Used Scm Windor 60 for sale (581)

Year of construction: 2007, condition: ready for operation (used), functionality: fully functional, workpiece length (max.): 3,200 mm, workpiece width (max.): 200 mm, workpiece height (max.): 130 mm, TECHNICAL DETAILS Workpiece Dimensions Max. workpiece length: 3,200 mm Min. workpiece length: 200 mm Max. workpiece thickness: 130 mm Min. workpiece thickness: 30 mm Max. workpiece width: 200 mm Min. workpiece width: 30 mm Tenoning Carriage Tenon length at max. tenoning diameter: 320 mm Tenoning carriage speed: 0 - 40 m/min Profiling speed: 4 - 20 m/min Table height for profiling: 850 mm Feed roller diameter: 100 mm Distance between feed rollers: 150 mm Crosscut Saw Motor power: 4 kW Speed: 3,000 rpm Spindle diameter: 40 mm Max. tool diameter: 400 mm Milling Unit for Tenoning High-performance spindle with upper bearing: Diameter 50 mm, length 620 mm Motor power: 7.5 kW Speed: 3,500 rpm Max. tool diameter: 320 mm Axis travel below work table: 575 mm Milling Unit for Profiling Spindle: 50 x 320 mm Motor power: 7.5 kW Speed: 6,000 rpm Min./max. tool diameter: 130 - 250 mm Spindle Speed: 1,000 - 12,000 rpm Max. motor power: 11 kW Max. tool diameter: 230 mm Tool positions: 24 Nodsxx Un Ropfx Agzowr Max. weight per tool: 10 kg EQUIPMENT Automatic chip protection Jolly Automatic brake RAPID 24 automatic tool changer Fast vertical adjustment via brushless motors Water cooling for electrospindle Vector rotary axis for 360° electrospindle rotation Note: Further technical details can be found in the attached document!

Condition: good (used), Year of construction: 2007, Technical characteristics : - Max machinable length 3200 mm - Minimum machinable length 200 mm - Maximum width 200 mm - Minimum width 40 mm - Maximum workpiece height 130 mm - Depth with max Ø to tenon 320 mm: 105 mm - Tenoning carriage speed min / max 0/100 m / min - Min / max profiling speed: 3/15 m / min Tenoning: 1- end cut saw 5.5 hp (4 kW) Saw Ø 400 mm 2- tenoning router Counter bearing 50 x 620 mm 15 hp (11.3 kW) Max tool Ø 320 mm Axle stroke 575 mm Nwjdpfx Ajt R T Hcogzor Automatic splinter guard 3- tenoning router Counter bearing 50 x 620 mm 15 hp (11.3 kW) Max tool Ø 320 mm Axle stroke 575 mm Automatic splinter guard Vertical positioning with continuous axis 4- Digital angular adjustment clamp Profiling: 5-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tools 130/240 mm Axle stroke 280 mm Time-delayed anti-shattering intervention during calibration Double direction of rotation Vertical and horizontal positioning with continuous axis 6-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tool 130/240 mm Axle stroke 280 mm Vertical and horizontal positioning with continuous axis 7-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tool 130/240 mm Vertical and horizontal positioning with continuous axis 8-: close-out recovery group Vertical and horizontal positioning with continuous axis Device for extracting the shutter 9-: lower horizontal shaft for groove Vertical and horizontal positioning with continuous axis 88.5 hp (66.4kW) 10-: digital guide 11-: Return of parts to the operator NO TOOLS AVAILABLE OBTAIN ADDITIONAL PHOTOS NOTE: SUBJECT TO CHANGES IN TECHNICAL DATA

Condition: excellent (used), Year of construction: 2018, SCM Wide Belt Sander dmc sd 60 DMC60 RCS 110 AB /00003689 European safety regulations (CE marking) Voltage 400 V EU Frequency 50 Hz Sanding width: 1100 mm Version "B" for RCS Infeed and outfeed roller table for long workpieces Electronic programming unit "LOGIC SC" "RA" obliquely ribbed steel contact roller – 1st unit 2nd unit sanding pad unit Main motor 15 kW (20 HP) Location: at customer site Nedpfx Agsx Nrwmjzewr - immediately available -

Condition: used, Year of construction: 2007, Tenoning spindle 3 St. Number of milling agregates 5 St. Spindle diameter 50 mm Control Control 100 PC SCM Windor 100 CNC ----- Powerful and flexible CNC manufacturing system for windows and doors Processing of workpieces up to a maximum length of 4500 mm, width of 250 mm, and thickness of 150 mm Consists of a Windor 60 model B Infeed conveyor Slotting section: ----- Item 1: Miter saw ----- - Motor 4 kW - 3000 rpm - Spindle diameter 40 mm - Maximum tool diameter 400 mm, bore 80 mm Item 2: 1st slotting spindle ----- - High-performance spindle with top bearing, spindle length 620 mm - Spindle diameter 50 mm - Motor 11 kW - 3500 rpm - Maximum tool diameter 370 mm - Locking device "Jolly" - Continuous vertical positioning - Interpolating rotations, automatic inclined window adjustment +/- 60 degrees Item 3: Electric spindle with HSK 63 F tool holder ----- - Min/max. Rotation speed 1000-12000 rpm - Maximum motor power 11 kW - Water cooling - Rapid 24 automatic tool changer with 24 positions Item 4: 2nd slotted spindle ----- - High-performance spindle with top bearing, spindle length 620 mm - Spindle diameter 50 mm - Motor 11 kW - 3500 rpm - Maximum tool diameter 370 mm - "Jolly" locking device - Continuously variable vertical positioning - Interpolating rotations, automatic inclined window device +/- 60 degrees Item 5: 3rd slotted spindle ----- - High-performance spindle with top bearing, spindle length 620 mm - Spindle diameter 50 mm - Motor 11 kW - 3500 rpm - Maximum tool diameter 370 mm - Locking device "Jolly" - Continuous vertical positioning Fleximat ----- Including left and right stops with horizontal CNC adjustment for the following through-feed operations: Lock case milling and 9-degree anuba drilling from the right. Dowel drilling and strike plate marking from the left and right, 7 spindles each. Cup hinge drilling and olive drilling from the top. Profile part ----- Item 5: Power 2000 F4: Electric spindle with HSK 63 F tool holder ----- - Working from the left - Min/Max. Rotation speed 1000-18000 rpm - Maximum motor power 12 kW - Water cooling - Rapid 24 automatic tool changer with 24 positions Item 6: 1st profile spindle from the right ----- - High-performance spindle with top bearing, spindle length 620 mm - Spindle diameter 50 mm - Motor 11 kW - 6000 rpm - Tool diameter min./max. 130-250 mm Njdpfew Im Iiex Agzowr - Continuously variable vertical positioning - Continuously variable horizontal positioning Item 7: 2nd profile spindle from the right ----- - High-performance spindle with top bearing, spindle length 620 mm - Spindle diameter 50 mm - Motor 11 kW - 6000 rpm - Tool diameter min./max. 130-250 mm - Continuous vertical positioning - Continuous horizontal positioning Item 7: 3rd profile spindle from the right ----- - High-performance spindle with top bearing, spindle length 620 mm - Spindle diameter 50 mm - Motor 11 kW - 6000 rpm - Tool diameter min./max. 130-250 mm - Continuous vertical positioning - Continuous horizontal positioning Item 8: Power 2000 F4...

Condition: new, Wide belt sanding machine for calibrating and fine sanding Working width mm 1,100 Min/ Max. working height mm 4/ 170 Sanding belt width mm 1,115 Sanding belt length mm 2,150 Gear motor kW 2.2 Feed speed m/min variable Infeed and outfeed support rollers for long and short workpieces Oscillating belt cleaning 1st unit Oscillating belt cleaning 2nd unit Oscillating belt cleaning 3rd aggregate 10” touch screen control panel “eye-S” 1. Aggregate steel roller 2. Aggregate rubberized calibrating roller 85SH Nwsdpfx Agsitvkuezer 3. Aggregate combi-aggregate pneumatic seg. sanding pad /rubberized sanding roller 35 SH Motore power 1st unit kW 18.5 Motor powert 2nd & 3rd aggregate kW 18.5 Version "B" for RRCS with: Pneumatic switching on and off 1st aggregate Pneumatic switching on and off 2nd aggregate Pneumatic switching on and off 3rd aggregate "MESAR" with elastic segmented sanding pad Pneumatic switching on and off of the sanding pad unit electronic adjustment of the working height SPECIAL PRICE! IMMEDIATELY AVAILABLE

Condition: used, Year of construction: 2005, functionality: fully functional, length stop: 3,200 mm, tool diameter: 400 mm, spindle diameter: 50 mm, spindle stroke: 640 mm, spindle speed (max.): 3,000 rpm, milling spindle length: 320 mm, saw blade diameter: 400 mm, height adjustment type: electric, type of input current: AC, working height: 130 mm, working width: 200 mm, SCM Windor 60/100 – Angle Processing Center Manufacturer: SCM Group Year of manufacture: 2005* 1. General Description of the System The system in question is a window and door production line of the type Windor 60/100 from the manufacturer SCM Group, built in 2005. It is a CNC-controlled angle processing center designed for the industrial machining of frame and sash components. The system is configured for series production and enables precise, repeatable machining in integrated process steps. 2. Main Components of the System 2.1 SCM Windor 60/100 Angle Processing Center The SCM Windor 60/100 features a modular design and is configured as an angle processing unit. Machining takes place on a tenoning side and a profiling side positioned at right angles to each other. The system combines several machining steps – such as milling, drilling, grooving, rebating, and tenoning – in a fully integrated, CNC-controlled process. Key Features: * CNC multi-sided machining * Multiple milling and processing spindles * Automated tool handling and changeover * High dimensional accuracy and repeatability 2.2 Fleximat Drilling Center Nwjdpfx Agjx Nqqxszor The Fleximat drilling center is integrated into the system and is used for the precise execution of boreholes for joints and fittings. Machining is CNC-controlled with both vertical and horizontal drilling units. 2.3 Profiler Center The profiler center is designed for contour-forming milling operations and consists of two processing sides: Right side: * Lifting spindle with height adjustment * Suitable for variable profile and contour processing Left side: * 24-position tool changer * Automatic tool changing to minimize setup times * Suitable for complex profile milling 2.4 Löwer Surface Sanding Machine A surface sanding machine from Löwer is integrated into the production line. The machine is used exclusively for surface sanding, serving to improve the surface quality of the processed workpieces. 3. Control, Operation, and Safety The system is equipped with a CNC control unit that manages all machining operations, tool changes, as well as feed and spindle movements. Operation is semi- or fully-automated by trained personnel. The safety features are state-of-the-art as of the time of construction (2005) and include, in particular: * Mechanical guards and enclosures * Emergency stop devices * Safety locks on moving machine parts 4. Optional Expansion: SCM Topset XL Planer (10-spindle) For expansion of the existing machinery, provision has been made for a SCM Topset XL planer with 10 spindles. This machine will be operated as a standalone processing station at a separate location within the production hall and is not directly integrated into the CNC control of the Windor system. The system is available and can be dismantled at any time. Dismantling and transportation are to be organized by the buyer. Available from 07.01.2026

Condition: like new (used), Year of construction: 2021, functionality: fully functional, Shelf length: 3000 mm Shelf width: 1300 mm 6 hydraulic pistons Emergency stop switch (pull cord) Electric oil heater Weight: 3300 kg Touchscreen display Nwjdpjxxkmiofx Agzor Time programmer Year of manufacture: 2021

Year of construction: 2014, condition: like new (used), "EASY PLUS" electronic control from the control panel 2 axes: - Automatic control of the left spindle vertical and horizontal position of the upper spindle. - Selection of the feed speed. - 7 "color LCD display Min.working width (finished size) 25 mm Working width (finished size) 230 mm Min.working height (finished size) 6 mm Working height (finished size) 120 mm Min. Length of a single element 450 mm Variable feed speed controlled by an inverter 5 - 25 m / min Pneumatic pressure of the feed shafts Top feed shaft in front of the planer 3kW feed motor power 5.5 kW planer motor power Vertical spindle motor power (single) 11kW Power of the upper horizontal spindle motor 9kW Spindle speed 6000 rpm. Spindle diameter 40 mm Length of the vertical spindles 140 mm Nwsdpoh Nvt Usfx Agzsr Length of the horizontal spindles 250 mm Axial adjustment of the vertical spindles relative to the 40 mm worktable Axial adjustment of the horizontal spindles in relation to the right ruler of 40 mm Min./max. tool diameter on the planer 120 - 140 mm Min./max. tool diameter on vertical spindles 100 - 180 mm Max. Profile on the vertical spindle 40 mm Min./max. tool diameter on the upper spindle 125 (100-180) mm Feed shaft diameter 140 mm Length of the feeding table 2000 mm Quick adjustment of the table at the entrance and 10 mm ruler Manual pump for greasing the STD table

Condition: as good as new (ex-display), Year of construction: 2014, Exhibition machine Year of manufacture 2014 Cutting length 2600 mm Cutting width 1270 mm Cutting height at 90° = 130 mm Height adjustment electromotive saw blade diameter 400 mm swivel adjustment 0 - 45° electromotive motor 7 kW speeds 3000/4000/5000 rpm Control: display with separate keyboard swiveling control panel at eye level USB interface 300 programming memory locations electronic position display at the parallel fence cross section frame with parallelogram -manual adjustment -angle adjustment +50 -50° with digital display Nsdpfx Ajkwha Esgzewr -length and angle measurement automatic star-delta switch Original price 25950.- Availability: short term Location: Switzerland

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, No reserve price - guaranteed sale at the highest bid! Line consists of: Nwsdpsvy Ahxsfx Agzer SCM Windor 100 SCM Superset NT SCM Profitech SCM Fleximat SCM Windor 100

Condition: as good as new (ex-display), Year of construction: 2021, functionality: fully functional, grinding width: 1,350 mm, SCM wide-belt calibrating and fine sanding machine Model dmc sd 60 RCS 135 Technical data: Working width 1,350 mm min./max. working height 4-170 Sanding belt width 1,370 mm Sanding belt length 2,150 mm Main motor power 11 (15) kW (HP) Gear motor 0.45/0.8 (0.6/1.1) kW (hp) Feed speed 4.5/9 4.5/9 m/min. Standard equipment: - R140/85 rubber-coated calibrating roller diameter 140 mm 85 SH - 1st pos. Nwedpfx Agjtwqn Sezer - R160/45 rubber-coated sanding drum diameter 160 mm 45 Sh - 2nd pos. - Hard sanding pad with manual adjustment of the working height - Motor power 1 unit 11 kW (15 HP) - Electronic ammeter for the main motor to display the power consumption - Electronic display of the working height - Electronically controlled sanding belt oscillation - Rubber pressure rollers - anti-kickback device in the infeed before the first unit - Rubber feed carpet 60 SH - Roller table with two rollers in the infeed and outfeed of the work table - Carpet feed with two speeds 4.5 / 9 m/min with gear motor - Automatic carpet centering incl. the following special accessories: 1 pc. Version "B" for RCS with: pneumatic activation and deactivation of the roller 1. unit "R" + pneumatic activation and deactivation of the roller 2. unit "CS" + "MESAR" elastic link sanding shoe + pneumatic activation and deactivation of the sanding shoe unit + electronic programming unit "LOGIC 50 + electronic adjustment of the working height 1 pc. CE safety regulations 1 pc. roller table in infeed and outfeed for long workpieces, equipped with 5 non-driven rollers 1 "RA" inclined ribbed steel contact roller 1st unit 1 pc. Main motor 18.5 kW (PS 25)

Condition: new, - NEW -GENERAL FEATURES:machine frame and worktable* steel structure with electrical cabinet at the front of the machine* sanding belt infeed from the left side of the machine* motorized table height adjustment* main motor integrated in the machine frameelectrical equipment* electromechanical control panel on the front left side of the machine* automatic star-delta start for the main motor* motor protection switch for the motors* motors in insulation class IP 54emergency and protective devices* Safety microswitch for excess thickness* Automatic brake for immediate stopping of the units* Emergency stop safety edge in the workpiece infeed* Mushroom switch in the workpiece infeed and outfeed* Lockable main switch* Automatic emergency shutdown of the machine in the event of:- sanding belt breakage- untensioned sanding belt- protection against lateral movement of the sanding belt- lack of compressed air- overload of the main motorsNote: the standard version with 400 volts 50 Hz requires a three-phase power supply zero conductor ground the 400 volt power supply is without neutral, a single-phase transformer from the price list must also be ordered. The same transformer must also be ordered for a machine with a voltage higher than 400 volts, regardless of whether a neutral conductor is present or machine version with 220 or 230 volts (50 or 60 Hz) is subject to additional costs (see price list).BASIC MACHINE STANDARD EQUIPMENT- R140/85 rubber-coated calibrating roller diam. 140 mm 85 Sh - 1st pos.- R160/45 rubber-coated sanding roller diam. 160 mm 45 Sh - 2nd pos.- Hard sanding pad with manual adjustment of the working height- Main motor 11 kW (15 HP)- Electronic ammeter for the main motor to display the power consumption- Electronic display of the working height- Electronically controlled sanding belt oscillation- Rubber pressure rollers- Kickback protection in the infeed in front of the first unit- Rubber feed carpet 60 Sh- Roller table with two rollers in the infeed and outfeed of the work table- Carpet feed with two speeds 4,5 / 9 m/min withgeared motor- automatic carpet centeringworking width mm 1.100Min./Max. working height mm 4 - 170Sanding belt width mm 1,115Sanding belt length mm 2,150Main motor power kW (HP) 11 (15)Gear motor kW (HP) 0.45/0.8 (0.6/1.1)Feed speed m/min 4.5/9Consisting of:10.90.87 European Safety Regulations(Mark C.E.)93.07.31 Volt 400 EU93.12.01 Frequency 50 Hz44.44.19 Version "B" for RCS33.31.50 Roller table in infeed and outfeed for long workpieces62.44.50 10" control panel with "eye-S" software integration31.21.60 "RA" inclined ribbed steel contact roller - 1st unit97.50.71 Main motor 15 kW (PS 20) Nwjdpfx Agevwfrnezsr

Condition: used, machine/vehicle number: 008132, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Nedpfx Agjw Idc Rezjwr Max feed speed: 18 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: ready for operation (used), Year of construction: 2018, Main Drive Spindle motor power 11 kW This SCM DMC sd60 belt sander was manufactured in 2018. It features a working width of 1,100 mm and handles materials from 4 to 170 mm in height. Equipped with a main motor of 15 kW, it offers feed speeds of 4.5/9 m/min. Additional features include a rubber-coated calibration roller, sanding roller, hard sanding pad, and electronic controls for precise operation. Consider the opportunity to buy this SCM DMC sd60 belt sander. Contact us for more information. Njdpfx Agjx Nr Sdszswr Application Types Sanding

Condition: used, Year of construction: 2007, Spindle tiltable: Yes, -45 to +45° Height adjustment: electric / position control Tilting adjustment: electric / position control Njdpfx Aox I Aiwegzewr Fence adjustment: electric / position control Height display: digital Tilting angle display: digital Fence position display: digital Spindle diameter: 30 mm, 40 mm, collet chuck for shank cutters Speeds: stepless variable Motor power: 7.5 kW Motor brake: Yes, automatic Extraction connection: 2 x 120 mm Machine length: 2600 mm Machine depth: 1400 mm Weight: 1100 kg

Condition: new, Clean air extraction / dust extractor Dust-tested to H3, residual dust content less than 0.1 mg/m³ Suitable for extracting and separating dry wood and plastic chips High extraction performance with low space requirement Maximum performance in this class Very quiet Designed for commercial use Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right for flexible use Large inspection openings Large, mobile chip container with clamping bracket and chip collection bag Dust extractor already fully assembled on delivery, so can be used quickly All models are mobile Polyester fleece filter material, aluminized, therefore with long service life Antistatic filter tested and approved to category M-BIA as standard The fan is connected downstream of the filter Efficiency class extraction motor IE3 Nodpfxor A Eq Rj Agzewr Nominal volume flow 1448 m³/h Nominal negative pressure 2242 Pa Power drive motor 2.2 kW, 400 V, 50 Hz Chip collection volume 2 x 165 l Nominal width of external suction connection inlet 160 mm Filter area 9.21 m² Residual dust content < 0.1 mg/m³ Sound pressure level max. 73 dB(A) L x W x H approx. = 1618 x 830 x 1653 mm Weight approx. 268 kg VERSION PM Automatic filter cleaning with pneumatic system that moves a scraper frame

Condition: excellent (used), 4-SIDED SIZING-SHAPING LINE (currently for Internal Doors). Composed by of the following machines: X10023A) Motorized infeed rollers table "CELASCHI"" X10023B) Double End Tenoner "CELASCHI" Mod. TSA 3 B 480 A Installed power KW 65 X10023C) 90° Motorized Transfer ("L-shape") conveyor "CELASCHI" Mod. Nodpfswzmbqex Agzewr X10023D) Double End Tenoner "CELASCHI"" Mod. TSA 2 B 360 Installed power KW 60

Condition: used, Year of construction: 2012, CNC machining centre SCM Morbidelli M-600 5-axis machine Year of construction 2012 Machine no. AA2/002032 Working distance X-axis 5020 mm Working distance Y-axis 1680 mm Working distance Z-axis 250 mm Tool positions 36 Vertical drilling spindles 24  Software SCM XILOG MAESTRO SCM PRISMA K SCM TTS system Milling spindle liquid-cooled SCM TecPad MORBIDELLI TV Matic SCM PRO-SPACE SCM RAPID 12 SCM RAPID 24 Including vacuum pump Capacity 250 m3/h Disassembled for transport Weight 7450kg - Year: 2012 - Documentation available: No - CE certificate present: No - Serial number: AA2/002032 - Drilling unit present: Yes - └ Vertical drilling spindles [pcs.]: 24 - Tool changer positions [pcs.]: 36 - System/software: SCM Maestro - Vacuum pump present: Yes - └ Capacity [m³/h]: 250 - Working range X [mm]: 5020 Njdewnhccspfx Agzjwr - Working range Y [mm]: 1680 - Z-axis working range [mm]: 250 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: good (used), Code: 0247 Brand: SCM Model: L'INVINCIBILE SI 6000 - CE Standard Automatic panel saw with TOUCH SCREEN VANGUARD electronic control and tilting blade with scoring unit for precise cutting of panels, furniture, custom-made furnishings, kitchens, window frames, doors, plastics, composite materials, and various - CE Standard Sturdy structure to ensure maximum working precision Cast iron worktop with extension top Patented SCM sliding carriage in extruded aluminum with large section, rigid and with closed lattice structure for maximum resistance even with heavy loads Parallel guide with precision at 25 m/min Automatic adjustment of scoring unit 2 digital displays on the square guide VANGUARD TOUCH SCREEN control - Manual, semi-automatic, and automatic modes - Operator assistance system - 12-inch color video and Touch Screen function Full Support frame tiltable from + 50° to - 50° for angled cuts with panels of any size Overhead control panel Start/stop buttons integrated into the carriage Technical data: Carriage length 3200 mm Extendable fence for square cuts up to 3200 mm Cutting width with parallel fence 1500 mm Blade diameter 400 mm F30 Scoring blade diameter 120 mm F20 Max cutting height at 90° 130 mm Max cutting height at 45° 92 mm Blade motor power 7,5 Hp Nwjdoxz Ekbopfx Agzer Scoring blade motor power 0,75 hp Suction port diameter mm 120/100 Overall dimensions of assembled machine mm 3400 x 4300 x 1720 h Overall dimensions for transport mm 3400 x 2350 x 1720 h Weight kg 1380

Condition: excellent (used), Four-sided planer SCM Superset XL 260x180mm Working width: 15-260 mm Working height: 6-180 mm Number of spindles: 5 Spindle arrangement: Bottom 7.5 kW Right 7.5 kW Left 7.5 kW Top 7.5 kW Bottom 5.5 kW Spindle rotation speed: 6,000 rpm Pneumatic pressure rollers Feed speed adjustable by variator: 5-25 m/min Drive via cardan shafts Nwedpfx Agjx Aigpezjr CE certificate

Condition: used, Year of construction: 2016, MACHINING CAPACITIES: - Panel height (thickness) to be processed: 8 to 60 mm 10 to 45 mm when using the corner rounding unit - Panel length: >=220 mm - Panel width: 90 to 1100 mm - Feed (advance speed): 11 m/min - Workpiece overhang: mm - Minimum-maximum dimensions for panel radiusing: Ø x mm - Panel overhang relative to the conveyor belt: - Max spindle cutting depth: mm² - Workpiece gap: mm Roll edging: - Thickness: 0.4 to 3 mm - Width (height): panel thickness +4 mm - Minimum length: 200 mm Strip edging: - Maximum thickness: 6 mm maximum 3 mm with corner rounding unit - Width (height): panel thickness +4 mm - Minimum length: 220 mm 280 mm with corner rounding MACHINE CONFIGURATION: - Unwinding table, usable Ø795 mm - Working table: L 4.15m / H 91.5 cm With 500 mm front extension - Chain feed conveyor - Anti-adhesive spray system - Edge trimming units (2 spindles) 12,000 rpm - Gluing station with interchangeable glue pot, 180-200°C Pneumatic pre-cut guillotine Pressure section with 3 rollers, 1 of which is motorized - End-trimming aggregate with 2 blades, 12,000 rpm - Top/bottom flush trimming unit with copying pads - Corner rounding unit - Radius scrapers - Straight scrapers Digital counters for settings (type SIKO) OTHER FEATURES: - Main power supply: 400V, 3-phase, 50Hz, IN 21A - Feed motor: 0.75 kW - Spindle motors: 2 x 1.5 kW Nwedpfx Agox Dcn Nozer - Saw motors: 2 x 0.19 kW - Trimming (milling) motors: 2 x 0.55 kW, rpm - Pneumatic supply: 8–10 bar, dry air Required working pressure: 6 bar - Extraction ports: 3 x Ø75 mm int. + 2 x Ø50 mm int. + Ø95 mm int. Required volume flow: 1600 m³/h - CE marking, lockable safety switch, emergency stop push buttons Operating dimensions: 4.45 x 1.70 x h.1.80 m Transport dimensions (L x W x H): 4.25 x 0.90 x h.1.50 m Weight: 1430 kg

Condition: good (used), Year of construction: 2006, SCM - spindle moulder - FORMULA T60F Nedpjx Elwrefx Agzewr Used machine Year: 2006 Table length: 1200 mm Table width: 720 mm RPM: 3000 / 4500 / 6000 / 8500 / 10000 Manual spindle height adjustment

Condition: used, Year of construction: 2020, functionality: fully functional, Edgebander SCM K560HP - year 2020. FULL SERVO DRIVES. Serviced by authorized SCM service. Fully functional, currently in operation. Scheduled dismantling of the machine: January/February 2026. Full description of functions in the attached photos. Inspection and testing on site possible. Nwjdpfsxn T Sgjx Agzjr

Condition: used, SCM Sandya 600 RCS 110 Nwjdoxtan Sopfx Agzer Wide-Belt Calibrating and Fine Sanding Machine The advanced sanding center for calibration, solid wood sanding, and fine veneer sanding TOP Equipment 1. Calibration sanding unit with RA diagonally ribbed steel contact roller 2. Combination sanding unit with 140 mm diameter contact roller, 85 Shore hardness, elastic segmented sanding shoe with electronically controlled sectors Working width 1100 mm Main motor power 15 kW Design "B" for RCS MESAR elastic segmented sanding shoe electronic programming unit "LOGIC SC screen control" electronic adjustment of working height with automatic workpiece detection Roller table in infeed and outfeed for long workpieces Machine from small craft business / LEASE RETURN First delivery 2017 ex stock Lieboch / LEASING OPTION

Condition: good (used), functionality: fully functional, SPINDLE MOULDER with tilting spindle model SCM T160 L’Invincibile second hand machine spindle tilting by electric -5 ° / + 45 ° spindle lifting by electric Nedpfx Aevzghregzewr motor power Hp 5,5 shaft diameter mm. 50 volt. 380/50 weight kg. 1000