Used Scrap Winder for sale (761)

Condition: used, mileage: 158,175 km, power: 301 kW (409.25 HP), first registration: 09/2004, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: orange, gearing type: mechanical, emission class: euro3, total width: 2,550 mm, total height: 3,850 mm, Equipment: ABS, air conditioning, ++ BUY ++ BUY ++ BUY ++ BUY ++ BUY ++ Internal number: #667 Wiedemann Super 2000 water recycling unit MAN TGA 26.410 6x2 Superstructure * Wiedemann enviro tec, stainless steel * Water recycling unit, 6.0 / 5.0 / 2000 * Approx. 12,000 liters total volume (air), of which 6,000 liters sludge / 5,000 liters flushing water volume * Unloading: Tipper * CAN control with wireless remote control * Outrigger arm (telescopic) with suction and flushing hose guide High-pressure system Dcedpjzp Dawjfx Ak Aop Uraca KD 716-G REC * 170 bar at 333 l/min * Flushing hose 1: approx. 150 m, reel for approx. 200 m DN 25, mounted on the outrigger * Flushing hose 2: approx. 60 m * Flushing hose 3: approx. 20 m Vacuum system * Wiedemann enviro tec * Approx. 2,000 m³/h at 1,300 rpm * Rotary vane pump * Suction hose approx. 6 m, reel on the tank, dirty water can be pumped out via the suction hose Special features * Equipment cabinet on both sides with two flaps * Soundproofing cladding in front of the pumps, extended upwards on the left and right * Tool box 2x aluminum * Advertising boards L+R integrated into the side paneling * Rotating beacons: cab 2x, superstructure 2x * Work lights: 2 halogen lights at the rear * Trash can / scrap box, vise, hand washing facility available * Air conditioning Technical data * MAN TGA 26.410 * 6x2 * EURO III * 409 hp / 301 kW * Manual transmission * Fuel tank: approx. 300 l * Color: Orange * Tare weight: 16,705 kg * Length x width x height: 9.74 m x 2.55 m x 3.50 m * First registration: 13.09.2004 * Mileage: approx. 158,175 km For further detailed information and/or pictures, please contact us directly. You can find a large selection of other vehicles for SALE or RENT at: Subject to changes, prior sale and errors. The buyer is obliged to independently verify the condition and equipment of the goods. The sale takes place exclusively under our general terms and conditions and with the exclusion of any warranty.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, TEUREMA EHS-110 WIRE DRAWING LINE Year of manufacture: 1999 Maximum speed: 10 m/s Total installed power: 230 kW TEUREMA EHS-110 wire drawing line with robust construction, equipped with a Tecno Impianti drawing bench and prepared for industrial use. The machine has undergone a complete electrical modernization, including a new main electrical panel, Siemens S7-1500 PLC, Siemens 1200 HMI screen, 100% new wiring, and new push-button stations, which significantly improves the reliability, maintenance, and operability of the unit. LINE COMPOSITION Coil stands - 2 tilting winders - Maximum capacity per winder: 3,000 kg Vertical winding tower - 6-meter tower - Lifting and lowering carriage with a hoist Mechanical decaling unit Soaping unit Dcjdozycakopfx Ak Aop - Motor: 1.5 kW - Speed: 1,500 rpm TECNO IMPIANTI DRAWING BENCH - Number of steps: 2 - Two-ring coil: - 1st ring: Ø 610 mm - 2nd ring: Ø 760 mm - 3-speed gearbox: - 3.90 m/s - 7.20 m/s - 10.00 m/s - Power: 160 kW - Frequency: 50 Hz Horizontal coiler - Horizontal drive - Maximum coil capacity: 3,000 kg - 2-speed gearbox: - 7.3 m/s - 10.0 m/s - Maximum coil diameter: Ø 1,200 mm - Core diameter: Ø 600 mm - Usable width: 900 mm - Power: 45 kW TECHNICAL DATA - Inlet diameter: 5.5 to 14 mm - Outlet diameter: 4 to 12 mm - Number of blocks: 1 vertical - Maximum line speed: 10 m/s - 2 CL30 A 33 Eurolls cassettes - Rollers: Ø 150 x Ø 90 x 15/20 mm - Total machine power: 230 kW - Frequency: 50/60 Hz ELECTRICAL AND AUTOMATION UPGRADE - Completely new main electrical panel - Siemens S7-1500 PLC - Siemens HMI 1200 screen - 100% new wiring - New push-button stations - New programming AVAILABLE SERVICES Possibility of supply with: - installation - assembly - commissioning - technical assistance - adaptation according to customer needs

Condition: ready for operation (used), Year of construction: 2013, operating hours: 20,580 h, punching force: 41 t, sheet thickness (max.): 2 mm, CNC punching machine manufactured in 2013. This Pivatic Punching Line PCC80-e TT HT is designed for serial production of flat sheet metal parts, featuring a punching force of 400 kN and a maximum coil weight of 5,000 kg. The line includes two punching sections for flexible and repetitive operations. If you are looking to get high-quality punching capabilities, consider the Pivatic Punching Line PCC80-e TT HT machine we have for sale. Contact us for further details. • Application: Serial production of flat sheet metal parts (panels, brackets, enclosures, electrical cabinet parts, etc.) requiring holes, cut-outs, and notches • Process flow: Coil → uncoiling → straightening → positioning → TT punching → HT punching → part cutting → discharge/stacking • Technical specifications: • Sheet width: 60–830 mm • Sheet thickness: 0.5–2.0 mm (version available for up to 4.0 mm) • Maximum coil weight: 5,000 kg • Installed power: 20 kW • Power supply: 3 x 400 V + PE • Frequency: 50 Hz • Punching system: • TT (Thick Turret): CNC punching with standard cassette-type tools for flexible holes/cut-outs/contours • HT (Hard Tool): Second punching section using dedicated tooling for repetitive operations • Space requirements: • Main line footprint: 17.5 x 5.5 m • Additional space for scrap: 1.5 m • Additional space for HT section: 1.55 m • Machine condition: Fully operational and in production; inspection and trial possible Additional equipment • Included: • Coil positioning carts • Coil uncoiler • Sheet straightener • Control panel for uncoiling/straightening unit and coil carts • Main control panel • Tilting conveyor for selectable product discharge • Transport and stacking module • Safety system with fixed guards and photoelectric barriers • Control cabinet with hydraulic power unit • Tool cassette carts Dsdpfezynlxex Ak Ajcp • Hard Tool transport and storage station • Not included: • Punching tools • Tool cassettes • Robot shown in some photos

Condition: good (used), For sale: Professional automatic cutting line for EPS (Expanded Polystyrene) blocks. Features & Specification: -Block storage / feeding magazine -Block tilter / inverter -Scrap / waste grinding system (bottom and side) Dcodpfx Aszyyfksk Ajp -Horizontal cutting section -Contour / profile cutting section -Cross-cutter section Control System & Condition: The main electrical and control cabinet has been thoroughly modernized, with most components being -practically new. Controlled by a Siemens Simatic S7-1200 PLC. Maximum Block Dimensions: -Length: 410 cm -Width: 105 cm -Height: 130 cm Line Dimensions: -Cutting line length: 20 m -Block storage length: 6 m -Total straight-line length: 26 m

Condition: used, TECHNICAL DETAILS - Bar diameter : 45 [mm] - Bar length : 3800 [mm] - Max. scrap length : 150 [mm] Dcjdpfx Akezbnb Rj Asp - Loading time : 22 [sec] POWER SUPPLY - Supply voltage : 400 [V]

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: D32U/8477, Offer Number: D32U/8477 Machinetype: spring coiling machine Make: WAFIOS Type: FSE 23 Constr. year: 2001 Dsdjzd U H Ropfx Ak Aecp wire diameter: 0,35-1,6 mm spring diameter: 35 mm output pieces/min: 500 Location: Outside of Europe

Condition: used, Year of construction: 2000, functionality: fully functional, machine/vehicle number: D32U/8478, Offer Number: D32U/8478 Machinetype: spring coiling machine Dodpfx Aozd U Ihek Aocp Make: WAFIOS Type: FTU 5.3 Constr. year: 2000 wire diameter: 0,8-5 mm spring diameter: 50 mm feeding length: ∞ output pieces/min: 50 Location: Outside of Europe

Condition: used, power: 104 kW (141.40 HP), fuel type: diesel, color: yellow, first registration: 07/2017, Year of construction: 2017, operating hours: 18,886 h, Model year: 2017 Number of cylinders: 4 Engine displacement: 6,930 cc Unladen weight: 13,500 kg Payload: 3,500 kg GVWR: 17,000 kg Dimensions (L x W x H): 753 x 250 x 325 cm CE marking: yes # OFFER ## Liebherr L 538 wheel loader with high-dump bucket Manufacturer: Liebherr Type: L 538 Year of manufacture: 2017 Operating hours: 18,886 original hours Color: Original Liebherr factory paint Condition: Normal, well-maintained used condition ### General description We offer you this Liebherr L 538 wheel loader from the year 2017. The machine has 18,886 original operating hours and is in a normal, well-maintained used condition. Thanks to the proven Liebherr quality, this machine is ideally suited for daily professional use. The wheel loader is equipped with an original high-dump bucket and is ideal for loading walking floor trailers, containers, and high trucks. In addition, the machine has solid rubber tires, which minimizes downtime due to tire damage. This makes it particularly suitable for recycling plants, scrap yards, transshipment companies, and industrial applications. ### Engine * Manufacturer: Liebherr * Engine type: Liebherr D934 A7 * 4-cylinder turbocharged diesel engine * Displacement: approx. 5,030 cm³ * Power: 104 kW (141 hp) * Emission standard: Stage IV / Tier 4 Final * Water-cooled * Fuel-efficient * High torque at low speeds ### Drive * Liebherr hydrostatic drive * Permanent all-wheel drive * Automatic transmission * High tractive force * Precise and comfortable operation ### Equipment * Original high-dump bucket * Solid rubber tires * Comfort cab * Air conditioning * Heater * Air-suspended driver's seat * Joystick control * Work lights * Reversing alarm * CE version ### Technical data * Operating weight: approx. 13,500 kg * Engine power: 104 kW (141 hp) * Bucket capacity, high-dump bucket: approx. 3.0 m³ * Tipping load, straight: approx. 9,500 kg * Maximum speed: 40 km/h ### Transport dimensions * Overall length: approx. 7.55 m * Overall width: 2.55 m * Overall height: approx. 3.30 m * Wheelbase: 3.00 m * Transport weight: approx. 13,500 kg ### Areas of application This machine is ideally suited for: * Recycling plants * Scrap and metal recycling * Waste management * Transshipment companies * Wood industry * Biomass * Composting plants * Industrial companies * Loading of walking floor trailers and containers ### Summary * Year of manufacture 2017 * 18,886 original operating hours * Original Liebherr factory paint * High-dump bucket * Solid rubber tires Dodezk Eldspfx Ak Ajcp * Fuel-efficient Liebherr engine * Hydrostatic drive * Well-maintained used condition * Ready for immediate use This Liebherr L 538 is a reliable and economical wheel loader solution for professional use in recycling, transshipment, and industrial operations. The combination of a high-dump bucket, solid rubber tires, and robust Liebherr technology makes this machine a...

Condition: used, Year of construction: 2007, - Working area: X = 4600 mm / Y = 1935 mm / Z = 275 mm - CE safety devices - 8 ATS plate holders - L = 1525 mm - 24 sliding rails - Automatic positioning of 8 plate holders and sliding rails (EPS X-Y) - Conveyor belt for removing chips and scrap - Pneumatic locking system, divided into 2 working areas in X - 8 rear reference stops with a stroke of 115 mm - 8 stops with a stroke of 140 mm, positioned at 1175 mm (L = 1280 - 1525 - 1800 mm) - 8 stops with a stroke of 140 mm, positioned at 770 mm (L = 1280, 1525, 1800 mm) - 4 lateral stops with a stroke of 140 mm (2 left + 2 right), including pneumatic system. Dsdpozux Nwjfx Ak Ajcp - 4 removable center stops with a stroke of 140 mm (2 left + 2 right), including pneumatic system. - Sensor for detecting lowered stops. - Pneumatic system for lifting rod holders. - 6 lifting rod holders for easy loading - H = 74 mm modules. - Vacuum system for a 250 m3/h pump - 250 m3/h rotary vane vacuum pump for standard vacuum system Composition C3-A1 - Device for mounting a chip deflector with a pneumatic or inductive sensor on a 5-axis machining unit. - Flange for mounting aggregates on a work unit with 5 interpolating axes. *Aggregates can only be used if the spindle is in the vertical position. Composition C3-P2 - Additional Z-slide for rear work units, controlled by an independent Z-axis - 16 vertical and 4 horizontal drilling spindles in the Y direction - Chain-type tool changer with 22 positions at 180 mm center distance - Iron gripper for chip deflectors with pneumatic or inductive sensor, positioned in the chain-type tool changer - RH chip deflector with inductive sensor for standard spindle or 15 kW 5-axis spindle * requires the device for the chip deflector * requires the flange for mounting aggregates when using a 5-axis spindle * requires the C-axis when using a standard spindle - Liquid cooling unit for liquid-cooled systems, can cool two spindles or one spindle and a liquid-cooled drilling head. - Automatic lubrication system - Control unit with 5 interpolating axes. This unit enables numerically controlled interpolation of the spindle on 5 axes. The spindle has high power while simultaneously having reduced dimensions. Note: - Additional overhauled 5-axis main spindle - 8 horizontal drilling spindles, 12 vertical drilling spindles, and nut saw are out of order.

Year of construction: 2026, condition: new, The Mini Film Waste Pelletizing Line is designed for recycling low-bulk-density polymer waste at relatively low production capacities. It is a compact solution for processing film production waste and other lightweight plastic materials into reusable pellets. The system can process plastic film in either shredded or non-shredded form, depending on the type and condition of the material. 1. Output Range: 70~90Kg/hour 2. Standard Electricity:380V/3 Phases/50 Hz 3. Main Motor Power: 18.5 кW 4. Total Power: 29 кW 5. Screw Dia. : 90mm 6. Filter: Dual stations manual filter 7. Cooling Method: air cooled Dcedpfsz Alnpjx Ak Asp 8. Material feeder pusher: equiped 9. Application: LDPE, HDPE, LLDPE pelletizing, scraps or rolls

Year of construction: 2003, condition: good (used), • Fully automatic • For packaging rod-shaped products • Product height (mm): 19 - 600 • Product width (mm): 600 - 2100 • Product length (mm): 2400 - 5700 • Product weight (kg): 3000 • Maximum cross-section diagonal (mm): 2184 • Braking motor for wrapping ring drive: controlled via a frequency inverter Dcodpfx Akshyxfvo Aop • 2 powered conveyor belts: each 3000 mm long, for the infeed side of the machine, equipped with a braking motor • 2 powered conveyor belts: for the outfeed side of the machine (1 piece 3000 mm long, 1 piece 4400 mm long), equipped with a braking motor • 1 wrapping material holder: for stretch film, crepe paper, PE film, etc. • Maximum wrapping material roll width (mm): 500 • Automatic gripping, cutting, and positioning device: for PE stretch film, designed for smooth cutting • Electrical device for applying edge protection strips at the beginning and end of the product to be packaged: pre-selectable via a timer • Electrical power pre-stretch system: for PE stretch film with a thickness of 17 - 50 my • Machine length (mm): approx. 2000 • Machine width (mm): approx. 3400 / 3800 • Machine height (mm): approx. 2200 above floor level

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, cutting force: 500 t, power: 110 kW (149.56 HP), total width: 3,500 mm, total length: 14,000 mm, total height: 4,000 mm, overall weight: 58,000 kg, cutting length (max.): 1,200 mm, year of last overhaul: 2020, Hydraulic scrap shear Taurus SM540 Cutting force: 500 t Drive: 2x 55 kW Machine ex location South-Germany Dismantling and loading: On request by personnel IUT Beyeler AG Year of construction: 1998 Availability: end of february 2024December 2023 Machine can be visited in operation near DE - 66111 Saarbrücken Price including dismantlin and loading on trucks Dcsdpfx Ajmx Twrsk Asp ( all expenses at our side )

Condition: new, functionality: fully functional, total width: 2,400 mm, total length: 110,000 mm, total height: 2,850 mm, rotational speed (max.): 2,100 rpm, overall weight: 20,000 kg, power: 209.62 kW (285.00 HP), transport length: 10,500 mm, transport width: 240 mm, transport height: 395 mm, Equipment: rotational speed infinitely variable, WERT PHANTOM mobile shredder on crawler chassis for various applications - wood - waste - tires - glass - paper - Building rubble - Light scrap Tooling according to customer requirements Equipment: Dcsdpetty Hhofx Ak Aep Power: 205 KW - 285 HP Caterpillar C7.1. stage 5 Transmission: 2x 125,000 NM Optionally synchronous or asynchronous shaft rotation Hydraulics: Linde Belt width: 1000mm Discharge height: 3300 mm Magnet: Optional Spiral fan: standard Radio : standard Water spraying: standard Weight: 20 tons Dimensions L/W/H : 11x2,4x2,85m

Year of construction: 2024, operating hours: 10 h, condition: like new (used), functionality: fully functional, Extrusion Line with Densifier – Ideal for Recycling Applications This robust and versatile extrusion line is perfectly suited for recycling polyolefins such as LDPE, HDPE, and PP. Thanks to the integrated densifier, even materials with low bulk density – such as regrind, EPS, film scraps, and other lightweight plastic waste – can be processed efficiently. Dcedpfx Ajtziudjk Aep The densifier compacts the loose material and feeds it directly into the extruder, ensuring a consistent material flow and stable extrusion process even with challenging input materials. Key Features: • Suitable for all types of polyolefins • Ideal for lightweight, bulky materials like EPS or film regrind • Efficient feeding system via integrated densifier • Compact design and easy maintenance This line is an excellent choice for recyclers, plastic processors, and compounders who require flexibility and reliable performance when working with diverse input materials.

Year of construction: 2019, condition: excellent (used), Web width: 500 mm Speed: max 150 m/min Main unwinding - Unwinding with bearings on both sides - Pneumatic roller lift - Servo drive Vacuum cutting table Dedeu Iucujpfx Ak Aocp BST web edge control Vacuum station (2x) - Servo drive - Adjustable web width Die cutting station - Servo drive - Pneumatically operated PowerBridge - Easy tool change thanks to Moving bridge - Register mark control Rewinder/unwinder - Separate servo drive for winder and auxiliary shaft - Direction of rotation on both sides - Pneumatic clamping - Automatic diameter calculation Tube Scan - web monitoring Web buffer unit ( static) Tandem rewinder - Separate servo drive in each case - Friction shafts - Cutting table for web fixing - Separate display S-CONtrol - Convenient and intuitive to operate - User and recipe management - Display on rail system

Condition: ready for operation (used), With rotary arm and control cabinet. Djdpfx Akoh D H Hvj Aocp

Year of construction: 1999, condition: ready for operation (used), A Sahm parallel winder is available. Spindle positions/winding positions: 104, traverse length: approx. 300mm, bobbin core holder: approx. 50mm. On-site inspection is possible. Dedswhp Nqepfx Ak Ascp

Condition: used, The machine is a wrapping machine for paper reams, operating principle: electromechanical-pneumatic, max. mechanical speed: 16cycles/min, average format changeover time: approx. 1min, max. roll diameter: 1000mm, core diameter: 150mm, roll width: 600-1600mm, wrapping paper: kraft and poly, wrapping paper grammage: 80-150g/m², roll change time: approx. 3min, processable formats width: 297-1000mm, length: 420-1400mm, max. height: 80mm, min. height with head folding: 25mm, min. height with top folding: 15mm, ream weight: 4-40kg, minimum grammage of paper reams: 60g/m², control: electronic logic control PLC S7/400, connected load: 160kVA, permissible voltage variation: +8%/-5%, control cabinet socket: 220VAC, control cabinet lighting: 220VAC, PLC I/O card inputs and outputs: 24VDC, solenoid valve outputs: 24VDC, supply air pressure: 5bar, air consumption: 700Nl/min, noise level: 80dB(A), with documentation, an on-site inspection is possible, not connected to power, the machine has already been dismantled. Dcjdpfx Akozybv Re Aep

Year of construction: 1985, condition: ready for operation (used), 2 SAHM precision cross winders type 260 are offered. Year of manufacture 1985 and 1998. Each machine has 2x 96 positions 192 positions total, plus 10 additional reserve heads, total 202 positions. Traverse stroke: 13inch approx. 330mm. Mandrel diameter for sleeves: 3 1/4inch approx. 82.5mm. Inspection by appointment possible. The machines are not located in Europe. Dedpfoyk Hclex Ak Ascp

Condition: ready for operation (used), Year of construction: 2007, sheet width 3050 mm plate thickness 6.35 mm thickness at "Niro-steel" 4.00 mm 8.00 mm down holder 10 Stück cutting angle 0°40 - 2°20 Grad 3340 mm work height max. 860 mm 575 mm Control GP 37W2 13 - 33 Number of working hours ca. 15.800 h 0 max. 315 bar oil volume 100 ltr. total power requirement 6.0 kW weight of the machine ca. 6030 + 1850 kg In good condition (!!) current new price including accessories approx. 110.000 Euro Special price upon request - in checked conditions - machinevideo - ?v=3JUqSaaJkFQ Equipment: - Robust CNC electro-hydraulic guillotine shear - AMADA CNC touch control, front left ("GP 37W2") * Machine control including information display * Main display with 4 control panels * Control/operation of all functions * Max. 50 cutting programs with 15 sequences each - CNC electro-motorized backgauge * Travel speed 100 mm/sec. - CNC electro-hydraulic cutting angle adjustment - CNC electro-hydraulic cutting gap adjustment - Sighting device & cutting line illumination for viewing the scribe line * ??Shear cutting according to the optical scribe line - Manually adjustable table support plates, including ball transfer units * Grip recesses in the front support table Dcsdpfxsxaaghe Ak Aop - 2x freely movable foot switches - Operating instructions + circuit diagram SPECIAL ACCESSORIES included: - Backgauge system with 3 stations + separate control: * STATION 1 - AMADA conveyor belt with pneumatic sheet support device * STATION 2 - AMADA conveyor belt with pneumatic scrap deflector * STATION 3 - AMADA stacking device with scissor lift table device - Wooden box with spare knives - 1x AMADA extra-long side stop, with support foot * Length approx. 3.000 mm - 2x AMADA extra-long front support arms

Condition: ready for operation (used), Year of construction: 1991, A WT Wickeltechnik slitter rewinder is offered. Maximum web width: 1100mm, minimum slit width: 70mm, aluminum foil thickness range: 20µm-120µm, laminate thickness range: 20µm-300µm, maximum speed: 600m/min, maximum unwind roll diameter: 1300mm, maximum rewind roll diameter: 1000mm, maximum web tension: 1000N. An on-site inspection is possible. Dsdpfx Akozrhhkj Aocp

Year of construction: 2022, condition: ready for operation (used), A fully automatic horizontal tunnel stretch wrapper Bang & Co for securing products on corrugated cardboard blanks is available. Turntable speed: 100rpm, max. conveyor speed: 18m/min, carton width range: 70mm-650mm, min. product length: 200mm, max. spool diameter: 140mm, max. spool height: 125mm, film roll inner diameter: 38mm, film thickness range: 18µm-40µm. Machine dimensions X/Y/Z: approx. 1600mm/1250mm/1650mm, weight: approx. 500kg, operating hours: approx. 6851h. Dokumentation vorhanden. An on-site inspection is possible. Dcodpfx Akjxwyvqs Aop

Condition: used, functionality: fully functional, power: 95 kW (129.16 HP), gearing type: hydrostat, fuel type: diesel, color: blue, overall weight: 22,900 kg, operation weight: 19,100 kg, axle configuration: 4x4, number of seats: 1, Year of construction: 2016, operating hours: 12,667 h, Equipment: all wheel drive, cabin, head guard, hydraulics, Wheeled material handler Terex Fuchs MHL 320 (F-series), used for scrap handling. Technical data (per nameplate and display): – Year of manufacture: 2016 – Operating hours: 12,667 h – Engine power: 95 kW – Operating weight: 19,100–22,900 kg Equipment: – Wheeled undercarriage with outriggers and dozer blade – Solid rubber tyres (worn, see photos) – Cab protection guard Djdpfjz I Ivwjx Ak Ajcp Deutz TCD 3.6 engine, reach up to 10.4 m, hydraulically elevating cab. Inspection and test run by appointment on site (Ligmet, Czech Republic). Loading onto truck on site. Sold as is, price net plus VAT.

Condition: used, 🔴 VKRAN hydraulic crane on a container – €13,000 For sale: VKRAN articulated hydraulic crane, mounted on a reinforced steel container, designed for heavy-duty professional use. This equipment is particularly suitable for recycling, waste management, wood handling, scrap metal processing, and industrial material handling. 🔧 Specifications: • Type: Articulated hydraulic crane • Model: VKRAN • Hydraulic rotation • Robust articulated arm • Elevated control station • Mounted on a steel container • Designed for harsh environments 🛠 Condition: • Used equipment • Good overall condition • Sound structure • Cylinders and hoses in place • Normal wear and tear due to professional use 🚛 Applications: • Loading/unloading of containers • Recycling • Green waste • Wood/scrap metal • Material handling on industrial platforms 📸 Actual photos available 📍 Available for viewing on-site Dsdjx I Rzzspfx Ak Aocp 💰 Price: €13,000

Year of construction: 1995, condition: used, COMI SL2000 x 900 x 550mm Thermoforming Machine. S/No. 646 (1995) TECHNICAL DATA OF THE EQUIPMENT Max. frame inner size mm 2005 x 905 Scrap cutter motor power kW 3 Max. tool base size mm 2000 x 900 Scrap conveyor motor power kW 0.37 Min. tool base size mm 700 x 500 Finished workpiece discharge belt motor power kW 0.75 Max. sheet size mm 2090 x 960 Cross-cutting motor power kW 0.25 Min. sheet size mm 790 x 560 Cross-cut scrap conveyor motor power kW 0.22 Djdpsz I Sbdjfx Ak Ajcp Max. tool height mm 800 (550+250) Transfer unit motor power kW 1.5 Maximum formed workpiece height mm 550 Auxiliary units max. consumption kW 5.10 Max. sheet stack height mm 1000 Max. installed power kW 375 Max. pallet height mm 180 Tempering unit power kW 52 Upper heating power kW 83.3 Power consumption at 70% load kW 262.5 Lower heating power kW 71.3 Vacuum pumps capacity m3/h 750 (250x3) Upper preheating power kW 52 Tool vacuum tank capacity L 2000 Lower preheating power kW 46.8 Bell vacuum tank capacity L 2000 Oil pump motor power kW 19 (15+4) Required oil quantity L 600 Vacuum pump motor power kW 23.4 (7.8x3) Required air pressure kPa 600 Sheet centering motors power kW 0.24 (0.12+0.12) Incoming water pressure kPa 200-300 Sheet feed motor power kW 2.2 Max. hydraulic operating pressure MPa 18 Sheet feed width-adjustment motor power kW 2.2 Hydraulic operating pressure MPa 10 Sheet picker motor power kW 0.37 Incoming water temperature °C 12-20 Location: These lots are located in Susegana, Treviso, Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.