Used Scrap Baler for sale (591)

Condition: new, Year of construction: 2024, functionality: fully functional, cutting force: 630 t, power: 110 kW (149.56 HP), total width: 2,400 mm, total length: 9,400 mm, total height: 3,800 mm, overall weight: 50,000 kg, cutting length (max.): 1,600 mm, type of input current: three-phase, Scrap Shear MS-6300mex (mobile version, with electrical motor) Diesel Generator 250KW is optional Modell: MS-63000e Cutting Power: 630t Blade length: 1600mm Output size: 500mm Power: 110 KW Capacity: 8-15 t/h Machine Weight: 39 t (+ Dieselgenerator 4t) Hooper size: 3900mm x 2400mm Information: Container Shear is used for economical scrap processing/ easy automatic operation/ energy saving/ cost saving/ no foundation needed. It can cut any kinds of scrap material. Different models for your choice. Todpfx Aqer Ihzisxea Machine is not suggested to cut high-carbon steel; axles; wire rope; pig iron; spring steel plate; rail; alloy steel; hub and so on... (these are not good for blades) Function: Scrap is filled into the hopper by means of a grab loader. Due to the horizontal movement of the holder and the scrap’s dead weight, it falls to the bottom of the loading chamber and into the cutting space. After having been compressed on the front wall, the scrap is cut by the horizontally-moving tool-holding side via the blades on the front wall. While the tool-holding slide is moving horizontally, the processed material is pushed out via the blades on the container’s front wall. While returning to the rear position, the loaded scrap moves under its own weight into the shears’ interior. The scrap shear machines are available with different design, depending on the customer requirements. The output size can be choose (only for new order).

Condition: new, Year of construction: 2025, IMPORTANT: MACHINE WILL BE BRAND NEW * The cutting guillotine is made of cast steel and is more resistant to fracture, buckling, and abrasion. * Cast steel cutting ram is subjected to a stress-relieving process. * The bolts of the blades on the cutting ram are monitored by the automation system and they are constantly kept tight by the hydraulic tightening system. Fracture and wear of the blades are minimized with this system, and 5 tons of force is applied to each bolt of the blades. * A hydraulic clamping system is used on both the moving and fixed parts of the blades. * Friction surfaces are coated with HARDOX 450 & 500 to prevent wear. * The machine has a fully automatic PLC control and a professional remote controller. * All electric-electronic components used are Schneider and Siemens Brands. * Machine will be under AYMAS Makina San. Ve Tic. A. S. Guarantee for one (1) year or two thousand five hundred (2.500) operation hours, whichever comes first. Tjdpfx Aqedd Tp Rsxsa SEE THE TECHNICAL DESCRIPTION BELOW: Cutting Force: 700 Tons Side Compression Force: 2x120=240 Tons (each wing) Clamp Compression Force: 120 Tons Pusher Ram Force: 120 Tons Electric Motor: 180 kW Machine Weight: 70.000 kg Cutting Width: 800 mm Box & Bale Size: 800 mm x 600 mm Box Length: 6.000 mm Box Width Opening: 350 mm Capacity: < 10 - 15 ton/h (Cutting Capacity), 15 - 20 ton/h (Baling Capacity)

Condition: new, Year of construction: 2025, - Cutting Force : 1600 Tons Tedpfx Aqjgv Acujxja - Capacity : up tp 70 tons per hour - Side Compression Force : 2 x 220 Tons - Clemp Compression Force : 250 Tons - Electric Motor : 480 kW - Machine Weight : 150.000 kg - PLC Controlled - Remote Control Avaliable - Output Length Adjustable

Condition: new, Year of construction: 2025, Also, different models are available! IMPORTANT: THE MACHINE WILL BE BRAND NEW An Inclined Shear is a heavy-duty machine used in metal recycling facilities to cut various types of scrap materials efficiently. • Mixed and heavy-duty scrap can be processed (HMS 1 & 2, cars, pipes, etc. ) • No scrap length limit • No operator needed • Cut length adjustment options • Electric and Diesel options • Stationary and semi-mobile options • Hydraulic blade tightening system • The guillotine is made of casting • A remote diagnostic system is implemented • Automatic lubrication • Good output density • Heavy-duty structure Todpegv Abpefx Aqxja • Chrome-plated & tampered shafts and sensitively honed cylinders • Special anti-wear plates • Reliable filtration system for the hydraulic oil • Reliable cooling system depending on the working climate • Top-brand hydraulic and electronic components The machine is CE-certified. The marking certifies that a product has met European Directives regarding consumer safety, health, or environmental requirements. Machine will be under AYMAS Makina San. Ve Tic. A. Ş. Guarantee against manufacturing defects for one (1) year or two thousand five hundred (2.500) working hours. SEE THE TECHNICAL DESCRIPTION BELOW Model: IS 1350 Cutting Force: 1.350 ton Hold Down Force: 250 ton Side Compression Force: 2x200 ton Cutting Width: 1.040 mm Number of Cuts: 2-3 cuts/min. Capacity up to 50 ton/h Weight: 128 ton Electrical Motor Power: 3x132 kW Chamber Dimensions: (W x L) 2,45 m x 8,5 m. General Dimensions: (W x L) 4,6 m x 11 m.

Year of construction: 2024, condition: new, - Cutting Force : 1100 Tons - Capacity : up tp 50 tons per hour - Side Compression Force : 2 x 120 Tons - Clemp Compression Force : 160 Tons Tedpfxjdfcpaj Aqxoa - Electric Motor : 264 kW - Machine Weight : 85.000 kg - PLC Controlled - Remote Control Avaliable - Output Length Adjustable

Condition: new, Year of construction: 2025, - Cutting Force : 700 Tons Tsdpfx Asgv Aacjqxoa - Capacity : up tp 20 tons per hour - Side Compression Force : 2 x 85 Tons - Clemp Compression Force : 100 Tons - Electric Motor : 160 kW - Machine Weight : 55.000 kg - PLC Controlled - Remote Control Avaliable - Output Length Adjustable

Condition: new, Year of construction: 2025, - Cutting Force : 900 Tons - Capacity : up tp 25 tons per hour - Side Compression Force : 2 x 120 Tons - Clemp Compression Force : 160 Tons - Electric Motor : 220 kW - Machine Weight : 78.000 kg Todpfxjgv Aa Ij Aqxsa - PLC Controlled - Remote Control Avaliable - Output Length Adjustable

Year of construction: 2024, condition: new, IMPORTANT: MACHINE WILL BE BRAND NEW All electric-electronic components used are Schneider and Siemens Brands. Machine will be under AYMAS Makina San. Ve Tic. A. S. Guarantee for one (1) year or two thousand five hundred (2.500) operation hours, whichever comes first. The cylinder rods, especially “hard chrome plated” for resistance against any damage, are induction hardened to maintain maximum strength. The “Off-The-Shelf” equipment used in the electric and hydraulic systems are from reputable worldwide brands and comply with the CE European standards. The body of the machine is constructed from “DIN St52” material. After welding they are stress-relieved and sandblasted before painting. SEE THE TECHNICAL DESCRIPTION BELOW Tedpfegv Ix Iox Aqxsa Electric Motors: 11 kW Machine Weight: appx 2.700 kg Cutting Speed: 5 cuts/min Blade Length: 620 mm Max. Working Pressure: 250 bars Cutting Force: 150 tons Machine Dimensions (Width x Length x Height): 750 mm x 2.500 mm x 1.300 mm

Year of construction: 2025, condition: used, Packaging machines, consisting of: 1x Rotary arm wrapper with top sheet applicator, type: B200E, manufacturer: TechnoWrapp 1x Ring wrapper, type: A800-4, manufacturer: TechnoWrapp 1x Rotary arm wrapper, type: CW 400E, manufacturer: CombiPack 1x Baler, type: BVP-950-HL1, manufacturer: Willems, Indion Todpjwk Dv Djfx Aqxja Technical details, equipment, photos, and operating time are shown in the attached description.

Condition: ready for operation (used), operating hours: 8,000 h, functionality: fully functional, machine/vehicle number: 36290, cutting force: 650 t, overall weight: 62,080 kg, table length: 6,000 mm, table width: 2,500 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Performance and forces Shear force: 650 t Power consumption: 200 kW Working range Chamber length: 6,000 mm Closed chamber width: 781 mm Loading table dimensions: 6,000 x 2,500 mm Todpow Nv Disfx Aqxja MACHINE DETAILS Weight including table: 62,080 kg Operating hours: 8,000 Note: The machine will be available from 01.03.2026.

Condition: good (used), Year of construction: 2005, functionality: fully functional, pressing force: 4 t, filling opening width: 730 mm, filling opening length: 400 mm, bale length: 700 mm, bale width: 350 mm, bale height: 500 mm, bale weight: 40 kg, total width: 988 mm, total height: 2,033 mm, total length: 752 mm, type of input current: AC, input voltage: 230 V, overall weight: 380 kg, noise level: 60 dB, power: 1.5 kW (2.04 HP), input frequency: 50 Hz, Fully functional and tested vertical baler for packing small quantities of cardboard or plastic. Tsdpfx Aqovy Drxoxja More information or photos by email or phone.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, pressing force: 30 t, Tested, cleaned, full service was carried out. Fully equipped, ready to use! Todpeyizpqsfx Aqxoa

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, pressing force: 50 t, Fully functional Bramidan B50 baler, serviced, complete set - hook, strap rolls. Tedpfx Aqsxg Tk Tjxoa

Condition: excellent (used), Year of construction: 2015, operating hours: 97 h, functionality: fully functional, pressing force: 10 t, Fully serviced, fully equipped and ready to use. New oil. 5 units in stock. Tjdpfsw Ey Dtjx Aqxsa

Condition: like new (used), Year of construction: 2024, functionality: fully functional, pressing force: 30 t, Used Bramidan B30 baler. Newly repainted. Ready for use, fully equipped, in perfect working condition. New oil. Tsdpfxoviymwo Aqxoa

Condition: excellent (used), Year of construction: 2012, Tested, cleanded, full service was made. New oil. Tsdsrxfn Ujpfx Aqxsa We have two Orwak 5030 balers. Last photo - green, refurbished 2017 - 2000 Eur.

Condition: ready for operation (used), Year of construction: 2003, Technical data of baler 18S: Motor: 4 kW Connection voltage: 400/50 V/Hz Pressing force: max. 180 kN Cycle time: 22 s Pressing time: 12 s Filling opening W x H: 107 x 62 cm Loading height from floor: 98 cm Tjdpfx Aora Aghsqxja Ejected bale* W x H x D: approx. 110 x 70 x 70-80 cm Bale weight: max. 120 - 180 kg Dimensions W x D x H: 152 x 95 x 197 cm Weight: 850 kg Year of manufacture 2003-2005 costs 3000 EUR Year of manufacture 2006-2009 costs 3500 EUR Year of manufacture 2010-2013 costs 4500 EUR Year of manufacture 2016-2018 costs 5000 EUR

Condition: good (used), Baler Hsm 155.1 vl Pressure force:, 18 tons, Tsdpsv Alacofx Aqxsa Unit pressure:, 2.33 kg/cm², Theoretical capacity:, 3 bales.h i.e. approx. 500kg/h Beam dimensions:, 1100x700x800 mm, Beam weight:, 150-250 kg, , Power supply:, 400 V/4 kW, ,

Condition: ready for operation (used), Manufacturer: HSM Model: VL 155.2 Dimensions (WxDxH): 1450 x 926 x 2400 mm Pressure: 16 t Filling opening: 1100 - 590 mm Filling space - 1100 - 700 x 1130 mm Bale size: 1100x700x950 mm Bale weight: 110 - 200 kg Connection: 400 V / 50 Hz Drive power: 4 kW Tjdov Ai Tgepfx Aqxea Rated current: 8.5A Binding: 4-fold vertically Vertical capacity: 4 - 8 bales/hour Machine weight: 940 kg Year 2001-2005

Condition: used, Year of construction: 2012, pressing force: 4 t, HSM V-Press 504 waste paper baler - used The HSM V-Press 504 vertical baler is a compact yet extremely efficient device designed for pressing cardboard and plastic waste. Thanks to its robust construction, simple operation, and modern control system, this model is the ideal solution for manufacturing companies, warehouses, stores, and logistics centers where significant amounts of packaging waste are generated every day. The baler, manufactured by the German brand HSM, ensures reliable operation and a long service life. Key advantages of the waste paper baler: 40 kN crushing force – effective waste compression, reducing volume by up to 95%. Efficiency and ergonomics – the crushing process starts automatically when the door is closed, and the piston returns to its starting position automatically. Modern control system – a microprocessor with a membrane keyboard and graphic text display ensures easy monitoring of the work process. Double door with lever – safe and convenient operation even with intensive use. Compact bales up to 60 kg – facilitate transport and storage of processed waste. Integrated bale ejector – increases operator safety and comfort. Energy-efficient operation – 1.1 kW motor allows for full functionality with low energy consumption. Stable, durable construction – guarantees reliability over a long service life. The offer applies to the HSM V-Press 504 waste paper baler: • Product code: MTP006524 • Product condition: used • Year of manufacture: 2012 Tjdpeyim Ayefx Aqxoa • Model: V-Press 504 • Width: 102 cm • Depth: 81.5 cm • Height: 193 cm • Weight: 290 kg • Power: 1100 W • Voltage: 230 V Net price: €2,859.00 per unit * I have large quantities available, with the possibility of negotiating the price for larger orders. * Transport possible throughout Europe. * The above offer does not include transport costs. * Location: Chmielów/Tarnobrzeg, Poland.

Condition: ready for operation (used), Year of construction: 2009, operating hours: 8,500 h, functionality: fully functional, fuel: diesel, IDROMEC 650 diesel engine plus generator, ready to use Tsdpfxoyg Hcde Aqxoa

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, BONFIGLIOLI SQUALO 950 WITH NEW ENGINE! Tjdpjyg Hhtofx Aqxoa

Condition: good (used), functionality: fully functional, machine/vehicle number: 004, bale weight: 5 kg, power: 3 kW (4.08 HP), empty load weight: 130 kg, Used THERMOPERS, model TO6 the compact plastic waste baler for soft thermoplastics, such as wrapping and shrink films, and to process it into bales. Serial number 004. The Thermopers is the solution to handle the plastic waste stream efficiently. The material can be loaded into the Thermopers directly. When the Thermopers is full it can be closed and started, the rest of the process is fully automatic and silent. The inserted material is compressed and sealed into an easy-to-handle package of approximately 5 kg. Characteristics The volume of the plastic films is reduced by 90% with the Thermopers. Thanks to the compact size of the Thermopers and the connection to a standard 230 Volt socket, the machine is easy to apply everywhere. The Thermopers is easy to operate and the status of the compaction process is clearly displayed by LED indication. The drive of the Thermopers is fully electric and low in maintenance. The size of a package is 60 x 30 x 10 cm and has a weight of approximately 5 kg. Operation The plastic waste material can easily be loaded into the machine via the insertion valve. When the machine is fully loaded, the insertion valve is closed and the machine is started. The plastic material is compressed by a combination of pressing and heating, whereby the outside of the plastic material is sealed around the package as a mantle. Thereafter the package is cooled, and the pressing mechanism will return. When ready, the machine gives an audio signal and the compacted package can be removed. After this the machine can be used again instantly. Advantages • Easy to operate • Fully automatic and silent • Compact machine • 90% volume reduction • Prevents drifting of material • Less storage • Less transport, resulting in a reduction in CO2 emissions Tsdper Dufbjfx Aqxsa • Higher returns / lower costs • Low maintenance • In accordance with machinery directive, CE marked Technical data Width: 70 cm Depth: 50 cm Height: 128 cm (excluding press rods) Height: 208 cm (including press rods) Weight: 130 kg Mains voltage: 230 Volts Power: 3 KW Energy consumption: approximately 1 kWh per package Sales price: 1.550 Euro + VAT, negotiable, FCA Oradea, Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 586, ΜΟΝΤΕΛΟ- C/A4 SCIVOLO 70 ΕΤΟΣ ΚΑΤΑΣΚΕΥΗΣ - 2006 ΑΡΙΘΜΟΣ ΠΛΑΙΣΙΟΥ - 586 Tjdpou Nvhzofx Aqxja ΤΥΠΟΣ ΜΗΧΑΝΗΣ - DIESEL

Condition: new, Year of construction: 2022, Layout: Shears Attachment suited for: Construction machines Metal shear / steel shear for steel cutting for excavators It has been designed for demolishing iron structures and for cutting different structural steels It has some unique properties Replaceable cutting knives Upper head and slewing ring Specially developed hydraulic cylinder The double hose connection For detailed information and price, please contact us Tjdpfxopa Rpbe Aqxoa