Scrap baler

Moros 630

Condition: refurbished (used), Year of construction: 2022, operating hours: 1,518 h, functionality: fully functional, power: 260 kW (353.50 HP), year of last overhaul: 2026, Basic Inventhor 6 package: Load-Sensing System Fuel tank, 500 liters Longitudinal belt: belt length 2,900 mm, belt width 800 mm centrally arranged lubrication strips 24V electrical control system - additional electric pump for operating the following functions when the engine is stopped: raise/lower/tilt rear belt, open/close comb flap, open/close comb, raise/lower folding chute complete radio remote control large side GRP maintenance doors easy-to-maintain engine compartment LED lighting package: engine compartment and rear hydraulically reversible fan wheel three-sided loading protection folding chute fire extinguisher maintenance ladder toolbox acoustic start-up warning Doppstadt telematics system paint: RAL2011 traffic orange Additional equipment: Drive train 260 kW - EV 2-axle semi-trailer chassis Shredding system Size L - 20 teeth Additional hydraulic connection 35 - 80 l/min Hydraulic drive Rear belt 7 m Over-belt magnet, neodymium Frame for over-belt magnet, 7 m Nsdpfx Afsxx N Dgjuslg Delivery date will be agreed upon.

Condition: not inspected (used), Year of construction: 1985, functionality: fully functional, pressing force: 50 t, bale length: 1,000 mm, bale width: 750 mm, bale height: 750,750,750 mm, bale weight: 500 kg, input voltage: 400 V, overall weight: 7,500 kg, oil tank capacity: 500 l, power: 30 kW (40.79 HP), empty load weight: 7,500 kg, input frequency: 50 Hz, Manufacturer: Paal Typ: Pacomat V Year of construction: 1985 Press power main press: 50 t Specific press capacity: 5 kg/cm² Feed channel: 1.000 x 720mm (l x w) Theoretic throughput rate: 200 cbm/h Bale size: 700 x 1.000 mm (w x h) length adjustable Nodpfsic Rl Dox Afuelg Driving motor: 30 kW Bale weight: approx. 500 kg Machine weight: approx. 8000kg The hydraulic unit is functional, the drive motor is in the removed state.

Condition: excellent (used), Year of construction: 2016, operating hours: 3,500 h, functionality: fully functional, cutting force: 500 t, total width: 2,600 mm, total length: 13,500 mm, total height: 4,310 mm, overall weight: 50,000 kg, year of last overhaul: 2025, type of input current: three-phase, operating pressure: 300 bar, Lefort 500 mobile unit - No vehicle registration documents/Not street legal - Very well-maintained unit Nodpfezum S Tox Afuslg - Boom length: 5000 mm - Scania Diesel Stage 3 engine - Available approximately April/May 2027

Condition: ready for operation (used), Year of construction: 2013, operating hours: 5,000 h, functionality: fully functional, machine/vehicle number: 01113, total width: 2,180 mm, total length: 12,200 mm, bale length: 500 mm, bale height: 400 mm, pressing force: 350 t, overall weight: 34,000 kg, Ecotecnica shear baler mod. 2535, year 2013, with approximately 5,000 operating hours, in good working condition and complete with documentation. Machine suitable for compressing and shearing ferrous scrap, including sections, sheet metal, and mixed scrap. Technical data: Shear force: 350 tons Operating hours: 5,000 Compression box length: 5.0 m Box width with wings open: 1.70 m Bale size: 500 x 400 mm Total length: 12.20 m Width: 2.18 m Weight: 34,000 kg Nodpfxsy Ibw To Afuolg Equipment: Iveco diesel engine, 172 HP Radio remote control Complete documentation Machine is fully functional and ready to use. Inspection and testing possible.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, fuel: liquefied natural gas (LNG), - 1x CHP unit Nsdpozazraefx Afuelg - As new - Control cabinet still in original packaging - Located in Genthin We are selling a CHP unit in as-new condition. It has never been used, and the control cabinet is still in its original packaging. It has never been used but has been regularly maintained and is fully functional. The CHP unit is located in Genthin and can be inspected at any time.

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: K08003, cutting length (max.): 650 mm, type of input current: three-phase, working width: 1,170 mm, input voltage: 380 V, NEWLONG 2036TS + 508HS Automatic Paper Bag Making Machine Manufacturer : NEWLONG Model : 2036TS + 508HS Year : 2008 Serial No. : K08003 Origin : Japan Condition : Good Working Condition Specifications • Bag Width : 200 - 360 mm • Bag Length : 260 - 590 mm • Cutting Length : 350 - 650 mm • Bottom Width : 70 - 210 mm • Max. Paper Roll Width : 1,170 mm • Production Speed : Up to 180 bags/min Main Features • Full Servo Controlled System • Gearless Drive • Shaftless Unwinder • Automatic Roll-fed Operation • Concealed Flat Paper Handle Unit (508HS) • High Precision Photo Cell Registration • Fast Size Changeover • Stable High-speed Production The machine is in good operating condition and can be inspected under power. Nodpezmq T Ejfx Afuslg Inspection and test run are available upon request. Please contact us for additional photos, videos, or quotation.

Condition: like new (used), Year of construction: 2024, For sale: 8-colour offset printing press RMGT 970PF-8, configuration 8/0 or 4/4, with convertible perfecting unit. The machine is designed for high-quality industrial printing and is equipped with an extensive range of automation systems, including presetting, register control, cleaning systems, and colour measurement. Main technical specifications: Maximum paper size: 650 × 965 mm Minimum sheet size: 290 × 410 mm Minimum sheet size in perfecting mode: 370 × 410 mm Maximum printing area: 640 × 930 mm Maximum printing area in perfecting mode: 630 × 930 mm Maximum printing speed: 15,000 sheets/hour Stock thickness: 0.04–0.5 mm Plate size: 700 × 945 × 0.30 mm Feeder pile capacity: 1,100 mm Delivery pile capacity: 1,100 mm Machine dimensions L × W × H: 12,960 × 3,453 × 2,011 mm Equipment and features: PCS-G Printing Control System Rotary stream feeder Static eliminator on delivery Mechanical double-sheet detector Vacuum suction-type feeder board Paper size preset system Registration device Vertical and lateral image micro-adjustment Ultrasonic double-sheet detector Slewed sheet detector Side lay detector Front-lay Bernoulli device Side lay preset Printing, inking and dampening units: Nsdpfxjy S S Azj Afuolg Straight edge plate clamp with positioning pins Infed lower swing gripper feed drum Gripper margin: 10 mm Remote control for vertical, lateral and diagonal register 19 inking rollers, including form rollers 4 dampening rollers R-matic dampening system Oscillating bridge roller Double-double-single perfecting cylinder configuration Delivery section: Static eliminator Chain gripper delivery Delivery jam detector De-curler device Board insertion device Powder sprayer High pile delivery Delivery area sensor Paper size preset system Paper guide under the first delivery drum Delivery belt guide Belt-type vacuum slow-down wheels Additional options: Automatic feeder pile lateral alignment function Blower guide under the swing Pneumatic pull side guide Feeder air preset Impression pressure preset Impression cylinder cleaning function Feed drum fan-out adjustment mechanism Automatic blanket cleaning device Automatic ink roller cleaning device Smart-FPC plate changing device Ink form rollers 1st–3rd oscillating Hollow rollers for ink roller temperature control system R-matic_D remote ON/OFF Technotrans alpha.c chiller with alcohol density control Photo-type delivery pile lowering sensor Delivery fan antistatic eliminator PPC Server III for CIP-4 file transfer Press information display LithoFlash® Inline RMGT 970 Recto Verso automatic inline measurement system LithoFlash software package: LithoDyn ADR, LithoDyn JobChange, LithoFlash OneShot Machine raised by 200 mm The machine has CE marking, safety covers, tools, and documentation in English. The machine is sold in its current condition and at its current location — “as is, where is”. Inspection is possible by prior arrangement. An excellent solution for printing companies requiring a modern, high-performance 8-colour offset press with 8/0 and 4/4 printing capability and advanced process automation.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 9,000 mm, travel distance Y-axis: 4,000 mm, travel distance Z-axis: 1,000 mm, The machine is in good technical condition, including a rotary table S 35, table dimensions 2850 x 3150 mm (photo in the attachment), 2 clamping plates, a HUI 50 swivel head, a tool magazine for 80 tools, and a Siemens 840 D control system. WRD 150 CNC Year of manufacture: 2008 Control system: SINUMERIK 840 D X-axis: 9000 mm Y-axis: 4000 mm Z-axis: 1000 mm W-axis: 800 mm Njdpfsy U Ndzex Afujlg Power: 60 kW Tool magazine capacity: 80 tools Clamping plates: 2, 6000x2000 mm Swivel head: HUI 50

Year of construction: 2024, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: 04344, BRAND NEW Leistritz ZSE Maxx Series (27 / 40 / 50) – 48 L/D – 0 Hours – Factory Wrapped! Technical Specifications Manufacturer: Leistritz Extrusionstechnik GmbH Models Available: ZSE 50 Maxx ZSE 40 Maxx ZSE 27 Maxx Year of Manufacture: 2024 Condition: 100% Brand New (Zero operating hours, completely unused, still in original factory packaging/wrapping) L/D Ratio: 48 L/D (All units upgraded directly by Leistritz with brand-new complete barrel sets and new shafts) All machines are with side feeders. Description Available for immediate individual or package sale: Three (3) pristine, 2024 Leistritz ZSE Maxx Twin-Screw Extruders (Models: ZSE 50 Maxx, ZSE 40 Maxx, and ZSE 27 Maxx). These machines were originally dedicated laboratory units held by Leistritz. To meet high-specification production requirements, Leistritz directly upgraded all three machines to a 48 L/D ratio. These OEM upgrades included a brand-new, complete barrel set and brand-new shafts installed entirely by the factory. All three machines are in 100% brand-new condition with zero (0) operating hours. They remain fully wrapped and packed in their original factory delivery boxes—they have never been opened, touched, or commissioned since arriving from Leistritz. Each machine is a complete, turnkey system supplied with its own high-end feeding setup, control architecture, and an extensive array of genuine auxiliary tools and spare parts. Scope of Delivery & Included Accessories (Per Machine) Feeding & Extrusion Setup Volumetric Feeder & Side Feeder (with dedicated side feeder trolley) Feed Ports Downstream & Die Attachments Strand Die Head, Die Plates, & Screen Carrier Plates Control & Electrical System Full Control Cabinet (including the Macrometer integrated into the operational panel) Complete set of Connection Cables & Cables for the Main Drive Comprehensive Spare Parts Kit for the control cabinet Vacuum & Degassing System Spare set of Screw Vacuum Pumps, Vacuum Hoses, & Vacuum Gauges Nsdey Ufk Rjpfx Afujlg Vacuum Pump Heating/Cooling Systems & Connection Hoses Sensors, Maintenance & Installation Melt Temperature & Melt Pressure Sensors Screw Mounting Device, Screw Extractors, & Cleaning Brushes Lifting Rods, Leveling Elements, & Corrosion Inhibitors Listing Summary for Buyers Available Models: ZSE 27 Maxx, ZSE 40 Maxx, ZSE 50 Maxx. Immediate Availability: Skip the massive factory lead times for a brand-new Leistritz line. OEM Guaranteed: All modifications and extensions to 48 L/D were performed officially by Leistritz. Pricing available for individual machines or as a complete 3-machine package. Photos of the packed crates and original documentation are available upon request.

Condition: ready for operation (used), Year of construction: 2009, operating hours: 8,500 h, functionality: fully functional, fuel: diesel, IDROMEC 650 diesel engine plus generator, ready to use Nlsdpfjyg Hcdjx Afusg