Used Pelleting System for sale (40,625)

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, total length: 69,000 mm, total width: 16,000 mm, total height: 16,000 mm, The system was designed and dimensioned according to Eurocode EN 1993 for the industrial drying of wood chips, sawdust, or similar biomass products and is suitable for use in biomass, wood, or pellet production. Process components: Air heater, deflection rollers, feeding modules, discharge modules, trough chain conveyor, belt tensioning and adjustment device, 7 exhaust stacks (height up to approx. 17.6 m) Designed for hot air or waste heat utilization (e.g., biomass boiler or CHP plant), heat requirement 10,270 kW thermal, installed electrical power 690 kW electrical. The inlet temperature in the dryer is 68°C, the outlet temperature is 42°C, and the heat transfer medium is a water/glycol mixture. The volume flow rate at the dryer outlet is 1,081,000 m³/h. Dust emission value 5 mg/Nm³ (moist), sound pressure at a distance of 1 m 85 dB(A) from the outlet of the discharge duct and the dryer. The dryer is designed for an ambient temperature of up to -40°C; the conveying capacity is at least 70 m³/h and a maximum of 250 m³/h with a bulk density of 260 kg/m³. The furnace is NOT included in the offer; we only sell the belt dryer! The working level of the dryer is supported by steel columns approximately 8.00 m high and is enclosed with thermally insulating sandwich panels. A hall or other production components can be placed under and between the columns (see documents, steel structure). The system has been disassembled and stored by an experienced assembly team; this team can be arranged for transport and reassembly. Please note: Crodpezw Apgjfx Ak Aji We only sell this belt dryer without a furnace and no other parts! Please send your inquiries via WhatsApp to Mr. Sörgel; he is on-site at the factory and may not always be available by phone. Thank you very much!

Condition: used, functionality: fully functional, Year of construction: 2015, Palletizer and pallet wrapper Capacity 100 kg / h Used, no warranty This machine is located in Tata, Hungary. Csdpfjtw Szaox Ak Aeri What is Pellet? Pellets are a natural biofuel made from made from agricultural and forestry wastes, such as dried sawdust, compressed into small cylinders with a diameter of a few millimetres. It possible to obtain a compact product with no additives and chemicals. Benefits of pellets? Among the most important advantages: environmental sustainability (reduction of deforestation and GHG emissions); cheap to produce and affordable to buy. And, due to the pressing process, the calorific value of pellets is approximately double that of wood for the same volume.

Condition: new, Year of construction: 2017, Spiral conveyor for pellets and granules: For discharging and conveying pellets with a capacity of 600 kg/h and a bulk density of 0.7 t/m³, and filling 4 big bag stations with a safety end discharge. 1 Transitube discharge hopper, type: SC – 200 Capacity: 200 liters Overall height: 1,270 mm Without lid With sturdy grating as grip protection With built-in empty indicator, vibrating rod sensor All parts in contact with the product made of stainless steel 1.4301, glass bead blasted 1 Transitube screw conveyor, type 53 PCR Conveying length: 10 m (+/- €285 per meter) Motor with frequency converter, provided by the customer: 230/400 V, 50 Hz, 1.1 kW, 920 rpm Conveying screw with square profile 7x7 made of stainless steel Flexible outer hose made of food-grade polyamide Inlet flange type SC Ø 150 with blanking lid for emptying and 2 clamping rings R Insertion tube for coarse adjustment of the output Outlet flange type GW Ø 150 with grip protection and 2 clamping rings R Sensor connection type M1SW with built-in vibrating rod as maximum level indicator All sheet metal parts made of stainless steel 1.4301, glass bead blasted 1 transitube® screw conveyor, type: 53 PCR/VA PM Conveying length: 8 m Cjdszk I Tkopfx Ak Aeri Motor with frequency converter, provided by the customer: 230/400 V, 50 Hz, 1.1 kW, 920 rpm Flexible outer hose made of food-grade polyamide Square screw 7x7 made of stainless steel 4x intermediate outlets type GM DN 150 with clamping ring Pneumatic shut-off valve with safety end discharge Outlet flange type GW DN 150 with clamping ring Flexible hose 2 meters with mounting flange P1SW for connecting to a container All parts in contact with the product made of material: 1.431, glass bead blasted 4 BIG BAG filling frames Consisting of: 1x base frame, open on one side, internal dimensions 1,500 mm x 1,500 mm Including base plates for connecting the stations and prepared for anchoring in the floor 4x support columns 2100 mm (big bag height 1,850 mm) 1x top frame for hanging the bags With hanging hooks for big bags 1,300 x 1,300 and 700 x 1,100 mm Mounting plate, dimensions provided by the customer for push buttons and light column Support columns and frame parts made of stainless steel Filling connection set consisting of: Crossbars for supporting the conveyor with mounting flange P Ø 150 and P1SW Ø 150 for connecting to the conveyor with built-in vibrating rod as full level indicator Bag spout and bag clip for DN 300

Year of construction: 2024, condition: new, functionality: fully functional, The copper wire granulator can recycle waste copper wire into separated copper and plastic, the process capacity is 100-180 kg/h, the dry physical crushing method does not produce pollution. The granulator is sold with a pre-shredder and a conveyor belt with magnet! Design and manufacture 99.99% excellent efficiency and reliability, advanced technology: ● Airflow gravity sorting system to discharge the copper particles from the insulation. ● Strong vibration separator to separate the weight of the copper granules from the insulation ● Self-cleaning dust collection system to reduce maintenance time and remove dust. ● The machine is compact and takes up little space ● 99.99 % copper purity recovery rate ● High reliability ● High productivity ● Robust and versatile Cedpsu Tq S Hjfx Ak Aori ● Long service life ● Cost-effective Technical specifications Model GRS 180KG Current voltage 380V Power output 8,7 kW Frequency 50 Hz Processing capacity 100-180 kg/h Size of machine 80*137*204CM Net weight 518 kg

Condition: used, Year of construction: 2005, functionality: fully functional, total width: 6,300 mm, total height: 2,100 mm, total length: 20,000 mm, working width: 2,600 mm, input voltage: 380 V, type of input current: three-phase, roll width: 2,600 mm, roller length: 7,600 mm, We offer this ready-to-use ICO SYSTEM reactive PUR hot melt press, model ICO SYSTEM, manufactured in 2005. ICO SYSTEM reactive PU hot melt press line – 2,600 × 7,000 mm For sale: complete industrial reactive PU hot melt press line for single-sided bonding of large sheet materials. This robust production line from ICO SYSTEM International Coating GmbH has been successfully used for years by TABB Interior Systems BV for the production of high-quality laminated sheet materials. The installation is in excellent technical condition, is fully operational, and can be put into production immediately. Key features: Reactive PUR hot melt bonding Maximum panel size: 2,600 × 7,000 mm Suitable for single-sided bonding Year of manufacture: approx. 2005 Fully functional and well-maintained PLC control with touchscreen Automatic vacuum portal for precise panel positioning Throughfeed system for controlled curing and constant pressing force Roller conveyors and transport tables included Suitable for: The installation is suitable for bonding a variety of flat sheet materials, including: Cedezlh Auepfx Ak Aeri plywood MDF HDF particleboard HPL composite panels aluminum and steel sheets various other industrial sheet materials. Production process The line is designed for an efficient and reproducible production process: positioning of the bottom sheet application of reactive PUR hot melt automatic placement of the top sheet using a vacuum portal passage through the heated press controlled curing and output of the finished product. Thanks to the automatic handling, large panels are produced quickly, accurately, and with consistent adhesive quality. Scope of supply The complete installation includes, among other things: ICO SYSTEM heated throughfeed system automatic vacuum portal with suction cups conveyor belts and roller conveyors control cabinet with PLC/HMI complete steel structure and handling. Condition The machine is fully operational, is still in use in production, and is available only due to a change in the production process. Inspection while running is possible by appointment. Interested? Please contact us for additional information, technical specifications, a demonstration, or an inspection. This high-quality industrial press line is ideally suited for companies that want to efficiently bond large sheet materials with a high-quality PUR hot melt bond.

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, type of input current: three-phase, Carton sealer, packaging machine, carton sealing machine, sealing tape machine, adhesive tape machine -Manufacturer: Soco System, carton sealer type T-55 -Carton width: max. 550 mm -Overall dimensions: 1100/800/1750 mm Crodpfezhv Rlox Ak Aei -Weight: 150 kg This additional information is standard for this model. Please always double-check the details during a visit. The Soco System T-55 Cartoning Machine is a state-of-the-art packaging solution designed for efficient and high-speed cartoning of various products. With its advanced technology and robust construction, the T-55 is ideal for industries requiring precise and reliable cartoning, such as food, pharmaceuticals, cosmetics, and consumer goods. Featuring a compact and ergonomic design, the T-55 maximizes floor space utilization while ensuring easy operation and maintenance. Its modular construction allows for flexibility in configuration, enabling seamless integration into existing production lines and adaptation to changing packaging requirements. The T-55 Cartoning Machine offers versatile carton handling capabilities, accommodating a wide range of carton sizes and styles, including straight-line, reverse-tuck, and glue-sealed cartons. It utilizes advanced automation and servo-driven mechanisms to ensure accurate carton forming, product loading, and sealing, minimizing downtime and enhancing productivity. Equipped with intuitive controls and a user-friendly interface, the T-55 provides operators with easy access to machine settings and diagnostics, facilitating quick setup and changeover between different carton formats. Additionally, the machine incorporates safety features to protect operators and prevent damage to products during operation. Overall, the Soco System T-55 Cartoning Machine is a reliable and efficient packaging solution that meets the demanding requirements of modern production environments, delivering consistent performance and high-quality cartoning results.

Condition: used, Year of construction: 2019, Manufacturer: DJM Model: COEX 4 Year: 2019 Condition: Used Serial number: N500003 Stock number: 3365 Number of heads: 4 Capacity: max. 100 cycles/min. Product diameter: max. 60 mm Product temperature: -2 °C to +45 °C Belt width: 440 mm Belt length: 1920 mm Belt speed: 3 - 15 m/min. Power: 3 x 400V, 50Hz, 20kW Dimensions: 2030 x 1625 x 2281 mm Weight: 2500 kg Codpo Ah Ttyjfx Ak Asri For filled products.

Condition: excellent (used), Year of construction: 2011, Duplo DC10/60i collating machine • Stations per tower: 10 stations • Loading capacity per station: 65 mm • Processing speed: Up to 10,000 sets per hour for collating only; up to 5,000 brochures per hour in a system combination. Duplo DBM 500 • Paper formats: Min. 105 x 148 mm to max. 350 x 610 mm (or 356 x 508 mm depending on the specific system configuration). • Paper weight: Fine quality paper from 52–157 g/m²; covers/card stock up to 300 g/m². • Processing speed: Up to 5,000 brochures per hour (e.g., in A5 format). The speed dynamically adjusts to the format (approx. 4,600/h for A4, approx. 4,000/h for A3). • Capacity (thickness): Staples sets up to 5 mm thick (approx. 50 sheets at 80 g/m² paper) and folds up to 25 sheets. • Paper formats: • Width: 120 mm to 356 mm • Length: 170 mm to 500 mm (or up to 508 mm in the Pro system) • Stapling heads: Standard equipped with 2 Hohner stapling heads, expandable to up to 4 heads for multiple or dual-purpose production. Duplo DBM500T • Processing speed: Synchronized with the DBM-500 booklet maker (up to 5,000 brochures per hour). • Trim width: Can remove between 1 mm and 20 mm thickness in a single cut on the front edge. • Booklet thickness: Trims booklets with a thickness of up to 5 mm (which corresponds to approx. 50 sheets / 200 pages at 80 g/m²). • Paper formats (input after folding): • Width: 120 mm to 356 mm Credpfx Akj Ah Tlrs Aoi • Length: 85 mm to 250 mm (final format of the folded booklet)

Year of construction: 2019, condition: ready for operation (used), Output: 50-300kg/h, operational hours counter: 10h, with edge trim extraction. Crjdop Du Aaepfx Ak Asi

Condition: used, Year of construction: 2018, operating hours: 15,339 h, functionality: fully functional, machine/vehicle number: 01584, Available for sale: a used TOMCO2 DE11RB-1500 CE industrial dry ice pelletizer. This machine is designed for on-site production of dry ice pellets. The TOMCO 1500-series specifications indicate a nominal production capacity of approximately 1,500 lb/hour (680 kg/hour). Actual output depends on the CO₂ supply and operating conditions. Machine details: Manufacturer: TOMCO2 Systems Model: DE11RB-1500 CE Year: 2018 Machine number: 01584 Operating hours: 15,339 Condition: Used, listed as excellent and fully functional Nominal capacity: approx. 680 kg/hour Hydraulic system with two cylinders Motor: 30 HP (22.4 kW) Pellet diameters listed for this model: 6–19 mm, depending on the die configuration Operation and maintenance manual available Suitable for businesses producing dry ice pellets for dry ice blasting, food and seafood processing, transport, and related industrial applications. The machine is located in Noordwijkerhout, the Netherlands. Worldwide shipping can be arranged. Contact us for further information, additional photos, an inspection, or shipping details. Worldwide Shipping. Cjdez Az Hwspfx Ak Aori Cold Jet dry ice machine for sale, dry ice machine for sale, dry ice blasting machine for sale, dry ice blaster for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, used dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, die cleaning without disassembly, dry ice paint removal, dry ice coating removal, rust removal, fire and soot damage cleaning, electrical panel cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice TOMCO2 DE01RB-1500, TOMCO dry ice pelletizer, TOMCO2 dry ice pelletizer, industrial dry ice pelletizer, dry ice production machine, dry ice pellet production machine, dry ice extruder, CO2 pelletizer, industrial dry ice production equipment, dual-cylinder dry ice pelletizer, 680 kg/h dry ice machine, 1500 lb/hour dry ice pelletizer, used dry ice production machine, dry ice machine for sale, dry ice pelletizer Netherlands, dry ice production equipment Europe, DrDryice

Condition: good (used), axle configuration: 2 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, first registration: 11/2018, loading space length: 135,000 mm, loading space width: 24,600 mm, loading space height: 26,800 mm, total length: 13,860 mm, total width: 2,550 mm, total height: 4,000 mm, wheelbase: 8,910 mm, color: white, Equipment: tail-lift, = Additional Options and Accessories = - Air suspension = Additional Information = General Information Year of construction: 2018 License plate: OR-80-RF Axle Configuration Cjdpfo Afhq Njx Ak Ajri Rear axle 1: Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg; Steerable Weights Unladen weight: 8,290 kg Payload: 21,710 kg GVW: 30,000 kg Functional Features Tail lift: D'HOLLANDIA DHSMR.20, under-ride guard, 2000 kg Maintenance, History and Condition APK (Technical Inspection): valid until 12/2026 Technical condition: good Visual condition: good

Condition: used, Year of construction: 2017, operating hours: 23,009 h, functionality: fully functional, machine/vehicle number: 01559, For sale: a used TOMCO DE11RB-1500CE industrial dry ice pelletizer. This dual-cylinder machine is designed for on-site production of dry ice pellets. TOMCO’s 1500-series literature specifies a nominal production capacity of approximately 1,500 lb/hour (680 kg/hour), depending on the CO₂ supply and operating conditions. Machine details: Manufacturer: TOMCO2 Systems Model: DE11RB-1500CE Year of construction: 2017 Serial number: 01559 Operating hours: 23,009 Condition: Used, fully functional Nominal production capacity: approx. 680 kg/hour Cjdpsz Az Hdsfx Ak Aeri Hydraulic drive Interchangeable die system Pellet sizes listed for the 1500 series: 6, 9, 12 and 19 mm The dies included with this machine can be confirmed upon request. Suitable for industrial on-site dry ice production for dry ice blasting, food and seafood processing, transport, and other applications requiring dry ice pellets. The machine is located in Noordwijkerhout, the Netherlands. Worldwide shipping can be arranged. Contact us for further information, additional photos, an inspection, or shipping details. Worldwide shipping available. Cold Jet dry ice machine for sale, dry ice machine for sale, dry ice blasting machine for sale, dry ice blaster for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, used dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, mold cleaning without disassembly, dry ice paint removal, dry ice coating removal, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high-pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice. TOMCO DE11RB-1500CE, TOMCO DE11 RB 1500 CE, TOMCO2 dry ice pelletizer, TOMCO dry ice pelletizer, industrial dry ice pelletizer, dry ice production machine, dry ice pellet production machine, dry ice extruder, CO2 pelletizer, hydraulic dry ice pelletizer, dual-cylinder pelletizer, dry ice production equipment, 680 kg/h dry ice machine, 1500 lb/hour pelletizer, used dry ice pelletizer, dry ice pelletizer for sale, dry ice production machine Netherlands, dry ice production equipment Europe, DrDryice.

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, input voltage: 6 V, NEW AUTOMATIC SACKING MACHINE (P SYSTEM Automation) FOR PELLETS – COMPLETE WITH FEEDING SCREW AND CONTROL PANEL For sale is a new automatic sacking machine (exhibition model), designed for packaging pellets and other granular materials into bags formed directly from plastic film on a roll. This solution is suitable for both integration into existing pellet production plants and for new packaging lines. Composition of the supply: • New automatic sacking machine with product weighing and dosing system. • Inclined feeding screw. • Screw designed for connection to a suction and dust extraction system. • Control unit. • Conveyor belt for discharging packaged bags. Operation: The packaging cycle is fully automatic and includes: • Bag formation from plastic film on a roll. • Weight-based dosing of the pellets. • Bag filling. • Vertical and horizontal heat sealing. • Automatic cutting. • Discharge of the finished bag onto the discharge conveyor. Crsdpfx Akoz Sc Aco Asi The machine is designed to be operated by a single operator. Main technical features: • Indicative productivity: up to 200 bags/hour. • Maximum bag weight: 25 kg. • Bag width: 350–500 mm. • Bag length: 500–700 mm. • Packaging material: plastic film on a roll. • Film thickness: 60–120 microns. • Electrical supply: 400 V – 50 Hz. • Installed power of the sacking machine: 6 kW. • Control system: touch screen panel. Integration options: Upon request, the supply can be completed with: • KIT FOR CREATING FOLDED CORNERS ON THE BAGS • Pellet storage hopper of various capacities. • Suction and dust extraction system. • Automatic palletizer. • Pallet wrapper. Supply conditions: New machine, not used or reconditioned. Under manufacturer's warranty. Supply terms: Ex Works – Cremona, Italy.

Condition: used, Year of construction: 2015, The lot consists of: Regrind dryer SCR-2500U-CE SHINI; S/N 2CR14080001; 2014; 2,500 kg capacity; 128 kW heating; 15/17.2 kW blower; 2,790 kg Gravimetric feeder DBW-G1-350N-100 Brabender; max. pressure 2 mbar; 230/400 V; < 70 dB(A) Extruder drive motor ELIN MKH831C04 Elin Motoren; S/N 50667613001; 277 kW; 300-1,960 rpm; approx. 1,400 kg DESCH clutch PPF-142RA1-Kado08E2 Extricom; S/N 13063840; 180 kg; release torque 2,022 Nm; max. 2,500 rpm Gearbox RE5XP PGL41,5 Eisenbeiss; S/N W_K 706419/10/1; 2013; 255 kW; 1,961 rpm input / 400 rpm output; 200 l oil capacity; 2,750 kg 12-screw extruder with vacuum system Extricom; 2015; RE5 XPV-28D; 5,360 x 1,380 x 2,410 mm; 3 x 400 V; max. 400 A; 8,500 kg (technical details – download PDF in "Essential information") Crodpfx Ake Ahhwde Asi Melt pump GPE 90/90-03 Nordson; S/N 26837/B; 2014; 66.3 kW Continuous screen changer K-SWE180-4K/RS Nordson; S/N 26837/d; 2014; 1,500 kg/h; max. 500 bar; max. 300 C Underwater pelletizer PoDV 6 TM Gala; S/N 11430294; 2015; 740 kg Vibrating crystallizer WR 16/6-DV Vibrotechnik; S/N 5818001; 2014; 1,900 mm length; 1,600 mm diameter Bagging unit Double/Small/P R&K; S/N 100004/2014; approx. 3,153 x 1,800 x 3,180 mm Extrusion control cabinet MX Multi-Eco 4V315-S1136 Schneider Electric; S/N 1411738; control cabinet Technical Details: 2,500 kg capacity; 128 kW heating; 15/17.2 kW blower; 2,790 kg

Condition: ready for operation (used), functionality: fully functional, 🔧 Key Features of Gala Underwater Pelletizing Systems • Die-Face Cutter: Utilizes a die-face cutter where molten polymer strands are cut directly at the die face, ensuring uniform pellet sizes tailored to customer specifications. • Centrifugal Dryer: Equipped with a centrifugal dryer that efficiently removes moisture from the pellets, eliminating the need for extended drying times. • Compact Design: The system's design eliminates the requirement for long water tanks, allowing for a more compact footprint and flexible layout in production facilities. • Ease of Operation: Designed for stable and continuous production, the system offers excellent operability, enabling a single operator to manage multiple lines effectively Codpfjwm Nq Eex Ak Aeri

Condition: excellent (used), Year of construction: 2013, operating hours: 3,525 h, functionality: fully functional, machine/vehicle number: 801213, type of input current: three-phase, input voltage: 380 V, LAMINA CLG 1816 CRASH LOCK FOLDER GLUER 1, 3 OR 4 GLUE POINTS • NORDSON • COLD GLUE & HOT-MELT LAMINA CLG 1816 Crash Lock Folder Gluer available for sale. Manufactured in 2013, this machine is equipped with a professional NORDSON gluing system and can operate with 1, 3, or 4 glue points, providing excellent flexibility for different box constructions and packaging applications. The machine can work with both cold glue and hot-melt adhesive. MACHINE SPECIFICATIONS • Manufacturer: LAMINA System AB, Sweden • Model: CLG 1816 • Machine type: Crash Lock Folder Gluer • Year of manufacture: 2013 • Serial number: 801213 • Gluing system: NORDSON • Gluing configurations: 1, 3 or 4 glue points • Adhesive: Cold Glue and Hot-Melt • Operating hours: 3,525 hours • Total boxes glued: 1,595,966 Crsdpezyu Nqjfx Ak Asi • Automatic feeding • Automatic folding and gluing LOW USAGE Although the machine was manufactured in 2013, it was used in production for only approximately one year. The machine currently shows: 3,525 operating hours 1,595,966 boxes glued This represents a relatively low level of use for an industrial folder gluer of this type.

Condition: used, machine/vehicle number: 008493, Introduction system: with grippers Cedpfxjz S T Uuj Ak Asri

Condition: good (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: System 3R-292.3 + 3R-272HP, overall weight: 5 kg, load capacity: 7 kg, The vise has a clamping width of up to 100 mm and a load-bearing capacity of up to 7 kg. The vise is fully functional and has seen little use. It can be purchased as a complete set with a 3R-272HP leveling head. There are only signs of wear on the movable clamping jaw, where a small cut from wire erosion is visible, but this does not affect the clamping performance or accuracy. See the pictures! Cjdj Aa Rfrspfx Ak Ajri

Year of construction: 2002, condition: refurbished (used), functionality: fully functional, machine/vehicle number: V02SC0039, System Ceramics Spa – EASYLINE F50V60 (Refurbished) Manufacturer: System Ceramics S.p.A. Machine type: EASYLINE F50V60 Condition: Used – fully refurbished Cjdpfxoz Df Ucs Ak Aeri Status: In good working condition Automatic system designed for checking the dimensional quality of tiles and subsequent boxing. Technical information: * Brand: System Ceramics * Category: Ceramic tile sorting / packaging equipment * Condition: Refurbished and tested * Functionality: Fully operational * Technical documentation * Availability: Immediate The machine has been professionally refurbished and maintained, ensuring reliability and reduced downtime. Optional services: * Machine inspection * Dismantling and loading * Worldwide shipping available Price: On request Location: Italy Contact us for further details, photos, videos and technical specifications.

Condition: like new (used), Year of construction: 2025, operating hours: 2,025 h, functionality: fully functional, machine/vehicle number: 25-168-T-402; 25-068-F-100-P, overall weight: 200 kg, Equipment: documentation/manual, A Soco System packaging line is offered, consisting of an F-100-P bottom flap folding machine and a T-402-5-2-9 carton sealing machine. Minimum carton width: 320 mm, maximum carton width: 520 mm, maximum carton length: 900 mm, machine dimensions X/Y: approx. 750 mm/1150 mm. Soco T-402 5-8-7 carton sealing machine, carton length range: 200 mm-750 mm, carton width range: 120 mm-460 mm, carton height range: 95 mm-470 mm, sealing capacity: 18/min, maximum tape roll diameter: 385 mm, weight: approx. 200 kg. Includes safety guard and powered conveyor belt, 500 mm wide. The system is in new condition, was put into operation in January 2026, and has only operated for approximately 75 days in a single-shift operation. Documentation is available. An on-site inspection is possible. Crjdpfx Aszvp Uysk Aji

Condition: excellent (used), Year of construction: 2017, Semi-automatic laminating/mounting machine including: Crsdpfx Aks Agfx Is Aoi • Automatic substrate sheet feeder • Precision gluing unit with automatic glue application • Laminating station with automatic front and side registration system • Pressure station • Stacking table • PLC control system • Feeder designed to handle materials 800 mm (32)

Year of construction: 2015, condition: refurbished (used), functionality: fully functional, System Ceramics Spa – LINER 2000 (Refurbished) Manufacturer: System Ceramics S.p.A. Machine type: LINER 2000 60 X 90 Crsdpfx Akozzz Sne Aoi Condition: Used – fully refurbished Status: In good working condition Automatic system designed for check quality of ceramic tiles, suitable for integration into ceramic production lines. Technical information: * Brand: System Ceramics * Category: Ceramic tile sorting / packaging equipment * Condition: Refurbished and tested * Functionality: Fully operational * Technical documentation * Availability: Immediate The machine has been professionally refurbished and maintained, ensuring reliability and reduced downtime. Optional services: * Machine inspection * Dismantling and loading * Worldwide shipping available Price: On request Location: Italy Contact us for further details, photos, videos and technical specifications.

Year of construction: 1993, condition: used, Automatic cut and strip machine designed to process various types of wire. Codpfe Ah Sk Dox Ak Ajri

Condition: excellent (used), Year of construction: 2015, Optimize your packaging line with a reliable, fully automatic case erector from market-leading SOCO SYSTEM, capable of erecting and bottom-taping up to 18 boxes per minute. Crodpfx Ake Ahg Ucj Asi This is a compact and high-performance industrial case erector designed for integration into automated packaging and logistics processes. The machine automatically retrieves flat corrugated cardboard boxes from the motorized magazine, erects the box, folds the bottom flaps, and seals the bottom with tape – ready for immediate filling. The machine is controlled via a user-friendly touchscreen interface from Proface and is built with reliable industrial components, including a Siemens PLC and Festo pneumatics, ensuring maximum uptime and easy maintenance. This 2015 unit is in excellent condition and offers a cost-effective automation investment with a short payback period compared to the new price. With its right-hand outlet configuration, it is ideally suited as a starting point before manual packing stations or directly connected to automatic conveyor systems. Available for immediate delivery. Shipping costs are additional.

Condition: excellent (used), For sale: Professional KEYENCE IM-7500 measuring system with IM-7020 head. The device is designed for fast and highly precise measurement of components in production and quality control. The equipment enables automatic measurement of multiple dimensions simultaneously using a camera. Ideal for CNC workshops, tool rooms, and industrial applications. Technical data Codpo Aibacjfx Ak Aeri Manufacturer: KEYENCE Model: IM-7500 Head: IM-7020 Type: Optical measuring system Country of origin: Japan Automatic measurement by camera High measurement accuracy Condition Used Fully functional Normal signs of use Included in the set KEYENCE IM-7500 unit IM-7020 head Monitor Control unit Keyboard and mouse Wiring