Used Scrap Baler for sale (606)

Condition: excellent (used), Year of construction: 2017, operating hours: 12,450 h, machine/vehicle number: 1231, Lefort shear baler 330 Cuts steel and bales material Pjdpfx Aev I Utvsbmopl very good condition ,remote control included

Condition: new, Year of construction: 2024, Also, different models are available! IMPORTANT: MACHINE WILL BE BRAND NEW * Piston shafts will be induction-hardened and chrome-plated. Pjdpfxedfc Unj Abmopl * The pressing box will be HARDOX plates. * Pumps and valves used in the hydraulic system will be MARZOCCI brand. * The hydraulic valve control lever unit will be SALAMI or VALVOIL brand. * There will be automatic Oil Cooling/Heating Systems. * There will be an oil temperature control screen on the electric panel and an oil level control on the hydraulic oil tank. * The machine will be manually operated. * All electric-electronic material will be from the SCHNEIDER or SIEMENS brand. * Machine will be under AYMAS Makina San. ve Tic. A. Ş. Guarantee against manufacturing defects for one (1) year or 2.500 working hours whichever comes first. * The machine is CE and EAC certificated. The marking certifies that a product has met European Directives regarding consumer safety, health, or environmental requirements. SEE THE TECHNICAL DESCRIPTION BELOW Bale Size: 600mm x 400mm x ... Container Dimension (Width x Length x Height ): 620mm x 1.300mm x 620mm Capacity:

Condition: new, Year of construction: 2025, Also, different models are available! IMPORTANT: THE MACHINE WILL BE BRAND NEW The compression chamber walls are covered with HARDOX material for long-term life-cycle and friction resistance. A hydraulic Oil Cooling system is implemented for efficiency in hot climate conditions. Cylinder Rods are induction-hardened and chrome-plated. Pumps and valves of hydraulic systems are from worldwide reputable brands such as PARKER, and BOSCH-REXROTH. The machine is fully automatic by PLC control. It is easy to use with the help of the touch screen. All electrical and electronic parts are by SCHNEIDER and SIEMENS Brands. The machine is CE-certified. The marking certifies that a product has met European Directives regarding consumer safety, health, or environmental requirements. Machine will be under AYMAS Makina San. Ve Tic. A. Ş. Guarantee against manufacturing defects for one (1) year or two thousand five hundred (2.500) working hours. SEE THE TECHNICAL DESCRIPTION BELOW Bale Size 400mm x 400mm x... Bale Weight 100-180 kg (Steel), 40-100 kg (Aluminium),120-180 kg (Copper) Psdpfx Abod Iya Nomspl Press Box Dimensions (Width x Length x Height): 1.000mm x 2.600mm x 900mm Loading Bunker Dimensions (Width x Length x Height): 1.500mm x 2.200mm x 650mm Feeding Opening: 1.000mm x 1.600mm Capacity*

Condition: new, Year of construction: 2025, Also, different models are available! IMPORTANT: THE MACHINE WILL BE BRAND NEW Ppodpfx Abjdfcqasmjl The compression chamber walls are covered with HARDOX material for long-term life-cycle and friction resistance. A hydraulic Oil Cooling system is implemented for efficiency in hot climate conditions. Cylinder Rods are induction-hardened and chrome-plated. Pumps and valves of hydraulic systems are from worldwide reputable brands such as PARKER, and BOSCH-REXROTH. The machine is fully automatic by PLC control. It is easy to use with the help of the touch screen. All electrical and electronic parts are by SCHNEIDER and SIEMENS Brands. The machine is CE-certified. The marking certifies that a product has met European Directives regarding consumer safety, health, or environmental requirements. Machine will be under Aymas Makina San. Ve Tic. A. Ş. Guarantee against manufacturing defects for one (1) year or two thousand five hundred (2.500) working hours. SEE THE TECHNICAL DESCRIPTION BELOW Bale Size 400mm x 400mm x... Bale Weight 120-180 kg (Steel), 50-80 kg (Aluminium),150-200 kg (Copper) Press Box Dimensions (Width x Length x Height): 1.000mm x 2.700mm x 900mm Loading Bunker Dimensions (Width x Length x Height): 1.650mm x 2.300mm x 800mm Feeding Opening: 1.000mm x 1.600mm Capacity*

Condition: new, Year of construction: 2025, Also, different models are available! IMPORTANT: MACHINE WILL BE BRAND NEW SEE THE TECHNICAL DESCRIPTION BELOW 1. Bale Size: 400mm x 400mm x... 2. Container Dimensions (Width x Length x Height): 1.000mm x 2.000mm x 800mm 3. Capacity: 4 tons/hour (Steel), 5 tons/hour (Copper), 2 tons/hour (Aluminium) 4. Cycle Time: 90 seconds ( Idle ) 5. Top Cover Cylinder Thrust: 90 tons 6. Preliminary Compression Cylinder Thrust: 150 tons 7. Main Compression Ram Thrust: 210 tons 8. Maximum Working Pressure: 300 bars Ppjdodfc Iyopfx Abmol 9. Electric Motor: 37 kW 10. Machine Dimensions (Width x Length x Height): 3.400 mm x 6.800 mm x 3.000 mm 11. Machine Weight: 18.000 kg 12. There will be an ejection door. 13. Repairable and four-edge-usable blades. 14. Container walls will be covered with HARDOX 450 - 500 material. 15. There will be an automatic SKF liquid lubrication system integrated into the compression chamber. 16. There will be an automatic SKF greasing system that will grease the bushings. 17. Piston shafts will be induction-hardened and chrome-plated. 18. Pumps and valves used in the hydraulic system will be by PARKER or EATON VICKERS & KAWASAKI brand. 19. Bypass filter will be added to the hydraulic system. 20. There will be an AKG Hydraulic Oil Cooling System. 21. All electrical parts will be SIEMENS or SCHNEIDER Brand. 22. The machine will be fully automatic with PLC control, PLC brand and model will be SIEMENS. There will be a touch screen SIEMENS HMI Simatic Panel with emergency buttons placed on some important points. 23. There will be blades from 2767 material (hardness 55HRC) at the borders of the top cover and the sides of the scrap chamber. 24. Machine will be under AYMAS Makina San. Ve Tic. A. S. Guarantee for 1 year or 2.500 working hours whichever comes first against manufacturing defects.

Condition: new, Year of construction: 2025, Also, different models are available! IMPORTANT: MACHINE WILL BE BRAND NEW Ppjdpfx Ajgwa T Robmel SEE THE TECHNICAL DESCRIPTION BELOW 1. Bale Size: 500mm x 500mm x... 2. Container Dimensions (Width x Length x Height): 2.000mm x 2.500mm x 1.100mm 3. Capacity: 15-20 tons/hour (steel) 4. Cycle Time: 90 seconds ( Idle ) 5. Top Cover Cylinder Thrust: 90 tons 6. Preliminary Compression Cylinder Thrust: 150 tons 7. Main Compression Ram Thrust: 300 tons 8. Maximum Working Pressure: 300 bars 9. Electric Motor: 2 x 75 kW = 150 kW 10. Machine Dimensions (Width x Length x Height): 10.000 mm x 10.000 mm x 4.000 mm 11. Machine Weight: 55.000 kg 12. There will be an ejection door. 13. Repairable and four-edge-usable blades. 14. Container walls will be covered with HARDOX 450 - 500 material. 15. There will be an automatic SKF liquid lubrication system integrated into the compression chamber. 16. There will be an automatic SKF greasing system that will grease the bushings. 17. Piston shafts will be induction-hardened and chrome-plated. 18. Pumps and valves used in the hydraulic system will be by PARKER or EATON VICKERS & KAWASAKI brand. 19. Bypass filter will be added to the hydraulic system. 20. There will be an AKG Hydraulic Oil Cooling System. 21. All electrical parts will be SIEMENS or SCHNEIDER Brand. 22. The machine will be fully automatic with PLC control, PLC brand and model will be SIEMENS. There will be a touch screen SIEMENS HMI Simatic Panel with emergency buttons placed on some important points. 23. There will be blades from 2767 material (hardness 55HRC) at the borders of the top cover and the sides of the scrap chamber. 24. Machine will be under AYMAS Makina San. Ve Tic. A. S. Guarantee for 1 year or 2.500 working hours whichever comes first against manufacturing defects.

Condition: new, Year of construction: 2025, MACHINERY WILL BE BRAND NEW The machinery is available to bale aluminum cans as well as steel cans up to 0.2 mm of the thickness and 3 liters of the volume. All electric-electronic materials will be from Schneider and Siemens Brand. The machine will be fully automatic with PLC control and a touch screen Siemens HMI Simatic Panel with emergency buttons. Machine will be under AYMAS Makina San. Ve Tic. A. S. Guarantee for one (1) year or two thousand five hundred (2.500) operation hours, whichever comes first. There will be an Oil cooling/heating system depending on the operation zone. MB 500 Magnetic Separator and VH (120-250) Vibration Hopper are optional for separating the scrap aluminum and steel cans and for getting rid of the dirt and dust in the scrap. Technical Specifications: Bale Size: 500mm x 330mm x ... Pjdpfxerc Dkqj Abmspl Container Dimension (Width x Length x Height): 500mm x 1.000mm x 330mm Capacity Up to 1.000 kg/hour (Aluminum) Up to 2.000 kg/hour (Steel) Bale weighs with a mechanic scale system: 10-20 kg Cycle Time: 30 seconds Top Cover Cylinder Force: 25 tons Main Compression Cylinder Force: 100 tons General Working Pressure: 225 bars Machine Dimensions (Width x Length x Height): 1.100mm x 4.200mm x 2.600mm Electric Motor: 18,5 kW Machine Weight: 5.000 kg

Condition: used, Year of construction: 1995, functionality: limited functionality, cutting force: 800 t, empty load weight: 190,000 kg, type of input current: three-phase, Arnold HS850 Scrap & Metal Presse Die Maschine befindet sich derzeit in transportbereitem Zustand. master cylinder cylinder force: 850 t press: 0.08m/s hold-down cylinder cylinder force: 100t / per cylinder feed cylinder: cylinder force:100t cover cylinder: cylinder force:100t main dimensions total length:16175mm total width:5200 total height: 6420 mm Dimensions: Passage width at the scissor stand: 800mm passage height at the scissor stand: 800mm total height: 6000mm weights: scissor stand with cutter bar: 60 ton feed device approx: 85 ton total weight: about 170 tons required amount of oil: 5200 liters connection value of the machine: 220kw Pjdpfx Ajh T Dctsbmopl If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: new, Year of construction: 2023, machine/vehicle number: 7YXXX, VIS G is the ideal and the most efficent solution for serap processing like stampings, trimmings, wires mostly recommended for the automotive industry, metal recyclers and non-ferrous metal remelting industry. Pjdpfxomqi Ako Abmspl

Condition: excellent (used), Machine: Used Lindemann Sobod 8 Metal Baler Bale size: 400mm x 400mm Specifications: see table Status: ready to use Condition: in very good maintenance condition Year of manufacture: unknown Power: electric Availability: March/April 2025 Ppodpexrz S Aefx Abmsl

Condition: used, Speed-Tech Equipment horizontal cardboard baler, bales are approx. 1200 lbs., 6' long x 36" wide x approx. 28" tall, 3 phase, in working condition, winning bidder responsible for proper removal. Ppjdpfxsxd D Nzj Abmsl

Condition: excellent (used), Year of construction: 2004, operating hours: 34,480 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 750 kg, overall weight: 19,000 kg, transport height: 3,300 mm, oil tank capacity: 750 l, power: 45 kW (61.18 HP), Technical data baler: Manufacturer Bollegraaf Typ HBK 100 Year of construction 2004 Hours of operation 34,480 hours Press power main press 100 tons Press power of pre-press max. 42 tons Feed channel 1,600 x 1,100 mm Filling volume 3.15 m³ Theoretic cycle time 22 sec. Theoretic throughput capacity up to 450 m³/hour Bale size 1,100 x 720 mm, lenght variable Driving motor 45 kW Connected load 60 kW Tying system 5-fold vertical, fully automatic Throughput rate at a bulk weight of 30 kg/cbm approx. 13 tons/hour bulk weight of 50 kg/cbm approx. 20 tons/hour bulk weight of 100 kg/cbm approx. 30 tons/hour Throughput rate with ruffler approx. 20 tons/hour Bale weight 550 up to 750 kg, depends on material Volume hydraulic oil tank 750 l SPS controller Telemecanique TSX Micro Transport dimensions only baler 10,900 x 2,320 x 3,300 mm (l x w x h) Machine weight baler approx. 19 tons Comments: Psdpfoxbgnhjx Abmspl Unlike the standard HBC press series from Bollegraaf, this machine does not have a pre-press flap but cuts the material between blades on the press ram and the counter blade in the frame. This makes it a cutting edge press, similar to a Paal, unoTech, etc. The press is in very good condition for its age, as it was used exclusively for compressing paper from document destruction. The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, cutting force: 700 t, power: 300 kW (407.89 HP), empty load weight: 115,000 kg, total width: 3,000 mm, total length: 17,000 mm, total height: 4,000 mm, overall weight: 91,000 kg, cutting length (max.): 7,100 mm, year of last overhaul: 2024, pressure: 360 bar, Taurus K773.L1E Psdpfx Aeuptmysbmopl Cutting force 700 tons Cutting width 950 mm ( blade 1000 mm ) Cutting height 650 mm Box 7100 mm rammer 900 kN Central lubrication system Included 300 kW drive power Revision 2024 (year of construction 2006) Revision includes the following work: - Replacing the HARDOX carriage guides - Replacing the carbon guides on the blade carriage - Installation of new knife seats top/bottom - Installation of new blades and screws top/bottom - Welding on the worn parts in the scissor mouth - Dismantling of both covers, fitting new hinges, fitting new shafts, reassembly - Overhaul of all 4 HPR 160D pumps at LINDE Poland - Sealing the valves on the left/right valve bank - Installation of new piston rod feed (180 x 8.29 m) - Installation of new feed guide bushes incl. sealing package - Overlay welding of feed block and hold-down device, followed by milling to size - Inspection of side cylinders, in some cases installation of new seal packs, if required - Replacing piston rods and honing pipes - General repair work on hydraulic pipes, clamps, in some cases - Replacement of damaged hoses - General repair work on structure, covers and platform construction - Repainting of the system - Steel frame for mounting the machine Ready for immediate use. Available from December 2024 with repainting

Condition: new, Year of construction: 2026, functionality: fully functional, New shear blades, for example for Lindemann LU 1010 Ppjdpjx R Ud Eefx Abmol Dimensions: 200x80x524, split version (see drawing) 8 pieces available / 2 sets Price per piece.

Condition: good (used), Year of construction: 2016, functionality: fully functional, Vertical baler HSM V-Press 1160 plus, year of manufacture 2016 Technical Data: Manufacturer: HSM Model: V-Press 1160 plus Year of manufacture: 2016 Pressing force: 55 t Drive power: 4 kW Idle cycle time: 25 s Filling height: 1115 mm Feed opening: 1195 x 650 mm Bale size: 1200 x 1100 x max. 1200 mm Ppjdpfx Aox Irw Robmjl Bale weight: 550 kg Dimensions: 1700 x 1800 x 2200 mm (W x D x H) Weight: 2430 kg Materials: Paper, cardboard, film The baler is in good condition. Operator's manual and CE declaration are available. Inspection can be arranged at any time, including under power. Upon request, we can also carry out test runs with your material for a handling fee. We are happy to answer your questions about the machine by phone from Monday to Thursday from 08:00 to 14:00. On Fridays we are available from 08:00 to 13:00. Please note: All technical data are based on the manufacturer's information. We do not assume liability for the given data or possible errors. Offer is subject to change, prior sale reserved, and may be revoked at any time. Inspections are possible by prior arrangement. Sale is ex works, prepayment required, without warranty or guarantee.

Condition: excellent (used), Year of construction: 2009, operating hours: 16,800 h, functionality: fully functional, cutting force: 600 t, power: 242.71 kW (329.99 HP), Lefort Mobile 600 Tons Shear force: 600 t Hold-down force: 120 t Pusher force: 180 t Lid closing force: 240 t Box height: 600 mm Box width: 800 mm Box depth: 6000 mm Available immediately Ppodpeuptrpefx Abmol

Condition: used, Year of construction: 2021, Field of application: Construction Please contact ATS Norway for more information Please provide reference number upon request: 20857 Specifications: Design: Mobile, mounted on a trailer easy transport and flexible operation Rotor: Diameter: 700 mm Length: 2,800 mm Variable speed: 0%u2013200 RPM Automatic rotation direction and cleaning system 140 flat knives (60x60x30 mm), replaceable and reversible 5 static counter knives, reversible F ring system: Automatic, hydraulic feeder Cutting technology: Progressive cutting for smooth and efficient material processing Engine and operation: Engine type: Diesel Brand: SCANIA DC 13 EURO 6 Power: 407 kW Emission system: Separate AdBlue tank Control panel: Touch screen %u2013 user-friendly and in accordance with EEC standards Remote control included Efficient material handling: Hydraulic raising/lowering of the feed hopper Rubber track with hydraulic outlet Overbelt magnet for efficient metal separation Psdpfswvzrysx Abmepl Weight: Total weight approx. 32,000 kg   Description: MOBILE INDUSTRIAL GRINDER %u2013 MAC-S 28%u201370 HYDRO MOBILE We offer a MAC-S 28%u201370 HYDRO MOBILE, specially designed for maximum performance and flexibility. Perfect for recycling, waste management or other coarse grinding. Can be delivered within a short time. Own weight: 32000 Model: 2021 Bano MAC-S 28-70 mobilkvern

Condition: good (used), Europress by CK. press force 30 t. Bale weight 280-320 kg Psdpfsycw Ebex Abmjpl

Condition: good (used), Verical baler with 30 t press force Ppsdpfx Absycw Dwemsl

Condition: used, Year of construction: 2020, operating hours: 2,530 h, Field of application: Construction Please contact ATS Norway for more information Please provide reference number upon request: 20719 Ppedpfxowrl U Ro Abmjl Specifications: Model year: 2020 Operating hours: approx. 2,530 Engine power: 129 kW Undercarriage: See photo Interchangeable jaws Includes one extra jaw for finer fractions Description:Arjes waste shredder, model year 2020, primarily used for processing wood and bark. Equipped with interchangeable jaws, and delivered with an additional jaw suitable for producing finer output fractions.Quick delivery available. Hours: 2530 Own weight: 14500 Model: 2020 Arjes Impaktor 250 Avfallskvern

Condition: ready for operation (used), Year of construction: 2010, Brand: HSM Model: V-Press 1160 plus Year of manufacture: 2010 Pressing force: 532 kN Voltage: 400 V Max. bale weight: up to 550 kg (depending on material) Bale dimensions: 120 x 110 x 120 cm Machine weight: 2,403 kg Machine dimensions: 180 x 157 x 298.5 cm Filling opening dimensions: 119.5 cm x 65 cm Condition: Very good! Checked for proper operation. FLITS Rental & Sales service: With every machine, we supply a bundle of baling wire (120 wires). Need additional bundles of baling wire? Request a no-obligation quote. At FLITS Rental & Sales, you choose speed, clarity, and reliability. We think along with you, respond immediately, and ensure that you quickly get the right machine. You are welcome to inspect the machines on site. We are located at: Schoterlandseweg 94, 8413NE Oudehorne. A visit is possible by appointment, so that we have ample time to inform you properly and show you the right machines. We are happy to assist you! Ppsdpfsyfnfksx Abmol Waste baler, paper baler, cardboard baler, plastic baler, waste compactor, recycling, textile baler, waste processing.

Condition: used, Year of construction: 2001, operating hours: 10,900 h, functionality: fully functional, A fully functional scrap shear is being offered for sale. Ppjdoyftwxspfx Abmel

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 112010, pressing force: 60 t, filling opening width: 550 mm, filling opening length: 1,160 mm, bale length: 1,200 mm, bale width: 800 mm, bale height: 1,100 mm, bale weight: 420 kg, total width: 1,400 mm, total height: 2,170 mm, total length: 1,890 mm, type of input current: three-phase, input voltage: 400 V, overall weight: 2,430 kg, power: 7.5 kW (10.20 HP), year of last overhaul: 2025, Brand: Dixi Ppjdpfownpyvex Abmol The stated price is exclusive of statutory VAT, ex works, and without packaging. The press is cleaned and function-tested. Technical details: Manufacturer: Dixi Type: 60S Bale format (LxWxH): 1200 x 800 x 1100 mm Bale weight: 340-500 kg External dimensions (LxWxH): 1890 x 1400 x 2170 mm Filling opening: 1160 x 550 mm Pressing force: 600 kN Throughput: 1 - 2 bales / hour Number of wire channels: 4 Weight of the press: 2,430 kg Power supply: 400 V / 50 Hz Power consumption: 7.5 kW Installation site: indoor / covered outdoor Serial number: 112010 Year of manufacture: 2011 We refer to the respective original documentation, which can be obtained directly from the manufacturer.

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 113889, pressing force: 60 t, filling opening width: 550 mm, filling opening length: 1,160 mm, bale length: 1,200 mm, bale width: 800 mm, bale height: 1,100 mm, bale weight: 420 kg, total width: 1,400 mm, total height: 2,170 mm, total length: 1,890 mm, type of input current: three-phase, input voltage: 400 V, overall weight: 2,430 kg, power: 7.5 kW (10.20 HP), year of last overhaul: 2025, Brand: Dixi The stated price is exclusive of statutory VAT, ex works and without packaging. The press is cleaned and function-tested. Technical details: Manufacturer: Dixi Type: 60S Bale format (LxWxH): 1200 x 800 x 1100 mm Bale weight: 340-500 kg External dimensions (LxWxH): 1890 x 1400 x 2170 mm Filling opening: 1160 x 550 mm Pressing force: 600 kN Throughput: 1 - 2 bales/hour Number of wire channels: 4 Weight of the press: 2,430 kg Power supply: 400 V / 50 Hz Power consumption: 7.5 kW Installation location: indoors / outdoors under cover Serial number: 113889 Year of construction: 2012 Podownpx Eepfx Abmspl We point out the respective original documentation, which can be obtained directly from the manufacturer.

Condition: reconditioned (used), Year of construction: 2002, operating hours: 44,590 h, functionality: fully functional, pressing force: 200 t, filling opening width: 1,020 mm, filling opening length: 2,000 mm, bale width: 1,100 mm, bale height: 1,100 mm, oil tank capacity: 3,100 l, power: 150 kW (203.94 HP), year of last overhaul: 2025, Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 112 Year of construction 2002, partially refurbished in December 2025 Operating hours 44,590 hours, stand December 2025 Press power main press 200 tons Specific press capacity 16,5 kg/cm² Feed channel 2,000 x 1,020 mm Filling volume 2,65 cm³ Theoretic throughput rate 795 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 75 kW Tying system 5-fold horizontal, full automatic Throughput rate at MSW approx. 48 up to 54 tons/h, depends on material Volume hydraulic oil tank 3,100 l Machine weight baler approx. 50,8 tons Scope of delifery: 1 piece baler MACPRESSE, type 111A 1 operating manual with CE declaration, electrical and hydraulic circuit diagram Comments: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Hydraulic oil tank emptied and cleaned • Oil and air filters replaced • New hydraulic oil filled • All hydraulic hoses replaced • Press ram dismantled, broken down into individual parts, mechanics made operational • Front two main rollers replaced • Knives on the press ram replaced • Main hydraulic cylinder dismantled, disassembled, cylinder tube and piston rod checked, complete seal set replaced • Counter knife in the frame replaced • Knife gap adjusted to approx. 3 mm • Upper steel guide rails in the frame on the left and right replaced. • Worn press base cut out, base plate replaced with wear-resistant HARDOX steel. • Binding and twisting unit dismantled, broken down into individual parts, mechanics made functional, all twisting shafts and ball bearings replaced. • All wire rollers in the needle heads replaced Ppedpfxox Dnb Uo Abmel • Wire knives cleaned and readjusted, chains greased and tensioned • All wire deflection rollers made operational • All door contact switches replaced • Wirbulator device dismantled, disassembled and made operational • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode, see our video for the machine function test. The documentation (BA, CE, electrical/hydraulic circuit diagram) is complete. Viewing is possible by appointment. We accept no liability for the technical specifications or any errors.