Used conveyors & conveying systems for sale (183)

Condition: used, machine/vehicle number: 008493, Introduction system: with grippers Nsdoz S T Uujpfx Ai Aewn

Condition: used, machine/vehicle number: 007668, Max. panel width: 1200 mm Nwsdpfsu Huwcsx Ai Aon Max. panel length: 2400 mm Movement system: suction cups.

Condition: used, machine/vehicle number: 007669, Max. panel width: 1200 mm Max. panel length: 2400 mm Movement system: collet Nwsdpsu Huv Sefx Ai Asn

Year of construction: 2026, condition: like new (used), Walking floor container, 70 m³ Hydraulic walking floor Hydraulic roof Njdpfsztziqsx Ai Aown Optional: Discharge and metering screw Cell wheel lock Hydraulic unit with remote control for hydraulic roof Conveyor screws Scraper chain conveyor For inquiries, please provide detailed information: - What is required? - What is the desired conveying capacity?

Condition: used, Belt Conveyor KJ Maskinfabriken KA69B-550B Belt conveyor with a stainless steel frame, made in Denmark (KJ Maskinfabriken A/S, Esbjerg). Side guides on both sides. Njds Afwwvjpfx Ai Aswn Technical data: Manufacturer: KJ Maskinfabriken A/S (Denmark) Type: KA69B-550B Year: 1983 Length: ~4.3 m Frame: stainless steel Drive: Interroll drum motor Emergency stop switch: Schneider Electric Connection: 400 V plug

Condition: used, Belt conveyor with a modular plastic belt and a stainless steel frame. High side guides on both sides keep material on the belt. Technical data: Length: ~5.5 m Frame: stainless steel Nwedpfj Afu Uzox Ai Asn Belt: modular plastic belt Drive: Bauer gear motor (Germany), 0.5 HP, 220/380 V, 50 Hz

Year of construction: 2026, condition: like new (used), Scraper chain conveyor Nedpeztzgcjfx Ai Aswn robust and wear-resistant design optional: bar magnet separator please specify when requesting a quote: conveyor capacity m³/h dimensions

Year of construction: 1986, condition: used, functionality: fully functional, For sale is a complete silo discharge and conveying screw system from a wood processing production facility. The system was in regular operation until production was halted approximately 6 months ago and was subsequently decommissioned. The complete package includes the mechanical silo discharge system, several conveying screws or transport lines, various gear and electric motors, the complete associated electrical control system in the control cabinet, as well as an additional new or unused spare motor. The system was used for discharging and further conveying wood chips or similar bulk material from the silo towards the heating system. Scope of delivery The offered complete package includes, among other things: - complete mechanical silo discharge system - several conveying screws / tubular screws - existing transport and conveying lines - several gear motors and electric motors - Bonfiglioli gearboxes - SEW-EURODRIVE drive technology - NORD gearbox technology - ASEA, ICME and Dietz electric motors - various connection, transition and discharge components - complete control cabinet with control and switching components The complete existing control cabinet is part of the offer. This offer includes not only individual conveying equipment but a comprehensive, cohesive system and spare parts package including the existing control system. Drive technology Various industrial motor and gearbox components from well-known manufacturers are installed. Among others: Bonfiglioli Riduttori Gearbox type MVF 130/2R, 4.00 HP, gear ratio i = 1/35. ASEA Three-phase motor, 0.55 kW, 930 min⁻¹, 380–420 V, protection class IP54. SEW-EURODRIVE Industrial gear motor, 0.55 kW, approx. 1,400/33 min⁻¹. NORD Industrial gearbox, type SK 30F-EC80, gear ratio i = 157.20. ICME Ravenna Three-phase motor, 0.55 kW, approx. 920 min⁻¹, protection class IP55. Dietz-motoren Three-phase motor, 0.4 kW, 2,760 min⁻¹, 220/380 V. Further technical specifications and photos of the existing nameplates can be provided upon request. Condition The used components are in a condition appropriate for their age and use. Signs of wear, dust deposits and some superficial corrosion are present. The system is suitable both for possible further use or adaptation to an existing silo system and as a comprehensive spare parts and components package for silo, heating and conveying technology. In particular, the various gear motors, gearboxes, screw components, the complete electrical control system and the additional new spare motor make the complete package interesting for operators of existing older systems. Inspection / Dismantling The system is still located at the previous production site and can be inspected by appointment. Location: 3608 Thun, Switzerland Availability: immediately Dismantling can begin immediately - must be completed by July 31, 2027. Nwedpfsz Iuikex Ai Ajn Dismantling, removal, loading and transport will be carried out entirely by the buyer at his expense and responsibility. Sale of the complete system in its existing condition, as inspected. Subject to prior sale. Sale with exclusion of guarantee and warranty. Selling price: 4,500.00 EUR Price net, any applicable statutory taxes and duties. Export, customs clearance and import duties are the responsibility of the buyer.

Condition: used, Plate lifting manipulator Lifting capacity: 250 kg Base height: 350 cm Arm length: 558 cm 4 suction cups Used, in good condition. Nsdpfx Ais Adqmwo Aewn

Condition: excellent (used), Year of construction: 1997, operating hours: 123 h, functionality: fully functional, Application: Fuel supply for wood chip biomass boilers 1. System description The Mawera SST, a two-beam, hydraulically operated discharge system, is used for the uniform and continuous discharge of wood chips from a rectangular storage silo. The sliders or scrapers move the material in alternating strokes to feed the boiler. Nwsdpfx As Aba T Usi Ajn 2. Main dimensions Silo length: • Version with 12 sliders: 15.00 m Internal silo width: 4.24 m Scraper blade width: 900 mm Scraper blade depth: 250 mm Scraper blade height: 70 mm 3. Drive and operation Hydraulic drive with two cylinders Thrust force: 160 kN Tensile force: 80 kN Automatic, alternating stroke control synchronized with the boiler control 4. Connections Material discharge into a central collection pit Further transport via screw or chain conveyors Boiler connection: DN 315 5. Installation requirements Concrete floor, MONO-FINISH quality, tolerance ±5 mm Base plates, openings, and covers to be provided by the customer Maintenance access to the hydraulic unit must be ensured 6. Advantages Reliable operation with varying wood chip quality Consistent fuel supply for 24/7 boiler operation Low maintenance requirements Already disassembled, will be loaded onto a truck. The support beams can be disassembled into 6.3 m segments. The width during transport is not 4.24 m, as the beams can be removed side by side. The scrapers are removable. Transport is possible with a standard truck. Already disassembled.

Year of construction: 2007, condition: used, functionality: fully functional, machine/vehicle number: 99376, Loading of a Wienner C system from two Magnum-type loading stations with automatic unloading of sleepers/pallets to two Formetal palletizers. Power supply: 3-phase, 400V, 42.6A (25.1 kW), and 6 atm. Documentation is available. Nwjdpfxjzytm Io Ai Aon Lower-resolution photos of the assembled machine are available.

Year of construction: 2007, condition: used, Forklift Manufacturer: Jungheinrich Model: EFG 540 Year of manufacture: 2007 Technical specifications - Overhauled by Jungheinrich in 2017 - Total weight: 6600 kg - Overall length: 2830 mm - Overall height: 1350 mm - Ground clearance: 110 mm Nwodpfx As Afxmuoi Aon - Lifting height: 4,450 mm - Load center: 500 mm - Free lift: 2,250 mm - Mast height: 2,215 mm - Tire condition: 90 % - Battery capacity: 840 Ah - Battery voltage: 80 V - Remaining battery capacity: 70 % - Battery weight: 2,076 kg - Fork length: 2000 mm and 1200 mm - Fork carrier width: 1270 mm - Fork thickness: 50 mm - Fork width: 125 mm - Power: 18 kW - Duplex mast - Turning radius (inside): 2450 mm - Load capacity: 4000 kg - Rated load at 500 mm load center: 4,000 kg - Rated load at 600 mm load center: 3,640 kg - Rated load at 700 mm load center: 3,330 kg - Total operating hours: 8,157 h - Operating hours since overhaul: 268 h Note: The technical data and descriptions are copies of the original order confirmation. This information is provided for informational purposes only and is not binding.

Condition: used, Kadikis AV Belt Conveyors The conveyors are suitable for material handling, packaging, woodworking and other production lines. Technical specifications: Quantity: 2 pcs Conveyor length: 2000 mm Belt width: 150 mm Drive motor power: 0.75 kW Frequency inverter: Yaskawa V1000 Power supply: 230 V, single-phase Protection: C10 circuit breaker Nods Ad Ir Dspfx Ai Ajwn Controls: on/off switch, emergency stop button, speed adjustment with a potentiometer Construction: heavy-duty steel frame with adjustable feet Condition: lightly used, in working order Advantages: Adjustable belt speed Runs on a standard 230 V supply Compact, with a small footprint Robust and reliable construction

Year of construction: 2005, condition: used, Year of manufacture: 2005 Colour: Grey Empty weight: 900 kg Dimensions (LxBxH): 330 x 215 x 260 cm - Year: 2005 - Documentation available: No - CE certificate present: No - Automatic output system present: Yes - Feed speed: Variable - Lift table present: Yes - Max. output length [mm]: 3100 - Max. output width [mm]: 220 - Automatic feed system present: Yes - Max. input length [mm]: 3100 - Max. input width [mm]: 220 - Voltage [V]: 400 - Transport dimensions: 3300mm x 2150mm x 2600mm (l x w x h) Nedpozlc Niefx Ai Aown - Transport weight [kg]: 900kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Year of construction: 2023, condition: new, functionality: fully functional, machine/vehicle number: 2230832-269, Barbaric RTS 02 Professional reverse transfer system with destacking, year of manufacture 2023. Workpiece recirculation with 0 - 90 - 180 degree rotation, part measurement, destacking function including stack construction and manual mode for oversized panels. Composed of a removal station RX U4 B2200, conveyor belt L9000 B800, delivery station Comfort, movable table, dual function, steplessly adjustable conveyor belt, support rollers with double track, portal RTS 6100, safety fences and 2 safety light curtains. Largest part 2800 x 1300 mm, smallest 300 x 80 mm, maximum 60 kg. Pick-up with suction cups, up to 12 cycles per minute, transfer speed up to 120 m/min, stacking height 800 mm. Connection 400 V / 50 Hz, 20 A and compressed air 0.6 MPa. Nsdpfjz Ngg Ejx Ai Aown

Condition: good (used), Year of construction: 2003, Dry rack loading system for profiles Manufacturer: Makor Nodpfx Aoz Nky Nei Aewn Type: ACA Year of manufacture: 2003 Automatic rack loader at the end of the line for loading dry racks with painted profiles and strips Typical applications: Profile painting, strip production, coating lines for baseboards, decorative strips, and window strips Design: 4 positioning arms for short and long profiles up to approx. 5000 mm (arm spacing approx. 0 - 1600 - 2120 - 2550 mm) Paternoster rack width approx. 175 mm Basic concept: - Automatic transfer of the coated profiles from the end of the line to the dry racks - 4 positioning arms for different profile lengths - Can be used as the final stage of a profile coating line / board coating machine / strip spraying machine

Year of construction: 2008, condition: used, Technical specifications: Nwedpe Aba Uxefx Ai Aen - Manufacturer: Venjakob - Type: H - Working width: 1,300 mm - Overall width: 1,510 mm - Length: 9,250 mm - Feed speed adjustable via frequency converter - Frequency converter not included in the scope of supply - Height: 900 + / - 50 mm - Motor power: 1.5 kW - Motor: ATEX compliant - Belt control, pneumatic - Max. load: 70 kg/m - Color: RAL 7035 light gray - Voltage fluctuations: +/- 5% - Location: in the warehouse

Condition: used, machine/vehicle number: 005981, Max. panel width: 1200 mm Nwode Aax Iujpfx Ai Ajn Max. panel length: 2500 mm 90 degree transfer system: yes

Condition: ready for operation (used), functionality: fully functional, For sale is a wood chipping line (chipper canter line) with the following components: - Log infeed - Step conveyor for logs, manufacturer Saenger + Massierer - Singulator Nwodpszrfkvofx Ai Ajn - Log conveyor - Centering infeed with log turner, manufacturer Kockums, type 447-6 C, serial number 70984 - Chipper centering device, manufacturer Kockums, type 240-12 D - Outfeed conveyor with lateral discharge option - Control cabinet and control system (Siemens Simatic Panel) for the entire line - Max. log diameter: 50 cm The line is sold excluding any warranty and liability for defects.

Condition: used, machine/vehicle number: 007723, Max. panel width: 900 mm Nodpjy Nkyyofx Ai Ajwn Length of conveyor: 11000 mm Introduction system: with pushers

Condition: used, machine/vehicle number: 007802, Max. panel width: 800 mm Max. panel length: 2000 mm Length of conveyor: 8320 mm Njdpfjxn Nf Nsx Ai Aown Introduction system: with grippers

Condition: used, - Powered roller conveyor - Approx. 6000 mm long - 490 mm roller width - Approx. 440 mm roller pitch - 114 mm roller diameter - 900 mm working height - 0.75 kW drive motor Nsdpfxswy Ry Ue Ai Aewn

Condition: used, Year of construction: 2025, functionality: fully functional, Double scissor lift table – Kraus brand Nwedpjz Dkfmjfx Ai Ajn Length: 2500 mm Width: 2400 mm Maximum lifting height: 3500 mm Maximum lifting capacity: 1000 kg Year of manufacture: 2025

Year of construction: 2021, condition: excellent (used), functionality: fully functional, Barbaric Labeling LPS labeling stations, year of manufacture 2021 each equipped with a Godex EZ235I label printer fixed table, suitable for automated warehouses or nesting CNC machines Nsdpfjxy Ad Asx Ai Aswn

Year of construction: 2018, condition: good (used), quantity 1 STK 0 210 mm 0 3000 mm Magnetic plate conveyor (for chips / small metal parts). > CE marking present > Fill with oil before commissioning Nwsdpfxjzwxx Rs Ai Aon > Gearbox output — flanged drive, cylindrical shaft