Baling press for paper and scrap

Paal Licon 250 SC

Condition: used, Year of construction: 1999, pressure 180 t chamfer lenght 3100 mm distance between columns 2550 mm throat 310 mm stroke 200 mm ajustment speed 80.0 mm/sec working feed 10.0 mm/sec return speed 58.0 mm/sec dayligth 385 mm table width 240 mm work height max. 885 / 1050 mm oil volume 180 ltr. total power requirement 15.0 kW weight of the machine ca. 9850 kg. range L-W-H 4200 x 1750 x 2450 mm from a maintenance workshop well-maintained condition (!!) Gedsxab Erspfx Abheui - in checked condition - machine video - ?v=o_t9BBMsNNs Equipment: - simple, conventional electro-hydraulic press brake * with torsion shaft for parallelism of the upper beam - electric back stop, with ball screws (X axis) * with 4x manually adjustable stop fingers * fine adjustment via handwheel at the front, with analog position display - electro-motor adjustment of the immersion depth (Y1 + Y2 axis) * with digital position display - swiveling operation, mounting side on the left - 1x set of upper tools - 1x rotatable MULTI V universal die block - 2x front / movable support arms - 1x freely movable 2-hand foot control - operating instructions (PDF)

Condition: used, Year of construction: 2004, functionality: fully functional, turning length: 1,000 mm, turning diameter over cross slide: 350 mm, TECHNICAL DATA Turning diameter: max. 465 mm Gusdpfx Aev Epzvjbhji Turning length: 1050 mm Diameter when turning: 680 mm Chuck diameter: 325 mm X-axis travel: 300 mm Z-axis travel: 1050 mm Control system: Fanuc Series 21I-TB Spindle speed range: Max. 3500 rpm Drive power: 33 kW Torque: max. 630 Nm Bearing diameter in the spindle: 120 mm Max. bar diameter: 90 mm Tailstock stroke: 850 mm Tool post stroke: 150 mm Rapid traverse X/Z: 30 m/min Number of tool positions: 12 positions Tool holder: VDI 40 Accessories: Chip conveyor Tool holders, chuck jaws

Condition: good (used), drilling depth: 1,500 mm, feed length X-axis: 2,000 mm, feed length Y-axis: 1,300 mm, feed length Z-axis: 1,500 mm, Manufacturer: TBT deep drilling technology Type: BW 250-S Control: SIEMENS 840D Year of manufacture: 2007 Drilling, Milling, Tapping for heat exchanger bases and plates Swivable A Axis + 25 to - 15 Degrees Filtration and Coolant system 1000 L Cip conveyor 2000 x 1200 height out put Milling tool changer Tower Station 20 positions Capacity ELB Drilling 3 - 35 mm Gujdpfx Abov A Uw Dshoi Capacity Milling 250 ccm/Min Feed rates all axis 15,000 mm/Min X-Y-W-Z Cutting hours approx. 15,000 Large tooling package Specifications Metric US Standard Max. Drill Ø steel 40 mm Drilling depth 1500 mm X - axis 2000 mm Y - Axis 1300 mm Z-axis 1500 mm W-axis 750 mm Table load 15000 Table dimensions / L x W or ø 1600 x 1200 mm Spindle mount HSK 63 Mk Spindle power 11 kW Speed 8000 Rpm Dimensions (estimate) Length 7200 mm Width 7800 mm Height 4250 mm Weight 23000 kg Please note: The information on this page is believed to be accurate and is provided by us and, where possible, from the manufacturer. The information is provided in good faith but accuracy cannot be guaranteed. Accordingly, it will not constitute a representation or contractual terms. We recommend that you check all important details.

Condition: excellent (used), Brand: DMTG DALIAN Model: CKE 6180 Z Cnc : FAGOR 8055 iT Turning diameter : 800 mm Turning length: 2.000 mm Center height over bed: 400 mm Face slide travel: 420 mm Longitudinal travel : 1.835 mm Gsdpfxeu U Htco Abheui Spindle bore: 100 mm Spindle speeds: 40-1000 rpm Feed in X : 0-4000 m/min Feed range Z direction : 0-8000 m/ min Turret : 4 estaciones Chuck diameter 4 jaw: 400 mm Quill stroke: 260 mm Voltage : 400 v Total power requirement: 18,5 kw Machine dimensions : 4.500 x 2.000 x 1.800 mm

Year of construction: 1992, condition: ready for operation (used), Working length: 4300mm, pressing force: 2000kN, connected load: 15kW, weight: 18t, including tools. Gusdpfxei Dx Sbj Abhoi

Condition: used, Year of construction: 2000, Manufacturer: STAM Model: Stam 2000-3 Year: 2002 Condition: Used Gusdpfxjywd Ake Abhei Stock number: 0395 Uncoiler – max. weight (ton): 30 ton Uncoiler – max. width (mm): 2,000 mm Uncoiler – min. width: 400 mm Uncoiler – outer coil diameter: 1,800 mm Uncoiler – hydraulic expansion: 508 mm min. 610 mm max. Straightener – strip width: 2,000 mm Straightener – max. strip thickness: 3 mm Straightener – min. strip thickness: 0.6 mm Straightener – number of rolls: 17 Straightener – roll diameter: 46 mm Electronic feeder – min. pitch: 250 mm, max. pitch: 4,000 mm.

Condition: good (used), Year of construction: 1991, x-travel 4000 mm y-travel 2500 mm z-travel 1200 mm Control FIDIA M30 spindle 37 kW turning speeds 4500 U/min column daylight 2300 mm dist. milling spindle - table surface 1250 mm taper ISO SK-50 table dimension - longitudinal 3000 mm table dimension - cross 1500 mm The Ingersoll-Bohle 5-axis portal milling machine is in good condition and can be can be inspected by arrangement with the seller. Accessories: - High-frequency high-speed spindle 3.8 kW with 25,000 rpm. Gjdpsvwgmgsfx Abhoui Description: - infinitely adjustable inclined axis milling head (speed 4500 rpm)

Condition: used, functionality: fully functional, Year of construction: 1995, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 14 mm, Equipment: safety light barrier, Hydraulic Shear Brand: Casanova Model: VC-26 Year: 1995 Guedpfxjwy Nhqj Abhei Power: 30KW New WEINTEK control installed in 2020. Cutting length: 3100mm Maximum cutting thickness (steel): 20mm Maximum cutting thickness (stainless): 14mm Throat: 500mm Cuts per minute: 8-18 Backgauge: 1,000mm Manual blade gap adjustment via side levers. Front safety laser.

Year of construction: 2005, operating hours: 14,300 h, condition: ready for operation (used), travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,270 mm, controller manufacturer: AMADA, controller model: AMNC-F (FANUC 180i-PB), overall weight: 18,000 kg, total height: 2,318 mm, punching force: 20 t, product length (max.): 5,526 mm, sheet thickness (max.): 3 mm, table width: 5,120 mm, number of axes: 5, This 5-axis AMADA EM 2510NT turret punch press was manufactured in 2005. It features a punching force of 200 kN, a turret capacity of 45 stations, and a maximum sheet size of 1270 × 5000 mm. The machine has a rapid traverse speed of 100 m/min on the X-axis and 80 m/min on the Y-axis. If you are looking to get high-quality punching capabilities, consider the AMADA EM 2510NT machine we have for sale. Contact us for further details. • X-axis rapid traverse: 100 m/min • Y-axis rapid traverse: 80 m/min • Maximum sheet size: 1270 × 5000 mm • Maximum material thickness: 3.2 mm mild steel • Maximum sheet weight: 50 kg (feed speed F1) / 150 kg (feed speed F4) • Positioning accuracy: ±0.07 mm • Turret capacity: 45 stations • Turret rotation speed: 30 rpm • Punching force: 200 kN • Hits per minute – 1 mm pitch (5 mm stroke): 780 hits/min • Hits per minute – 25.4 mm pitch, X-axis: 500 hits/min • Hits per minute – 25.4 mm pitch, Y-axis: 330 hits/min • Maximum stroke length: 37 mm • Connected load: 27 kVA • Air consumption – machine: 250 l/min • Air consumption – Air Jet vacuum: 250 l/min • Operating air pressure: 5 bar Guedoy S A Tkepfx Abhsi • Tooling visible in the photos • 4 tool cabinets • Technical documentation (manual scan) • Machine + included tooling package shown in the photos • Machine fully operational: Yes (replacement of one pneumatic hose required to eliminate a minor air leak) • Machine connected to power: Yes

Condition: used, Year of construction: 2007, turning length 2500 mm control Sinumerik 840 D spindle head A 11 tool numbers 48 swing diameter over bed slide 750 mm swing over bed 780 mm Guedpfx Abowwarujhoi c-axis 0,1-30 1/min diameter of quill 160 mm taper bore MK 5 tool length - max. 500 mm weight of tools max. 15 kg weight of the machine ca. 27 t dimensions of the machine ca. 8,4 x 4,0 x 2,5 m Technical details: Nominal turning length: 2,500 mm Swing diameter over bed slide: 750 mm Swing diameter over bed: 780 mm Working height: 1,300 mm Spindle head to DIN 55026: A 11 Bore through: 123 mm Diameter in front bearing: 200 mm Oriented spindle stop: 0-359 degrees Drive power at 100/60 % duty cycle: 37/45 kW Total speed range: 10-2,500 1/min Number of speed ranges: 2 Speed range I: 10-775 1/min Speed range II: 20-2,500 1/min Max. torque at 60 % duty cycle: 2,500 rpm. Torque at 60 % ED: 2,083 Nm (up to 186 rpm)