Used Scrap Winder for sale (757)

Condition: used, 72”x 0.5” x 60,000Lb Braner Turret Type Loop Slitting Line Braner Turret Type Loop Slitting Line is used for coil metal cross cutting with maximum width 72”, maximum 0,5” metal thcikness and 60,000Lb coil capacity Make: Braner Year New: 1996 Material Thickness: .060″ – .500″ Material Width: 12″ – 72″ Coil Weight: 60,000Lb Line Speed: 120 – 250 feet per minute Coil ID: 20″ – 24″ Coil OD: 75″ Slitting Cap: .500″ / 4 cuts – .125″ / 40 cuts Entry L-Type Coil Car Hydraulic Lift & Traverse Self Contained Hydraulics Control Panel Mandrel Uncoiler Cjdsrn Sqhopfx Aqvehd Powered Hold – Down Roll Outboard Bearing Support Hydraulic Feed-Up Drive Water Cooled Brake Hydraulic Peeling Table Driven Entry Pinch Rolls Adjustable Edge Guides Entry Mechanical Crop Shear Two Turret Type Slitting Heads Arbor Diameter: 12″ Powered Arbor Adjustment Powered Head Rotation Motor: 100HP DC Drive Lots of Knives & Tooling Two (2) Scrap Winders Powered Open / Close Heavy Duty Design Looping Pit Cross Over Table Drag Board Tension Stand Material Feeding Table Recoiler Hydraulic Drum Powered Push Off Hydraulic Over-Arm Separator Outboard Bearing Support 300HP DC Motor Drive Exit L-Type Coil Car Hydraulic Lift & Traverse Self Contained Hydraulics Upgraded Siemens Digital Drives, Electrics, Controls, Knives & Tooling

Condition: used, Slitting line SECO 60″ x 0.375″ x 50,000Lb (A3791) is perfect solution for longitudinal coil metal cutting into strips with maximum metal thickness 0.375” and maximum coil width 60” Cold Rolled and Hot Rolled Steel 18-60” Strip Width 2 Speed Gear Box 200-500 FPM Thickness: .032″-.375” Chedpfetiy Ntjx Aqvod Complete Line with the Following Components: L-Type Entry Coil Car 40,000# Max Coil Weight Uncoiler: Coil ID: 23-30.50” Coil OD: 72” Maximum Coil Weight: 40,000# Maximum Sliding Base Hydraulic Expansion Peeler and Hold Down Roll 5 Roll Coil Breaker Entry Adjustable Edge Guides Entry Crop Shear Slitting Head: 10” Arbors 40 HP Motor Drive 2 Scrap Winders Recoiler: Coil OD: 72” Max Coil ID: 24” 150HP DC Motor 3 Arm Exit Turnstile 40,000# per Arm Motorized Turn Complete Line with Knives, Rubbers, and Spacers Controls, Hydraulics, and Electrics

Condition: used, Material: 1095 High Carbon Steel Tensile Strength: 120,000 PSI Shear Strength: 96,000 PSI Thickness Range: .0045" - .025" Line Direction: Left to Right Cut Width & Thickness .0045" = 1/4" , 3/8" , 1/2" , 3/4" , 1" .0051" = 3/8" , 1/2" , 5/8" , 7/8" .0062" = 3/8" Line Speed: 1500 FPM Entry Strip Width: 18' Traverse Wider Coil Width: 8" Entry Coil ID: 15" - 22" Traverse Winder Coil ID: 11" Exit Coil ID: 16" Entry Coil OD: 54" Ribbon Wound Coil OD: 39" Exit Coil OD: 54" Entry & Exit Coil Weight: 10,000# Traverse Winder Coil Weight: 2250#` Complete Line With: Mandrel Uncoiler Hold Down Roll 3 Leaf Hydraulic Expansion 15 HP Drive Disc Drake Edge Control Unit Peeler Table / Deflector Roll Newcor Strip Welder with Planishing 2 Roll Material: 1095 High Carbon Steel Tensile Strength: 120,000 PSI Shear Strength: 96,000 PSI Thickness Range: .0045" - .025" Line Direction: Left to Right Cut Width & Thickness .0045" = 1/4" , 3/8" , 1/2" , 3/4" , 1" .0051" = 3/8" , 1/2" , 5/8" , 7/8" .0062" = 3/8" Line Speed: 1500 FPM Entry Strip Width: 18' Traverse Wider Coil Width: 8" Entry Coil ID: 15" - 22" Traverse Winder Coil ID: 11" Exit Coil ID: 16" Entry Coil OD: 54" Ribbon Wound Coil OD: 39" Exit Coil OD: 54" Entry & Exit Coil Weight: 10,000# Traverse Winder Coil Weight: 2250#` Complete Line With: Mandrel Uncoiler Hold Down Roll 3 Leaf Hydraulic Expansion Sliding Base 15 HP Motor 15 HP Motor Disc Brake Edge Control Cjdpoztc Tdefx Aqvehd Peeler Table / Deflector Roll Newcor Strip Welder with Planishing 2 Roll Bridal Unit for Tension Control Double Roll Tracking Roll for Strip Alignment 2 Sets of Rubber Coated Deflector Rolls Edge Guides Andritz Slitter Head New in 2016 5" Diameter Arbors 12 Sets of Quick Change Tooling Arbors Pre-Packed Arbors Shimless Tooling Anti Friction Bearings 25 HP DC Drive, 1750/2000 RPM Scrap Baller Recoiler 16" Diameter Drum 10,000# Coil Capacity 30 HP DC Drive Hydraulic Push-Off Hold Down Roll 21" Drum Face 1 Arm Exit Turnstile Vertical Strand Separator Aligns Strips after Exiting the Slitter Deflector Rolls 12 Oscillating Recoilers 11" Diameter Drums Hydraulic Push-Off Vertical Edge Conditioners S Bridal Strip Tension Rolls (2) Hydraulic Traversing Oscillating Wheel 7.5 HP Drive 1 Arm Exit Turnstiles Powerflex Digital Drives 755 Allen Bradley PLC Digital Drives Digital Readouts Central Hydraulic Units Operator Push Button Stations Slitter Tooling Hydraulics & Electrics

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 2441.05, cutting force: 1,122 t, total width: 9,000 mm, total length: 19,000 mm, total height: 5,700 mm, overall weight: 320,000 kg, operating pressure: 350 bar, loading space height: 1,800 mm, cutting width (max.): 810 mm, DGUV certified until: 11/2026, ejection height: 850 mm, filling opening length: 7,500 mm, filling opening width: 2,300 mm, The described scrap shear from Leimbach, including the associated conveyor belt, is for sale. The machine is in operation. An inspection at our facility is possible by prior arrangement in 68219 Mannheim. In addition to the existing oil filtration system, an electrostatic oil purification system from Kleentek has been installed. Csdpszzxbtjfx Aqvehd The machine is available upon agreement. Further information is available upon request. Delivery terms: EXW Mannheim, Rheinauhafen. The dismantling of the goods and its subsequent loading onto the means of transport will be carried out at the buyer's expense and risk. The selling price and delivery terms are negotiable. The sale is exclusively to commercial customers. This offer is non-binding and is subject to a technical and legal review as well as a contractual agreement between the parties.

Condition: used, The SAMO slitting line, 2001 processes material up to 1,000 mm wide and is integrated with the PROMEC packaging line, 2019. (N19). Installed electrical power is 451 kW; Area 365 sq Meters Capabilities include: Coil Inside Diameters: 400 / 500 Coil Outside Diameter: 1,500 mm Strip width: Entry: 350–1,040 mm Exit: 20–1,020 mm Thickness: 0.3–3.0 mm Line Direction; Left to Right Siemens S7-400 PLC Installation includes: Coil Stand- 3 Coils Uncoiler with Snub Control Roll Motor: 26.5 Kw DC Edge Control, EMG Paper Winder Peeler Table Pinch Roll Crop Shear Vollmer Contact Thickness Gauge, Slitter Head Motor Drive: 72Kw, DC 400 Volt Edge guiding with automatic adjustment before slitting head Horizontal guide rolls before slitting head Shaft OD: 180mm Slitting Knives OD: 280mm Scrap winder Edge guiding at exit Rotating tooling turnstile on rails – 4 sided with 2 arms per side Pit with Pit Car Tension stand: Tension stand on linear rails Material table with horizontal and vertical position 4 horizontal guide rolls – pneumatically engaged 3 Roll Tension bridle roll system as material break Bridle roll motor: 138kW DC Crop shear Material table Re-coiler: Full hydraulic drum Overhead separator arm Motor: 190kW DC drive Codpfx Aqoz Iq U Nsvohd Ground level L-Shape coil car with overhead hold down arm 4 – arm coil turnstile with push-off arm (5) Above ground Coil Cars All hydraulics and Controls PROMEC Packaging line: (See below) Underground coil car in front of Turnstile Scale PROMEC PACKAGING LINE, 2019 Layout Code: N19 Automatic packaging system serving the SAMO slitting line. Installed electrical power: 65 kW. Processes strip widths from 40–200 mm and thicknesses from 0.2–3.0 mm. Siemens S7-400 PLC First table: Tilting table with mandrel for coil handling Signode Strapping Machine Overhead Manipulator- Horizontal Coil Handling with expanding mandrels into ID or 3 arm OD clamping Packages eye to the sky or eye to wall. All hydraulics and Controls

Condition: ready for operation (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 30275651, product height (max.): 2,200 mm, The NOXON MAS 3 X5 314 is an advanced, self-propelled stretch wrapping robot designed for the automatic and efficient wrapping of palletized goods with stretch film. Thanks to its mobile design, the machine can move around the pallet, eliminating the need for a fixed wrapping station or turntable. This makes the robot particularly suitable for companies that want to wrap different types of pallets in various locations within their warehouse or production environment. Chsdpfx Aqo Ah H R Iovod The MAS 3 X5 314 stands out due to its dual, independently controlled pre-stretch motors. This allows the stretch film to be variably pre-stretched between 0 and 400%. The pre-stretch ratio and film tension can be adjusted via the control panel. This ensures that the film can be optimally adjusted to the type of load, weight, and desired stability. The machine features the advanced X5 control panel with a color touchscreen, which allows various wrapping programs to be easily set and adjusted. The operator can, among other things, determine the wrapping height, the number of wraps at the top and bottom, and the film parameters. This allows a suitable wrapping program to be compiled for each application. Thanks to the automatic pallet detection and adjustable wrapping parameters, the MAS 3 X5 314 ensures consistent and reliable packaging. Moreover, the N-Connect system enables real-time monitoring, processing, and archiving of machine performance and usage data. The combination of mobile deployment, advanced film control, and extensive programming options makes this stretch wrapping robot a suitable solution for companies that want to optimize their pallet packaging, control film usage, and increase the stability of their loads. Key features: - Self-propelled stretch wrapping robot: moves independently around the pallet without the need for a fixed turntable. - Dual pre-stretch motor: two independently controlled motors ensure variable and precise film pre-stretching. - Variable pre-stretch from 0 to 400%: adjustable according to the type of film and desired load stability. - X5 control panel: user-friendly 7-inch color touchscreen for setting and managing wrapping programs. - Adjustable film parameters: the film tension can be adjusted via the control panel. - Automatic height detection: detects the height of the pallet via a photoelectric sensor. - Programmable wrapping cycles: various parameters can be adjusted to specific packaging needs. - N-Connect: real-time monitoring, processing, and archiving of machine data. - Mobile deployment: suitable for different work zones and pallet sizes. The buyer is 100% responsible for the transport of the machine. We only place the machine on a pallet and secure it firmly.

Condition: used, MANFACTURER - PRO-ECO TYPE - PRECISION DOUBLE LOOP SLITTING LINE MATERIAL - GRAIN ORIENTED, NON-GRAIN ORIENTED, SILICON STEEL, COLD ROLLED STEEL SHEAR STRESS - 100,000 PSI - SILICON STEEL | 60,000 COLD ROLLED STEEL MAX YIELD STRESS - 80,000 PSI MIN YIELD STRESS - 30,000 PSI MAX COIL WEIGHT - 50,000 LBS ENTRY/EXIT MAX COIL WIDTH - 48" NOMIMAL (50" MAXIMUM) ENTRY/EXIT MIN COIL WIDTH - 8" ENTRY / 1" EXIT MAX COIL OD - 72" ENTRY / EXIT MIN COIL OD - 36" ENTRY / EXIT MAX STRIP THICKNESS - 0.025" IN - SILICON STEEL / 0.050" CRS MIN STRIP THICKNESS - 0.010" MAX CUTS - 32 LINE SPEED - 1200 FPM ELECTRICAL - 575 V, 3 PH, 60 CYCLE AIR SUPPLY - 80 PSI LINE DIRECTION - LEFT TO RIGHT MODE OF OPERATION - FULL LOOP DRIVE-SLIT, DOUBLE LOOP LINE COMPONENTS: COIL CAR MANDREL UNCOILER PEELER TABLE ENTRY PIT GUIDE TABLES INTERMEDIATE GUIDES FELT STAND BEFORE ENTRY SHEAR ENTRY SHEAR SIDE GUIDES SLITTING HEAD BUTECH SCRAP CHOPPERS EXIT TABLE PRESSURE & TENSION ROLL STAND EXIT SHEAR RECOILER WITH OVERARM SEPARATOR Chsdpfx Aozk Niteqvsd EXIT COIL CAR ALSO AVAILABLE: INTEGRATED PACKAGAING LINE, INCLUDING: EXIT TURNSTILE DOWNENDER WEIGHT SCALE UNDER SEMI-AUTOMATED BANDING LINE 5/8" STEEL BANDING PICK AND PLACE STACKER MAX CAPACITY 6000 LBS PER SLIT COIL ROTATING CAROUSEL EXIT CONVEYOR SEMI-AUTOMATIC STRETCH WRAPPING MACHINE WEIGHT STATION CONTROLS, HYDRAULICS AND ELECTRICS FOR LINE

Condition: refurbished (used), Year of construction: 2008, functionality: fully functional, Fully automatic side sealing machine for packaging products – regardless of their length – with full wrapping and without film overlap. The maximum output is 120 cycles/minute. Product feeding is performed via a conveyor belt while simultaneously inserting the product into a center-folded film through a forming shoulder. The infeed conveyor can be easily adjusted for different product widths. The film tube containing the wrapped, aligned products is completely sealed on the side via a side sealing unit. After the product is wrapped with film, transverse sealing is carried out by a continuously heated, follow-along sealing system. The height of the forming shoulder and sealing units is manually adjustable. The remaining film scrap is taken up by a film winder. Wearing parts and defective components have been replaced. The machine has been technically inspected by Kallfass and is fully functional. Technical data: Transverse sealing bar: 550 mm Film: center-folded film, approx. 12–80 µm Maximum film roll outer diameter: 400 mm Maximum film roll width: 600 mm Minimum product length: 120 mm Minimum product width: 80 mm Working height: 780–930 mm Codpfx Asw E Igvsqvohd Tunnel passage width: 450 mm Tunnel passage height: 200 mm Inspection and demonstrations are possible at our premises by appointment. Functional guarantee, no warranty.

Condition: excellent (used), fuel type: diesel, color: blue, = Additional Options and Equipment = - Central lubrication system = Further Information = Model year: 2019 Drive: Wheeled Number of cylinders: 6 Unladen weight: 37,000 kg Body brand: FUCHS MHL 350 CE certification: yes Technical condition: very good Optical condition: very good FUCHS MHL 350 MATERIAL HANDLER Model year 2019 CE certificate Deutz 6.1 L6 Tier 4 Final EPA 160kW engine Boom reach 16 m, boom 8.5 m, stick 7.2 m Boom hose rupture safety device Cab: hydraulic cab elevation, Fuchs Fox Cab Air conditioning Superstructure: Standard Fuchs color Central lubrication Cjdeyhzpfopfx Aqvehd Undercarriage: Mobile, 4 outriggers 8x new solid rubber tires 12.00-20 Lighting: various lights on boom, grab, and cab General Information: Type: Bridge crane Model year: 2019 Color: Blue Technical data Number of cylinders: 6 Fuel type: Diesel Gross weight: 37,000 kg Emission class: Stage IV FOLLOW US ON INSTAGRAM, FACEBOOK, AND TIKTOK TO SEE OUR VIDEOS OF TRUCKS/COMMERCIAL VEHICLES AND MACHINERY OFFERED FOR SALE WE SPEAK GERMAN WE SPEAK ENGLISH HABLAMOS ESPAÑOL

Year of construction: 2020, condition: excellent (used), functionality: fully functional, For sale: A Robopac Master Robot pallet wrapper in excellent condition. This mobile wrapper is ideal for efficiently and safely wrapping pallets of various sizes. The machine features a user-friendly control panel and operates on batteries, providing flexibility in use. Perfect for warehouses and production environments looking for a reliable and robust solution for pallet stabilization. The machine is well-maintained and ready for immediate use thanks to the new batteries. The charger is built-in. The wrapper was manufactured in 07-2020. Chodpfj Agwxzex Aqvod Comes with an invoice. We can also supply wrapping film. For more information or a video of the wrapper, please feel free to contact us. Trade-in possible: Trade-in of a (defective) pallet wrapper is negotiable. Also, check out my other listings or contact me to see which wrappers we have in stock. Keywords: pallet wrapper, film wrapper, wrapping machine, pallet wrapping machine, wrap machine, robot wrapper, wrapping robot, robot wrapper, wrapper, film wrapper.

Condition: excellent (used), Mobile pallet wrapper with film pre-stretch Inventory No. 4000 Manufacturer: Siat Type: BeeWrap 2100 - LP Year of manufacture: 2018 Technical data (approx.): * Wrapping height max. 2200 mm * Max. width unlimited * Min. width approx. 600 mm * Travel speed adjustable * Film width 500 mm * Core diameter max. 76 mm * Weight approx. 340 kg * Equipped with new batteries!!! * In very good condition! Cedps Ah H Ukjfx Aqvshd

Condition: like new (used), Year of construction: 2025, operating hours: 2,000 h, functionality: fully functional, A mobile scrap shear in new condition is for sale. Chsdpfxjzlqgvj Aqvsd Inspections can be arranged at any time.

Condition: repair required (used), Year of construction: 1987, machine/vehicle number: 90071000, bale width: 300 mm, bale height: 300 mm, overall weight: 15,000 kg, Currently, the “lateral pressure” is stuck because material (sheet metal) has shifted and become wedged under the side block. Chedoy Tlzaepfx Aqved

Condition: excellent (used), Year of construction: 2024, operating hours: 5,400 h, functionality: fully functional, A scrap shear (Lefort Trax 650) in excellent condition is for sale. Viewings can be arranged by appointment. The machine is available immediately. Cedpfez Ak Dvjx Aqvohd

Condition: excellent (used), Year of construction: 2008, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: 30762, spindle speed (max.): 3,000 rpm, type of input current: three-phase, total length: 10,000 mm, total height: 2,000 mm, total width: 5,000 mm, table length: 3,100 mm, drilling capacity: 40 mm, drilling depth: 130 mm, workpiece weight (max.): 7,500 kg, Plasma cutting machine for metals Manufacturer: Ficep Year of manufacture: 2008 Serial number: 30762 Codpfxjz Inhgs Aqvehd Technical specifications: Maximum workpiece width: 3,100 mm Minimum workpiece width: 400 mm Minimum workpiece length: 1,900 mm Maximum workpiece length: 6.4 m Maximum material thickness: 130 mm Maximum drilling diameter: Ø40 mm Maximum workpiece weight: 7,500 kg Plasma source: Hypertherm HPR260 Spindle speed: 180–3,000 RPM Minimum workpiece size: 200 × 150 mm Equipment: Complete line with motorized roller conveyors for feeding and removing material Approximate length of feeding conveyor: 8 m Approximate length of removal conveyor: 5 m Includes a wide conveyor for removing metal scrap.

Year of construction: 1986, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 530, Industrial Double-Drum Winder W04 – Winding Machine For sale: industrial W04 winding machine designed for winding flexible plastic products, profiles, tubes, cords, strips, or similar continuously extruded materials. The machine was previously used in production as part of an extrusion line. Basic information: Machine type: industrial winding machine Designation: W04 Year of manufacture: 1986 Double-drum design Drum 1 / Stop / Drum 2 / Reset controls Emergency stop button Traverse mechanism for even material distribution Adjustable operation Cedpfx Aqozu Nf Asvohd Electrical control cabinet IMO iSmart controller Lenze frequency inverter 24 V power supply Mounted on a mobile steel frame This is an older, robust industrial machine. The electrical system has been upgraded during its service life. Condition and equipment are shown in the photos. Suitable for further use in production, refurbishment, or as a base for a custom winding application. Location: Ivanka pri Nitre, Slovakia Price: €3,000 For further information or additional photos, please contact me via message.

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 4604060239, type of input current: three-phase, input voltage: 400 V, pressure: 6 bar, operating pressure: 6 bar, temperature: 35 °C, power: 11 kW (14.96 HP), input current: 20 A, Equipment: CE marking, documentation/manual, Automatic Pallet Winder fully operational, last used 12.2024. Wrapping speed appr 70-100 pall/h. All conveyors and safety cages included. Can pair with H&K Palletizer as a packing system to be negotiated. Chodoyrcf Sjpfx Aqvjd

Condition: used, Year of construction: 2009, operating hours: 15,600 h, functionality: fully functional, cutting force: 800 t, total width: 6,400 mm, total length: 18,500 mm, total height: 4,600 mm, overall weight: 153,000 kg, year of last overhaul: 2024, Hydraulic scrap shear Taurus Chsdpfx Aqozudwajvsd In very good condition.

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, blade shaft diameter: 240 mm, coil weight: 25,000 kg, type of input current: three-phase, input voltage: 400 V, product width (max.): 1,650 mm, sheet thickness stainless steel (max.): 5 mm, Stainless steel slitting line with NLT slitter-setup-robot — fully functional and in excellent condition. Basic Technical Specifications: - Material: Stainless steel - Material thickness: 0.3–3.5 (5 mm) - Material width: 400–1,650 mm - Line speed: max. 250 m/min. - Coil weight: max. 25 metric tons (unwinding and rewinding) - Coil outer diameter: max. 1,820 mm (unwinding and rewinding) - Coil inner diameter: 508 / 610 mm (rewinding with attachment) - Slitting shaft diameter: 240 mm - Blade diameter: max. 380 mm - Slitter drive: 201 kW - Rewinding recoiler drive: 212 kW Cutting capacity – stainless steel (max.): Thickness 0.3–1.0 mm: 25 strips Thickness 1.0–1.5 mm: 20 strips Thickness 1.5–2.5 mm: 14 strips Cedpfsztykgex Aqvehd Thickness 2.5–3.0 mm: 5 strips Thickness 5 mm: 2 strips System consists of: - 4-fold coil magazine - Coil car - Uncoiler with snubber roll – uncoiler movable - Paper winder - Strip edge control - Inserting device with bending roll - Pull-off stand - 5-roll straightening machine - Crop shear with scrap cart - Laminating frame - Slitter - Edge trimmer - 4-position blade changer - NLT slitter-setup-robot PRCS20 - Loop - Braking unit (plate) - Transfer table with separating shaft (automatic) - Recoiler - Coil car - 4-fold turnstile

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 04006, For sale is a stretch wrapping machine with a conveyor belt and scale. Chjdpfx Aqjwl Hp Nevsd The machine was in the shipping department. Several programs can be started directly on the machine or via a cable switch (operated from the forklift). Process: The package is placed on the roller table of the machine by a forklift. The machine starts at the push of a button, is wrapped automatically, the film is separated, the package moves along a roller conveyor to the unloading station, and is weighed. The package is unloaded from the unloading station by a forklift. All information is provided without guarantee. Sale to commercial customers only. Viewing by appointment in 94424 Arnstorf (Germany). Pickup in 94424 Arnstorf (Germany).

Condition: used, Year of construction: 2006, Overview This Tempo-Pack SATURN is a rotary stretch wrapper for pallet loads, built in 2006 and supplied as a complete end-of-line system: infeed roller conveyors, a top-sheet dispenser, the wrapping station and outfeed conveyors with a 90° turn in an L-shaped layout. It was designed for cartons on Euro and half pallets at an output of 60 pallets per hour. The film carriage rotates around the stationary pallet, so the load is not turned during wrapping. Technical data - Manufacturer: Tempo-Pack - Model: SATURN - Year of manufacture: 2006 - Output: 60 pallets per hour - Product: cartons on pallets - Pallet formats: 1,200 x 800 mm (Euro pallet), 800 x 600 mm (half pallet) - Maximum load footprint: 1,300 x 1,100 mm - Maximum load height including pallet: 1,800 mm - Maximum load weight: 1,500 kg - Conveyor height: 150 mm - Stretch film height: 500 mm - Top-sheet film width: 1,400 mm - Power supply: 3 x 400/230 V, 50 Hz, N, PE; 32 A - Compressed air: 6 bar - Machine height: 2,910 mm; minimum hall height 2,900 mm in the wrapper area - Layout footprint: approx. 13,590 x 6,750 mm Cedpfxe Ahgtio Aqvjhd Equipment - Rotary stretch wrapper with film carriage - Top-sheet dispenser ahead of the wrapper - Powered roller conveyors on infeed and outfeed, with a 90° transfer to the outfeed line - Control cabinet with touch panel operator interface - Safety fencing with access door - Layout drawing available Condition Used, functional and ready for operation. Viewing on site is possible by appointment. Availability Available immediately. Location: Germany.

Year of construction: 2026, condition: new, Bosporas Machinery is a manufacturer of coil processing lines, roll forming lines and press feeding systems, delivering high-performance and customized industrial solutions worldwide. Our compact coil slitting lines are designed for efficient and precise slitting of light and medium gauge materials. These systems offer flexible configurations ranging from entry-level compact lines to more advanced solutions with integrated straightening units. The lines are engineered to provide stable operation, consistent slit quality and optimized production efficiency while maintaining a compact footprint and cost-effective investment level. AVAILABLE CONFIGURATIONS 1 mm | 1300 mm | 4 Ton | Pitless Compact Slitting Line 3 mm | 600 mm | 6 Ton | Compact Slitting Line (Pinch Roller Feeding) 3 mm | 600 mm | 6 Ton | Slitting Line with Straightener Unit 3 mm | 1000 mm | 6 Ton | Compact Slitting Line (Pinch Roller Feeding) SYSTEM CONFIGURATION OPTIONS Depending on production requirements, the line can be supplied with: Straightener unit for improved material flatness and feeding stability Pinch roller feeding system for compact and cost-effective operation Single pit or pitless design based on layout requirements TECHNICAL RANGE Material Thickness: 0.3 – 3 mm Coil Width: up to 1300 mm Coil Weight: 4 – 6 Ton Slitting Accuracy: ±0.1 mm MAIN LINE COMPONENTS Hydraulic decoiler (expanding mandrel system) Coil loading system (optional) Infeed system with pinch rollers or straightener unit Slitting head with precision knife adjustment Scrap winder system Tension unit and separator system Recoiler with hydraulic mandrel Electrical control and automation system (HMI controlled) ENGINEERING FEATURES High precision slitting performance Adjustable slitting knives with fine positioning system Robust gearbox-driven slitting head Stable tension control system Compact and modular machine design Bidirectional operation capability OPERATIONAL ADVANTAGES Flexible configurations for different budgets and needs Chodpfx Aqjyzbm Ujvod Compact design for limited factory space Stable and continuous production Easy operation and maintenance Short lead time compared to European manufacturers APPLICATION AREAS Steel service centers Sheet metal processing companies HVAC and construction materials Automotive sub-suppliers General metal processing industries

Year of construction: 2020, condition: like new (used), For sale: Certis Tendo 2000 arm wrapper – year of manufacture 2020 Certis Tendo 2000 pallet wrapper, manufactured by C&C Group in Italy. Suitable for wrapping palletized goods with stretch film. With this arm wrapper, the wrapping arm rotates around the pallet while the load remains on the ground. This makes the system particularly suitable for heavy or less stable pallet loads. Machine data: Brand: Certis / C&C Group Model: Tendo 2000 Year of manufacture: 2020 Csdpfxe Adz H Is Aqvehd Serial number: C1901471M Power supply: 230 V Type: rotating arm wrapper Condition: little used Available documentation: Instruction and maintenance manual Operating manual Parameter list Electrical diagram Parts list arm wrapper, rotating arm wrapper, pallet wrapper, pallet wrapping machine, stretch wrapper, film wrapper, stretch film wrapper, rotary arm pallet wrapper, rotating arm stretch wrapper, pallet wrapping machine, Dreharmwickler, Palettenwickler, Stretchwickler, banderoleuse à bras tournant, filmeuse palette, avvolgipallet, owijarka ramieniowa, used, second-hand, used, gebraucht, occasion, 2020, 230 V rotary arm pallet wrapper, rotating arm stretch wrapper, rotary arm wrapping machine, pallet stretch wrapper, pallet wrapping machine, stretch wrapping machine, stretch film wrapper, semi-automatic pallet wrapper, used pallet wrapper, second hand stretch wrapper arm wrapper, rotating arm wrapper, arm wrapping machine, pallet wrapper, pallet wrapping machine, film wrapper, film wrapping machine, stretch wrapper, stretch film wrapper, stretch film wrapper, pallet sealing machine, pallet packaging machine, semi-automatic pallet wrapper, used pallet wrapper, second-hand arm wrapper

Condition: used, Year of construction: 2021, Overview This Robopac Helix 4 EVO pallet winder was built in 2021, with less than 500 operating hours - technically close to new. The arm carries the pre-stretch carriage around the stationary pallet, so the load itself is never turned - the configuration for unstable, fragile or heavy loads at high output (capacity below). Built as a stand-alone unit. Technical data - Manufacturer: Robopac - Model: Helix 4 EVO - Year of manufacture: 2021 - Machine type: automatic rotating-arm stretch wrapper (pallet winder) - Operating hours: less than 500 h - Capacity: 82 pallets/h (11 wraps, 1,000 mm H), 73 (15 wraps, 1,600 mm H), 64 (19 wraps, 2,000 mm H) - Wrapping cycle time: approx. 36.3 s at H 1,600 mm, 15 wraps (conveyor excluded) - Pallet sizes: 800 x 1,200 mm and 800 x 600 mm; industrial pallets and quarter pallets can be wrapped as well, centred on the conveyor - Load height: 1,000 - 2,000 mm incl. pallet; mechanical max. 2,550 mm incl. pallet and conveyor - Load weight: 100 - 1,200 kg - Conveyor speed: 15 m/min - Machine height: 4,721 mm; hall height from 7,000 mm - Pre-stretch: PGSA carriage, electronically adjustable 100 - 400 % - Stretch film: LDPE / LLDPE, 17 - 23 µm, roll width 500 mm, max. dia. 250 mm, core 76 mm, max. weight 16 kg - Control: Siemens SIMATIC S7-1500 PLC, TP700 7" colour touch panel - Wrapping programs: 15, expandable to 64, 12 control steps per recipe, 4 password-protected access levels - Power supply: 400 V / 50 Hz, TN-S, control voltage 24 VDC - Compressed air: 6 bar, dry and oil-free - Documentation and HMI languages: German / English / Italian Equipment - Rotating arm on a four-column steel structure, geared slewing ring with central lubrication - Patented PGSA pre-stretch carriage with load cell, film tension corrected at the corners, set from the display - Automatic film clamping, cutting and impulse-sealing unit, spring gripper with 300 mm horizontal stroke - Easy Lock tilting roller and roping device for narrowing the film web from below - Pantograph top press unit for load stabilisation during wrapping - Photocell for automatic pallet-height reading - Integrated roller conveyor, pallets loaded and unloaded by forklift - SEW IP55 geared motors for arm rotation and carriage lift, FESTO pneumatic components - Glazed enclosure with Sick M4000 light curtains, 30 mm resolution, 1,800 mm field height - Enlarged illuminated switch cabinet and a separate, independent operator panel - TPM package: centralised lubrication points, gauges with red/green rings, maintenance intervals on the display - Troubleshooting in the HMI with fault location and remedy - R-Connect remote connectivity with cloud portal for production data and teleservice - Documentation printed and on USB: manual, CE declaration, diagrams, spare parts catalogue, layout Condition Used - virtually new, dismantled and professionally packed for transport; photographs show it assembled before dismantling. Sold without warranty. Chodpfx Aqszzz Rdjvsd Availability Immediately. Location: Germany. Handed over dismantled and packed (EXW).

Condition: ready for operation (used), Year of construction: 1987, functionality: fully functional, pressing force: 90 t, bale weight: 700 kg, type of input current: three-phase, total width: 220 mm, total height: 240 mm, overall weight: 23,000 kg, total length: 1,142 mm, filling opening width: 90 mm, filling opening length: 140 mm, bale width: 80 mm, bale length: 1,200 mm, bale height: 110 mm, tank capacity: 1,100 l, year of last overhaul: 2025, Equipment: documentation/manual, Paal Licon 250 SC Channel Baler Originally built for baling non-ferrous scrap, for the last 12 years this machine has been used at a packaging plant. It processed 700–800 tonnes of cardboard per month. Machine specifications: - Length: 11.42 m - Width: 2.20 m - Pressing force: 80 t - Bale/channel dimensions: 110 x 80 cm - Feed opening: 140 x 90 cm - Machine weight: 23 t - Dual high-efficiency cooling system designed for continuous 24-hour operation in a warm workshop environment Chjdpfx Aoxdnn Ijqvod The machine floor has been overhauled; the main ram/cylinder is just six months old. The knives for trimming excess material have been replaced and upgraded for faster and more efficient operation. In 2025, the hydraulic oil was changed, distribution valves serviced, and all rollers of the main plunger/plate replaced. The pressing ram has also been refurbished. Comes with plenty of spare parts. Equipped with upgraded electronics and control panel from 2018, fully operational and ready for immediate use. Operation via touchscreen display. Comprehensive photographic documentation from the dismantling process is available. Complete technical documentation (DTR) in Polish and electrical schematics included. Testing of the machine is possible on-site. Additionally available: - Roller bale discharge system with conveyors, tipper, weighing system, and bale storage (as shown in the photos), Or optionally: - Tipping elevator for emptying 1100 L or 660 L bins - PAAL KES1750 chain channel conveyor: width 1750 mm, horizontal section 8 m, inclined section 8 m.