arnold HS850 Scrap & Metal Presse Die Maschine befindet sich derzeit in transportbereitem Zustand. master cylinder cylinder force: 850 t press: 0.08m/s hold-down cylinder cylinder force: 100t / per cylinder feed cylinder: cylinder force:100t cover cylinder: cylinder force:100t main dimensions total length:16175mm total width:5200 total height: 6420 mm Kwjdpfxsh T Dcts Ab Tou Dimensions: Passage width at the scissor stand: 800mm passage height at the scissor stand: 800mm total height: 6000mm weights: scissor stand with cutter bar: 60 ton feed device approx: 85 ton total weight: about 170 tons required amount of oil: 5200 liters connection value of the machine: 220kw If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: new, functionality: fully functional, overall weight: 2,400 kg, Year of construction: 2025, New scrap shear for excavators from 20 t, 360-degree rotatable, accessories, Hardox, CE-certified machine. Other sizes in stock. Kwedpfxoydnuij Ab Tsu

Condition: like new (used), Year of construction: 2023, operating hours: 2,400 h, functionality: fully functional, machine/vehicle number: R40410, cutting force: 900 t, power: 371.43 kW (505.00 HP), empty load weight: 75,000 kg, COPEX REFLEX 900 ton mobile diesel shear baler (year 2023). Maintenance carried out by the manufacturer. Output: 10 to 22 t/h depending on the type of scrap to be sheared. Immediately available. Kodpfxjxg Ekfj Ab Tewu

Year of construction: 2024, condition: new, IMPORTANT: MACHINE WILL BE BRAND NEW All electric-electronic components used are Schneider and Siemens Brands. Machine will be under AYMAS Makina San. Ve Tic. A. S. Guarantee for one (1) year or two thousand five hundred (2.500) operation hours, whichever comes first. The cylinder rods, especially “hard chrome plated” for resistance against any damage, are induction hardened to maintain maximum strength. The “Off-The-Shelf” equipment used in the electric and hydraulic systems are from reputable worldwide brands and comply with the CE European standards. The body of the machine is constructed from “DIN St52” material. After welding they are stress-relieved and sandblasted before painting. Kwodpfsgv Ix Isx Ab Tsu SEE THE TECHNICAL DESCRIPTION BELOW Electric Motors: 11 kW Machine Weight: appx 2.700 kg Cutting Speed: 5 cuts/min Blade Length: 620 mm Max. Working Pressure: 250 bars Cutting Force: 150 tons Machine Dimensions (Width x Length x Height): 750 mm x 2.500 mm x 1.300 mm

Condition: new, Year of construction: 2025, - Cutting Force : 900 Tons - Capacity : up tp 25 tons per hour - Side Compression Force : 2 x 120 Tons - Clemp Compression Force : 160 Tons - Electric Motor : 220 kW - Machine Weight : 78.000 kg - PLC Controlled - Remote Control Avaliable - Output Length Adjustable Ksdpfegv Aa Iex Ab Towu

Condition: new, Year of construction: 2025, - Cutting Force : 700 Tons Kodsgv Aacspfx Ab Tewu - Capacity : up tp 20 tons per hour - Side Compression Force : 2 x 85 Tons - Clemp Compression Force : 100 Tons - Electric Motor : 160 kW - Machine Weight : 55.000 kg - PLC Controlled - Remote Control Avaliable - Output Length Adjustable

Condition: new, Year of construction: 2025, Also, different models are available! IMPORTANT: THE MACHINE WILL BE BRAND NEW An Inclined Shear is a heavy-duty machine used in metal recycling facilities to cut various types of scrap materials efficiently. • Mixed and heavy-duty scrap can be processed (HMS 1 & 2, cars, pipes, etc. ) • No scrap length limit • No operator needed • Cut length adjustment options • Electric and Diesel options • Stationary and semi-mobile options • Hydraulic blade tightening system • The guillotine is made of casting • A remote diagnostic system is implemented • Automatic lubrication • Good output density • Heavy-duty structure • Chrome-plated & tampered shafts and sensitively honed cylinders • Special anti-wear plates Kjdegv Abpjpfx Ab Tswu • Reliable filtration system for the hydraulic oil • Reliable cooling system depending on the working climate • Top-brand hydraulic and electronic components The machine is CE-certified. The marking certifies that a product has met European Directives regarding consumer safety, health, or environmental requirements. Machine will be under AYMAS Makina San. Ve Tic. A. Ş. Guarantee against manufacturing defects for one (1) year or two thousand five hundred (2.500) working hours. SEE THE TECHNICAL DESCRIPTION BELOW Model: IS 1350 Cutting Force: 1.350 ton Hold Down Force: 250 ton Side Compression Force: 2x200 ton Cutting Width: 1.040 mm Number of Cuts: 2-3 cuts/min. Capacity up to 50 ton/h Weight: 128 ton Electrical Motor Power: 3x132 kW Chamber Dimensions: (W x L) 2,45 m x 8,5 m. General Dimensions: (W x L) 4,6 m x 11 m.

Condition: new, Year of construction: 2025, - Cutting Force : 1600 Tons Kjdjgv Acuspfx Ab Tswu - Capacity : up tp 70 tons per hour - Side Compression Force : 2 x 220 Tons - Clemp Compression Force : 250 Tons - Electric Motor : 480 kW - Machine Weight : 150.000 kg - PLC Controlled - Remote Control Avaliable - Output Length Adjustable

Condition: new, Year of construction: 2025, IMPORTANT: MACHINE WILL BE BRAND NEW * The cutting guillotine is made of cast steel and is more resistant to fracture, buckling, and abrasion. * Cast steel cutting ram is subjected to a stress-relieving process. Kwededd Tp Rjpfx Ab Tou * The bolts of the blades on the cutting ram are monitored by the automation system and they are constantly kept tight by the hydraulic tightening system. Fracture and wear of the blades are minimized with this system, and 5 tons of force is applied to each bolt of the blades. * A hydraulic clamping system is used on both the moving and fixed parts of the blades. * Friction surfaces are coated with HARDOX 450 & 500 to prevent wear. * The machine has a fully automatic PLC control and a professional remote controller. * All electric-electronic components used are Schneider and Siemens Brands. * Machine will be under AYMAS Makina San. Ve Tic. A. S. Guarantee for one (1) year or two thousand five hundred (2.500) operation hours, whichever comes first. SEE THE TECHNICAL DESCRIPTION BELOW: Cutting Force: 700 Tons Side Compression Force: 2x120=240 Tons (each wing) Clamp Compression Force: 120 Tons Pusher Ram Force: 120 Tons Electric Motor: 180 kW Machine Weight: 70.000 kg Cutting Width: 800 mm Box & Bale Size: 800 mm x 600 mm Box Length: 6.000 mm Box Width Opening: 350 mm Capacity: < 10 - 15 ton/h (Cutting Capacity), 15 - 20 ton/h (Baling Capacity)

Condition: excellent (used), Year of construction: 2000, Diemer residual wood shear ASC 65 - 25 Kwsdpswu Nwnsfx Ab Tju Infeed dimensions 650mm x 250mm with infeed vibrating trough

Year of construction: 2024, condition: new, - Cutting Force : 1100 Tons - Capacity : up tp 50 tons per hour - Side Compression Force : 2 x 120 Tons - Clemp Compression Force : 160 Tons - Electric Motor : 264 kW - Machine Weight : 85.000 kg - PLC Controlled Kwedpfjdfcpaex Ab Tju - Remote Control Avaliable - Output Length Adjustable

Condition: like new (used), Year of construction: 2023, operating hours: 3,000 h, functionality: fully functional, For sale is a mobile Lefort scrap shear. The machine is in very good condition and can be inspected at any time. Kwjdpfx Asx Elyasb Teu