Control unit

Kraus

Condition: good (used), Year of construction: 2002, overall weight: 3,200 kg, Krauss Maffei 80-220 C1 injection molding machine 80 tons Pjdpfx Aez Dquzefujgt Year 2002

Condition: used, Winkworth PV1000 Jacketed Stainless Steel Tank Capacity 1000 Lts Complete with Winkworth mixer and ancillary equipment Podowq Sdijpfx Afujgt

Condition: good (used), Control load switches, RCBOs, motor protection switches, reversing switches -Type: CG8 D-V226-602 FS1 -without: gearshift knob -Price: per piece -Number: 19 switches available -Weight: 0.6 kg Podpeb A I Siofx Afusgt

Year of construction: 2005, condition: excellent (used), Manufacturer: Kraus Type: RBA 89 Year of manufacture: 2005 Load capacity: max. 1500 kg/pallet Roller width: 1380mm Track width: 1450mm Roller diameter: 100mm Axle distance between rollers: 120mm Total length: 1500mm Power: 0.75kW / 28 U/min Speed: 21 m/min Pgedpfx Aonxkbpjfust Optionally with legs.

Condition: new, Year of construction: 2024, functionality: fully functional, nominal power: 90 kW (122.37 HP), rotational speed (max.): 5,760 rpm, rotational speed (min.): 1,592 rpm, total height: 3,437 mm, total length: 3,275 mm, total width: 2,500 mm, type of cooling: air, compressed air connection: 6 bar, Equipment: rotational speed infinitely variable, The impact mills of the REKORD 212-630 series in the welded housing design are robust universal mills for demanding industrial applications in continuous operation. ● Size: 630 mm (nominal rotor diameter) ● Mill housing: Heavy-duty welded stainless steel housing, pressure surge resistant up to 10 bar (AISI316L), with product-contacting surface finish Ra ≤ 1.6 μm for easy cleaning, equipped with a pivoting door and safety interlock type HAAKE (key transfer system); monitoring of housing and bearing temperature, vibration monitoring ● Mill inlet: JACOB pipe; DN 150 mm ● Mill outlet: Ground material and air discharge downward into a suction hopper, optimized for connection to the conveying line to the total separator ● Mill drive: Belt drive, three-phase motor, energy efficiency class IE3 (manufacturer SIEMENS), 90 kW, 3~ 400 V, IP55; suitable for operation with frequency inverter ● Sealing materials: Silicone; PTFE, sealing material conforms to EU and FDA food hygiene standards ● Grinding elements: Pin rotor: 4 pin rows, pin Ø 7 mm (wear-reduced); Pin stator: 3 pin rows without external pin circle, pin Ø 7 mm ● Bearings: Designed for toughest operational demands in continuous industrial service, heavy-duty bearing housings with temperature and vibration monitoring (early detection of potential bearing failure and avoidance of hot surfaces) ● Inert gas supply/monitoring for shaft seal on product chamber side ● Run monitoring to detect operating faults ● Machine frame: The complete unit – mill, drive with motor, tensioning rails, belt drive, and belt guard – is installed ready for use on a sturdy machine frame with height-adjustable machine feet Main components of the offered system include: ● Product feed/transfer from customer’s upstream process and transfer to a rotary valve (certified ATEX protection system); ● Industrial pin mill type REKORD 630-SSt with welded housing and ground surfaces; ● Product separator with discharge rotary valve (certified ATEX protection system); ● Pneumatic conveying line with air inlet/outlet, including suction blower; ● WITHOUT control system, without frequency inverter Podpex Ac Rbefx Afuegt

Condition: like new (used), Year of construction: 2017, Manufacturer: Kraus Year of manufacture: 2017 board length: 1600 Pgedjnr Hfyjpfx Afujt board width: 1400 Roller diameter: 100 mm, material: steel. Axle distance between rollers: 120 mm Load capacity: 2000 kg Lifting height: 1700mm Without hydraulic power supply unit! Chain drive, with gear electric motor. 1.1kW, 400V, 50Hz

Year of construction: 1993, condition: good (used), motorised transport table with rollers and. var. speed dimensions L x W x H = 2950 x 1300 x 900 mm Pgodpfx Aegvvn Eefuot feed speed var. height adjustable +/- 15 cm max. weight load 50 kg/ m Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: good (used), functionality: fully functional, Year of construction: 2007, operating hours: 1,153 h, DYNO-MILL KD 6 Agitator Bead Mill (2007) For sale is a DYNO-MILL KD 6 horizontal agitator bead mill, manufactured by Willy A. Bachofen AG (WAB). This machine is a premium Swiss-made unit designed for the continuous dispersion and wet-grinding of pumpable products, ranging from low to high viscosity. This unit was manufactured in 2007 and decommissioned in fully functional, running condition with no known faults. It is distinguished by its exceptionally low usage history, having logged only 1’153 operating hours. It comes equipped with a high-wear-resistant Silicon Carbide (SiSiC) inner cylinder and hardened stainless steel discs. It is sold as a complete bundle, including a peristaltic pump, a tool kit, the original electric cabinet and yttrium-stabilized zirconium balls (used). Highlights • Low Usage: Only 1'153 operating hours—internal mechanics are in excellent condition. • High-End configuration: Fitted with a ceramic Silicon Carbide (SiSiC) inner cylinder (6mm wall thickness) and hardened stainless steel discs for durability and contamination control. Sintered Silicon Carbide (SSiC) prevents product overheating significantly better than Zirconium or Steel liners. • Ready to Run: Sold as a complete package including the Electric Cabinet and a Peristaltic Product Pump. • Features the industry-standard WAB dynamic gap separator and pressure-balanced mechanical seal. • Voltage: Fitted with a modern Danfoss VLT frequency converter featuring wide-range input (380-480V, 50/60Hz), making the machine immediately compatible with both European (400V) and US (480V) power grids without modification Technical Specifications • Manufacturer: Willy A. Bachofen AG (WAB), Switzerland • Model: KD 6 • Grinding Chamber Volume: 6.0 Liters (Net volume ~5.7 Liters) • Throughput: approx. 50 – 200 kg/h (dependent on product/viscosity) • Main Drive: 11 kW Motor (440V / 60Hz rated) • Separation System: Dynamic gap separator (Tungsten Carbide rotor/stator) with adjustable gap width (0.15–1.0 mm) • Shaft Seal: Double mechanical seal (DGD) with integrated pressure rinsing circuit • Cooling: Forced water cooling jacket for the grinding cylinder • Weight: 695 kg Pjdpfx Afex Tdyzeuogt 
 Scope of Delivery • Mill: DYNO-MILL KD 6 base unit • Grinding System: Silicon Carbide (SiSiC) Inner Cylinder & Hardened Stainless Steel Discs • Feed Pump: Peristaltic Pump included • Controls: Original Electric Cabinet included • Grinding Media: Ceramic Beads, Zirconia Partially Stabilized with Yttria, four sizes, each approx. 25Kg (0.4 - 0.6 mm / 0.8 - 1.0 mm / 1.2 - 1.4 mm / 1.6 - 1.8mm) • Documentation: Operating instructions and wiring diagrams Condition • Mechanical: Excellent, running condition with no known faults at the time of decommissioning. • Cosmetic: The machine is clean but shows minor cosmetic wear (see pictures for visual details) • Last application: Food Typical Applications • Ideal for fine particle size reduction in industries such as: • Paints, Inks, and Coatings • Agrochemicals and Chemicals • Life Sciences and Microbiology • Food and cosmetics We ship worldwide. If you are interested or have any questions, please get in touch! Can be inspected in Liestal, Switzerland.

Condition: good (used), Geared motor, electric motor, three-phase motor, electric geared motor -Speed: 35 rpm -Power: 1.1 kW -Design: B3 -Shaft diameter: Ø 48 mm Psdpfjcg Ambsx Afuegt -Protection class: IP 54 -Number: 1x motor available -Dimensions: 590/300/H400 mm -Weight: 60 kg

Condition: good (used), Three-phase motor, electric motor Pedpfx Aob A Rrnjfuogt -Power: 11 kW -Frequency: 50 Hz -Speed: 2950 rpm -Frequency: 100 Hz -Speed: 5900 rpm -Shaft: Ø 35 mm -Design: B3 -Protection class: IP 55 -Dimensions: 520/210/H350 mm -Weight: 65 kg

Condition: new, COMPONENT PARTS: 1.) Sand bunker 2mc: -Volumetric dosing with conveyor belt - 1.5 kW motor Pedpfjiz Dl Ijx Afujgt -Vibrator 0.18 kW - Gravel bunker 2 m2 -Volumetric dosing with conveyor belt - 1.5 kW motor 2.) Electric control panel: „ Start/stop mixer „ Start sand conveyor- the conveyor will stop after the preset time from the time relay " Start gravel conveyor - the conveyor will stop after the preset time from the time relay „ Water quantity setting (digital display) 3.) MIXER, MX500 / MX300: -The tub is lined with an interchangeable jacket made of hardox sheet 4mm; -Padded bottom with removable wear elements (10mm) - Interchangeable mixing hoes made of hardox sheet -Protective net MX500: -Useful volume: fluid concrete 500 liters -Precast concrete: 350 liters -Productivity: 3.5 cubic meters of semi-wet concrete/ hour -Engine power: 11 kW (380V) -Dimensions: 1.70 x 1.70 x 1.40 m - Mass: 900 kg MX300: -Useful volume: fluid concrete 300 liters Precast concrete: 200 liters -Productivity: 2.4 cubic meters of semi-wet concrete/hour - Engine power: 5.5 kW (380V) - Dimensions: 1.40 x 1.40 x 1.40 m - Mass: 650 kg OPTIONAL PARTS: 1.) WEIGHING CEMENT: -Steel funnel with pneumatic opening; -Compressor; -Pneumatic vibrator; -Load cell; - Digital weight indicator - mounted on the electrical control panel. -Auger for cement (connects to the bulk cement silo of the client or at the silo provided by our company) -Mixer cover for blocking cement dust 2.) CEMENT SILO -Capacity: 24 cubic meters (30 tons of cement) -The silo is equipped with a ladder, a railing on the lid and a supply pipe with a quick coupler. -The silo is equipped with a filter, pressure release valve, level indicators, fluidizers and a butterfly valve on the discharge mouth. -Inner diameter 2500 mm; -The height of the cylindrical ferrule 4500 mm; -The height of the conical bottom 1700 mm; -Total height, including railing 8700 mm. - Net mass: approximately 3000 kg. THE MACHINERY ARE NEW. The warranty period for the machines is 12 months from delivery.

Condition: good (used), Frequency converter, frequency transformer, drive converter, controller, variable speed drive -Input: 380 V 50 Hz Pedpfob Rynxox Afujgt -Output: 300 V 165 Hz -Power output: 25 kVA -Dimensions: 800/400/H320 mm -Weight: 200 kg

Condition: good (used), Kraus and Reichert Kuris KVS700 Straight Knife Fabric Cutter Condition: Used and tested for functionality. _RD Pgjdpfxepitkgs Afust 6 kg Find more textile machines - new and used - in our shop! International shipping costs on request!

Condition: new, Year of construction: 2023, functionality: fully functional, overall weight: 8,000 kg, Siemens Energy transformer Year of manufacture: 2023, new, not commissioned Incl. enclosure Pgjdpfx Aeyw Tf Ujfuot

Condition: like new (used), Year of construction: 2004, functionality: fully functional, type of input current: three-phase, type of cooling: air, overall weight: 650 kg, ambient temperature (max.): 48 °C, ambient temperature (min.): 16 °C, input voltage: 400 V, total width: 917 mm, total length: 1,615 mm, total height: 1,636 mm, warranty duration: 3 months, Chilled water unit KRAUS – made in Germany!!! Although the unit was connected to the production line, it appears to be unused. The seller informed me that the chiller was connected to the cooling system of the pharmaceutical production line. It was not used for regular operation but served as a backup in case of failure. Manufacturer: KKT Kraus – Kraus Klimatechnik GMBH. Technical data: (also available in the photos). Model: KPC 115-L-S Cooling capacity: 28 kW Maximum power consumption: 13.4 kW Number of circuits: 1 Number of fans: 2 Pjdszlaz Aspfx Afuogt Noise level: 65 dB Power supply: 380-415 V / 3 / 50 Hz (currently with a 5x32A plug). Year of manufacture: 2004. The unit was stored in a closed room and shows absolutely no signs of corrosion. The unit was installed in the production line as a backup for pharmaceutical production; it was required but appears not to have been used in regular operation.