Used Tree Grab for sale (1,537)

Condition: used, Year of construction: 1992, operating hours: 10,150 h, This Eder mobile crane, model M 825 B, used in the sawmill, was manufactured in 1992 and has approximately 10,150 operating hours. The crane is equipped with a Hultdins SuperSaw tree grapple, including a saw, which can be used to move and shorten logs. Saw blade: 75 cm. Clamp: 58 cm. Rotor: 16,000 kg. Crsdpfjyzpg Aox Aktji If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: used, Year of construction: 1998, operating hours: 8,260 h, Equipment: all wheel drive, * From municipal ownership * Cemetery excavator – mini excavator Crjdpfxe Ah Nnfo Aktei * Manufacturer: Kiefer – Boki 4550 * 40 kW / 1896 cc * VW engine * Operating hours: only 8260 h * Year of manufacture: 1998 * Dimensions: 4900 mm long, 1210 mm wide, 3200 mm high * ALL-WHEEL STEERING * Road approval * Heater * Hydraulic connection for HAMMER OPERATION * Extension for grab arm * Support extension * etc. * All information is subject to change without notice * We reserve the right of prior sale * Please refer to our general terms and conditions

Year of construction: 2004, operating hours: 43,310 h, condition: excellent (used), functionality: fully functional, 2004 Illig RV 74b Three Station Thermoformer - Machines punch press toggle system has been completely replaced with new parts in August this year. Manufacturer Illig Model RV 74b Year 2004 Condition Good Approx hours 43310 Stations Three Delivery date Immediately Maximum forming area 704 x 514 mm Minimum forming area 400 x 250 mm Depth of draw 120/40 mm Max film width 760 mm Sheet thickness range 0.18 - 2 mm Operating pressure 2 bar Csdpfx Akj Ahw A Eetsri Max dry cycles / min 35 All details are subject to change and/or errors. All equipment is subject to availability and/or prior sale.

Condition: used, gearing type: automatic, lifting height: 30,000 mm, Magni RTH 6.30 SH Forestry Crane - Year of manufacture: 2021 - Operating hours: only 1,373 hours! KEY FEATURES: - EBERT Safety armored glass windshield against chain impacts and deadwood, with road approval! - Protective grille for the windshield - Enclosed boom - Boom wiper for the outriggers - LED headlights for boom and cab - Camera system (camera on the boom at the front, side, and rear on the counterweight) - Extended remote control with saw function and outrigger support - 40 km/h or 20 km/h - Vibration dampers - Support plates with holder EQUIPMENT - Maintenance-free wet disc brakes on front and rear axles - Comfort seat with weight adjustment and armrests - Spacious pressurized cab with air conditioning + heating - Operation via the clear 10-inch touch pad and navigation button - ROPS/FOPS cab with optimal all-round visibility - 360° continuous rotation - 12 V socket in the cab - Automatic leveling of the scissor supports - Attachment recognition - Leveling system on wheels - Lighting according to StVZO (German Road Traffic Licensing Regulations) - TÜV package + TÜV inspection - Customization of maneuvers - Fork carriage with forks 1,200 mm AREAS OF APPLICATION - Safe removal of trees in sections. - Special tree removal in urban areas or settlements. - Maintenance work along roads and routes. - Removal of problematic trees. - Tree removal on slopes and embankments - Optimal for use in municipal areas - Removal of storm damage Crjdpfxjyfqwio Aktsi - Traffic control and road safety Optional: - Westtech WOODCRACKER® CS 750 Smart (cutting diameter 75 cm) = Price: +20,000 € net. We are the official Magni telehandler sales and service partner, Westtech Woodcracker sales and service partner, JCB construction machinery sales and service partner, Mercedes-Benz service partner, Iveco service partner, and with 800 used vehicles, one of the largest commercial vehicle dealers in Germany. We supply you with the complete Westtech Woodcracker range! Upon request, we will provide you with a leasing or financing offer from Mercedes-Benz Bank. Further information can be found on our homepage. Errors and prior sale are subject to change! Power steering, cab, protective roof, rental possible = Further information = Year of manufacture: 2021 Operating hours: 1,373 Engine brand: Diesel Lifting capacity: 6,000 kg Please contact Tobias Ebert for further information.

Condition: used, For inquiries regarding the attachment, Mr. Herden is at your service (please call ). Atlas two-shell grapple with extension / grapple / year of manufacture: 2019 / in stock & immediately available Price: €3,990.00 net / €4,748.10 gross - Overall length (mm): 3,600 - Tare weight (kg): 814 - Shell width (mm): 600 - Opening width (mm): 1,400 - Capacity (liters): 350 You can find the exact technical dimensions in the attached images. We have a very large selection of various attachments in our warehouse, which are immediately available! Mr. Herden (Tel. ) will be happy to assist you. Upon request, we will also be happy to provide you with a financing offer. We are an official Westtech sales and service partner. We are an official OilQuick sales and service partner. We are an official Holp sales and service partner. We are an official Magni telehandler sales and service partner. We are an official DMS sales and service partner. We are an official Gierking GMT sales and service partner. We are an official Weber MT sales and service partner. We are an official Seppi M. sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. Errors and prior sale excepted! Internal No.: 517131 = Further information = Year of manufacture: 2019 Intended use: Construction Tare weight: 814 kg Cjdpfezffl Tjx Aktori Please contact Marius Herden for further information.

Condition: used, For inquiries regarding the construction equipment, Mr. Herden is available to assist you (please call ). Intermercato TG 22 S grapple / timber grapple / including a brand new rotator / including MS08 mounting / year of manufacture: 2021 / in stock & immediately available Price: €2,790.00 net / €3,320.10 gross - Weight: 112 kg - Cross-sectional area: 0.22 m² - Max. working pressure: 200 bar - Oil flow: 50 l/min - Closing force: 13.5 kN - Recommended lifting moment for timber loading crane: 4 tm - Max. load capacity: 2 t - Recommended excavator weight - cardan suspension: 4 t - Recommended excavator weight - rigid mounting: 3 t - Piece goods crane - Recommended lifting moment: 10 tm Mr. Herden ( ) will be happy to assist you. Upon request, we will also gladly provide you with a financing offer. We are an official DMS sales and service partner. We are an official Holp sales and service partner. We are an official OilQuick sales and service partner. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official Weber MT sales and service partner. We are an official Magni telescopic handler sales and service partner. We are an official Seppi M. sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. !!Errors and prior sale excepted!! Internal ID: 7190 Crsdpfx Akeznrugotsi = Further Information = Year of manufacture: 2021 Intended use: Construction Unladen weight: 112 kg Please contact Marius Herden for further information.

Condition: used, For inquiries regarding the attachment, please contact Mr. Herden at [phone number]. DMS SG18070 sorting grapple / Year of manufacture: 2023 / Demo unit / incl. rotator / incl. teeth (screwable) / in stock & immediately available Price: €14,990.00 net / €17,838.10 gross - Shell width: 700 mm - Volume: 384 L - Weight (without rotator): 728 kg - Rotator weight: 164 kg - Operating pressure: 320 bar - Closing force: 50 kN - Torque: 4,200 Nm - Opening width: 1,926 mm - Excavator class: 11 – 18 tons Optional: - MS10 adapter plate (currently installed): €2,786.00 net - MS21 adapter plate: €3,355.00 net We have a very large selection of various DMS products in our warehouse that are immediately available! Please contact us for this at [phone number] / [email address]. Upon request, we will also be happy to provide you with a financing offer. We are an official DMS sales and service partner. We are an official Westtech sales and service partner. We are an official Magni telehandler sales and service partner. We are an official Seppi M. sales and service partner. Cedpfx Aksznruastori We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We provide you with the complete DMS program! Errors and prior sale excepted! Internal No.: 00302 = Further information = Year of manufacture: 2023 Intended use: Construction Please contact Marius Herden for further information.

Condition: excellent (used), Year of construction: 2010, Liebherr GM10 Clamshell grab for 12–18 t Excavators for quick coupler - OilQuick OQ65 Year : 2010 Cutting Width: 600 mm Weight: Approx. 890 kg Suitable Machines: Excavators from 12–18 t CE Crodpsz Nxlyofx Aktji

Condition: used, For inquiries regarding the attachment, please contact Mr. Herden at [phone number]. Swivel grapple / Two-shell grapple / Grapple / incl. OQ65 mounting / in stock & immediately available Price: €11,890.00 net / €14,149.10 gross - Own weight (kg): 1,008 - Shell width (mm): 590 Features: Incl. OQ65 mounting Incl. hoses, see photos Incl. rotator The exact technical dimensions can be found in the attached images. We have a very large selection of various attachments in our warehouse, which are immediately available! Mr. Herden (Tel. [phone number]) will be happy to assist you. Upon request, we will also gladly provide you with a financing offer. We are an official Westtech sales and service partner. We are an official OilQuick sales and service partner. We are an official Holp sales and service partner. We are an official Magni telehandler sales and service partner. We are an official DMS sales and service partner. We are an official Gierking GMT sales and service partner. We are an official Weber MT sales and service partner. We are an official Seppi M. sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. Errors and prior sale excepted! Internal No.: 090909 = Further information = Intended use: Construction Crjdpoz Efnrjfx Aktoi Unladen weight: 1,008 kg Please contact Marius Herden for more information.

Condition: used, color: other, first registration: 01/2015, Year of construction: 2015 Price: On request = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. Csdez Sulzepfx Aktori When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: used, For inquiries regarding the attachment, please contact Mr. Herden (available by phone at ). Two-shell grapple with extension / Grapple / in stock & immediately available Price: €3,990.00 net / €4,748.10 gross - Overall length (mm): 3,600 - Weight (kg): 1,640 - Shell width (mm): 1,080 - Opening width (mm): 1,800 You can find the exact technical dimensions in the attached images. We have a very large selection of various attachments in our warehouse, which are immediately available! Mr. Herden (Tel. ) will be happy to assist you. Upon request, we will also gladly provide you with a financing offer. We are an official Westtech sales and service partner. We are an official OilQuick sales and service partner. We are an official Holp sales and service partner. We are an official Magni telescopic handler sales and service partner. We are an official DMS sales and service partner. We are an official Gierking GMT sales and service partner. We are an official Weber MT sales and service partner. We are an official Seppi M. sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. Crjdpjzffl Hsfx Aktei In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. Errors and prior sale are subject to change! Internal No.: 619003 = More information = Application: Construction Unladen weight: 1,640 kg Please contact Marius Herden for further information.

Condition: used, Year of construction: 2000, operating hours: 1 h, power: 206 kW (280.08 HP), next inspection (TÜV): 05/2027, Equipment: ABS, air conditioning, cabin, Unique, highly off-road capable LOF M.A.N. Agro special vehicle, single-tire all-wheel drive tipper truck 4x4, type L 90 with Hiab X-HiPro 122 E-3 loading crane with remote control and Meiller 3-way tipper body, Agro tires 445/65 R22.5, hydraulic rear axle steering, PTO drive at the rear, 3-axle differential locks, Euro 3 engine without AdBlue, leaf-sprung suspension, air conditioning, additional second hydrostatic drive, 2 x trailer coupling, second-hand with only 47,000 km. The tipper body and loading crane can be exchanged and removed. LOF tractor unit Long cab with bunk and 2 rear windows PTO drive at the rear Single Agro special tires 445/65 R 22.5 Air conditioning Wheelbase 3,600 mm Total weight 16,500 kg, total weight 18,000 kg possible Unladen weight 10,897 kg Payload 5,603 kg at a total weight of 16,500 kg Payload 7,103 kg at a total weight of 18,000 kg possible Engine Euro 3, D0836 LFL03, 6 cylinders with 280 hp (without AdBlue) All-wheel drive 4 x 4 All-wheel steering on both axles Front and rear axles can be steered individually or together Front-wheel drive can be engaged All-wheel longitudinal lock Differential lock in the front and rear axles Hydrostatic drive for infinitely adjustable speeds between 0-5 km/h Rear axle steerable with electronic/hydraulic steering system for extremely small turning radii Meiller 3-way tipper body (year of manufacture 2023), approx. 3.60 m x 2.30 m x 0.40 m high Remote control for the tipper body Headboard 0.70 m high Bed with lashing points Loading crane Hiab X-HiPro 122E-3 (year of manufacture 2019), foldable behind the cab Crane with 3 hydraulic extensions Lifting capacity at approx. 4.30 m / 2,560 kg // 8.10 m / 1,260 kg // 10.20 m / 980 kg according to the manufacturer Slew and grab control 2-point support with one pivoting support leg Crodpoz H Elmefx Aktji Remote control Floor control UVV crane valid until 03/2027 Gearbox ZF 16 S 109 mechanical Gearbox shift locking pneumatic Transfer gearbox VG1000/2 with off-road reduction Front and rear axles leaf-sprung Stabilizer for front and rear axles Front axle VA9-0950 driven, rear axle AP H9-1380AP Axle ratio i = 5.92 Front springs parabolic 7.5 t, rear springs trapezoid Trailer coupling ring spring with air pressure connections 3 hydraulic connections at the rear for auxiliary hydraulics Permissible total towing weight 30,000 kg ABS Engine brake Cruise control Fuel tank 300 liters, right Sun visor Work spotlights on the cab roof Roof hatch Electric window on the right Driver's comfort seat, air-sprung Co-driver's comfort seat, air-sprung Radio The tipper body and loading crane can be removed/exchange system German vehicle from the second owner Very good and well-maintained condition Service was completely carried out at 45,000 km. Sale exclusively to commercial businesses. Price NET plus 19% VAT. We will gladly provide you with attractive financing offers. All information without guarantee. Errors and prior sale reserved. Internal vehicle number: 2162

Condition: used, Year of construction: 2000, operating hours: 1 h, power: 206 kW (280.08 HP), next inspection (TÜV): 05/2027, Equipment: ABS, air conditioning, cabin, Unique, highly off-road capable LOF M.A.N. Agro special vehicle, single-tire all-wheel drive tipper truck 4x4, type L 90 with Hiab X-HiPro 122 E-3 loading crane with remote control and Meiller 3-way tipper body, Agro tires 445/65 R22.5, hydraulic rear axle steering, PTO drive at the rear, 3-axle differential locks, Euro 3 engine without AdBlue, leaf-sprung suspension, air conditioning, additional second hydrostatic drive, 2 x trailer coupling, second-hand with only 47,000 km. The tipper body and loading crane can be exchanged and removed. LOF tractor unit Long cab with bunk and 2 rear windows PTO drive at the rear Single Agro special tires 445/65 R 22.5 Air conditioning Wheelbase 3,600 mm Total weight 16,500 kg, total weight 18,000 kg possible Unladen weight 10,897 kg Payload 5,603 kg at a total weight of 16,500 kg Payload 7,103 kg at a total weight of 18,000 kg possible Engine Euro 3, D0836 LFL03, 6 cylinders with 280 hp (without AdBlue) All-wheel drive 4 x 4 All-wheel steering on both axles Front and rear axles can be steered individually or together Front-wheel drive can be engaged All-wheel longitudinal lock Differential lock in the front and rear axles Hydrostatic drive for infinitely adjustable speeds between 0-5 km/h Rear axle steerable with electronic/hydraulic steering system for extremely small turning radii Meiller 3-way tipper body (year of manufacture 2023), approx. 3.60 m x 2.30 m x 0.40 m high Remote control for the tipper body Headboard 0.70 m high Bed with lashing points Loading crane Hiab X-HiPro 122E-3 (year of manufacture 2019), foldable behind the cab Crane with 3 hydraulic extensions Lifting capacity at approx. 4.30 m / 2,560 kg // 8.10 m / 1,260 kg // 10.20 m / 980 kg according to the manufacturer Slew and grab control 2-point support with one pivoting support leg Remote control Floor control UVV crane valid until 03/2027 Gearbox ZF 16 S 109 mechanical Gearbox shift locking pneumatic Transfer gearbox VG1000/2 with off-road reduction Front and rear axles leaf-sprung Stabilizer for front and rear axles Front axle VA9-0950 driven, rear axle AP H9-1380AP Axle ratio i = 5.92 Front springs parabolic 7.5 t, rear springs trapezoid Trailer coupling ring spring with air pressure connections 3 hydraulic connections at the rear for auxiliary hydraulics Permissible total towing weight 30,000 kg ABS Engine brake Cruise control Fuel tank 300 liters, right Sun visor Work spotlights on the cab roof Roof hatch Electric window on the right Driver's comfort seat, air-sprung Co-driver's comfort seat, air-sprung Radio The tipper body and loading crane can be removed/exchange system Cedpfxjz H Elge Aktjri German vehicle from the second owner Very good and well-maintained condition Service was completely carried out at 45,000 km. Sale exclusively to commercial businesses. Price NET plus 19% VAT. We will gladly provide you with attractive financing offers. All information without guarantee. Errors and prior sale reserved. Internal vehicle number: 2162

Condition: used, For inquiries regarding the attachment, Mr. Herden (tel. ) will be happy to assist you. Kinshofer demolition grapples / grapples / MS21 / MS25 / incl. rotator / in stock & immediately available Price: €8,890.00 net / €10,579.10 - Shell width (mm): 1,150 - Capacity (liters): 800 - Weight (kg): 1,780 - Operating weight (t): 20 – 27 Equipment: - Incl. MS21 / MS25 mount - Incl. rotator - Incl. hydraulic hoses, see photos In our warehouse, we have a very large selection of various attachments that are immediately available! Mr. Herden (tel. ) will be happy to assist you. Upon request, we will also be happy to provide you with a financing offer. We are an official Magni sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp telescopic loader sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official Westtech sales and service partner. Cedpoznrrfjfx Akteri We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. Errors and prior sale excepted! = Further information = Intended use: Construction Unladen weight: 1,780 kg Please contact Marius Herden for further information.

Condition: used, functionality: fully functional, overall weight: 2,000 kg, maximum load weight: 9,000 kg, digging bucket width: 1,300 mm, Equipment: gripper hydraulics, hydraulics, We offer this used Verachtert VRG-40 sorting grapple, demolition grapple, stone grapple, grab bucket, and timber grapple. Type: VRG-40 Serial number: 104113 Own weight: 2000 kg Capacity: 9000 kg Machine type: For Verachtert quick coupler CW30/40 with 56cm between the mounting hooks. (Popular quick coupler for many CAT excavators; Verachtert is part of the Caterpillar Group.) Headplate Verachtert CW 40 Excavator size 20-40 tons Width 1300mm, making it a truly large sorting grapple Hydraulic function: 1 Open-Close, 2 Rotation Maximum working pressure (Open-Close): 350 bar Crjdpfx Ajzuz Atsktoi Maximum flow (Open-Close): 85 l/min Maximum working pressure (Rotation): 140 bar Maximum flow (Rotation): 40 l/min Volume: 0.9 m³ Pickup in 96231 Bad Staffelstein / Upper Franconia / Northern Bavaria. Delivery can be arranged, with reimbursement of expenses. If you have any questions or need more information, please send us a message or call us. We also have a package of Verachtert excavator buckets and a power tilt with a hydraulic Verachtert quick coupler for sale. Check out our other offers!

Condition: used, For inquiries regarding the attachment, please contact Mr. Herden (by phone at [phone number]). DMS GL6040P Tilting grapple / Year of manufacture: 2022 / Show model (unused!) / In stock & immediately available Price: €3,990.00 net / €4,748.10 gross Crodsznrq Iepfx Aktsi - Like new condition - 3 units available - Adapter plate type Lehnhoff MS03 - Shell width: 400mm - Volume: 70L - Excavator class 3.5 tons to 6.0 tons We have many other DMS grapples in stock and available for immediate delivery! Please contact us at [phone number] / [email address] for more information. Upon request, we will also be happy to provide you with a financing offer. We are an official DMS sales and service partner. We are an official Holp sales and service partner. We are an official OilQuick sales and service partner. We are an official Westtech sales and service partner. We are an official Magni telehandler sales and service partner. We are an official Seppi M. sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete DMS range for you! Errors and prior sale excepted! = Further information = Year of manufacture: 2022 Intended use: Construction Contact Marius Herden for further information.

Condition: excellent (used), power: 265 kW (360.30 HP), first registration: 02/2019, fuel type: diesel, axle configuration: 6x4, wheelbase: 5,250 mm, fuel: diesel, fuel tank capacity: 500 l, brakes: engine braking, color: blue, driver cabin: day cab, gearing type: automatic, emission class: euro6, number of seats: 2, total length: 8,370 mm, total width: 2,550 mm, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 11,500 kg, permissible axle load (axle 3): 7,500 kg, Equipment: ABS, AdBlue, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, power assisted steering, power mirror, trailer coupling, - Brake booster - Differential lock - High beam headlights - Low noise - Speed limiter - Cab - Air suspension - Air-suspended seats - Air horn - Rotating beacon - Rear view camera - Sun visor - Power take-off (PTO) General Information Year of construction: 2019 Registration number: 25-BLZ-3 Technical Information Number of cylinders: 6 Engine displacement: 10,518 cc Axle Configuration Maximum front axle load: 9000 kg Rear axle 1: Max. axle load: 11500 kg Rear axle 2: Lift axle; Max. axle load: 7500 kg; Steerable Weights Unladen weight: 15,975 kg Payload: 12,025 kg GVW: 28,000 kg Functional Crane: PALFINGER-EPSILON Q 170 EASYFOLD, behind the cab Body manufacturer: KIPPER WITH FLAPS AND REAR DOORS Maintenance, History and Condition APK (Technical Inspection): valid until 02/2027 Technical condition: very good Optical condition: very good MAN TGS 26.360 6x4H-4 BL TIPPER + PALFINGER EPSILON Q170 EASYFOLD + BAKKER GRAB Very nice and fully equipped MAN TGS 26.360 6x4H-4 BL with a tipper body and a Palfinger Epsilon Q170 EasyFold loading crane mounted behind the cab, including a Bakker grab. An extremely versatile and robust combination, ideal for earthmoving, road construction, recycling, gardening and landscaping, municipal work, as well as the transport and handling of various materials. The vehicle comes from its first owner, is in very good condition and has only 190,068 km on the odometer. VEHICLE DATA * Manufacturer: MAN * Type: TGS 26.360 6x4H-4 BL * Axle configuration: 6x4H-4 * Registration number: 25-BLZ-3 * First registration: 20.02.2019 * Mileage: 190,068 km * Engine power: 265 kW / 361 hp * Displacement: 10,518 cm³ * Fuel: Diesel * Emission standard: Euro 6 * Weight variant: 28,000 kg * Automatic transmission * Day cab * Air conditioning * Multimedia/Audio system * DIN mounting plate at the front of the vehicle * Rotating beacons on the cab * Stainless steel toolboxes * First owner * Dutch vehicle * Valid technical inspection / APK until 02/2027 TIPPER BODY Cedpfx Akozzn Hfetsri The vehicle is equipped with a robust tipper body for professional and intensive use. Equipment includes: * Hydraulic tipping function * Aluminum cover flaps * Rear doors * Hydraulically operated side board * Robust and professional construction * Ideal for bulk goods, sand, soil, gravel, construction debris, green waste and other materials The hydraulic side board enables quick and efficient loading and unloading, making this combination particularly versatile. PALFINGER EPSILON LOADING CRANE Directly behind the cab there is: PALFINGER EPSILON Q170 EASYFOLD The Epsilon Q170 is a robust and powerful loading crane, designed for intensive professional loading and handling work. The crane is equipped with, among other things: * Palfinger Epsilon Q170 * EasyFold system * Mounting directly behind the cab...

Condition: used, functionality: fully functional, Year of construction: 2010, Equipment: hammer hydraulics, Montabert hydraulic breaker, type SC 50, for excavator carrier machines 8 - 14 tons, with hydraulic hoses and 1 chisel Asking price: €3,800.00 Clamshell grab: Type: KZS1450.5S, lifting capacity 4 tons. Serial number: A3103, weight: 585 kg. Shell width: 50 cm with bolt-on teeth, hydraulically rotatable For excavator carrier machines 8 - 14 tons. Cjdpfox Ur Hfox Aktsri Asking price: €2,250.00

Condition: excellent (used), Mechanical grab for concrete blocks - I have several grabs available, ranging in size from 120 cm to 250 cm. For sale: a mechanical grab designed for handling concrete blocks, paving stones, curbs, and other prefabricated elements. Robust steel construction with a chain-based mechanism. Mounting bracket for construction machinery (excavator, truck-mounted crane, forklift). Crjdez Sk T Ajpfx Aktsi

Condition: new, color: black, !!!!! SPECIAL OFFERS !!!!! ALL ITEMS AVAILABLE IMMEDIATELY! KINSHOFER Clamshell Bucket 604HPX 250 liters (50cm), incl. Rotator KM 04 S69-30 with pin connection KINSHOFER Clamshell Bucket 604HPX 325 liters (60cm), incl. Rotator KM 04 S69-30 with pin connection KINSHOFER Stone Stacking Grab KM332V 1100C IN STOCK – AVAILABLE IMMEDIATELY! KINSHOFER KM505 Quick Coupler, also Rotating Load Hook Incoming: KINSHOFER Crane Forks Descriptions: KINSHOFER Clamshell Bucket 604HPX 250/325L Complete Package The universal two-shell grab KM 604HPX with HPXdrive Standard is ideal for daily use for digging and loading with a loader crane. The advantages of the revolutionary HPXdrive technology make it a reliable and user-friendly attachment. Available capacities: 250L or 325L * Bolt-on teeth * HPXdrive Standard * Check and pressure relief valve * Closing force (19 kN at 26 MPa operating pressure) * Color: Black KINSHOFER Rotator KM04S69-30 with pin connection The applied "Gerotor" principle allows for very compact and effective rotators. Users particularly appreciate the precise start and stop behavior. In detail, this means: Grabs will not veer off during digging, they stop precisely, even under maximum load, and counter-steering when moving long loads is no longer necessary. * Up to 4,500 kg lifting capacity Credpfx Akoylumhstsi * Motor head made of steel * Max. operating pressure for rotation: 370 bar * Max. oil flow for rotation: 40 l/min * Max. oil flow through rotation: 75 l/min * Connections: M18 x 1.5 KINSHOFER Stone Stacking Grab KM332-1100 Complete Package The technically refined stone stacking grab KM 332 is versatile for use with palletized and non-palletized building materials. Fixed or adjustable immersion depth with hydraulically operated, parallel opening and closing arms. Versatile application with opening ranges from 400 mm to 1400 mm, e.g., for loading individual concrete elements such as curbstones to entire brick packs. The adjustable immersion depth makes the KM 332V ideal for loads with varying heights. Synchronization of the gripping arms is achieved through two hydraulic cylinders connected via a differential circuit. Safety is ensured by an overpressure valve in the hydraulic system, which protects against overloading. A check valve prevents the load from being released even in case of a pressure drop in the carrier machine. Durability is ensured through generously dimensioned bearings, an integrated grease reservoir, automatic wear compensation for the main bearing, and a spherical central bearing for the cylinders. KINSHOFER Rotator KM04S69-30 with pin connection. = Further Information = Damage: none Price: Upon request VAT/Margin Scheme: VAT not deductible (margin scheme)

Condition: used, mileage: 78,841 km, power: 110 kW (149.56 HP), first registration: 02/2018, fuel type: diesel, overall weight: 7,490 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space volume: 3 m³, loading space length: 3,400 mm, loading space width: 2,300 mm, loading space height: 350 mm, Year of construction: 2018, Equipment: ABS, crane, soot filter, * FUSO 7 C 15 Tipper MEILLER 3-way with FRONT CRANE FASSI F40.A.023 specially equipped for TREE CARE including grab attachment Codpfxjyulmws Aktjri * Hydraulic extension max. 7.85 m, lifting capacity 415 kg * RADIO REMOTE CONTROL for crane * Payload approx. 2,980 kg * Vehicle No. for customer inquiries: 4568 * Crane * EBS * Trailer coupling * Manual gearbox * Particle filter * Electric windows * Anti-lock braking system (ABS) * Power steering * Steel rims * Driver airbag * Limited slip differential lock * 3-way tipper, 3400x2300x400mm, single cab, crane * Driver comfort suspension seat, horizontal suspension * Transmission PTO, 200 Nm, for hydraulic pump * Manual throttle for engine speed * Domestic (Germany) * Ball head trailer coupling + 12V electrical kit (vehicle voltage 12V) * Heated exterior mirrors * Medium mirror bracket * Lane keeping assistant * Environmental badge (green) * Three-seater * Full service history * Airbag * Wheelbase 3,400 mm * 2/3 doors No liability for printing and typing errors Sale exclusively to business customers Errors and interim sale excepted; changes, interim sale, and errors expressly reserved. The description serves to identify the vehicle and does not constitute a warranty in the legal sense. The description in the purchase contract is binding. * TOP SERVICE + QUALITY * We will be happy to provide a LEASING-FINANCING-INSTALLMENT PURCHASE offer * Warranty insurance available on request from the insurer * TÜV / UVV LBW / Tachograph inspection and OBU device installation possible by our local partners * Customs license plate for 30 days All export customs documents possible upon individual request * Toll booking for Toll-Collect available in-house * Free transfer from Stuttgart airport or Metzingen (Württ) train station * ARRIVAL TRAIN STATION: 72555 METZINGEN/WÜRTT. * FOR ENGLISH * Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas WHATSAPP Number * * ---- Visit us on our website at * over 200 vehicles always in stock

Condition: used, For enquiries about the attachment, Mr. Herden will be happy to assist you (by phone at ...). Magni Rotating Work Basket / Tree Maintenance Basket / 250 kg / Suitable for RTH & TH Series / NEW Price: €6,490.00 net / €7,723.10 gross - Max. load capacity: 250 kg - Width: 670 mm - Length: 1,400 mm - Rotation range: +/- 90° - Max. occupants: 2 - Automatic attachment recognition: yes - Rotating work basket, rotation range +/- 90° - Galvanised, reinforced steel construction Cjdpfxjyxafqo Aktjri - Non-slip floor for safe working at height - Remote control is required for use with the work basket and must be installed on the machine This attachment is suitable for the RTH and TH series. Product code: ATT-01-003 We have many more Magni attachments available in our stock for immediate delivery! Mr. Herden (phone ...) is happy to assist you. We are also happy to provide you with a financing offer upon request. We are an official Magni telehandler sales and service partner. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official JCB construction equipment sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used commercial vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. We supply you with the complete Magni range! Errors and prior sale excepted! = More information = New: Yes Application: Construction Please contact Marius Herden for further information.

Condition: used, operating hours: 12,171 h, total width: 2,300 mm, total height: 2,400 mm, total length: 9,000 mm, Year of manufacture: 1996 Colour: Grey Empty weight: 10.000 kg BOERE sanding line 'Compact' Elite Crsdpfxjwnh Eqo Aktji Year of construction 1996 (CE) 12171 Operating hours Maximum height 150 mm Maximum width 1300 mm Elite BKKS 1300 First generator 45kW engine Second generator 30kW engine Third generator 18.5kW engine Voltage 380V, 183Amp Elite TKKS 1100 First generator 45kW engine Second generator 30kW engine Third generator 18.5kW engine Voltage 380V, 172Amp Revised by Boere in 2019 - Year: 1996 - Documentation available: Yes - CE marking present: Yes - Bottom sander: - Serial number: 98015305 - Operating hours: 12171 - Max. working width [mm]: 1300 - Max. working height [mm]: 150 - Sanding belt length [mm]: 1900 - Sanding belt width [mm]: 1310 - Motor power first unit [kW]: 45 - Motor power second unit [kW]: 30 - Motor power third unit [kW]: 18.5 - Feed motor [kW]: 2.2 - Contact roller material: Steel - Number of contact rollers [pcs.]: 2 - Number of combi units [pcs.]: 1 - Number of steel rollers [pcs.]: 2 - Number of motors [pcs.]: 3 - Belt blow-off system present: Yes - Brush present: Yes - Sanding pad present: Yes - Segments present: Yes - Top sander: - Max. working width [mm]: 1300 - Max. working height [mm]: 150 - Sanding belt length [mm]: 1900 - Sanding belt width [mm]: 1310 - Motor power first unit [kW]: 45 - Motor power second unit [kW]: 30 - Motor power third unit [kW]: 18.5 - Feed motor [kW]: 2.2 - Number of contact rollers [pcs.]: 2 - Contact roller material: Steel - Number of combi units [pcs.]: 1 - Number of steel rollers [pcs.]: 2 - Number of motors [pcs.]: 3 - Belt blow-off system present: Yes - Structuring brush present: No - Brush present: Yes - Sanding pad present: Yes - Segments present: Yes - Voltage [V]: 380 - Current consumption [A]: 172 - Transport dimensions: 9000mm x 2300mm x 2400mm (l x w x h) - Transport weight [kg]: 10000kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Forklift attachment – drum grabber Suitable for 2 x 200-liter steel drum/steel lid drums Crsdexbq Irjpfx Aktji Description: Secure grip, even on uneven surfaces Stable, welded steel construction Forklift attachment module with a robust powder coating in blue (RAL 5010) Quick and easy mounting on the forklift Automatic locking when lifting the drum Automatic release of the clamp when lowering Safe handling of steel drum and retaining ring drums Height-adjustable Technical data Surface: Hot-dip galvanized Application: Lifting/transport of steel drums External width [mm] 1050 External depth [mm] 1080 External height [mm] 975 Fork pocket spacing [mm] 730 Fork pocket W x H [mm] 150 x 55 Total load capacity [kg] 700 Material: Steel Approval / Certificate description 1 2006/42 DECLARATION OF CONFORMITY Weight [kg] 110 You can find more new and used items in our shop! International shipping costs available upon request!

Condition: new, For inquiries regarding the attachment, Mr. Herden will be pleased to assist you (by phone at ...). Kinshofer Clamshell Bucket / Two-Shell Grab / Grab / KM 604 - 350 / NEW Price: €5,300.00 net / €6,307.00 gross Capacity (liters): 350 Build width E (mm): 650 Max. opening (mm): 1,390 Crodsyi Rz Njpfx Aktji Number of teeth: 5 Weight (kg): 240 Closing force (kN): 20 Lifting capacity (kg): 3,000 - Incl. bolt-on excavator teeth - Incl. KM 04 F rotator Operating pressure at flow rate: 26 – 32 MPa (260 – 320 bar) at 40 – max. 75 l/min The KM 604 is a practical two-shell grab for everyday use – robust, functional, and cost-effective. - Maximum dumping height thanks to compact design with horizontal cylinder layout. - Long service life due to use of cutting edge material with 500 HB Brinell hardness and generously dimensioned bearings. - Synchronous shell movement ensured by a sturdy, forged equaliser linkage. - Bolt-on excavator teeth included in delivery. - Excellent digging performance thanks to high closing force (20 kN at 26 MPa operating pressure). We have a very large selection of various attachments in stock and available for immediate delivery! Mr. Herden (phone: ...) will be happy to assist you. Financing options are available upon request. We are an official dealer and service partner for: Magni Telehandlers Westtech Gierking GMT OilQuick Weber MT Holp DMS Seppi M. JCB Construction Machinery Mercedes-Benz Iveco With 800 used vehicles in stock, we are also one of the largest commercial vehicle dealers in Germany. Errors and prior sale excepted! = Further information = Application: Construction Please contact Marius Herden for further details.