Used Scrap Winder for sale (731)

Year of construction: 1994, condition: used, Profile scraper unit, profile scraper, flat scraper unit, finishing unit, modular unit, format processing unit, double-end tenoner, edge processing machine, scraper for edge processing machine -Manufacturer: OTT, profile scraper from edge banding machine type U206 -Quantity: 1 piece available Dksdpsu Drugsfx Afxjt -Dimensions: 460/430/H560 mm -Weight: 57 kg

Year of construction: 1999, condition: excellent (used), working width: 620 mm, machine/vehicle number: SE 01510 A10, Heating Element Welding Machine HP60/40 by BRANSON The drive is hydraulic, supported by positioning and control systems. The machine is equipped with its own vacuum pump. Only a few operating hours (approx. 6,800 hours). Usable heating element area: width 600 mm x depth 400 mm Max. workpiece dimensions: - Max. width: 620 mm - Max. depth: 420 mm - Max. upper height: 350 mm - Max. lower height: 350 mm (Combinations of part heights possible, depending on contour) - Max. processing temperature for contact method: 400°C The modular frame design allows for easy conversion and retrofitting. The side doors and the front door in the welding area can be easily opened (for rapid retooling). The automatic safety lift door ensures a high level of operator safety. The temperature control units on the operator panel have actual/target displays. The control device is a Siemens PLC HMI. The machine is controlled by a Siemens PLC (S7-300 controller). Heating elements are equipped with temperature sensors for temperature regulation and serve as safety cut-offs in case of overheating. The pin systems in the tool mounting surfaces ensure reproducible positioning. Advantages of heating element welding technology: - Reliable welding of workpieces with low or varying wall thicknesses. - Low scrap rate due to dimensionally accurate and repeatable welds. - Precise time, temperature, and force control enable welding of sensitive parts. - Virtually all thermoplastics can be welded with this process. - Different thermoplastic types can be joined (compatibility needs to be verified). Technical data of the machine: - Power supply: 3 x 400 V AC + N + PE - Power: 25 kVA - Rated current: 20 A - Required cable cross-section: 5 cables, each 6 mm² - Required pneumatic connection: 6 bar Machine dimensions: - Machine width: approx. 1.22 m Dkjdpfx Asykvdljfxot - Machine width with operator panel: approx. 1.8 m - Machine depth: approx. 2.1 m - Machine depth with operator panel: approx. 2.6 m - Machine height: approx. 2.4 m - Machine height with raised safety door: approx. 2.85 m (open door) Machine weight: approx. 2.2 t

Condition: excellent (used), Year of construction: 2023, operating hours: 67 h, functionality: fully functional, machine/vehicle number: 1591 / 1592, saw blade diameter: 500 mm, Fully Automatic Sawing and Punching Machine for Aluminum and Plastic Profiles The Profilma 502 ST - HV combines precise sawing and flexible punching in a fully automatic process. Based on the Profilma 502 model, it is specifically optimized for high-volume applications and combined processing operations – including the handling of entire profile layers. Control is provided via a Siemens S7 system with touch display, piece counter, cycle time display, and integrated fault diagnosis. An IXON router allows for secure remote access via VPN. Up to 10 punching dimensions can be programmed per order. The horizontal punching unit can be deactivated if required. Sawing Area & Feed: - 500–550 mm saw blades - Saw drive: 7.5 kW, S6, 400 V, 50 Hz, 2,850 rpm - Infinitely variable speed control - Saw cuts from below, with motorized feed - Material feed: 3–800 mm, reversible up to 4,000 mm - Ball screw spindle with servo drive and round guide shafts - Remnant length: from 75 mm (saw mode), from 80 mm (punch/saw mode)* Punching Unit: - Vertical and horizontal hydraulic punching (on discharge side) with automatic oil cooler - Punching force: 2 × 150 kN - Stroke: ≤ 20 mm - Vertical stroke infinitely adjustable (also suitable for embossing) - Horizontal punching cylinder can be switched off separately - Double stroke cycle time: 2x 2–3 seconds - Punch scrap is discharged sideways from the machine frame - 250 × 800 mm conveyor belt for part discharge Equipment: - 2 pneumatic clamping cylinders (vertical, pressure-reduced) - 3 chip extraction nozzles Ø 100 mm, volt-free contact for extraction control - Minimum quantity lubrication unit with 2x 3-liter tanks and level indicator - Noise protection package: sound-insulated hood and internal saw blade guard - Roller conveyor (740 mm) with reach protection on infeed side - Sturdy stationary frame, working height: 960 mm - Manually opening safety hood - Saw blade housing located under the table Max. Cutting Area: - Profile height: up to 65 mm - Profile width: up to 135 mm Technical Data: - Dimensions (W × D × H): approx. 311 × 153 × 197 cm - Total of 2 units available ----- Attractive Offer – Flexible & Worry-Free We not only offer you a high-quality product but also tailored financing options that suit your needs. Whether down payment, installment plans, or individual financing models – together we will find the right solution. If desired, we can also handle the complete transport organization. From planning to reliable delivery, we ensure a smooth and timely process so you don’t have to worry about a thing. 📞 Contact us for more information or a non-binding quote. Dodpfsyyzxhsx Afxjkt We provide you with personal and competent advice. Subject to prior sale, changes, and errors!

Year of construction: 2025, condition: as good as new (ex-display), functionality: fully functional, LEONARDO has all the properties of the small, yellow LEO stretch robot, such as the small working area of 750 mm around a pallet, compact design and motorized drive. In addition, it offers an electronically adjustable film brake, up to 100% motorized film stretching and the patented push mast, which allows it a winding height of 2,350 mm - with a total height of only 1,560 mm when not in use. • Compact design: only 75 cm space required • For pallets up to a maximum height of 2350 mm • Patented extension mast, from 1560 mm (at rest) to a maximum height of 2,350 mm • Electronically adjustable film brake, a motorized up to 100% • Electric maneuver (patent) that reduces the work area compared to other robots • 6 freely programmable programs (program memory) • Wide caliper strap • Electrically controlled steering • Maintenance-free battery (2 x 12 volts) • Charger: 220 volts integrated Dedpsih Sriefx Afxekt Pallet dimension: Length: min. 600 mm / max. without limit Width: min. 600 mm / max. without limit Height: min. 500mm / max. 2350mm Foil thickness of 8-30 my Pallet weight: min. 50 kg machine size: Height: 1,560 mm (resting state) Length: 1066mm Width: 738 mm Weight: 195 kg Battery for electric drive 24 V Built-in quick battery charger 230 V Warranty: 12 months (single-shift operation),

Condition: excellent (used), Year of construction: 2006, Used high-performance roll garbage bag manufacturing machine for sale. Includes: Roll lifter, longitudinal welder, folding unit, bottom welder, and labelling unit. The machine is in perfect operational condition and can be viewed in production. For sale with factory support and spare parts due to underutilization. Technical Specifications: - Welding width: 700 mm - Maximum bag length: 2000 mm - Minimum bag length: 380 mm - Film speed: 120 m/min - Drive: Servo - Number of tracks: 2 Additional Specifications: - Heavy-duty, automatic 2-track roll garbage bag manufacturing machine - Film thickness: - LD/LLDPE: 0.012–0.060 mm (single layer) - HDPE: 0.008–0.015 mm (single layer) - Bag width: 300–700 mm - Line speed: 100–165 m/min (depending on material, thickness, and film quality) - Finished roll size: roll width 200–300 mm; roll diameter up to 130 mm Single-line labelling unit: - Label width: 70–200 mm (1 line) - Label length: 180–350 mm - Label roll diameter: max. 250 mm Djdpfx Afjykz Ebsxskt Year of manufacture: April 2006 Components: 1. TAI-1300C Lifting unwinder 2. SSB-1300A Slitting knife and longitudinal welding unit 3. TA-800C1 Bag making & welding machine 4. TAF-400-2N-M 2-lane folding machine 5. TAD-700 Four-axis spindle winder Other information: - Warranty: No warranty - Current status: In production - Availability: Immediate - Power requirement: 20 kW - Price: EUR 50,000

Condition: used, Year of construction: 1965, functionality: fully functional, machine/vehicle number: D32I/7989, Offer Number: D32I/7989 Machinetype: spring coiling machine Make: WAFIOS Type: FM50 Constr. year: 1965 wire diameter: 1-5 mm feeding length: 2400 mm Dedpfewi Sx Djx Afxokt output pieces/min: 150 output - pieces/min: Location: Germany

Condition: used, Year of construction: 2008, functionality: fully functional, 1 x used 72/80-page web offset printing press Manufacturer: manroland Model: Lithoman IV Year of construction: 2008 Web width: 2060mm Section length: 620mm Cylinder circumference: 1240mm Max. speed: 42,500 cph Running direction: left-to-right Description: 1 x web winder MEGTEC DLC 3200 with web feed AUROLOAD 4 x printing units manroland with PPL and Baldwin Impact Fusion blanket washing system 1 x dampening system technotrans delta.d 400W Dedpfx Ajzvyxcefxskt 1 x hot air dryer Contiweb Ecoset/T 15.3m with integrated afterburner (retrofitted in 2020) 1 x ink density control system GMI ColorQuick 1 x cut register control manroland CutCon 1 x color register control manroland 1 x superstructure with 5 lay units 1 x 2nd feeder (baby feeder) 1 x folding unit PFI 5S, 2:5:5 with positive feeder and magnetic brake (MT folding) 1 x saddle stitcher Tolerans 1 x cooling unit Axima i-Cool 1 x control system PECOM-X optional: 1 x disposal line RIMA System with cutting modules RS840, cross-lay unit RS36S and RS400 robot/palletizing system

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2002, Equipment: crane, Lecitrailer URS Ampirol Trailer with JONSERED 1020 Crane For sale: Professional Ampirol / Hooklift trailer set equipped with a hydraulic crane, suitable for recycling, scrap, timber, waste, and heavy-duty handling operations. Trailer specifications • Manufacturer: Lecitrailer • Model: URS • Year: 2002 • Type: Ampirol trailer • Axles: Tandem • Axle load: 9,000 kg • GVW: approx. 18,000 kg • Braking system: mechanical with ALB load-sensing valve • Container compatibility: up to approx. 30 m³ Dodpfx Afox Iuy Isxokt Crane specifications • Brand: JONSERED • Model: 1020 • Rotation: 360° • Maximum outreach: approx. 9 to 10 m • Equipment: hydraulic grapple • Applications: scrap, timber, waste, recycling Condition • Robust and professional set • Fully equipped • Sold as-is 📍 Location: France 🚛 Loading and transport: at buyer’s expense 💰 Asking price: €30,000

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25Lybra02, LYBRA EASY / 3 programs TECHNICAL DETAILS Diameter Ø 1,700 mm Height 2200mm Max. pallet dimensions: 1,200 x 1,200 mm Rotation arm using high resistance ball bearings Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Dkodsykudkepfx Afxet Emergency stop switch according to CE regulations A positioning aid for correctly placing the pallet is included in the scope of delivery Safety bumper for collision protection Push button for switching on the machine and start & stop function according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F62 - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 3 storable wrapping programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application Soft start cycle to reduce film tears on sharp pallet edges FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE via manually adjustable brake roller on the foil carriage Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2KW / 6A Optionally available: FILM CARRIAGE TYPE “FE” WITH ELECTROMAGNETIC BRAKE via electromagnetically braked roller Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2 kW / 6A - 1.75 kW / 8.5 A (with PRS / PS) Optionally available with a manual line formation. Other systems available immediately from the Ludwigsburg warehouse.

Year of construction: 2026, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25Synthesi01, Stretch Winder Synthesi TECHNICAL DETAILS Turntable / base frame / Ø 2,200 mm Max. pallet dimensions: 1,550 x 1,550 mm Max. load capacity: 2,000 kg Wrapping height (pallet included) 2,200 mm FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Foil application tension electronically adjustable in the programs in different steps Height of turntable 75 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change Dkjdpfx Afjykub Aexot F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button Optionally possible: Turntable size up to Ø2600 mm Mast height up to 3900mm ramp mounting frame Light scanner for black products cutting device Etc. Other systems available from the Ludwigsburg warehouse. Some images may contain options that are subject to a surcharge. Illustration similar

Year of construction: 2001, condition: good (used), Incl. cutter, binding unit, ejection device ø 20-75 mm Djdpswvh U Uofx Afxekt

Year of construction: 2011, operating hours: 2,600 h, condition: used, functionality: fully functional, Cable granulator for processing cable scrap Shredder + WS15 granulator + belts Technical data Throughput depends on material and screen, max. 500 kg/h Operating hours approx. 2600 h Total weight 5.7 t Height 2.75 m Width 7.9 m Depth 10.1 m Power consumption 58 kW at full load Power consumption 42 kW at idle Connection 400 V/550 Hz (fuse rating 125 A + 80 A slow-blow) The system is assembled (demo unit) and can be inspected and demonstrated on site. System overview 1x ICS CONTECT Pre-shredder Carrera-6D.LN WS15 1x ICS CONTECT Radial fan MGTN7 Dkodpfeza Ahcjx Afxst 1x ICS CONTECT Shredder 40/60 VGA 1x ICS CONTECT Separation table DK 20.II 1x ICS CONTECT Mobile extraction system U-3000 1x ICS CONTECT Conveyor belt bg GBF 1x Föratec Lifting and tilting device (not installed) 1x Ventilation system with various ducts (not installed) - Spare blades for shredder available

Condition: excellent (used), Semi-automatic pallet wrapper Inv. no. 3587 Manufacturer: de Wit Model: WP 2 Year of manufacture: 2008 * Turntable positioning by fixed stop * Adjustable number of bottom and top wraps * Turntable diameter: 1650 mm * Max. wrapping height approx. 2400 mm * Suitable for Euro pallets and block pallets!!! * Own weight approx. 500 kg Djdpfoya Iuujx Afxekt

Condition: excellent (used), Semi-automatic pallet wrapper Inv. no. 3589 Manufacturer: de Wit Type: WP 2 Year of manufacture: 2007 * Turntable positioning via fixed stop * Adjustable number of bottom and top wraps * Turntable diameter: 1650 mm * Max. wrapping height approx. 2400 mm * Net weight approx. 500 kg * Suitable for Euro pallets and block pallets!!! Dkodpfsya Iu Isx Afxet * Inclusive ramp!!!

Condition: ready for operation (used), functionality: fully functional, Equipment: documentation/manual, E-scrap processing plant with hammer mill, magnet, and re-separation system Feed conveyor Erdwich HA800 hammer mill Soundproof enclosure Knock-off belt THM Overband magnet ERIES Dksdpoztp D Aefx Afxot Elevator belt Vibrating feeder for re-separation Re-separator IMRO Frames Control cabinet Additional rotor for hammer mill, in new condition Additional spare parts for hammer mill

Condition: like new (used), Year of construction: 2022, operating hours: 200 h, functionality: fully functional, screw diameter: 70 mm, overall weight: 600 kg, clamping force: 80 kN, total width: 2,800 mm, total length: 4,000 mm, total height: 2,260 mm, Main Features: 1. Computer Control System (PLC) – Japanese Mitsubishi PLC 2. Electrical Cabinet – All electrical components are sourced from globally renowned brands, ensuring quality and stability. 3. Touch Screen – Innovation computer control system 4. Advanced Hydraulic Cylinder from Germany 5. Linear Guideway 6. ABB Inverter from Switzerland & Rexroth from Germany 7. Large Diameter Galvanized Steel Pipes 8. Electric Lifting Platform 9. Ceramic Heater 10. Hydraulic System & Valve Connections – From Yuken Industry Dodpfov Iflpjx Afxskt Technical Specifications: • Suitable Material: PE, PP, and others • Max Volume: 6 L • Production Capacity: 170-260 pcs/h • Dimensions: 4.0 × 2.26 × 2.8 m • Weight: 6T Plasticization System: • Reducer: Hard finishing, high strength, low noise • Screw: Ø 70 mm, L/D ratio 24, 38CrMoALA, cooling system available • Plasticization Capacity: 100 kg/h (HDPE) • Heating Zones: 3-4 aluminum heaters, automatic heating • Heating Power: 12 kW/h • Extruder Motor: Three-phase asynchronous motor (380V, 50HZ) • Cooling Fan: 4 zones, automatic cooling Extrusion System: • Material: High-grade alloy steel, central feeding • Number of Die Heads: 1 • Max Die Mouth Diameter: Ø 160 mm • Heating Zones: 4, stainless steel heating cycle • Heating Power: 5-7 kW Clamping System: • Features: High strength, rigidity, central mold locking, stable mold opening & closing • Clamping Force: 80KN • Template Distance Adjustment: 170-520 mm • Max Mold Size: 380 × 420 mm Electric System: • Automatic Monitoring, Fault Alarms, Auto Counting, Auxiliary Functions • Control Interface: Touchscreen with self-diagnosis alarm system • Temperature Control: Automatic temperature control module • Motion Control: Inovance (Chinese/English version) Hydraulic System: • Features: Multi-functional integrated hydraulic block, proportional control, high efficiency • Oil Pump Motor: Three-phase asynchronous motor (380V/220V, 50/60HZ) • Oil Pump: Imported double pump • Valves: Imported oil pump valves and connections • Oil Pipes: Double-layer wear-resistant • System Pressure: 60 kg/cm² • Cooling System: Separate water cooling cycle, oil cooler Pneumatic System: • Brand: Taiwan AIRTAC pneumatic system • Air Pressure: 0.6 MPa • Air Displacement: 0.8 m³/min • Electromagnetic Valve: Taiwan AIRTAC Main Components: Electronic Parts: • PLC Control System: MITSUBISHI from Japan • Touch Screen: INOVANCE • Temperature Controller: HUICHUAN • Auxiliary Relay: OMRON • Contactor: Schneider from France • Electric Motor: Three-phase 380V • Power Source: TAIWAN MEANWELL • Transducer: ABB from SWITZERLAND Hydraulic Parts: • Oil Pump: TAIWAN HIGH-TECH • Valve: YUKEN • Oil Pump and Connection: YUKEN • Sealed Part: HALLITE Air Control System: • Cylinder: AIRTAC • Air Valve: AIRTAC This blow molding injection machine was purchased directly from a factory in China for a specific project that was never realized. The machine was used for only one month. Location: Siemianowice Slaskie, Poland We also have peripheral equipment available for sale, such as: • 5 HP AIR COOLING SYSTEM • Auto Loading • 150 kg Color Mixer • Scraps Crusher

Year of construction: 2023, operating hours: 2,980 h, condition: used, machine/vehicle number: 140497, Fiber laser cutting system for large-format sheets, frame construction, sheet size up to 4,065 x 2,025 mm, travel ranges: x: 4,200 mm, y: 2,070 mm, z: 130 mm, powerful IPG laser source with 10 kW power, highly developed cutting head with automatic adjustment of the focus position, automatic pallet changer system, integrated control and drive system, Touch-L control with a 19" flat screen, scrap conveyor with collection container, large-format automation type FL for loading and unloading pallets for formats up to 4,000 x 2,000 mm in 2 levels, including Thermotec cooling unit and Camfil filter unit. Dedpfxjzqzb Us Afxjkt

Condition: used, maximum load weight: 24,300 kg, overall weight: 32,000 kg, axle configuration: 3 axles, first registration: 07/2014, loading space length: 11,600 mm, loading space width: 2,450 mm, loading space height: 17,003 mm, Year of construction: 2014, Equipment: ABS, Well-maintained tipping semi-trailer for scrap transport, Wytwornia Zabudow Poland Equipment: Chassis frame made of aluminium BPW axles Dedpfjzckarjx Afxekt Crank support legs Electric tarpaulin with remote control Grain discharge slide LED reversing lights Warning sign Platform on the front wall Tyre condition approx. 60% For equipment-related inquiries, please call. Subject to errors and prior sale!

Condition: new, Year of construction: 2026, Pallet wrapper, stretch wrapper, semi-automatic | 2,000 kg | 2,000 mm | NEW For sale: a new, semi-automatic pallet wrapper for the professional packaging and transport securing of palletized goods using stretch film. Ideal for production facilities, warehouses, logistics, shipping, wholesale, and industry. This machine is suitable for companies that regularly wrap pallets and want to significantly reduce manual packaging effort. Technical data Max. pallet weight: 2,000 kg Standard wrapping height: 2,000 mm Turntable diameter: 1,650 mm Turntable speed: 3–12 RPM Manufacturer's stated performance: 20–45 pallets/hour Suitable pallet size: 500–1,200 mm length × 500–1,200 mm width Machine dimensions: approx. 2,950 × 1,650 × 2,485 mm Turntable height: 80 mm Machine weight: approx. 650 kg Motor power: 1.5 kW Power supply: 220 V / 50 Hz / 1-phase Stretch film Film type: LLDPE stretch film Film width: 500 mm Film thickness: 17–35 μm Roll core: 76.2 mm Max. roll diameter: 250 mm Advantages For pallets up to 2 tons Up to 2 meters wrapping height Dodjzwguajpfx Afxokt Adjustable turntable speed High packaging performance 220 V connection Robust design for commercial and industrial applications Significantly more efficient than manual wrapping Condition: NEW Suitable for warehouses, production facilities, logistics centers, shipping departments, and other companies with regular pallet volumes. If you are interested or have technical questions, please do not hesitate to contact us. Other packaging machines, strapping machines, carton sealing machines, and pallet wrappers are also available upon request. Note: Technical specifications and performance figures are based on manufacturer's data. Actual performance depends, among other things, on pallet size, wrapping program, and application.

Year of construction: 2002, condition: used, electric clutch brake, clutch/brake combination, clutch-brake combination for strapping machine, packaging machine, strapping machine, skinpack machine, wrapping machine, winding machine, drive unit for stretch wrapping machine -Manufacturer: Bonfiglioli, drive unit from packaging machine ILAPAK Astra-STD -Type: GFF 200014/112 EE B3 -Motor: 24 VDC / 35 W -Individual components: see photos -Dimensions: 345/180/H230 mm -Weight: 22 kg Dkedsu Npg Ropfx Afxjt

Year of construction: 1997, condition: used, functionality: fully functional, machine/vehicle number: 13205, For sale is a pallet wrapping machine from the manufacturer STREMA. This machine is ideal for operations that value transport safety and efficiency. Technical details: Manufacturer: STREMA Stretch Packaging Systems Model: M 500 Dksdpfxoy Em Dtj Afxjt Year of manufacture: 1997 Machine number: 13205 Connection: 400 V Power: 0.4 kW Base dimensions: 2,500 x 1,500 mm Turntable diameter: 1,500 mm Total height: 2,500 mm Recommended installation area: 4 x 3.0 m Max. pallet weight: 1,500 kg Transport and loading can be organized Europe-wide upon request, at an additional cost. All prices plus VAT Inspection possible by appointment. Contact us – our team is happy to assist you. Trade-in or exchange possible! Machinery Purchase / Sale BUYING / SELLING OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website.

Condition: excellent (used), Automatic pallet wrapper Inventory No. 3809 Manufacturer: Cyclop Type GL 200-11 Dkedpfxey T Ialo Afxot * Turntable positioning via fixed stop * Number of top and bottom wrapping cycles * Turntable diameter 1650 mm * Max. wrapping height approx. 2400 mm * Own weight approx. 450 kg * Suitable for Euro pallets and block pallets!!! * In very good condition

Condition: excellent (used), Automatic pallet wrapper Inventory No. 3810 Manufacturer: Cyclop Type GL 200-11 * Turntable positioning via fixed stop * Number of top and bottom wrapping cycles * Turntable diameter 1650 mm * Max. wrapping height approx. 2340 mm * Weight approx. 450 kg Djdpfx Aoy T I S Usfxokt * Suitable for Euro pallets and block pallets!!! * In very good condition

Condition: used, Year of construction: 1985, sheet width 3100 mm plate thickness 4.0 mm thickness at "Niro-steel" 2.5 mm cutting angle adjustment 1.0 ° Dedpfx Afsxab Tvjxjkt back stop - adjustable 10 - 1000 mm adjustment speed 180 mm/s down holder 21 Stück strokes per minute 18 - 31 oil volume 160 L Control ELGO P8511 column arm 200 mm distance between columns 3050 mm 0 max. 300 bar voltage 400 V main drive 9.0 kW weight of the machine ca. 4800 kg. dimensions of the machine ca. 3660 x 2070 x 2140 mm from a maintenance workshop Equipment: - electro-hydraulic sheet metal shear "swing cut" - machine frame = all-steel welded construction - ELGO NC control model P8511, control panel at the front left * for positioning the electro-motoric rear stop * target/actual position value input possible * adjustment by three-phase motor via toothed belt - support table with ball rollers * there are recessed grips between the table plates - front finger guard - hydraulically acting sheet metal hold-down device - 1x freely movable foot switch - emergency stop button at the front - movable scrap switch - original operating instructions + circuit diagram Special accessories included: - EHT pneumatic sheet metal holding device for thin sheet metal cuts - 1x EHT extra long side stop 3.000 mm with mm scale & support foot - 1x EHT extra long support arm with 3.000 mm with scale & Support foot - EHT additional support arms with mm scale

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, cutting force: 500 t, power: 110 kW (149.56 HP), total width: 3,500 mm, total length: 14,000 mm, total height: 4,000 mm, overall weight: 58,000 kg, cutting length (max.): 1,200 mm, year of last overhaul: 2020, Hydraulic scrap shear Taurus SM540 Cutting force: 500 t Drive: 2x 55 kW Dkjdpfx Afsmx Twroxet Machine ex location South-Germany Dismantling and loading: On request by personnel IUT Beyeler AG Year of construction: 1998 Availability: end of february 2024December 2023 Machine can be visited in operation near DE - 66111 Saarbrücken Price including dismantlin and loading on trucks ( all expenses at our side )