Used Scraper for sale (654)

Condition: good (used), Separating tool, punching tool, punch, punch die, punch stamp, wiper, wiper plate -Scrapers: Scraper plate for punching tool, 4 pieces -Size: 10/15/30/40 mm Rodpfxjznafys Ac Tjcd -Dimensions: see photos -Submission/Price: complete -Transport dimensions: 150/110/H60 mm -Weight: 6.1 kg

Condition: used, Punching tool, punch, stripper, hold-down -Scraper: Hold-down device for dies -Hole: Ø30 x 258 mm -Dimensions: 310/100/H125 mm Rsdezm I A Djpfx Ac Tecd -Weight: 4.6 kg

Condition: used, Punching tool, punch, stripper, hold-down Rjdpfx Aszm Iy Nsc Tecd -Scraper: Hold-down device for dies -Hole: Ø27/33 x 257 mm -Dimensions: 360/105/H135 mm -Weight: 5.0 kg

Condition: new, Year of construction: 2026, Edge thickness 0.4 – 3 mm Glue board thickness 12 – 45 mm Difference between edge width and board thickness max. 4 mm Minimum length of glued boards 190 mm Minimum width of glued boards 90 mm Mechanical feed speed 7 m/min Glue temperature 130–250°C Tank capacity 1.2 l Pre-milling head speed 12,000 rpm Linear milling cutter speed 10,500 rpm Cutting blade speed 8800 rpm Polishing disc speed 2800 rpm Installed power 4.91 kW Feed motor 0.75 kW Heating motor 0.25 kW Final cutting motor 0.18 kW Linear milling motor 0.55 kW Rodpfjzp Nycex Ac Tjcd Polisher motors 2 x 0.18 kW Pre-milling motor 0.5 kW Compressed air pressure 250 L/min Extended table width (steady rest) 560 mm Working table height 856 mm Shipping dimensions (L x W x H) 2820 x 720 x 1320 mm Net/gross weight 500 / 632 kg

Year of construction: 1994, condition: used, Profile scraper unit, profile scraper, flat scraper unit, finishing unit, modular unit, format processing unit, double-end tenoner, edge processing machine, scraper for edge processing machine -Manufacturer: OTT, profile scraper from edge banding machine type U206 -Quantity: 1 piece available -Dimensions: 460/430/H560 mm -Weight: 57 kg Rsdpfx Acou Druge Tjcd

Condition: good (used), Profile scraper unit, profile scraper, flat scraper unit, finishing unit, modular unit, format processing unit, double-end tenoner, edge processing machine, scraper for edge processing machine -HOMAG finishing unit allows you to smooth the milled edges for optimal appearance of the edge overhang Rjdpfx Ajb Sc Stsc Tecd -with scanning of 2 sides each -scraping blade from above and below -Quantity: 1 piece available -Dimensions: 500/450/H650 mm -Weight: 60 kg

Condition: good (used), Finishing unit, modular unit, format processing unit, double-end tenoner, edge processing machine, scraper for edge processing machine -Manufacturer: Homag, profile scraper from edge banding machine BRANDT KM 36 / KM35 -Quantity: 1 piece available Rodsgylq Sepfx Ac Tocd -Dimensions: 510/430/H570 mm -Weight: 62 kg

Condition: good (used), Punching tool, punch, scraper, hold-down device -Scraper: hold-down device for punching -Holder: Ø22/25 x 215 mm -Dimensions: 315/65/H85 mm Rsdpfequx Nzex Ac Tjcd -Weight: 1.9 kg

Year of construction: 2026, condition: new, WISSMATEC scraper chain conveyor Overhead conveyor sturdy steel construction chain with scraper bars drive with geared motor Rjdpfxozmm Tze Ac Tscd magnetic separator

Condition: new, Year of construction: 2025, Scraper knife Model: WEIMA, GROSS, UNTHA Type: ZM30, GZ30, RS30 Year of manufacture: 2025 New / ready for immediate use Rcjdpfxsxn I R Ro Ac Tsd 1. 8Z-66 knife 2. 4Z-66 knife We are a manufacturer of replacement knives and spare parts for crushers and shredders.

Condition: new, Year of construction: 2025, Scraper knife Model: WEIMA, GROSS, UNTHA Type: ZM40, ZMK50, GZ40, RS40, RS50 Year of manufacture: 2025 New / ready for immediate use 1. 8Z-86 knife 2. 4Z-86 knife We are a manufacturer of replacement knives and spare parts for crushers and shredders. Rjdpjxn Iyfjfx Ac Tjcd

Condition: used, Chip conveyor, scraper conveyor with coolant tank, BMF Type KF 200 K17 Ident. No.: Order No.: 915979 Year of manufacture: 1992 Width of metal links: 200 mm Rodehwt H Ajpfx Ac Tjcd Distance between carrier bars: approx. 380 mm Length of possible chip discharge: 1100/2100 mm Insertion length: approx. 1350 mm Insertion height: 370 mm Insertion width: 460 mm Hopper width at the top: 400 mm Hopper width at the bottom: 170 mm Conveying height – discharge height: approx. 1250 mm Motor power, belt drive: 0.37 kW Mains connection: 400 volts, 50 Hz - Drive of the scraper chain via geared motor - Coolant tank without coolant pump Space requirement L x W x H: 3800 x 1300 x 1650 mm Weight of chip conveyor: approx. 500 kg Good condition The chip conveyor comes from a GILDEMEISTER CNC lathe. The conveyor is suitable for the chip transport of a milling machine, lathe, or machining center.

Year of construction: 2025, condition: new, functionality: fully functional, UMG-110.56 Scraper conveyor is designed for transporting wood waste after processing. The conveyor works at an angle. The conveyor is anchored to the base during installation. The speed of the chain and scrapers can be set with a speed regulator, the design speed is 15m/min at 50Hz. The length and height can be adjusted according to your needs. Rsdpfx Acowdgfus Tocd

Condition: used, Chip conveyor, scraper conveyor with coolant tank KNOLL type 750 K-3/650 Scraper belt conveyor Serial no.: 346919 Order no.: 200725773 Year of construction 2007 Metal link width approx. 670 mm Distance between flights approx. 550 mm Length of possible chip removal 330 to approx. 3000 mm Insertion length approx. 2700 mm Insertion height approx. 400 mm Insertion width approx. 860 mm Conveyor height - ejection height 1800 mm Belt speed approx. 20 mm/sec. = 1.2 m/min. Motor power belt drive 0.55 kW Motor power coolant pump 3.0 kW Coolant pump flow rate 40 liters/min. Mains connection 400 Volt, 50 Hz - Scraper chain drive via gear motor - Coolant tank with integrated pump Rsdpsphvl Tefx Ac Tecd - Coolant pump, BRINKMANN centrifugal pump, type TS 24/180 - Steel cover plates with drop handles for lifting, chequer plate can be used Space requirement L x W x H 6100 x 1150 x 2320 mm dead weight approx. 2000 kg good condition The conveyor is for transporting chips from a milling machine, lathe or machining center.

Condition: new, Scraper in PE - HD, color red, resistant to hot water, high density, rigid For process engineering in the field of filter presses. to remove the filter cake. Rjdpfx Ajd Eygpoc Tscd Length: 410 mm Handle length: 210 mm Width 125 mm

Condition: new, Product: Scraper in PE - LD Color: white, extra soft and very flexible Other: For process engineering in the field of filter presses. to remove the filter cake Rjdpod Eykzefx Ac Tocd Length: 410 mm Handle length: 210 mm Width: 125 mm

Condition: new, Scraper in PE - MD, color blue in semi-hard, somewhat flexible design. For process engineering in the field of filter presses. to remove the filter cake. Length: 410 mm Handle length: 210 mm Redpfx Aed Ey Rwsc Tscd Width 125 mm

Condition: new, Scraper in PE - MD, color blue in semi-hard, somewhat flexible design. Rcsdpfod Eyfpox Ac Tjd For process engineering in the field of filter presses. to remove the filter cake. Length: 410 mm Handle length: 210 mm Width 125 mm

Condition: new, Product: Scraper in PE - MD Color: orange - semi-hard and flexible Rcjdod Eyikjpfx Ac Tjd Other: For process engineering in the field of filter presses. to remove the filter cake Length: 410 mm Handle length: 210 mm Width: 125 mm

Condition: new, Scraper in PE - HD, color red, resistant to hot water, high density, rigid For process engineering in the field of filter presses. to remove the filter cake. Redjd Ey R Nspfx Ac Tecd Length: 410 mm Handle length: 210 mm Width 125 mm

Condition: new, Scraping blades are used as tools for various purposes, including fine removal of chips, removal of old paint layers, and cleaning of soiled surfaces. Rjdoftm Slepfx Ac Tjcd When purchased, scraping blades are usually not immediately usable; they are simply a piece of steel sheet. To make them functional, a fine edge must first be ground. We offer fully functional, new scraping blades made of Swedish steel in thicknesses of 0.4 mm and 0.5 mm. If required, we will gladly grind your "used" or "new" scraping blades and restore them to a functional state. Contact us. We will be happy to provide you with a quote for new scraping blades, either ground or unground, and/or a grinding service. We would be pleased to provide you with further information regarding scraping blades.

Condition: excellent (used), functionality: fully functional, Year of construction: 2009, Two used TEKA scrapers are offered. 1. THS 4020, built in 2009, scraper arm: 16.00 m, 2. THS 6022, built in 1993, scraper arm: 16.00 m. Fully functional. Rjdov Tb A Ispfx Ac Tecd For further information, see the rating plate.

Condition: ready for operation (used), Year of construction: 1998, Scraper capacity 20m: 108m³/h, outreach: 20m, boom angle of attack: 15°, slewing radius: 2080mm, clearing bucket width: 1170mm, volume: 1050l, steep angle: 320°, max. tractive force: 62kN, max. load torque: 322kNm, connected load: 47kW. Machine dimensions X/Y/Z: approx. 3200mm/2150mm/2350mm, weight: approx. 4600kg. On-site inspection is possible. Redpfsvf Iz Uox Ac Tscd

Year of construction: 1989, condition: ready for operation (used), Max. Operating pressure: 20 bar, max. temperature range: 120°C. Rjdpstphubofx Ac Tocd

Condition: used, Manufacturer: Terlet Model 900 Year: 2005 Condition: Used Serial number: 411225-001-001/002 Stock number: 3422 Capacity: 2 x 750 liters Heating: thermal oil Infeed height: 1500 mm Compressed air: 6 - 8 Bar Power: 3 x 400V, 50Hz, 4kW each Dimensions: 1350 x 1550 x 2350 mm each Weight: 900 kg each Includes inspection platform Pneumatic discharge valves Rsdpfxszqtcde Ac Tscd Mixing arm with scrapers and high-speed mixer with 2900 RPM.