Used Pellet Maker for sale (497)

Condition: refurbished (used), Year of construction: 2012, operating hours: 1,000 h, functionality: fully functional, overall weight: 100,000 kg, Pellet production line of Italian manufacture. Renown brands of machinery like General Dies SRL, Miller SRL, FIDA SRL and other brands. Capacity of the line 1.3 tons per hour Pellet press General Dies TAU4 – 110kw Container with movable floor and hydraulic power aggregate Triple-Pass rotary drum dryer 2.5 tons catalog capacity (effective capacity up to 1.5 tons/hour) Transport divider for biomass separation Pezzolato PTH 660/700 (Wood chipper, possibly excepted from the line if buyer wishes so) Furnace for rotary drum dryer and complementary equipment Hammer mill “Miller SRL” 75 kw Transport conveyors for biomass transport Cyclon for dust removal Cooler silo for dust removal Weighing and packing equipment Electric cabinets for the entire line with cables Ventilation tubes for sawdust and wood chips transport Screw air compressor 860l Gjdpfxji Akrks Al Uobu Pump for grease dozing in central press lubrication system Included are additional pieces of equipment like filter silo bags, metal connections etc. (complete line is between 4 and 5 full trucks of equipment)

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, total length: 69,000 mm, total width: 16,000 mm, total height: 16,000 mm, The system was designed according to Eurocode EN 1993 for the industrial drying of wood chips, sawdust, or similar biomass products and is suitable for use in biomass, wood, or pellet production. Process components: Air heater, deflection rollers, feed modules, discharge modules, trough chain conveyor, belt tensioning and adjustment device, 7 exhaust stacks (height up to approx. 17.6 m) Gbedozw Apgspfx Al Uju Designed for hot air or waste heat utilization (e.g., biomass boiler or CHP plant), heat requirement 10,270 kW th, installed electrical power 690 kW el. The inlet temperature in the dryer is 68°C, the outlet temperature is 42°C, and the heat transfer medium is a water/glycol mixture. The volume flow at the dryer outlet is 1,081,000 m³/h. Dust emission value 5 mg/Nm³ (moist), sound pressure at a distance of 1 m 85 dB(A) from the opening of the exhaust duct and the dryer. The dryer is designed for an outside temperature down to -40°C, the conveying capacity is at least 70 m³/h and a maximum of 250 m³/h with a bulk density of 260 kg/m³. The working platform of the dryer is located on approximately 8.00 m high steel supports and is enclosed with thermally insulating sandwich panels. A hall or other production components can be inserted under and between the supports (see under Documents, Steel Structure). The system has been disassembled and stored by an experienced assembly team, and this team can be arranged for transport and reassembly. Please note: We are selling exclusively this belt dryer and no other parts! Please direct your inquiries via WhatsApp to Mr. Sörgel; he is on-site at the factory and may not always be available by phone. Thank you very much!

Condition: excellent (used), Year of construction: 2013, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: 24480, input voltage: 400 V, The Amandus Kahl flat die pellet press, type 37-850, is a robust industrial machine manufactured by the German machine builder Amandus Kahl for the compaction of various materials. Gbedpfxjz I Tkts Al Usu Key technical data (type 37-850) • Die diameter: 850 mm • Roller diameter / width: 350 mm / up to 130 mm • Number of roller rolls: 4 pieces • Roller speed: approx. 2.5 m/s • Drive motor power: 132 (at 1500 min⁻¹)

Condition: used, Year of construction: 2003, operating hours: 12,000 h, functionality: fully functional, ASCO BP407 – Automatic dry ice production machine for blocks, slices, and pellets Year of manufacture 2003 | 12,635 operating hours | Fully functional | Includes documentation and maintenance history For sale at DrDryice: an ASCO BP407 automatic dry ice production machine for the production of dry ice blocks, slices, and pellets. The machine is used, fully functional, and in good working order. The machine can produce slices in various thicknesses and pellets of 3 mm and 16 mm. The molds for the different product formats are integrated and are selected via the touchscreen. Manually changing the molds is therefore not necessary. Stated production capacity: up to approximately 400 kg per hour, depending on the chosen end product, block thickness, or pellet size. The previous user reported an actual production of 250–300 kg per hour. These are the capacity figures from the existing advertisement; the actual production depends on the operating conditions and product settings. maschinensucher.at Maintenance and operating hours The last maintenance service by ASCO was performed in December 2016, with a meter reading of 12,032 hours. After this maintenance service, the machine has only operated for another 603 hours. Total operating hours: 12,032 + 603 = 12,635 hours. The pump and cylinder have been replaced in the past. Documentation is available with the machine, including technical manuals and service reports. Used Machines The machine is offered with the available maintenance history and associated additional parts and spare parts. Origin and reason for sale Gjdjy R I Uqepfx Al Usbu The machine comes from a large industrial factory that has invested in a new production line and has switched to a different machine manufacturer. Due to this change in the production setup, the ASCO BP407 has been taken out of production and is now available for sale. This is a used, fully functional machine. Worldwide Shipping Cold Jet dry ice machine for sale, dry ice machine for sale, dry ice blasting machine for sale, buy dry ice blasting machine, dry ice blaster for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, used dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, mold cleaning

Year of construction: 2019, operating hours: 5,600 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: DRPL/LP29, Equipment: CE marking, PELLET PRODUCTION LINE – COMERC – CAPACITY 2 T/H Pellet production line with a capacity of 2 t/h, line length 25 m. Raw material: sawdust (spruce, pine, larch). Operating hours: 5600 h. The complete line includes: Sawdust hopper – 80 m³ Screw conveyor from the hopper – length 6 m Sawdust bucket elevator – length 7 m Buffer tank – 1 m³ for the humidification station Humidification and moisture stabilization station Sawdust bucket elevator – length 7 m Granulator buffer tank – 1.5 m³ Screw conveyor to the granulator – length 2 m RMP 520 Munch granulator Acid-resistant bucket elevator – length 8.5 m Gjdez Hw Umopfx Al Uobu Gallen Cuntelfloor pellet cooler Pellet sifter Bucket elevator – length 8.5 m Finished pellet storage tank – 3 t Manual bagging machine – 2–3 people, up to 20 t/shift JKF 15 kW fan for aspiration Aspiration system – extraction from the entire line Cyclone – diameter 1 m Control cabinets – complete Control, measurement and actuation equipment, moisture sensors (2 units) Explosion-proof early spark detection and extinguishing system Visual process overview to be implemented along with the control panel Installed power 217 kW We can send more photos and specifications to interested parties via email. The line is in working condition. Disassembly of the line is the responsibility of the seller. Collection and transportation of the machine is the responsibility of the buyer. We also offer assistance with reassembly, commissioning, and service support. On-site inspection is possible.

Condition: used, operating hours: 500 h, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, Turn fine-grained biomass into uniform pellets with a complete pelletizing system: pellet press, material bunker, drum sieve with conveyor belt and big-bag handling, all from one manufacturer. This EcoKraft RP18 GEN2 system is built around the second-generation RP18 press, developed for fine-grained biomass. It has built-in steam extraction from the pressing chamber and two central lubrication points, which keeps it compact and easy to operate. Only one system available. This is a single used system, not ongoing stock. Once sold, it is gone. Pickup and transport slots are limited (press alone: 650 kg). Best for: pelletizing fine-grained biomass (for example fertiliser, wood or plant-fibre mixes) indoors, protected from the weather, with 400 V three-phase power. Not suitable for: outdoor use, unattended operation, or explosion-risk areas (no explosion protection is included as standard). What the equipment means in practice: RP18 GEN2 press, max. 18.5 kW: powerful press for fine material, with steam extraction from the pressing chamber Bunker 1 m³ with screw discharge and level sensor: the sensor sends a start/stop signal that controls filling of the press Vibration pads on compressed air: help prevent material bridging in the bunker Drum sieve with conveyor belt: screens out fines and collects them in a big bag Complete package (as supplied by EcoKraft AG): • Pellet press RP18 GEN2 with automatic central lubrication • Pneumatic grease system for 18 kg buckets with 18 kg food-grade grease bucket • Digital water dosing pump 54 l/h Godpfx Ajz Rwimsl Uebu • Die 6x20 mm, 45° pre-compression • Material bunker 1 m³ with screw discharge, level sensor and vibration pads • Drum sieve with conveyor belt • Big-bag racks: 1x Vario 1.0 and 3x Vario 1.5 (stackable) • Big bags: 1x 90x90x110 cm and 5x 95x95x150 cm Technical data: Press: 1.70 x 0.80 x 1.70 m, 650 kg, max. 18.5 kW, 63 A CEE plug (50 A upstream fuse required), customs tariff no. 84793010 Drum sieve: Ø300 x 1200 mm, height adjustable, side feed left or right, max. discharge height 1800 mm Conveyor: length 3600 mm, discharge height 2600 mm, belt width 150 mm, 49 cleats, 0.75 kW Manufacturer: EcoKraft AG, Germany, with manufacturer CE declaration Condition: used. Bought second hand in like-new condition, then used by us for approx. 500 operating hours. The bunker is a demo unit with light signs of use. Location: Stanserstrasse 50, 6064 Kerns (self pick-up, transport by arrangement). Price: EUR 70,000. Why you can buy with confidence: approx. 500 operating hours in our own use, complete scope as listed, manufacturer documentation available, in-person inspection in Kerns by appointment. Inspect and test before you buy: you may verify identity, condition, completeness and operation at inspection or pickup. We guarantee what we control: the system is what this listing says it is, complete and functional when you see it. We do not promise throughput or pellet quality for your material, which is why we ask about your application first. Speed bonus: buy by October 27, 2026 and receive EUR 2,000 off, so EUR 68,000 instead of EUR 70,000. Valid until October 27, 2026, or until the system is sold. Action: send us your material, required capacity and destination. We will confirm suitability and provide a transport estimate.

Year of construction: 2018, operating hours: 7,000 h, condition: used, functionality: fully functional, We are offering this used Himel / Gama control cabinet for a pellet press and pellet system for straw / hay / alfalfa, manufactured in 2018. It has approximately 7,000 operating hours. The hourly output, depending on the biomass, is 700 - 1200 kg, according to the manufacturer. We also have a separate press with 90 kW available for €95,000; it has approximately 500 operating hours and was manufactured in 2025. Type: Control cabinet for pellet press Number: 20182138 Year of manufacture: 2018 Power supply: TNC-S 400V AC/N/PE Frequency: 50 Hz Power: 195 kW Gbedpfxjzrvh Eo Al Usu Max. current consumption: 375 A If you have any questions or need more information, please send us a message or call us.

Year of construction: 2005, operating hours: 20,000 h, condition: used, functionality: fully functional, MEWA UG1008 MS industrial granulator – 160 kW For sale: an industrial MEWA UG1008 MS granulator designed for the secondary shredding and granulation of various pre-shredded industrial and secondary raw materials. This is a robust, German-made MEWA unit designed for continuous industrial operation. The machine is equipped with a powerful 160 kW ABB electric motor, a hydraulic material clamping mechanism, a perforated screen, and electrical control cabinets. The unit can be used in various waste and secondary raw material processing lines, depending on the installed screen and the specific material being processed. MEWA UG1008 type granulators are used, among other things, for the granulation of pre-shredded tires, RDF/SRF alternative fuels, and other materials. Gbsdpfxoz Duuxo Al Uju Key technical data: Manufacturer: MEWA Model: UG1008 MS Type: industrial granulator Main motor: ABB Motor power: 160 kW Power supply: 400 V / 50 Hz Rotor diameter: approx. 800 mm Cutting chamber dimensions: approx. 1000 × 800 mm Rotor blades: 25 pcs. Stator blades: 5 pcs. Hydraulic clamping Replaceable perforated screen Electrical control cabinets Total unit weight: approx. 18 t (depending on the specific configuration) These technical parameters correspond to publicly available MEWA UG1008/UG1008 MS specifications. Applications The granulator can be adapted for: pre-shredded tires; RDF/SRF alternative fuels; plastic waste; various industrial wastes; other secondary raw materials that require secondary shredding. The final fraction and output depend on the type of material, its fraction, moisture content, density, the installed screen, and the condition of the blades. Reference MEWA UG1008 technical descriptions indicate an output of up to 2.0–4.5 t/h for pre-shredded tires or alternative fuels; however, this is not a guaranteed performance for your specific machine – it must be evaluated based on the actual material and configuration. Configuration Based on the inspection, the configuration includes: MEWA granulator; 160 kW ABB electric motor; hydraulic system; perforated screen; electrical control cabinets; cables and other related equipment. The machine is sold in the configuration as shown in the photos.

Condition: like new (used), Year of construction: 2018, functionality: fully functional, operating hours: 2,500 h, power: 3.5 kW (4.76 HP), input voltage: 400 V, type of input current: AC, travel distance X-axis: 3,050 mm, travel distance Y-axis: 1,550 mm, travel distance Z-axis: 250 mm, number of axes: 3, number of slots in tool magazine: 9, controller manufacturer: VHF, actuation type: electric, total height: 2,200 mm, total length: 3,500 mm, total width: 2,200 mm, overall weight: 1,000 kg, table length: 3,000 mm, table width: 1,500 mm, Equipment: CE marking, documentation/manual, VHF CAM 1530 PREMIUM – High-precision CNC gantry milling machine with extensive premium features For sale is a high-quality, virtually new VHF CAM 1530 Premium CNC gantry milling machine. The machine impresses with its high precision, robust industrial design, and extensive features. It is ideally suited for the professional machining of plastics, aluminum, and other non-ferrous metals, wood, and composite materials. Thanks to the automatic tool changer, the precise Jäger high-frequency spindle, and the powerful vacuum table, the system offers excellent conditions for efficient and demanding production tasks. The machine is offered as a comprehensively equipped complete package including control system, software, and numerous accessories. Reason for sale As part of the continuous development of our company and the associated realignment of our production, we are investing in a larger CNC system with expanded machining capabilities. For this reason, we are selling our VHF CAM 1530 Premium. Technical highlights Gedpfx Alsz Rz Hce Ujbu * High precision: Repeatability of ± 0.01 mm * Generous travel ranges: X = 3,050 mm, Y = 1,550 mm, Z = 290 mm * Automatic 9-position tool changer including tool length measurement * Jäger high-performance spindle with up to 40,000 rpm * Three-zone vacuum table with separately activatable areas * Backlash-free ball screw drives on all axes * Dual linear guides and double Y-axis drive * Maximum feed rate of 10,000 mm/min * Automatic tool length measurement and Z-axis zero point determination * Extraction system and air cooling, expandable to minimum quantity lubrication * Suitable for contour machining, engraving, and 2.5D and 3D milling operations Equipped with a powerful, liquid-cooled high-frequency spindle from Jäger: Type: Chopper 2300-40 K S5A * Rated speed: 40,000 rpm * Peak power (Pmax/5s): 3.5 kW * Continuous power (S1): 2.3 kW * Hybrid ball bearing * Runout and flatness each below 2 µm * Pneumatic tool change * Tool holder WK19 * Protection class IP54 Software and control The system features a comprehensive software package: * CNC Term – control software * Rhinoceros 6 Commercial – professional 3D CAD modeling software * Cenon CAM – CAM software on a separately integrated Apple computer in the control tower This provides a wide range of options for design, work preparation, and CNC machining. Extensive accessory package The offered complete package includes, among other things: * Haimer Zero Master – professional 3D edge probe * Handwheel control * Three-zone vacuum table (3,000 × 1,250 mm) with vacuum pump * Two pneumatically switchable clamping jaws * Automatic tool changer * 10 tool holders WK19 * 15 collets in various diameters * Various milling and drilling tools * Uninterruptible power supply (Schrack UPS USSEP100) An attractive opportunity for professional users With the VHF CAM 1530 Premium, you acquire a high-quality CNC gantry milling machine that combines precision, flexibility, and extensive automation functions in a single system. Particularly interesting for manufacturing companies, plastics processors, model makers, advertising technicians, and companies looking to expand their CNC production economically.

Condition: excellent (used), Year of construction: 2014, Pellet production line ZEPPI ! Gedsz I S Svjpfx Al Ujbu Capacity - 2t/h Pellet press - ZEPPI 132 Kw Year - 2014 Exellet condition !

Year of construction: 2022, condition: like new (used), functionality: fully functional, machine/vehicle number: WDW-70056, WDW – Calibrated containers – Continuous weighing scale for weighing wood pellets or other pellet-shaped bulk goods, complete with a discharge unit. Performance / throughput: 15.6 tons/hour; weighing accuracy: +/- 0.01 kg; cycle times: approximately 2 weighings per minute; the photo shows a representative image; the machine is delivered in its original packaging. Gbjdpfx Aljz Ixc Ie Uou

Condition: excellent (used), functionality: fully functional, Year of construction: 2009, COLLIN Teach-Line CSG 171 T Strand Granulator For sale is a used COLLIN Teach-Line CSG 171 T strand granulator. Gbedez Rmvvjpfx Al Usu This compact table-top machine is used to produce granules from round plastic or polymer strands. The previously extruded and cooled strands are fed in via a pair of infeed rollers and then granulated by a fixed counter-blade and a rotating impact blade. The infeed and cutting process can be easily observed through the transparent protective cover. The cutting gap between the rotor blade and the counter-blade can be precisely adjusted. The desired speed can be regulated on the control panel. Technical data: Manufacturer: Dr. Collin GmbH Model: Teach-Line CSG 171 T Year of manufacture: 2009 Machine number: 9310 31 09 Connected power: 0.5 kW Electrical connection: 230 V / 50 Hz Rated current according to nameplate: 6 A Dimensions: approx. 290 × 500 × 540 mm Weight: approx. 50 kg Equipment and features: Pair of infeed rollers Guide piece Fixed counter-blade Rotating impact blade Adjustable infeed speed Transparent protective cover Main and safety switch Compact design as a table-top machine Inspection possible by prior arrangement.

Condition: used, Year of construction: 2006, operating hours: 22,000 h, functionality: fully functional, EQUIPMENT FOR TRANSPORT AND MANIPULATION OF RAW MATERIALS The equipment consists of:  Mercedes Actros container truck  Two containers with a volume of 10 to 20 m3 for sawdust  Liebherr bulk loader Equipment condition:  In good condition EQUIPMENT FOR THE PREPARATION OF RAW MATERIALS The equipment consists of:  Waste bin with movable floor - volume approx. 10 m3  Pneumatic transport systems with filter  Conveyor belts and augers Gsdpez I Tm Uefx Al Uobu  Sawdust dryer with biomass burner  Hammer mill for chopping wood chips with associated equipment  Control cabinets for each piece of equipment Capacity of the complete plant:  About 2 t/h of dried sawdust Equipment condition:  Completely overhauled BRIQUETTING PRESS WITH SAW AND PACKING UNIT Full capacity is 3,5T/h A complete briquetting line consisting of the following:  Briquetting press BP6000 CFN consisting of: o Silos for raw materials o Dosing screw o Oil and press head cooling system o Original press head and cooling line for briquettes with a diameter of 90 mm for hardwood o Manual and automatic control system o Current condition: the press has been 100% serviced and all vital parts of the press have been changed so that it is like new ones o Large quantity of spare parts in stock including spare axle and eccentric  Saw for cutting briquettes BRIDGE o Current condition: the equipment has been fully serviced  Automatic packaging machine for briquettes ROSMAN o Current condition: the equipment has been completely serviced and a new control cabinet has been made

Condition: used, Year of construction: 2003, functionality: fully functional, type of input current: three-phase, overall weight: 10,000 kg, power: 264 kW (358.94 HP), input voltage: 400 V, 2 used Salmatec presses, type Maxima 840/125 LF Suitable for compressing sawdust, with forced feed. The presses are equipped with an automatic grease lubrication system for the rollers and main shaft bearings. Gbodpfoz I Tzxjx Al Uou In addition, there is a lifting beam on the press for changing rollers and dies. The motors are 132 kW and of the Hoyer brand, manufactured in 2016, IE3 efficiency class. The presses have always been maintained by Salmatec and have recently been fitted with refurbished rotors. Several rollers and dies are included with the presses. Interested or would you like more information? Please feel free to contact us for specifications, photos, and price.

Condition: used, functionality: fully functional, In this listing, you are purchasing a second-hand “Plockmatic SD-500” booklet-making system Item for sale: 1 x Plockmatic SD-500 with the following equipment: incl. SD BM Booklet Maker incl. SD-BF Bookfold incl. SD RCT Rotate Crease Trim incl. SD-BF Bookfold Meter readings: Total: Approx. 4187 Condition: This listing is for a second-hand machine, which may show signs of wear (minor scratches or yellowing). The machine has been tested to ensure it is in working order Packaging and dispatch: You are welcome to view the machine during our opening hours. Please arrange an appointment to do so! Sea-worthy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, please feel free to contact us directly. Gsdpfxszz Rp As Al Usbu

Condition: ready for operation (used), functionality: fully functional, suction capacity: 20,000 m³/h, production capacity: 1,300 unit/h, No minimum price – guaranteed sale to the highest bidder! The hammer mill (year of manufacture 2021) has only approximately 2 operating hours! The system is suitable for straw, hay, alfalfa, compost, wood, and other agricultural raw materials! TECHNICAL DETAILS Gbsdoz Ar D Ropfx Al Uju Capacity (material-dependent) max.: 1,300 kg/h MACHINE DETAILS Hammer mill power: 75 kW Pellet press: 75 kW, without control unit Bale shredder: 35 kW, including control unit Dust filter capacity: 20,000 m³/h, including control unit Operating hours Entire line: approx. 1,500 h Hammer mill: approx. 2 h EQUIPMENT Pellet press Conveyor belt Elevator Pellet cooler with screen Buffer tank with discharge 2 cyclones with rotary valve airlock Fan for cooler extraction New die Various used spare parts 10 m feed table for the bale shredder Bale shredder, including control unit Hammer mill, including control unit Centrifugal separator Big bag station for dust filter Dust separation technology: EU-ATEX Directive 2014/34 Positive dust explosion assessment from 2023 Note: The line has already been dismantled and is ready for loading.

Condition: used, Year of construction: 2011, functionality: fully functional, SEMI AUTOMATIC CASE MAKER MACHINE DARIX EVOLUTION LIGHT Gbodpjw Inytjfx Al Usu

Condition: excellent (used), Duplo DBM-500PRO + DBM-500T DBM-500PRO Bookletmaker - Maximum speed: Up to 5,000 booklets/hour, depending on paper and format - Minimum sheet size: 120 × 170 mm - Maximum sheet size: 356 × 508 mm - Sheet size with small-format kit: 105 × 297 mm - Booklet capacity: Up to 25 sheets / 100 pages, depending on paper Gbedpfx Aoz Nwt Ajl Usu - Side and corner stitching capacity: Up to 30 sheets of 80 gsm paper - Stitching heads: 2 Hohner heads - Functions: Saddle stitching and folding, side stitching, corner stitching and fold-only - Control: Touchscreen with 12 job memories - Automatic job changeover - Automatic fold roller gap adjustment - Dimensions (L × W × H): 1,610 × 700 × 1,005 mm - Weight: 412 kg - Power supply: 230 V / 50 Hz / 3.8 A DBM-500T Trimmer - Trimming function: Booklet fore-edge trimming - Untrimmed booklet size, spine to fore-edge: 85–250 mm - Untrimmed booklet size, head to foot: 120–356 mm - Finished booklet size, spine to fore-edge: 75–250 mm - Trimming margin: 1–25 mm - Trimming capacity: Equivalent to 50 layers of 81.4 gsm paper / 25 folded sheets - Speed: 4,500 A5 booklets/hour or 3,900 A4 booklets/hour with 10-sheet booklets using 81.4 gsm paper - Settings adjusted through the DBM-500 control panel - Dimensions (W × D × H): 635 × 700 × 1,094 mm - Weight: 241 kg - Power supply: 220–240 V / 50 Hz / 3.3 A Specifications may wary

Condition: used, Year of construction: 2016, Conveyor system for bulk solids Bulk solids conveying system using a flexible screw. The system comprises a FLEXICON stainless steel hopper with a pyramidal bottom, support legs and capacitive level sensor. UTFS-S045-010-X tubular conveyor, approximately 2 m long, fitted with a 114 mm diameter UHMW polyethylene outer tube and flat profile flexible internal screw. Discharge head with DRP-02214T-05-X geared motor. The drive incorporates a 2.2 kW three phase motor operating at 1,425 rpm and 50 Hz, with IP55 protection. The system is ATEX II 3D T125 certified, suitable for operation in Zone 22 environments containing combustible dust. Designed for conveying pellets, plastic granules, powders and other solid products with minimal segregation of blended materials. Gbjdpjz R Auusfx Al Ueu

Year of construction: 2020, condition: used, functionality: limited functionality, We offer this technological line for pellet production from vegetable waste (sunflower husk) – BART-M SRL OGM 1.5, manufactured in 2020, in used condition. Manufacturer: BART-M SRL Model: OGM 1.5 Year of manufacture: 2020 Condition: used Category: 34 Productivity: 800 kg/hour Weight kg: 6800 Dimensions mm Length: 5385 Width: 4400 Height (without exhaust pipes): 6935 Traction: electric Gbjdjztaahepfx Al Ueu Energy performance Total installed power kw: 150 Type of current: Alternating Current frequency hz: 50 Network voltage V: 220/380 Agrotechnical performance: Admissible amount of non-granulated raw material: 2% max Admissible moisture content of cooled granules: 12% max Technical characteristics of the finished product: Caloric value of the granules Mj/Kg: 14-19 (vegetable waste) Kw/kg: 3.89-5.27 Diameter mm: 6-8 Length mm: 40 If you have any further questions or need more information, please do not hesitate to send us a message or call us.

Year of construction: 2026, condition: new, PLN-75 Mini Film Waste Pelletizing Line with Air Cooling The Mini Film Waste Pelletizing Line is designed for recycling low-bulk-density polymer waste at relatively low production capacities. It is a compact solution for processing film production waste and other lightweight plastic materials into reusable pellets. The system can process plastic film in either shredded or non-shredded form, depending on the type and condition of the material. Gbjdpfxjz Nlfmo Al Uou 1. Output Range: 30~50Kg/hour 2. Standard Electricity:380V/3 Phases/50 Hz 3. Main Motor Power: 15 кW 4. Total Power: 29 кW 5. Screw Diameter. : 75 mm 6. Filter: Dual stations manual filter 7. Cooling Method: air cooled 8. Material feeder pusher: equiped 9. Application: LDPE, HDPE,LLDPE pelletizing, scraps or rolls

Year of construction: 1984, condition: refurbished (used), functionality: fully functional, drive type: V-snaren, Motor: 55 kW - 1500 RPM Gbsdpjz Arh Nsfx Al Usu Tread die: 85 mm Die diameter: 362 mm Equipped with a cut-off knife on the door Weight: 1440 kg 1 year warranty

Condition: used, Year of construction: 1985, functionality: fully functional, For sale: granulator from the renowned manufacturer Buhler. Granulator model: DPAA-660 Motor power: 160 kW – option to install a more powerful motor – 200 kW. Die diameter: 660 mm, Gbjdew Uh Nzepfx Al Uju Die working width: 160 mm, Granulator output on straw / sawdust: 2 – 2.5 t/h The granulator is currently dismantled. For a committed buyer, we will assemble it using new wear parts. Contact for more photos and details. Machine available for inspection in Sępólnie Krajeńskie, Kuyavian-Pomeranian Voivodeship, Poland.

Condition: used, Granulation and packaging line. Model: HM700E PRO 11KW Year of manufacture: 2022 It includes: Hammer mill - shredder Chip mixer Chip feeder Granulator Vibrating table Product feed belt (conveyor belt) Pellet hopper with packaging equipment Bag sealer and chip moisture meter Gbjdpfx Alexcy D Eo Uju Hammer mill with cyclone Motor: 11 kW / 400 V Productivity: 300 - 700 kg / h Weight: 360 kg Soft start installed Cutting system 16 hammers Chip mixer: Volume: 1.0 m³ Chip feeder: Motor: 3.3 kW / 380V Feeds up to 800kg / h Granulator: Motor: 22 kW / 380V/50hz; Productivity: 300 - 700 kg/h Weight: 590kg Soft start installed Vibrating table: Weight 90kg Product feed belt (conveyor belt): Dimensions: 5m × 0.4m. Automated packaging equipment: Dimensions: 1, 90x2, 50x2, 30 Volume: 1.5m³ Packing in bags: 1 - 50kg Equipped with two types of scales Bag sealer 220V Moisture meter

Condition: used, functionality: fully functional, Year of construction: 2015, Palletizer and pallet wrapper Capacity 100 kg / h Used, no warranty This machine is located in Tata, Hungary. Gbedpfxotw Szao Al Ueu What is Pellet? Pellets are a natural biofuel made from made from agricultural and forestry wastes, such as dried sawdust, compressed into small cylinders with a diameter of a few millimetres. It possible to obtain a compact product with no additives and chemicals. Benefits of pellets? Among the most important advantages: environmental sustainability (reduction of deforestation and GHG emissions); cheap to produce and affordable to buy. And, due to the pressing process, the calorific value of pellets is approximately double that of wood for the same volume.