Used Scrap Grab for sale (1,920)

Condition: new, functionality: fully functional, Year of construction: 2025, machine/vehicle number: MHB5202500000156, Scrap Grab for Terex Fuchs, Sennebogen, Liebherr 5 Tinned Model Djdpfx Aexryn Aji Ejwd 500 Liters Capacity

Year of construction: 1987, condition: like new (used), machine/vehicle number: 2008, ID AG 11 PEINER GREIFER Producer: Salzgitter Machinen u. Anlagen AG, Salzgitter Bad/Peiner SMAG Lifting Technologies GmbH Year of manufacture: 1987, good condition, Type 6231, Product MMGL2000-4, degree of protection IP44, Voltage 380V, Frequency 50 Hz, Control block OF-519-0-4-15N, Max pressure 180 bar, Load capacity/SWL 1600 kg, deadweight 2030 kg, content 2.0 m3 Mainly used in port operations as well as in waste incineration plants, steelworks and scrap yards The gripper type is suitable for handling scrap, ingots, rubbish, biomass and woodchips, among other things The PEINER grab volume corresponds to the internal volume when the trays are closed - the actual total payload is greater Worldwide service network PEINER are designed for cranes with power supply. Depending on your individual crane equipment, the gripper can either be attached directly to slewing gears or traverses. EFFICIENCY - multi-shell design for various goods handled: Example wood chips: Maximizing the filling volume with the least possible transport loss. Equipped with the latest shell design, PEINER MMGL are ideally suited for handling wood chips. They show perfect penetration, achieve an optimal filling volume and close cleanly. PERFORMANCE - High turnover volumes per loading cycle: Motorized orange peel grabs adapt to the material being handled with their individually driven shells. Transport losses are minimized. Optimal construction height, low center of gravity and the robust construction offer universal application possibilities of the PEINER MMG / MMGL series. PEINER MMG / L have extremely short opening and closing times and thus optimize the number of possible loading cycles per hour. ECONOMIC EFFICIENCY - Low service costs: The maintenance points are easy to reach. In order to increase the operating times and to minimize the service effort, PEINER can be equipped with automatic central lubrication. RELIABILITY - your investment in the future: PEINER are the result of many years of experience in bulk handling, high quality components and modern manufacturing standards. Sales price 9.500 Euro + VAT, negotiable, FCA Oradea, Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Dodpehgg Eujfx Ai Eswd Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 2441.05, cutting force: 1,122 t, total width: 9,000 mm, total length: 19,000 mm, total height: 5,700 mm, overall weight: 320,000 kg, operating pressure: 350 bar, loading space height: 1,800 mm, cutting width (max.): 810 mm, DGUV certified until: 11/2026, ejection height: 850 mm, filling opening length: 7,500 mm, filling opening width: 2,300 mm, The described scrap shear from Leimbach, including the associated conveyor belt, is for sale. The machine is in operation. An inspection at our facility is possible by prior arrangement in 68219 Mannheim. In addition to the existing oil filtration system, an electrostatic oil purification system from Kleentek has been installed. The machine is available upon agreement. Further information is available upon request. Delivery terms: EXW Mannheim, Rheinauhafen. The dismantling of the goods and its subsequent loading onto the means of transport will be carried out at the buyer's expense and risk. The selling price and delivery terms are negotiable. The sale is exclusively to commercial customers. This offer is non-binding and is subject to a technical and legal review as well as a contractual agreement between the parties. Dodpfozzxbtex Ai Eswd

Condition: excellent (used), Year of construction: 2020, operating hours: 3,700 h, functionality: fully functional, A scrap shear in perfect condition is for sale. The machine can be inspected at any time. Dwodpfx Aj Aia S Dji Eod

Condition: new, Year of construction: 2024, functionality: fully functional, cutting force: 630 t, power: 110 kW (149.56 HP), total width: 2,400 mm, total length: 9,400 mm, total height: 3,800 mm, overall weight: 50,000 kg, cutting length (max.): 1,600 mm, type of input current: three-phase, Scrap Shear MS-6300mex (mobile version, with electrical motor) Diesel Generator 250KW is optional Modell: MS-63000e Cutting Power: 630t Blade length: 1600mm Output size: 500mm Dwodpfjr Ihzijx Ai Eed Power: 110 KW Capacity: 8-15 t/h Machine Weight: 39 t (+ Dieselgenerator 4t) Hooper size: 3900mm x 2400mm Information: Container Shear is used for economical scrap processing/ easy automatic operation/ energy saving/ cost saving/ no foundation needed. It can cut any kinds of scrap material. Different models for your choice. Machine is not suggested to cut high-carbon steel; axles; wire rope; pig iron; spring steel plate; rail; alloy steel; hub and so on... (these are not good for blades) Function: Scrap is filled into the hopper by means of a grab loader. Due to the horizontal movement of the holder and the scrap’s dead weight, it falls to the bottom of the loading chamber and into the cutting space. After having been compressed on the front wall, the scrap is cut by the horizontally-moving tool-holding side via the blades on the front wall. While the tool-holding slide is moving horizontally, the processed material is pushed out via the blades on the container’s front wall. While returning to the rear position, the loaded scrap moves under its own weight into the shears’ interior. The scrap shear machines are available with different design, depending on the customer requirements. The output size can be choose (only for new order).

Condition: new, Year of construction: 2025, Scrap Grapple, Scrap Grab, Multi Tine Grab for Scrap Capacity 0.6 m3 Dsdpjxryrbofx Ai Ejwd Model 5 Tinned Hardox 450 Wearing Plates Rotating Option

Year of construction: 2022, condition: new, Attachment suited for: Construction machines VERACHTERT 600L poliepgrijper orange peel grapple MATERIAL HANDLING EQUIPMENT ORANGE PEEL GRAPPLE / all types 0.3m3 to7m3 Robust design, lifting capacity and efficiency put GALEN Orange Peel Grapples on top of the pile in scrap handling and recycling. The grapple's four hydraulic tines penetrate deep into scrap piles and grab tight to move the maximum possible material in every pass. This grapple provides superior productivity and efficiency for material handling operators. 0.3m3 to 7m3 all types we manufacture The model on the picture is Hitachi ZX380 Djdpfxsn Tm Dxs Ai Eowd Capacity: 0.6m^3

Condition: used, MANFACTURER - PRO-ECO TYPE - PRECISION DOUBLE LOOP SLITTING LINE MATERIAL - GRAIN ORIENTED, NON-GRAIN ORIENTED, SILICON STEEL, COLD ROLLED STEEL SHEAR STRESS - 100,000 PSI - SILICON STEEL | 60,000 COLD ROLLED STEEL MAX YIELD STRESS - 80,000 PSI MIN YIELD STRESS - 30,000 PSI MAX COIL WEIGHT - 50,000 LBS ENTRY/EXIT MAX COIL WIDTH - 48" NOMIMAL (50" MAXIMUM) ENTRY/EXIT MIN COIL WIDTH - 8" ENTRY / 1" EXIT MAX COIL OD - 72" ENTRY / EXIT MIN COIL OD - 36" ENTRY / EXIT MAX STRIP THICKNESS - 0.025" IN - SILICON STEEL / 0.050" CRS MIN STRIP THICKNESS - 0.010" MAX CUTS - 32 LINE SPEED - 1200 FPM ELECTRICAL - 575 V, 3 PH, 60 CYCLE AIR SUPPLY - 80 PSI LINE DIRECTION - LEFT TO RIGHT MODE OF OPERATION - FULL LOOP DRIVE-SLIT, DOUBLE LOOP Dwsdpfszk Nitjx Ai Ejd LINE COMPONENTS: COIL CAR MANDREL UNCOILER PEELER TABLE ENTRY PIT GUIDE TABLES INTERMEDIATE GUIDES FELT STAND BEFORE ENTRY SHEAR ENTRY SHEAR SIDE GUIDES SLITTING HEAD BUTECH SCRAP CHOPPERS EXIT TABLE PRESSURE & TENSION ROLL STAND EXIT SHEAR RECOILER WITH OVERARM SEPARATOR EXIT COIL CAR ALSO AVAILABLE: INTEGRATED PACKAGAING LINE, INCLUDING: EXIT TURNSTILE DOWNENDER WEIGHT SCALE UNDER SEMI-AUTOMATED BANDING LINE 5/8" STEEL BANDING PICK AND PLACE STACKER MAX CAPACITY 6000 LBS PER SLIT COIL ROTATING CAROUSEL EXIT CONVEYOR SEMI-AUTOMATIC STRETCH WRAPPING MACHINE WEIGHT STATION CONTROLS, HYDRAULICS AND ELECTRICS FOR LINE

Condition: used, Year of construction: 2009, operating hours: 15,600 h, functionality: fully functional, cutting force: 800 t, total width: 6,400 mm, total length: 18,500 mm, total height: 4,600 mm, overall weight: 153,000 kg, year of last overhaul: 2024, Hydraulic scrap shear Taurus In very good condition. Djdpjzudwaofx Ai Eewd

Condition: good (used), Rope protection cage, for rope pulley, steel rope pulley, rope deflection pulley, crane rope, four-rope multi-shell grab, polyp grab, mechanical multi-shell grab, clamshell grab, ship unloading grab, scrap grab, garbage grab, rope grab, digging grab Dsdov Hbxiopfx Ai Eewd -Rope protection basket: Intermediate dimension 590 mm -Item No.: 1031 4130 -Type: ETL915-34a P.03 Mkran -Quantity: 1x rope protection basket available -Dimensions: 690/345/470 mm -Weight: 23 kg

Condition: good (used), Crane block, pulley, rope pulley, steel rope pulley, rope pulley for crane, pulley block, rope pulley with pulley block, wire rope pulley block, crane rope, four-rope multi-shell grab, polyp grab, mechanical multi-shell grab, shell grab, ship unloading grab, scrap grab, garbage grab, rope grab, digging grab -Rope pulley: Rope pulley 1 grooved Ø 570 mm Dedpfov Hmrnsx Ai Ejwd -Groove width: 50 mm -Hole: Ø 110 x 80 mm -Number: 4x pulley available -Price: per piece -Dimensions: Ø 570 x 80 mm -Weight: 42 kg/piece

Condition: good (used), Lubricating bolts for rope pulleys, steel rope pulleys, rope deflection pulleys, crane ropes, four-rope multi-shell grabs, polyp grabs, mechanical multi-shell grabs, clamshell grabs, ship unloading grabs, scrap grabs, garbage grabs, rope grabs, digging grabs, bolts, crane bolts, lubricating bolts -Grease bolt: Crane bolt type 75x145 M48 Dwjdpfx Aiev Illcj Eed -Shaft: Ø 59.6 mm -Number: 7 bolts available - Price: per piece - Dimensions: Ø 80 x 170 mm -Weight: 3.9 kg/pc.

Condition: like new (used), Year of construction: 2025, operating hours: 2,000 h, functionality: fully functional, A mobile scrap shear in new condition is for sale. Dedezlqgvepfx Ai Eewd Inspections can be arranged at any time.

Condition: used, 72”x 0.5” x 60,000Lb Braner Turret Type Loop Slitting Line Braner Turret Type Loop Slitting Line is used for coil metal cross cutting with maximum width 72”, maximum 0,5” metal thcikness and 60,000Lb coil capacity Make: Braner Year New: 1996 Material Thickness: .060″ – .500″ Material Width: 12″ – 72″ Coil Weight: 60,000Lb Line Speed: 120 – 250 feet per minute Coil ID: 20″ – 24″ Coil OD: 75″ Slitting Cap: .500″ / 4 cuts – .125″ / 40 cuts Entry L-Type Coil Car Hydraulic Lift & Traverse Self Contained Hydraulics Control Panel Mandrel Uncoiler Powered Hold – Down Roll Outboard Bearing Support Hydraulic Feed-Up Drive Water Cooled Brake Hydraulic Peeling Table Driven Entry Pinch Rolls Adjustable Edge Guides Entry Mechanical Crop Shear Two Turret Type Slitting Heads Arbor Diameter: 12″ Powered Arbor Adjustment Powered Head Rotation Motor: 100HP DC Drive Lots of Knives & Tooling Two (2) Scrap Winders Powered Open / Close Heavy Duty Design Looping Pit Cross Over Table Drag Board Tension Stand Material Feeding Table Recoiler Hydraulic Drum Powered Push Off Hydraulic Over-Arm Separator Outboard Bearing Support 300HP DC Motor Drive Exit L-Type Coil Car Hydraulic Lift & Traverse Self Contained Hydraulics Upgraded Siemens Digital Drives, Electrics, Controls, Knives & Tooling Dwjdpfx Aorn Sqhji Eed

Condition: used, Year of construction: 1992, operating hours: 10,150 h, This Eder mobile crane, model M 825 B, used in the sawmill, was manufactured in 1992 and has approximately 10,150 operating hours. The crane is equipped with a Hultdins SuperSaw tree grapple, including a saw, which can be used to move and shorten logs. Saw blade: 75 cm. Clamp: 58 cm. Rotor: 16,000 kg. Dsdeyzpg Aspfx Ai Eewd If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2024, operating hours: 5,400 h, functionality: fully functional, A scrap shear (Lefort Trax 650) in excellent condition is for sale. Viewings can be arranged by appointment. The machine is available immediately. Dwodpfjz Ak Dvex Ai Ejd

Condition: repair required (used), Year of construction: 1987, machine/vehicle number: 90071000, bale width: 300 mm, bale height: 300 mm, overall weight: 15,000 kg, Currently, the “lateral pressure” is stuck because material (sheet metal) has shifted and become wedged under the side block. Dwodpfx Aioy Tlzae Ejd

Condition: used, Slitting line McKay 60''x0.625''x100,000Lb Make: McKay Material Thickness: .065″ – .625″ Maximum Material Width: 66″ Weight Capacity: 100,000Lb Coil ID: 24″ – 30″ Exit ID: 30″ Coil OD: 90″ Maximum Speed: 450 fpm Dwedpfxjlwtzye Ai Eed Direction: L-R Pit Type Entry Coil Car Double Mandrel Uncoiler with Hold-Down Roll Hydraulic Peeler Driven Pinch Rolls Coil Flattener with 200HP Drive Slitting Head with 16″ Arbor Diameter 250HP Drive Knives & Tooling Two (2) Scrap Choppers Recoiler with Over-Arm Separator 250HP DC Drive Exit Pit Type Coil Car Electrics, Hydraulics Controls, Tooling

Condition: used, Slitting line SECO 60″ x 0.375″ x 50,000Lb (A3791) is perfect solution for longitudinal coil metal cutting into strips with maximum metal thickness 0.375” and maximum coil width 60” Cold Rolled and Hot Rolled Steel 18-60” Strip Width 2 Speed Gear Box 200-500 FPM Thickness: .032″-.375” Complete Line with the Following Components: L-Type Entry Coil Car 40,000# Max Coil Weight Uncoiler: Coil ID: 23-30.50” Coil OD: 72” Maximum Coil Weight: 40,000# Maximum Sliding Base Hydraulic Expansion Peeler and Hold Down Roll 5 Roll Coil Breaker Entry Adjustable Edge Guides Entry Crop Shear Slitting Head: 10” Arbors 40 HP Motor Drive 2 Scrap Winders Recoiler: Coil OD: 72” Max Coil ID: 24” 150HP DC Motor 3 Arm Exit Turnstile 40,000# per Arm Dsdpfxjtiy Nts Ai Eowd Motorized Turn Complete Line with Knives, Rubbers, and Spacers Controls, Hydraulics, and Electrics

Condition: ready for operation (used), Year of construction: 1987, functionality: fully functional, pressing force: 90 t, bale weight: 700 kg, type of input current: three-phase, total width: 220 mm, total height: 240 mm, overall weight: 23,000 kg, total length: 1,142 mm, filling opening width: 90 mm, filling opening length: 140 mm, bale width: 80 mm, bale length: 1,200 mm, bale height: 110 mm, tank capacity: 1,100 l, year of last overhaul: 2025, Equipment: documentation/manual, Paal Licon 250 SC Channel Baler Originally built for baling non-ferrous scrap, for the last 12 years this machine has been used at a packaging plant. It processed 700–800 tonnes of cardboard per month. Machine specifications: - Length: 11.42 m - Width: 2.20 m - Pressing force: 80 t - Bale/channel dimensions: 110 x 80 cm Dwodjxdnn Ijpfx Ai Ejd - Feed opening: 140 x 90 cm - Machine weight: 23 t - Dual high-efficiency cooling system designed for continuous 24-hour operation in a warm workshop environment The machine floor has been overhauled; the main ram/cylinder is just six months old. The knives for trimming excess material have been replaced and upgraded for faster and more efficient operation. In 2025, the hydraulic oil was changed, distribution valves serviced, and all rollers of the main plunger/plate replaced. The pressing ram has also been refurbished. Comes with plenty of spare parts. Equipped with upgraded electronics and control panel from 2018, fully operational and ready for immediate use. Operation via touchscreen display. Comprehensive photographic documentation from the dismantling process is available. Complete technical documentation (DTR) in Polish and electrical schematics included. Testing of the machine is possible on-site. Additionally available: - Roller bale discharge system with conveyors, tipper, weighing system, and bale storage (as shown in the photos), Or optionally: - Tipping elevator for emptying 1100 L or 660 L bins - PAAL KES1750 chain channel conveyor: width 1750 mm, horizontal section 8 m, inclined section 8 m.

Condition: used, Year of construction: 1988, operating hours: 6,422 h, 1988 | Caterpillar 613C | Used Scraper | 6422 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 57000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 48 inspection points 38 approved ✅ 10 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Immediately ready for use, with excellent starting and engine behavior. The machine runs very well overall; a minor leak was detected in the rotary drive of the shield - typical for devices of this construction year. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "41097 Equippo" is commonly used when looking up more details online. Dwsdpfx Aiezzz T Eo Eod 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: excellent (used), fuel type: diesel, color: blue, = Additional Options and Equipment = - Central lubrication system = Further Information = Model year: 2019 Drive: Wheeled Number of cylinders: 6 Unladen weight: 37,000 kg Body brand: FUCHS MHL 350 CE certification: yes Technical condition: very good Optical condition: very good FUCHS MHL 350 MATERIAL HANDLER Model year 2019 CE certificate Deutz 6.1 L6 Tier 4 Final EPA 160kW engine Boom reach 16 m, boom 8.5 m, stick 7.2 m Boom hose rupture safety device Cab: hydraulic cab elevation, Fuchs Fox Cab Air conditioning Superstructure: Standard Fuchs color Central lubrication Undercarriage: Mobile, 4 outriggers 8x new solid rubber tires 12.00-20 Lighting: various lights on boom, grab, and cab General Information: Type: Bridge crane Model year: 2019 Color: Blue Technical data Number of cylinders: 6 Fuel type: Diesel Gross weight: 37,000 kg Emission class: Stage IV FOLLOW US ON INSTAGRAM, FACEBOOK, AND TIKTOK TO SEE OUR VIDEOS OF TRUCKS/COMMERCIAL VEHICLES AND MACHINERY OFFERED FOR SALE WE SPEAK GERMAN WE SPEAK ENGLISH Dwodpfx Aeyhzpfsi Eed HABLAMOS ESPAÑOL

Condition: used, fuel type: gasoline, empty load weight: 8 kg, color: grey-black, gearing type: mechanical, Year of construction: 2025, NEW ROZZI POLYP GRAB WITH 6 OFFSET TINES FOR SCRAP AND BULK MATERIAL HANDLING WITH INTEGRATED ROZZI ROTATOR REF.: 24-ATT-18 MODEL: RTG250D Weight: 460 kg Lifting capacity: 1800 kg Capacity: 250 lt Except for errors and/or omissions Displayed prices are exclusive of VAT. Please contact our sales department for an updated price quotation and terms. For more information: Dwjdpfxoxzlzyo Ai Eed Loris: 3484773001 URL: #glispecialistidelloscarrabile SCARRABILI AURORA Operates in the purchase and sale of industrial and commercial vehicles, mainly specializing in the waste management sector. Specialized in trucks, trailers, and roll-off equipment. Immediate availability of over 50 trucks and more than 150 bins, containers with and without roll-off cranes. S.E.&O. Given the large number of ads and details listed, Aurora recommends verifying all data with our sales staff.

Condition: excellent (used), Year of construction: 2010, Liebherr GM10 Clamshell grab for 12–18 t Excavators for quick coupler - OilQuick OQ65 Year : 2010 Cutting Width: 600 mm Weight: Approx. 890 kg Dwodpfx Aioz Nxlys Esd Suitable Machines: Excavators from 12–18 t CE

Condition: like new (used), Year of construction: 2012, operating hours: 1,800 h, functionality: fully functional, total width: 2,500 mm, total length: 13,000 mm, total height: 3,000 mm, pressure: 630 bar, Equipment: cooling unit, We offer this like-new Moros 630 hydraulic shear, manufactured in 2012. Manufacturer: Moros Model: 630 Year of manufacture: 2012 Condition: Like new Type: Hydraulic shear If you have any questions or need more information, please do not hesitate to contact us. Dodpfx Aiezua Sgj Eowd