Belt system buy used

Identified location: Ashburn (US) (Edit)
Enter your address
or
Move
1
Elect./Voltage: 208/230/460/600 V, 60 Cy, 3 Ph Nfshr D M C SYSTEM SY B2H 2200 + T2H ... TOP & BOTTOM Wide Belt Sanding Line, equipped with (2) contact [...] width 2,200 mm (86-5/8"). Including in & outfeed roller conveyors with driven rollers and synchronized feed speeds. Head configuration bottom sander: -- 1st Head: BOTTOM Steel contact roller, 400 mm dia (15-3/4"), spirally grooved, with 37 kW (50 HP) motor. Electronic Grit-Set, activated through HYDRA Control. -- 2nd Position: Hi... more
6

transport belt SYSTEMATIC PVC

Rietberg, GermanyGermany dealership location
6468 km
good (used)
machine transport belt manufacturer Systematic type PVC belt part Id-no. 2239535 year of construction 2007 ... more
1
Length: 5,35 m. Width: 60 cm Bajszhibms Height adjustable +/- 70 cm more
10
Conveyor belt set including turnable/tilting belt Brand: Vanderlande Drive: SEW C0nimpx Total length: 50m (in parts of 305cm Width: 80cm Tilt length: 100cm Professionally disassembled, bundled and packaged. A total of 36 sets of 50m available! more
3

Conveyors Klanke CBA 955

Osnabrück, GermanyGermany dealership location
6422 km
2008
good (used)
Container filling system / conveyor belt system Turret with horizontal Rotary and longitudinal moving conveyor on sturdy galvanized frame, swivel bearings. Incl. support climbing belt and tied up to the automatic filling of three large containers. PLC control Distribution belt gear motor 2 .2kW / conveyor width 900 mm Achabstand 5500 mm Drive rotation 0, 6kW Rotation drive +/-90 Climbing belt conveyor width 600 mm / distance 4000 mm / drive 1, 1kW High belt conveyors conveyor width 600 m... more
6
The continuous furnace by Koyo has 7 Heizonen, related to the temperature, all individually set. (via the control panel) That is, curves temperature can be used with the oven. For example: In every 20 ° C 180 ° c to 40 ° C and vice versa. After the heat, the item goes through the transition zone from the zone to the cooling zone, where the element at room temperature down is cooled. Through the chain belt, it is possible to heat the element from above and below. A thermocouple is install... more
1
Roller Conveyor curve Roller conveyor belt curve 180 degrees Rolleon Netherlands-hand roller conveyor and conveyor belt curve We have about 10,000 meters roller conveyor in stock 80-2000 mm wide and we have about 200 belt conveyors in stock. Technical details of the conveyor belt curve 180: supplies last: 2 pieces Rolbreite 400 mm web width 450 mm curve (degrees) 180 degrees radius 1000 mm Side guides - height 30 mm rail profile aluminum motor voltage 380 V electric motor drive 0,37 kW Curve 1 h... more
1

Double belt weighing system for large 1-50kg packs AMTEC Weighing

Reinbek, GermanyGermany dealership location
6500 km
2017
as good as new (ex-display)
"AMTEC VERTIwrap weigher double belt weighing system for large 1-50kg packs Double-Belt weighing system for large volumes of 1-50kg of loose materials as bio-pharmaceuticals, food, farm chemical and fertilizer, building materials, ceramcis, chemicals, drug ingredients, seeds, cereals, charcoal, flow soil, plastic grains, etc. - Specifications: 65 liter hopper; all product contacting parts in stainless steel (SS340); frame in mild steel with painted surface; Accuracy (depending on product): 0,5-... more
2

Suction belt MWT Lettershopsysteme GmbH Octovacu 1500

Holthusen, GermanyGermany dealership location
6567 km
2017
as good as new (ex-display)
Suction tape with two suction belt Cxyuplca Vacuum single adjustable Speed up to 160m / min Speed infinitely adjustable Height adjustable also available with different lengths Inkjetbasis more
6
Complete Vanderlande sorting system, distribution centre 51 selected sorting-outputs 5300 meter conveyors (belt & roller) 2 Accu-Sort Systems Quad-X barcode scanningsystems Splitting- & merging systems Braking systems Buffer stations/conveyors Bcalctggqj Fire door folding systems Conveyor subdivision: 2773 meter driven belt conveyors 70cm 2385 meter driven roller conveyors 70cm 140 sorting system 100cm Capacity: 6600 colli/hour 240-900mm x 60-650mm x 30-600mm 0,5-35kg Di... more


belt system
daily

New machines via email!

Stay updated!
1
Conveyor belt M-Foerdersysteme 4.250 x 440mm broad, height 200 - 400mm, year: 2001, price: 1.450 €, contact: Herr Rainer Eckerle Lmnyt more
6
For sale a NVL is cross belt sorter. The Sorterverfuegt about 233 vehicles with right left drop goods (640/650 mm) Sorting speed of 1, 8 m / s and per hour, we reach an output of 8640 packages per hour. Powered with 10 Siemens Motors including inverter. 7ob23taay The sorter has over 115 Pakplaetze. 8 article Infeeds per integrated with 4 belt conveyors to the acceleration, timing and synchronization. The price for the sorter incl. Infeeds is € 250,000 net without installation. ... more
3

sweeper incl. even ending belt conveyor System TM

Bruckmühl, GermanyGermany dealership location
6886 km
2008
used
heavy duty sweeper (2 pcs. available) for timber incl. even ending belt conveyor; max. length 3.000 mm; transportation level 1.120 mm; incl. steel construction; Va8qisyj0 more
3

belt conveyor System TM

Bruckmühl, GermanyGermany dealership location
6886 km
2008
used
belt conveyor with 4 sections and pneumatic movible traverse; length 750 mm; 1.750 mm; 950 mm; 3.400 mm incl. 4 pcs. pneumatic hooks; 1,1 kW Vbdbm9mfb more
4

chain and belt conveyor System TM

Bruckmühl, GermanyGermany dealership location
6886 km
2008
used
combination of belt and chain conveyor with 3-4 chains; length of belt conveyor about 1.500 mm incl. 3 pcs. pneumatic hooks; length of chain conveyor about 1.800 mm with 5 pcs. pneumatic hooks Va88slglk more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Cmdmx39 LAIDIG 20 Ft. diameter by 38 Ft. high Silo with a LAIDIG Model 243 Unloader (Reclaimer) and an Unloader Discharge Screw. -- 20' x 38' Silo is a Glass Lined Bolted design manufactured by HARVESTORE. -- LAIDIG Model 243 is a Reclaimer with a single-sweep tapered Auger for equal removal of material from the silo radius, mounted on a horizontal axis to prevent material bridging. -- Professional removal and reinstallation is available. -- Please ... more
4
 Start Chat

Twin Head Wide Belt Sander. Roller+Combi Boere Select 1300KC

Liverpool, United KingdomUnited Kingdom
5686 km
2006
good condition (used)
A high quality heavy duty wide belt sanding machine with Roller first head and Roller/Pad Combi unit second head. Suitable for many different types of sanding work, it has the advantage of both calibrating and fine finishing in just one pass with two different grit sizes for an optimal finish and with the combination of two contact rollers of different hardnesses a perfect finish will be attained everytime. Technical Specification Sanding width 1300mm Sanding height ... more
5
MOTOR 0.55 KW INL. MOTOR FOR FEEDING SYSTEM WEINIG QUATTROMAT 23P Bczckb30hh WEINIG PART NR. 00367489 200-460V 50/60 Hz more
10
SX80/350 Belt Driven Compressor 15 kW 20 HP 3 Phase (Used) MPN : SX80/350 Serial Number : 26126 Year of Manufacture : 2002 Supply : 380 / 415 /440 V Phase : 3 phase star delta Rating : 15 kW Horse Power : 20 hp Wxecg Displacement : 80 cfm (63 cfm fad at 100psi) Tank Capacity : 300 litres Tested : No, for spare parts or refurbishment project Damage : Please see images - a few bashes here and there, cage bracket supports have broken and need welding. Please Note : Compressor i... more
5
Numbers of cross transfers:12 Stck. weight: kg weight of the machine ca.: t length roller conveyor:4300 mm Guiilw width roller conveyor:230 mm heigth roller conveyor:600 mm engine output:2,2 kW Number of motors:2 Stk. Kaltenbach cross transfer table segments, chain drive system 4300 mm x 230mm x 600 mm, separate waves with coupling, 2 drive motors, each à 2,2 kW more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Clqkmu7 LAIDIG 25 Ft. diameter by 40 Ft. high Silo with a LAIDIG Model 298 track-driven Unloader (Reclaimer) and an Unloader Discharge Screw. -- 25' X 40' Silo is a Glass Lined Bolted design manufactured for LAIDIG by COLUMBIA TECH. -- LAIDIG Model 243 is a Reclaimer with a single-sweep tapered Auger for equal removal of material from the silo radius, mounted on a horizontal axis to prevent material bridging. -- Professional removal and reinstallation ... more
4
 Start Chat

Twin Head Wide Belt Sander. Roller+Combi Boere TKC1300

Liverpool, United KingdomUnited Kingdom
5686 km
2002
good condition (used)
1300mm sanding width 150mm sanding height Bczujrlj9s Belt dimensions 1310 x 1900mm 2 working units 1.Rubber contact roller 80 shore hardness x 25hp [ tbc ] 2.Combi rubber roller [ 50 shore ] + pad x 20hp [ tbc ] 3.Rotary cleaning brush x 0.75hp Variable feed speeds 5 - 25m/min via 2hp motor Sensor for auto height adjustment of feed table LED thickness readout Infeed roller table approx 2000mm long [ tbc ] Outfeed roller table approx 2000mm long [ tbc ] Year - 2002 CE Complia... more
6
Technical data feeding conveyor, underfloor, position 12 Manufacturer Bollegraaf Typ HBT 1200/1600 Year of construction 1998 Driving motor 5,5 kW Length feeding conveyor 9,440 mm Effecting width 1,550 mm Height of side wall feeding conv. 550 mm Transport dimensions over all approx. 9,600 x 2,300 x 1,500 mm (L x B x H) Bb8dq7ym Weight approx. 5,000 kg Technical data elevating conveyor with goose neck, position 15 Manufacturer Bollegraaf Typ HBT 1200/1600 Year of construction 1998 Driving m... more
15

SCHWARZ LAGERTECHNIK SYSTEM PKM

Wendlingen am Neckar, GermanyGermany
6678 km
2010
ready for operation (used)
Ey998or more
2
Length of roller conveyors - infeed: mm Length of roller conveyors - outfeed: mm Tkgx2kk Numbers of cross transfers: Stck. more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Bb9qk9goks GRECON-DIMTER PROFIJOINT Finger Jointer with the following features and specifications: Vertical and horizontal finger joints in a wide variety of patterns. Incoming block from 6" min. to 27.5" max. long; 3/4" min. to 2 " max. thick; 1-1/4" min. to 6" max. [...] length up to 20' maximum. Works equally well in hard or soft [...] with: -- System includes Finger Joint Shaper with traveling transport belt; single shaper with transport belt at the cl... more
3
• approximately 2.2 million color clicks and 1 million s/w clicks • was until 28.02.2018 in the maintenance contract • 2:1 copy prints in color DIN A3 • maximum 71 page color and SW per minute • D original feed • 3 paper magazines standard • 1 large room tape up to SRA3 paper and up to 300 g / m ² Bbqq7be0v2 • Duplex unit • Bypass • FIM = smoothing unit • Light-production finisher with 2/4 Pocket Hole • EFI controller Ext. more
6
Manufacturer BOA Typ 1700 HSB KTH Year of construction 2002, overhauled in 2017 Driving motor 5,5 kW Length feeding conveyor 4,000 mm overall Length elevating conveyor 14,000 mm Length goose neck 1,530 mm Grade 30 ° Effecting width 1,700 mm Dimensions feed hopper Inside dimensions 1,920 x 1,090 x 3,100 mm (w x d x h) Outside dimensions 2,100 x 1,700 x 3,100 mm (w x d x h) D89vefed Comments: The conveyor belt and hopper were completely overhauled. The frame construction and side walls as well ... more
11

hot runner systems Fiege electronic GmbH fitron 16 TP

Langenfeld, GermanyGermany dealership location
6407 km
2013
excellent (used)
warehouse no.: 502631 manufacturer: fitron Typ: 8016L year of construction: 2013 technical referenz: • Micro-process controller with PID algorithm and automatic optimisation • 16 zones • Each zone 230 V / 16 A • Control via microcontroller with 7“ touch panel • Access authorisation at 3 code levels for user, setter and administrator • Functional in any desired language • Automatic mould-test and diagnostic tool with log function • Automatic starting control for drying out hu... more
5

Pipe profiling burning system Biber 3

Köln, GermanyGermany dealership location
6416 km
1997
used
total power requirement:2,0 kW weight of the machine ca.:0,5 t dimensions of the machine ca.:12 x 0,6 m Pipe-diameter on the chuck:20 - 200 mm Tube length:max. 6000 mm wall thickness max.:10 mm machine dimensions (length x width x height):2800 x 540 x 1620 mm cutting path speed:0.1 - 3.0 m/min. 00olvwep tube conveyor speed:0.1 - 5.0 m/min. track length of tube conveyor:250 mm length of cutting curve max.:250 mm Pipe profil burning system / Plasma Pipe cutting machine BIBER 3, including a 100... more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Bbu7lhicnd HEIL 80-24 Rotary Drum Dryer System complete with the following components and features: -- Burner Controls and Cyclone. -- HEIL 8'x24' Triple-Pass Drum. -- 12 MM BTU WEBB Biomass Burner. -- Main Fan with 75 HP Motor. -- Blowpipe, Cyclone and Cyclone Airlock. -- Fuel Feed Bin. -- 3-Deck, 6' x 6' Screen. -- NOTE: The burner has reportedly been used very [...] type of system is typically capable of drying up to (4) tons per hour sawdust o... more
7

Sundry Presses HAEGER Type 412-220 4 ton Fastener Insertion System. Manufactured 2004

Leicestershire, United KingdomUnited Kingdom dealership location
5832 km
2004
ready for operation (used)
Serial No. 4HMI0579 Capacity 4 ton Input 240/1/50 Ibj0esp Throat depth 12" Fitted with wander type foot switch Features quantity of anvils Length 3' 8" Width 2' 6" Height 6' 2" Nett weight actual. 420 Kgs / 0.41 Tons more
6
Manufacturer Bollegraaf Typ HBT 600/2000 x 21,986 Year of contruction 2000 (overhauled 2017) Drive power 7,5 kW Length infeed conveyor over all 6,723 mm Length module infeed conveyor 5,500 mm Height infeed conveyor over all 1,300 mm Height side wall infeed conveyor 500 mm Bb2effqc Length elevating conveyor over all 13,923 mm Lenght module elevating conveyor 13,300 mm Height side wall elevating conveyor 800 mm Gradient of elevating conveyor 30° Length gooseneck 1,340 mm Lenght module gooseneck 1... more
4
length in total 20584 mm band width 225 mm conveying height 3030 mm Bccqu0vqrx 17000 mm total power requirement 2 KW weight of the machine ca. 9 t Conveyor with 4 horizontal elements (each 4100 mm long) and one vertical element. Conveyor has a level sensor and a pump for water. Conveyor could be reduced in length to 4700 mm, 8800 mm or 12900 mm. more
5
Number of drilling agregates:2 Stk. bore diameter:8 - 50 mm Cutting system: Eeeler2 weight of the machine ca.:12 t floor-plate width:220 - 2500 mm Plate thickness:6 - 60 mm floor-plate length:50 - 6000 mm workpiece weight:6000 kg Tool changer:2 x 6-fach boring spindle drive:26 kW rapid- return speed:10000 mm/min bore feed:0-800 mm/min drilling spindle positioning:30000 mm/min torch height adjustment:200 mm threading:M8 ? M30 Kaltenbach KF 2512 CNC Plate Processing Center The Kaltenbach KF ... more
1

DRYING SYSTEM MEC 12X55

North Carolina, United StatesUnited States dealership location
518 km
used
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Gvnkzk Drying and Shaving operation complete with the following major components and features: -- MEC 12 Ft. x 55 Ft., triple-pass, Rotary Drum Dryer complete with Trunnion Bases and Drum Drive. -- 35 million BTU Biomass Burner with vortex Fans, Fuel [...] Fan, Heat Modulation Controls, Fuel Bin with controlled Auger discharge and Fuel Cyclone. -- 3 Ft. x 60 Ft. Dryer infeed Conveyor with Cover. -- Drum Inlet formed Transition with Airlock Feeder. -- 1... more
3
like NEW, only 350 h !!! - dual chamber System, separation of the cleaning and rinsing media - additionally ultrasound cleaning systems E0tnyk0e0 - basket dimensions LxWxH: 670 x 480 x 300 mm - max. basket weight: 100 kg - machine dimensions LxWxH: 2200 x 1400 x 2110 mm Price new: € 75.000,- more
6
Manufacturer BOA Typ PCS 6000 D83vym2z Year of construction 2003 Hours of operation 10,210 h Dimensions separation bed inside 6,000 x 1,765 mm (L x W) Dimensions separating bed outside without motor 6,750 x 2,435 mm (l x w) Drive power 4 kW Transport speed 25 - 67 rpm. Frequency control 25 to 67 Hz Tilt angle 67 ° Number of axles 12 pieces Number of plastic discs per axis 17 to 18 pieces Accessories: 1 piece feeding conveyor to the TCS 6000 1 piece discharge conveyor for the paper 1 piece conve... more
6
Type: KCSB 1100 Ljvp7 used machine working width: 1100 mm combi unit contact roller 80° shore Year of construction: 1985 location: Warehouse / 82281 Herrnzell more
1

conveying belt MIRACON

Norderstedt, GermanyGermany dealership location
6479 km
2005
used
Uct2wbjy3 working range 200 mm width of band 200 mm height 900 mm more
1
Elect./Voltage: Bbu0fthd8o CADORET MANUAL FINGER JOINT SYSTEM: Shaper Section includes right and left hand Shaper Units, each with AC variable speed drives from 30 to 60 [...]: Shapers with hand-wheels and digital readout scales; on on the horizontal saw adjustment and one each on vertical and horizontal spindle adjustments, -- Retractable guide knives for running flooring; quick change chain lug back up blocks for end matching. -- Extended arm for running up to 16' long material; roller... more
8

Poly foil wrapping machine system BVM Brunner GmbH Mailmaster 4005

De Trompet 1130, 1967 DA Heemskerk, NLNetherlands
6203 km
2005
good condition (used)
We have a BVM Brunner GmbH Mailmaster 4005 available! The BVM Mailmaster is designed to tightly wrap direct mail products or catalog materials without using a shrink tunnel. Bbrygdenbv Technical details: Format width: From 80mm up to about DIN A3 long Bag length: From 80 - 550 mm, infinitely adjustable Pack height: Up to 60mm with Servo Drive Sealing system: Constantly heated, maintenance free with digital temperature control Speed Up to 150 cycles per minute, based on product Descr... more
6
Pos. 30 Ballistic separator Manufacturer Stadler Type BS 2150-06-04-131 Year of manufacture 2007 Use as PPK separator Throughput capacity up to 12 tons/h Equipped with 6 pcs. oscillating paddle 6,200 mm long Drive power 5,5 kW Dimensions ballistic separator 6,160 x 2,450 x 1,550 mm (l x w x h) Weight approx. 3 tons Dimensions steel construction 9,300 x 6,600 x 4,200 mm (l x w x h) Pos. 50 Fine grain belt underneath the ballistic separator Manufacturer Stadler Type sliding belt conveyor Centre ... more
5

drum belt sander Dankert

Egenhofen / Herrnzell, GermanyGermany dealership location
6816 km
good (used)
Type:  used machine working width: 1000 mm 7j7z7r9vu 2 grinding units Year of construction:  location: Warehouse / 82281 Herrnzell more


belt system
daily

New machines via email!

Stay updated!

to

to

Edit search
BELT SYSTEM
SELL IMMEDIATELY
with Europe's market leader for as little as € 0,49 per ad.
Find out more


Phone: +1 312 94 04 581
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machineseeker chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close