Used Scrap Baler for sale (1,530)

Year of construction: 2013, condition: ready for operation (used), A metal press RMH MB (Mini Baler) by RMH Diebels Recyclingmaschinen is offered. Filling box dimensions: approx. 815mm/350mm/510mm, bale size: approx. 350mm/200mm, pressing cycle: approx. 1min, cutting blades on three sides of the filling box, lid shear force: 20t, bottom ram force: 40t, operating pressure: approx. 220bar, machine dimensions X/Y/Z: approx. 2450mm/1200mm/1400mm, weight: approx. 1800kg. An on-site inspection is possible by appointment. Fodpfx Ahoxn Aays Uspp

Condition: new, Year of construction: 2025, functionality: fully functional, General Description: Specifically designed for grinding soft to medium-hard plastics. Fixed discharge pipe on the grinding bin. Outlet pipe with adjustable airflow and slanted cut. Automatic self-tensioning belt drive system (maintenance-free). Fodsxgn Ugspfx Ah Uopp Technical Specifications: Sound-insulated stainless steel hopper. Hopper prepared for magnet installation. Grinding chamber: 247 x 284 mm. Number of blades: 3 rotating – 2 fixed. Rotor diameter: 180 mm. Rotor design: Open. Rotor speed: 200 rpm / 50 Hz. Re-sharpenable blades. Screen hole size: 5 mm. Drive motor: 3 kW. Large flywheel providing additional cutting inertia for thick-walled parts. Throughput capacity: 35 kg/h (depending on material, part geometry, grinder size, etc.). Stainless steel collection bin (13 liters), suitable for manual or vacuum discharge. Notes: Stock Availability – granulators equipped with additional options: with magnet on hopper with antistatic capacitive sensor with discharge pipe

Condition: good (used), Year of construction: 2012, operating hours: 12,078 h, functionality: fully functional, pressing force: 88 t, filling opening width: 1,100 mm, filling opening length: 1,800 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 750 kg, overall weight: 30,000 kg, oil tank capacity: 2,000 l, power: 98 kW (133.24 HP), volume flow: 643 m³/h, Technical data baler: Manufacturer HSM GmbH + Co. KG, Germany Type VK 8818 R-FU Fodpfx Ahjxcngnj Uopp Year of construction 2012 Total operating hours: 12,078 hours, as of September 2025 Pump operating hours 6,616 hours (effective pump running time) Number of bales pressed: 65,792 bales, as of September 2025 Main press force 880 kN Specific pressing force 120 N/cm² Pressing force cutting edges free rammer 120 kN Dimensions of feed chute 970 x 1,800 mm Theoretical cycle time in idle mode 8.3 seconds Theoretical throughput capacity 643 m³/hour Bale dimensions 1,100 x 750 mm, the length is variable 600 up to 2000 mm Drive power 2 x 45 kW frequency-controlled Connected load 98 kW Total current consumption 192 A Fuse protection 250 A slow-blow 5-fold horizontal tying, fully automatic Throughput rates with a bulk density of 20 kg/cbm 12.86 t/hour Bulk weight of 50 kg/cbm 32.15 t/hour Bale weights with a bale length of approx. 1.2 m 650 up to 750 kg/bale, depends on materiel Hydraulic oil tank capacity 2000 litres PLC control Siemens S7-300 Siemens TP 700 control panel Press dimensions assembled 18,000 x 4,300 x 3.270 mm (l x w x h) Press dimensions with conveyor system 18,000 x 22,000 x 5,765 mm (l x w x h) Transport weight baler approx 30 t (Main press approx. 20 t, press channel with bale clamp approx. 10 t) Special machine equipment: Access locking by means of key transfer system Electro-hydraulic locking of the press carriage during the tying process so that the press plunger does not change position with highly expansive materials Additional optional equipment ordered: Frequency-controlled main drive, 2 x 45 kW, with up to 40 % energy savings compared to the standard motorisation 2 x 45 kW, with the same power output Manual switch-off or switch-on of the number of strapping wires to save on strapping wire for non-expansive material Cutting-edge frei rammer with 121 kN pressing force Sensory wire monitoring, with press switch-off in the event of wire breakage or wire end Bale chute Visual warning signal, mounted on the control cabinet Condition of the baler: The entire baling system (baler and conveyor belt) is in good, operational condition. Technical data for the chain belt conveyor: Manufacturer Stadler Anlagenbau GmbH Typ chain belt conveyor KF 1800 Year of construction 2012 Drive power 7.5 kW Belt speed 0.05 – 0.4 m/second Length of feeding conveyor 6,000 mm Height of side wall from feeding conveyor 400 mm Length of incline conveyor 9,000 mm Height of side wall from incline conveyor 800 mm Length of gooseneck 1,500 mm Incline 30° Nominal width 1,800 mm Useful width 1,700 mm Belt quality EP-500/4 Steel cleats on the rubber belt 50 x 50 mm Hollow pin chain, pitch 125 mm, rollers 36 mm Height of drive axle above ground 4,284 mm Overall height of conveyor belt 5,765 mm Transport dimensions of feeding conveyor approx. 7,000 x 2,200 x 1,250 mm (l x w x h) Transport dimensions of the incline conveyor 13,000 x 2,500 x 2,900 mm (l x w x h) Pit dimensions for the conveyor belt 14,765 x 3,260 x 1,250 (l x w x h) Scope of delivery: The conveyor belt, baling press with bale chute, and wire drawing stations are available for sale, but without the wire. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: reconditioned (used), Year of construction: 2008, operating hours: 23,000 h, machine/vehicle number: 00834, pressing force: 60 t, filling opening width: 1,100 mm, filling opening length: 1,315 mm, bale width: 1,100 mm, bale height: 720 mm, warranty duration: 3 months, power: 30 kW (40.79 HP), year of last overhaul: 2025, Equipment: documentation/manual, Bollegraaf Recycling Solutions, the original manufacturer of this Bollegraaf baler, hereby offers the following machine(s) A repaired HBC60 (30kw) Repaired – in very good technical condition Year of construction: 2008 Volume capacity m3/hr max. 365 334 321 301 Volume weight kg/m3 max. 15 30 50 80 Weight capacity T/hr max. 5.5 10 16 24 Bale weight 400 – 800 kg, depending on S.G. of material and bale length Bale length - adjustable Bale height - 720 mm Bale width - 1100 m Filling opening - 1100 mm x 1320 mm Max. size supply - 1500 mm x 1200 mm Fsdexck U Uopfx Ah Uepp Pressure force ram - max 60 tonf. Pressure force pre-press flap - max 25 tonnes Cycle time - 18 seconds Motor - 45 kW Motor Twistomat - 2.2 kW Motor counter pressure pump - 1.1 kW Following repairs have been done in our official Bollegraaf OEM Refurbishment Workshop: * Safety doors needle installation replaced with new * Ram wheels behind replaced with new * Bronze strip above ram replaced with new * Movable beam position switch ram replaced with new * Scraper above ram replaced with new * Sealing pre press cylinders replaced with new * New steel beams channel cylinder * nieuwe buisjes oplassen en wielen gangbaar maken * New pusher cylinder underneath vertical tying unit * Safety hatch behind needle installation replaced with new * Several cables and asi modules replaced with new * New air filter * New oil filters

Condition: good (used), Manufacturer: HSM Tip: HL 4010 Re Basket tilt arm missing, Fjdour N Huopfx Ah Uspp

Condition: refurbished (used), Year of construction: 1999, functionality: fully functional, pressing force: 71 t, filling opening width: 1,080 mm, filling opening length: 1,620 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 600 kg, total width: 3,450 mm, total height: 4,090 mm, total length: 10,020 mm, input voltage: 400 V, overall weight: 27,000 kg, noise level: 85 dB, pressure: 300 bar, transport height: 2,300 mm, power: 37 kW (50.31 HP), Fully automatic channel baler with pre-press flap available immediately. The machine includes a conveyor belt with a floor-mounted section. The baler is supplied in refurbished condition and the conveyor belt underwent a belt overhaul at the beginning of this year. The machine was taken out of production at the beginning of October and is currently stored in our facility. It can be demonstrated in operation at our location. This machine is particularly suitable for baling paper/cardboard and various types of plastics such as PET, HDPE, and big bags. Technical specifications baler: Fpedpfxjxl Rqbe Ah Uop Drive: 37 kW Press force: 71 tons Bale dimensions: 1100 x 720 x 1300 mm (length adjustable) Number of wires: 4 vertical Filling hopper dimensions: 1620 x 1080 mm Bale weight: up to 600 kg (depending on material) Capacity: up to 20 tons per hour (depending on material) Transport weight: 27,000 kg Technical specifications conveyor belt: Length of horizontal section: 3,000 mm Length of inclined section: 7,424 mm Angle: 29° Filling option: at floor level

Condition: reconditioned (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 91-01611001, pressing force: 16 t, filling opening width: 545 mm, filling opening length: 680 mm, bale length: 800 mm, bale width: 600 mm, bale height: 550 mm, bale weight: 80 kg, total width: 860 mm, total height: 1,680 mm, total length: 3,530 mm, overall weight: 1,200 kg, power: 3 kW (4.08 HP), Horizontal baler that can be loaded via a chute, allowing the use of a light barrier. Tying is done manually twice with strapping tape. Price proposals are welcome. Fpedpjv T R Utofx Ah Uop

Condition: new, Year of construction: 2025, Scrap Grapple, Scrap Grab, Multi Tine Grab for Scrap Fpjdpsxryrbefx Ah Ujp Capacity 0.6 m3 Model 5 Tinned Hardox 450 Wearing Plates Rotating Option

Condition: excellent (used), Year of construction: 2015, operating hours: 19,750 h, functionality: fully functional, pressing force: 100 t, filling opening width: 970 mm, filling opening length: 1,800 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 750 kg, oil tank capacity: 2,000 l, empty load weight: 33,000 kg, volume flow: 643 m³/h, Technical data baler: Manufacturer HSM GmbH + Co. KG, Germany Type VK 8818 R-FU Year of construction 2015 Operating hours 19,750 hours, as of July 2025 Number of bales pressed: 24,760 bales, as of July 2025 Main press force 1000 kN Specific pressing force 120 N/cm² Pressing force cutting edges free rammer 121 kN Dimensions of feed chute 970 x 1,800 mm Theoretical cycle time in idle mode 8.3 seconds Theoretical throughput capacity 643 m³/hour Bale dimensions 1,100 x 750 mm, the length is variable 600 up to 2000 mm Drive power 2 x 45 kW frequency-controlled Connected load 110 kW Total current consumption 213 A Fuse protection 250 A slow-blow 5-fold horizontal tying, fully automatic Throughput rates with a bulk density of 20 kg/cbm 12.86 t/hour Bulk weight of 50 kg/cbm 32.15 t/hour Bale weights with a bale length of approx. 1.2 m 650 up to 750 kg/bale, depends on materiel Hydraulic oil tank capacity 2000 litres PLC control Siemens S7-300 Siemens TP 700 control panel Press dimensions assembled 12,130 x 4,800 x 3.270 mm (l x w x h) Press dimensions with conveyor system 35,000 x 8,480 x 7,745 mm (l x w x h) Transport weight baler approx 33 t (Main press approx. 12 t, press channel with bale clamp approx. 10 t) Special machine equipment: Access locking by means of key transfer system Electro-hydraulic locking of the press carriage during the tying process so that the press plunger does not change position with highly expansive materials Additional optional equipment ordered: Frequency-controlled main drive, 2 x 45 kW, with up to 40 % energy savings compared to the standard motorisation 2 x 45 kW, with the same power output Manual switch-off or switch-on of the number of strapping wires to save on strapping wire for non-expansive material Cutting-edge frei rammer with 121 kN pressing force Sensory wire monitoring, with press switch-off in the event of wire breakage or wire end Bale chute Visual warning signal, mounted on the control cabinet Condition of the baler: The entire baling system (baler and conveyor belt) is in good, operational condition and is cleaned, lubricated and maintained by the operator on a weekly basis in accordance with the manufacturer's specifications. Technical data for the chain belt conveyor: Manufacturer Stadler Anlagenbau GmbH Typ chain belt conveyor KF 1800 Year of construction 2015 Fpedpexb Dvvsfx Ah Uop Belt speed 0,36 m/sec. Length feeding conveyor 7,000 mm Length elevating conveyor 14,500 mm Length goose neck 1,550 mm Grade 30° Nominal width 1,800 mm Effecting width 1,638 mm Height conveyor over all 7,745 mm Pit dimensions to conveyor belt 11,200 x 3,000 x 1,250 (l x w x h) Scope of delivery: The conveyor belt, the transverse distribution belt and the baling press are for sale, with bale chute but without wire pulling stations and without wire. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, High-performance baler MACFAB - BEMA type 650A Hydraulic press for packaging waste, recyclable renewable raw materials, secondary raw materials Manufacturer no. MF J0162 Year of manufacture 2021 Pressing force 50 tons. Press plate stroke approx. 1000 mm Cycle time per stroke approx. 40 sec. Pressing chamber floor area 1500 x 1100 mm Pressing chamber height 1650 mm Filling opening 1500 x 870 mm Filling height approx. 1250 mm Bale format 1500 x 1100 mm Bale height max. 1100 mm Hydraulic operating pressure 200 bar Motor power 5.5 kW Mains connection 400 volts, 50 Hz, 12 amps. - with two hydraulic cylinders - Door locking via threaded spindle with handwheel - Pressing operation only with the pressing chamber door closed - 2-hand operation for hydraulic tipping of the finished pressed bale - Free space for manual strapping - Standard industrial bales of 1500 x 1100 x 1100 mm are produced - the highly compressed bale is automatically tipped onto a pallet - only 62 operating hours Space requirement L x W x H 2120 x 1350 x 3220 mm Fedpfx Ahjvq Rtko Ujpp Height for transport with lowered hydraulic cylinders approx. 260 cm Weight 1.8 ton. The machine is in very good condition, as good as new. The press has a new price of EUR 22,200 net at BEMA The BEMA company also buys the packaging waste that you press into bales with this press.

Condition: defective spare-parts repository (used), Year of construction: 2013, Manufacturer: HSM Tip: HL 4010 Li Year of construction: 2013 The equipment is incomplete and is sold as a part Fault: Hydraulic pump missing Control is missing Fsdpfsur Ravjx Ah Uepp Power supply unit missing

Condition: like new (used), Year of construction: 2023, operating hours: 2,400 h, functionality: fully functional, machine/vehicle number: R40410, cutting force: 900 t, power: 371.43 kW (505.00 HP), empty load weight: 75,000 kg, COPEX REFLEX 900 ton mobile diesel shear baler (year 2023). Maintenance carried out by the manufacturer. Output: 10 to 22 t/h depending on the type of scrap to be sheared. Immediately available. Fpsdpfx Aoxg Ekfeh Uop

Condition: used, Please send inquiries exclusively via email or directly through Machineseeker. Overall dimensions L 4600 mm Fsdoxmwmljpfx Ah Ujpp Overall dimensions W 2500 mm Overall dimensions H 1600 mm

Condition: new, functionality: fully functional, Year of construction: 2025, machine/vehicle number: MHB5202500000156, Scrap Grab for Terex Fuchs, Sennebogen, Liebherr 5 Tinned Model 500 Liters Capacity Fpsdpfxoxryn Ao Ah Uep

Condition: excellent (used), Year of construction: 2004, operating hours: 34,480 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 750 kg, overall weight: 19,000 kg, transport height: 3,300 mm, oil tank capacity: 750 l, power: 45 kW (61.18 HP), Technical data baler: Manufacturer Bollegraaf Typ HBK 100 Year of construction 2004 Hours of operation 34,480 hours Press power main press 100 tons Press power of pre-press max. 42 tons Feed channel 1,600 x 1,100 mm Filling volume 3.15 m³ Theoretic cycle time 22 sec. Theoretic throughput capacity up to 450 m³/hour Bale size 1,100 x 720 mm, lenght variable Driving motor 45 kW Connected load 60 kW Tying system 5-fold vertical, fully automatic Throughput rate at a bulk weight of 30 kg/cbm approx. 13 tons/hour bulk weight of 50 kg/cbm approx. 20 tons/hour bulk weight of 100 kg/cbm approx. 30 tons/hour Throughput rate with ruffler approx. 20 tons/hour Bale weight 550 up to 750 kg, depends on material Volume hydraulic oil tank 750 l SPS controller Telemecanique TSX Micro Transport dimensions only baler 10,900 x 2,320 x 3,300 mm (l x w x h) Machine weight baler approx. 19 tons Comments: Fpodoxbgnhspfx Ah Usp Unlike the standard HBC press series from Bollegraaf, this machine does not have a pre-press flap but cuts the material between blades on the press ram and the counter blade in the frame. This makes it a cutting edge press, similar to a Paal, unoTech, etc. The press is in very good condition for its age, as it was used exclusively for compressing paper from document destruction. The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: excellent (used), Year of construction: 1994, pressing force: 12 t, bale length: 1,200 mm, bale width: 700 mm, bale height: 500 mm, bale weight: 450 kg, total length: 5,500 mm, The HSM AK 1200 automatic horizontal baler is equipped with an automatic binding system. The machine is in very good condition and regularly serviced. Manufactured in 1994, it was purchased from the original owner and is ready for use. The baler is started manually by a button or fully automatically using a photocell in the loading chute. Cutting blades mounted on the pressure plate cut the material and compress it in the baling channel. Once the desired length is reached (bale length adjustment is available), the bale is automatically tied after several baling cycles. The bale can be tied with wire, twine, or polypropylene tape. Automatic baling system with a 12-ton pressure for economical volume reduction of residual (recyclable) materials in industry and retail: Cardboard Tetra packs Films Foams PET bottles Insulation mats and other compressible materials. Baling pressure: 120 kN Bale size: 700 x 500 x 600 - 1200 mm Bale weight (depending on material): 280-450 kg Transport length: 5.5 m Weight: 3500 kg Fjdpfjxmgm Ujx Ah Uspp Drive power: 7.5 kW Transport costs depend on weight, volume, and, above all, distance. The following information is important for inquiries: Delivery address (postal code and city name), but further details require a phone call. Therefore, please inquire about transport costs and other delivery methods by calling us.

Condition: excellent (used), functionality: fully functional, Safe Waste Compactor Hydraulic waste compactor that compresses directly into the waste storage container, easily adaptable for standard 1100, 660 (or 770*) litre, 4-wheeled, lidded – most often green – bins (Sulo, Otto, Schäfer, etc.). For bagged and bulk waste Compression ratio is between 1:4 and 1:8 depending on the waste composition, saving approximately 75% in waste transportation costs. Safe design Fsdpsxmbg Nsfx Ah Uepp ORWAK bin compactors are robust and can be operated safely. During compaction, it is not possible to reach inside the machine, ensuring operator safety. Both external and internal surfaces are easily accessible for quick and simple cleaning. The waste compactor can be used with all types of standard 1100, 660 (or 770*) litre plastic waste bins, whether with flat or semicircular lids! We can assist with transportation.

Condition: good (used), Manufacturer: Comp Tip: SB5 Engine: 2,2 KW Fpjdpfx Aheh Eic Aj Uop Cylinder stroke length: 500 mm Chamber size: 500 x 350 x 400 mm

Condition: excellent (used), Year of construction: 1996, pressing force: 30 t, input voltage: 380 V, bale weight: 600 kg, type of input current: AC, overall weight: 3,000 kg, Manufacture: Philadelphia Tramrail Model: HT30036 Fpsdom Amk Nopfx Ah Uop Vintage: 1996 400V/45A, 3 phases, 15kW 180 bar system pressure 206 bar maximum system pressure Made of heavy-duty structural steel Average cycle time of 53 seconds Dimensions: 1980 x 1050 x 3860mm Advance height: 1400mm Baling chamber: 1600 x 760

Year of construction: 1990, condition: good (used), strip width: 900 – 2.050 mm Fsdpfx Ahebicbzs Uepp strip thickness: 1 – 6 mm edge strip width: 5 – 50 mm material (strength): 1.000 N/mm²

Condition: excellent (used), Year of construction: 2006, Balemaster Year: 2006 Fpjdpfx Aherdwlke Uop Type: CMG 268 Waste compactor

Condition: good (used), Manufacturer: MBT Tip: MV-250 S Motor: 5,5 kW Fpedpohzr U Iefx Ah Uep hopper size: 780 x 600 mm Housing size: 3500 x 1000 x 2200 mm

Year of construction: 1990, condition: good (used), strip width: 900 – 2.050 mm strip thickness: 1 – 6 mm edge strip width: 5 – 50 mm Fpjdpfxjgrug Aj Ah Uop material (strength): 1.000 N/mm²

Year of construction: 1979, condition: good (used), strip width: 600 - 1.600 mm Fpodjgnyglopfx Ah Usp strip thickness: 0,4 – 2 mm edge trimming width: 5 - 60 mm speed: approx. 60 m/min

Year of construction: 1979, condition: good (used), strip width: 600 - 1.600 mm Fedpfx Aegrug Rsh Uspp strip thickness: 0,4 – 2 mm edge trimming width: 5 - 60 mm speed: approx. 60 m/min