Used Wood Pellet Mills for sale (24,199)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2012, operating hours: 19,000 h, Munch Pellet Mill with 2 only 200 hp motors (total 400 hp) electric controls and 60 hp centrifugal cooling fan also second 2011 model 650 pellet mill and 2 skids of new rolls and dies and spare parts. Second mill 2011 has no motors. It is working machine ready for use in case 2012 machine had problem. Hjdpfx Afsxc Nt Notenu

Condition: used, Kahl - Wood Pellet cooler 3-5 tons per hour Hodpfxev R Tdfe Aftonu

Condition: used, The company sells pellet production line and Spe Renergi low-temperature wood chip dryer/kiln PELLET PRODUCTION LINE CAPACITY 6 t/h | CPM, Fisker, Mogensen A fully assembled and working pellet production line with a capacity of up to 6 tons per hour is for sale. Ideal for professional production of pellets from wood biomass, agrobiomass or other raw materials. The line includes: • CPM Championdry hammermill. • 2x CPM Pressess • Fisker (Essegi F1200) branded new fullautomation packaging line • Mogensen vibro sieves • Vecoplan / CPM wet wood chip milling station • Transporters / feeders Additional searparts are available – matricas, rolls, etc. Main advantages: • Large production capacity – up to 6 t/h. • High quality components from European manufacturers. • Line in working order – can be demonstrated in operation. • Available immediately. The equipment is located in Sweden and, upon prior agreement, it is possible to view and test it in person. Price: 400,000.00 EUR (VAT is not included) SPE Renergi Low Temperature Dryer. The Renergi Dryer is used for drying of sawdust and other materials for production of biofuels. The dryer can dry sawdust, bark or wood chips from a humidity level of about 50% to a level of approximately 10 %. This low-temperature dryer utilizes warm (or hot) water from a recommended temperature of 65°C and higher. Maximum water temperature - 110°C. Power supply safety: The dryer must only be fed by 3x400 V AC (630 A) 50/60 Hz with a separate Protective Ground conductur. Power supply Data: • Voltage 400 V AC, three phase • Recommended fuses in supply line: maximum 3x630 A • Typical power consumption: 200kW The dimension of the Dryer are roughly 17,4 by 5,7 meters, with a height of 10,7 meters. The floor space required is approximately 21,4 by 8,0 meters. A ceiling height of at least 15 meters (or 4 meters above the top of the media inlet). Air supply: at least 24 kg gas/s fresh air is required for the operation of this machine. This corresponds to 20nm3/s, or 72 000 nm3/h. Airflow: max 200 liter/min Air pressure: min 4,5 bar, recommended 6,0-8,0 bar Water supply: hot water supply, with a flow of 32 dm3/s. Water pressure: min 1.5 bar, max 6.0 bar Operating temperature range: • Incoming air temperature: -20°C to 50°C • Relative humidity: 0% to 60% Raw material/media: • Relative humidity: 45% to 55% by wieght Hnodpfowp Rqfox Afteu • Requested relative humidity: 8% to 15% in the dried material Capacity: • The dual-cell, 4 m wide dryer can typically handle 2400 kg of material with a moisture content of 55% by weight in each load • The dryer is capable of drying 6000 kg raw material, with a water content of 55% to 10% in approximately one hour. SRE’s dryer is desinged in accordance with European directives. The equipment is designed to conform to the essential requirements of: • The Machinery Directive 2006/42/EC • LVD 2006/95/EC • EMC 2004/108/EC The dryer is located in Straupe parish, Cēsis district, LV-4152, Latvia. Available for viewing on working days, 08:00 to 17:00, by prior agreement on the viewing time. The dryer is already dismantled All electrical schematics, manual, operating instructions available Upon request, we can provide a contact person with this type of working dryer for consultation Price: 30,000.00 EUR (VAT is not included)

Condition: excellent (used), Year of construction: 2010, 153 USED PWSB Bakery Oven, Wood-Fired, Pellet-Fired. Hsdpfx Afexfkx Eetsnu Year of manufacture: 2010. TECHNICAL DATA: - Number of chambers: 3, - Ceramic-lined baking chamber, - 6 pellet burners (2 per baking chamber). EXTERNAL DIMENSIONS (in cm) - Width: 300, - Depth: 400 (including burners) - Height: 290, Pellet hopper: - Capacity: approx. 8-10 tons, - Height: 700, - Diameter: 270 cm. CHAMBER DIMENSIONS (in cm) - Width: 180, - Depth: 200. We offer devices in various technical conditions and prices: 1. Directly from the bakery. 2. After inspection with a commissioning warranty. 3. After renovation with a 6-12 month warranty. The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: renovation / transport / assembly / commissioning of the device. The price is a net price per 1 pcs. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, batch oven, shelf oven, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Condition: excellent (used), functionality: fully functional, height adjustment type: electric, power: 90 kW (122.37 HP), input voltage: 380 V, Ready for work. Maximum capacity from the manufacturer 1.5T/H Hnsdpfx Aew Ulq Aoftou

Condition: used, Year of construction: 2009, operating hours: 1 h, machine/vehicle number: -----, Business Relocation – High-Quality Pellet Production Plants for Sale! For years, we have been recognized as one of the leading manufacturers of premium pellets. Due to the relocation of our production site to our main plant premises, attractive opportunities now arise for companies in the wood and pellet industry: We are offering you the chance to acquire our currently operational production plants for manufacturing A1plus grade pellets. Your Benefits • High-quality machines and equipment currently in operation • Ideal for producing premium-grade A1plus pellets • Facility visits possible during ongoing production until mid-October 2025 • Attractive conditions for prompt purchase • On-site inspection & consultation Interested parties have the opportunity to see the equipment in operation on site and gain a comprehensive impression of the condition and performance of the machinery. Hnsdpfow Tdk Sox Aftou For initial orientation, we provide you with informative photos of the machines. Upon request, we are happy to send you detailed technical specifications and provide individual consultation. For further information or to arrange a viewing appointment, please do not hesitate to contact us:

Condition: good (used), 3 tonnes per hour. Factory stopped production in 2013. Kahl pelletizer was renovated in Germany. Price does not include dismantling. Hnodpfx Aexlgddoftou

Condition: used, Belt conveyor for wood pellets Hnjdpfx Aowv Sn Eoftsu Manufacturer: Sew-Eurodrive Length: 23cm Width: 1 m Power: 9.2kW

Condition: used, functionality: fully functional, Blowing container for wood pellets, divided into 3 separate compartments, new tarpaulin, works fine. Hnedpfx Afottv Ulotsu Has been used to blow wood pellets into silo

Condition: used, functionality: fully functional, Year of construction: 2015, Palletizer and pallet wrapper Hnedpfxetw Szae Aftsu Capacity 100 kg / h Used, no warranty This machine is located in Tata, Hungary. What is Pellet? Pellets are a natural biofuel made from made from agricultural and forestry wastes, such as dried sawdust, compressed into small cylinders with a diameter of a few millimetres. It possible to obtain a compact product with no additives and chemicals. Benefits of pellets? Among the most important advantages: environmental sustainability (reduction of deforestation and GHG emissions); cheap to produce and affordable to buy. And, due to the pressing process, the calorific value of pellets is approximately double that of wood for the same volume.

Condition: like new (used), Year of construction: 2022, E450PM - AUTOMATIC EDGE BANDING MACHINE V000047 LME450PM-5 with joint trimming unit Machine in excellent condition VOLTAGE 400/50/3 CONTROL WITH 7" TOUCH SCREEN EXCHANGEABLE GLUING UNIT VR - MULTIFUNCTION TRIMMING UNIT Tool for straight/radius trimming TOOL KIT R=2 mm FLAT SCRAPER RELEASE AGENT UNIT Hedpfoxac Hwjx Aftonu LED INTERNAL LIGHTING DOCUMENTATION IN GERMAN INFRARED LAMP for panel pre-heating SCRAPER UNIT Location: ex stock 54634 Bitburg - immediately available -

Condition: good (used), Year of construction: 2008, cutting length (max.): 6,100 mm, height adjustment type: electric, +Mobile Bandsaw Wood-Mizer LT70+ *Cutting length 6.1 m *Turbo diesel engine 42 HP *Cutting thickness computer Accuset Hnsdpfew Dt A Hjx Afteu *Band lubrication system Lube-Mizer *Electric height adjustment *Electric feed *Chassis (2,500 kg) with road approval *Debarker +Hydraulic Package 7+ *Log loader *Log turner *Side supports *Outfeed rollers *Central clamp *3 hold-down clamps *Radio remote control Max. log diameter 95 cm Max. diameter between rollers 73 cm Max. cutting width (cant) 64 cm Max. cutting height above blade 39 cm Max. cutting length 6100 mm (reinforced bed) Incl. approx. 50 saw bands.

Condition: like new (used), Year of construction: 2024, operating hours: 1,000 h, functionality: fully functional, Complete Pellet Production Plant. The plant has an average production capacity of 4.5 t/h of pellets. The line, installed in Valtellina in the province of Sondrio, is complete with all necessary components for the pelletizing process: A section dedicated to loading raw material (sawdust or wood chips, smaller than G40) and its storage inside a 100 m³ silo. A second section dedicated to drying the raw material using a rotary dryer powered by a pellet burner, the entire system equipped with a cyclone bag filter for dust abatement. The line also includes a storage station for the dry material ready to be pelletized. The pelletizing station features 2 pellet mills with a capacity of 2.5 t/h each, installed in parallel. Subsequently, there is a cooling and bagging line that ends with a palletizer, enabling the finished pallet to be handled by forklift. Hnodpfxowx N Tqe Aftou The plant is entirely controlled via software from a control room, except for raw material and finished product loading/unloading operations, as well as the start-up and shutdown of the pellet mills. The plant comes complete with certified electrical system. The installation also includes a reception cabin and a transformation cabin, both equipped with panels and transformer. Total installed power: 500 kW. Average power consumption of the plant: 220 kW. We are interested in selling either the plant, the entire company, or a majority share. There are renewable contracts in place with local sawmills for the supply of top-quality fir sawdust. A resale contract is in place for the entire pellet production with a leading Italian distributor. Maintenance, spare parts, service, and expansion contracts are also in place. Sale is due to personal reasons.

Condition: used, functionality: limited functionality, We are selling our pellet press from La Meccanica, model: CLM200. The machine operated without any issues until it was taken out of service. It was regularly maintained and serviced by a professional technician—maintenance documentation and records are available. Both the contact details and all records will of course be provided. Only the two rollers should be replaced. The machine can be inspected under power. Hjdpsxmwl Uofx Aftsnu Included with the machine: • 2 additional (completely refurbished) press dies with 4mm press diameter • 1 set of new collar rings • 1 set of newly refurbished rollers Also included is a custom-made stainless steel feed hopper with integrated mixing unit, as well as the discharge system including pellet cooling and screening. This, too, is a custom-built solution. A photo of the nameplate will be provided here shortly. For further technical data, please refer to the attached manufacturer photos. Transport is to be arranged and handled by the buyer. Loading assistance and a forklift are available on site.

Condition: as good as new (ex-display), Year of construction: 2023, cutting length (max.): 3,200 mm, cutting width at rip fence: 1,360 mm, cutting height (max.): 90 mm, saw blade diameter: 300 mm, Equipment: saw blade guard, Sliding table saw / Panel saw Brand: Wood-Mizer Model: MS750 Year of manufacture: 2023 Technical data Sliding table length: 3200 mm Blade diameter: 300 mm Maximum cutting height (300 mm blade): 90 mm Maximum blade diameter: 400 mm Scoring unit Maximum splitting width against fence: 1360 mm Automatic YD start Hnsdpfx Aexlg Dkoftju Main motor: 6 kW Scoring unit motor: 0.75 kW

Condition: used, Year of construction: 2000, functionality: limited functionality, overall weight: 3,000 kg, total length: 1,500 mm, total width: 700 mm, total height: 600 mm, input voltage: 380 V, type of input current: three-phase, year of last overhaul: 2010, Joint Strip Oto Mills (strip splicer), equipment suitable for splicing strips at the entry of the rollformer accumulator. Hnsdpexmaa Iefx Afteu

Condition: excellent (used), Year of construction: 2015, Year of manufacture: 2015 Engine: 18.5 kW Cutting dimensions Max log diameter: 95 cm Clearance between rollers: 73 cm Max cutting width (timber): 64 cm Max cutting height above saw blade: 39 cm Max cutting length: 10 m Head equipment Automatic cutting thickness setting device Head feed up/down: Electric Head feed forward/backward: Electric Saw blade guide arm: Electric Saw blade tensioning system: Hydraulic with air cushion Debarker Saw dust outlet diameter: 150 mm Saw blade Hodpfxsxllu Us Aftonu Length: 4670 mm Width: 38 mm 50 mm Saw blade guide wheels Diameter: 600 mm Type: With belt Material: Cast iron Full hydraulics

Condition: excellent (used), TECHNICAL SPECIFICATIONS - Track width: 300mm - Roller width: 330mm - Max saw blade diameter: 300mm - Blade bore diameter: 70mm - Max cutting height: 90mm - Table width with extension: 720mm - Table length: 1800mm * From above: - 2 rows of pawls - Sliding roller, smooth, metal - Planing shaft 320mm, 4-knife shaft 7.5kW - Head with pneumatic brake - Pressure clamp - Shaft with saw blades - Sliding roller, smooth, metal * From below: - Pawls - Track - Pneumatically adjustable pressure and sliding rollers - Central lubrication - Feed motor 0.75kW - Main motor 30kW - Overall dimensions (L/W/H): 1870x1370x1600mm Hodpfx Afswxd Ipotsnu - Weight approx. 2500kg ADVANTAGES – 320mm planing shaft with 4-knife head – central track lubrication – robust construction – used multi-blade saw in very good condition Net price: 29,900 PLN Net price: 7,035 EUR based on an exchange rate of 4.25 EUR (Prices may vary with larger fluctuations)

Condition: used, Year of construction: 2024, The control of the dust extraction system is switched on and off via 2 sensors. Suitable for installation on an existing transport system Sword brush Micro-moistening of the brush elements by means of an antistatic moistening nozzle from Riepe. Moisturisation can be finely dosed via this nozzle. Cleaning the product surface using Sword Brush technology The dust particles are picked up by the brushes and removed by the suction system. A rotating squeegee and compressed air nozzles ensure constant cleaning of the brush systems. Power channel The power channel contains 14 rotating double power compressed air nozzles, which remove particles and dust from the material surface and from recesses. The suction system removes the loosened particles. Technical data: Power: 0.5 kW Self-cleaning system via the rotating brush Dust extraction: 2 x D120 mm at the top + 2 x D80 mm on the side. Motorised height adjustment Material of the panels to be cleaned: MDF, chipboard with melamine Workpiece length: min. 400 mm Panel width: max. 1,350 mm Workpiece height: max. 80 mm Feed speed: max. 35 m/min Removal standard: workpiece surface dust-free Important: Glue residues are not removed. Hjdpjun N Auofx Aftonu Size of the machine: Width: 2,280 mm Installation length: 500mm

Condition: new, New, never used pellet making machine for sale! It can be ordered with a 6 mm or 8 mm sticker (1 piece optionally comes with the machine). Pellet production capacity up to 400-450 kg/hour depending on the raw material. Pellet diameter:3mm, 4mm, 5mm, 6 mm or 8 mm (depending on the chosen sticker). 3mm, 4mm, 5mm, 6mm sticker with roller as a set for the machine for 2000 euros. Sticker diameter: 300 mm. Adjustable pellet length: 10-30 mm. Hedsxmhx Eepfx Aftenu Engine power: 22 kW. Dimensions: 1400 mm x 1000 mm x 1200 mm. Weight: 750 kg. Raw material moisture: 10-12-14%. The moisture content affects the quality of the pellets. Dph3O7 Raw material size: Saw dust: 1-3 mm, straw: 3-6 mm. The density of the granules is no more than 1250/m3. It is located locally in Budapest (EU), Hungary.

Condition: used, Tube forming mill OME 320x8mm (A3782) Tube forming mill OME 320x8mm (A3782) for tube production of 323mm maximum diameter and 8mm maximum wall thickness Make: Ome (Italy) Material: HR, CR, Galv Condition: New Tube Diameter: 168mm – 323mm Wall Thickness: 2mm – 8mm Direction: L-R Speed: 35 meters per minute FORMING MILL Pass N. 1 Driven Forming # 1 Pass N. 2 Driven Forming # 2 Pass N. 3 Driven Forming # 3 Pass N. 4 Driven Forming # 4 Pass N. 5 Driven Forming # 5 Pass N. 6 Driven Forming # 6 Pass N. 7 Side Idle Forming Pass N. 9 Driven Forming # 7 Pass N. 10 Side Idle Forming Hedpfx Afjq Ul Rvetjnu FIN-PASS SECTION, SINGLE POINT ADJUSTMENT Pass N. 11 Driven Fin Pass # 1 Pass N. 12 Side Idle Fin Pass Pass N. 13 Driven Fin Pass # 2 Pass N. 14 Side Idle Fin Pass Pass N. 15 Driven Fin Pass # 3 Pass N. 16 Driven Fin Pass # 4 SIZING SECTION Pass N. 26 Driven Sizing # 1 Pass N. 27 Driven Sizing # 2 Pass N. 28 Driven Sizing # 3 NDT Prueftechnik Pass N. 29 Driven Sizing # 4 Pass N. 30 Driven Sizing # 5 STRAIGHTENING AND SQUARING SECTION Pass N. 31 Idle Turkshead #1 Roll holder plates NOT available Pass N. 32 Idle Turkshead #2 Roll holder plates NOT available Pass N. 33 Idle Turkshead #3 Roll holder plates NOT available Pass N. 34 Idle Turkshead #4 Roll holder plates NOT available Tables and tools for rolls change ABB Motors Costamasnaga Reducers Centralized lubrication system Hydraulic Power Unit Complete Mill Portion Automation with diagrams (OTO MILLS/Elletre 2013) Complete hydralic system Fume and Vapors exhaust system with extraction hoods (EUROFILTER) Complete Zinc exhaust system (DONALDSON)

Condition: new, Year of construction: 2025, power: 11 kW (14.96 HP), Rotary drum dryer for drying various kinds of materials like sand, biomass, sawdust, red mud, bentonite, coal Diameter: 1200mm Length: 10000mm Power: 11-13KW Gradient: 3% Capacity: 1.5-3 t/h Weight: 14Tons Besides this model, we also have the other models of rotary drum dryer 1500x12000mm, 2400x20000mm, and complete drying system for various materials, welcome to contact us for more details Our factory can design suitable solution according to your specific requirements. Rotary drum dryers are highly efficient machines used extensively in the processing of wood chips, sawdust, and biomass. They operate by utilizing a rotating drum that heats and dries the materials as they are transported through the cylinder. The design of these dryers allows them to handle a wide range of particle sizes and moisture levels, making them suitable for various types of biomass. They can also tolerate high-temperature exhaust gases, which contributes to their efficiency and versatility in industrial applications. Rotary Drum Dryer for Wood Chip, Sawdust, Biomass 🌳 Introduction to Rotary Drum Dryers In the realm of biomass processing, moisture control is key. Enter the Rotary Drum Dryer, an indispensable machine designed to efficiently reduce the moisture content of wood chips, sawdust, and biomass. This essential tool enhances productivity, improves fuel quality, and is pivotal in biomass energy production. Let’s explore its functionality and benefits! 💡 💼 Key Benefits of Using a Rotary Drum Dryer 1. Energy Efficiency: Designed to optimize energy use, Rotary Drum Dryers consume less power while delivering high drying efficiency. 🌿💡 2. High Capacity: Capable of handling large volumes of biomass, these dryers are perfect for industrial applications where large-scale drying is needed. 🏭 3. Improved Product Quality: By achieving the optimal moisture content, the dryer enhances the quality of biomass for fuel, pellets, and other applications. 🔥 4. Versatility: Suitable for a wide range of materials including wood chips, sawdust, and various types of biomass, making it a versatile tool in any biomass processing plant. 🌳 # Application Fields and Materials of Rotary Drum Dryer II. Application Fields A. Agriculture - Drying of grains, seeds, and forage. - Processing of agricultural by-products like straw and husks. B. Food Industry - Dehydration of food products such as fruits, vegetables, and spices. - Preservation of food quality during drying. C. Chemical Industry - Drying of chemical powders, granules, and crystals. - Application in the production of fertilizers and detergents. Hnodpfx Afsq Igyvjtou D. Mining and Minerals - Drying of ores, coal, and mineral concentrates. - Reduction of moisture content for easier handling and processing. E. Construction Materials - Drying of sand, cement, and other construction aggregates. - Preparation of materials for manufacturing processes. F. Pharmaceuticals - Drying of pharmaceutical powders and active ingredients. III. Materials Processed by Rotary Drum Dryer A. Organic Materials - Biomass, wood chips, sawdust, and animal feed. B. Inorganic Materials - Sand, clay, limestone, and gypsum. C. Waste Products - Sludge from wastewater treatment plants. - Industrial by-products for recycling or reuse.

Condition: good (used), Engine: 18.5 kW Hsdpfjxhb Uvex Aftonu Cutting dimensions Max log diameter: 95 cm Clearance between rollers: 73 cm Max cutting width (cant): 64 cm Max cutting height above blade: 39 cm Max cutting length: 12 m Head unit equipment Automatic cutting thickness adjustment device Head feed up/down: Electric Head feed forward/back: Electric Blade guide arm: Electric Blade tensioning system: Hydraulic with air cushion Debarking unit Sawdust extraction opening diameter: 150 mm Blade Length: 4670 mm Width: 38 mm / 50 mm Blade guide wheels Diameter: 600 mm Type: With belt Material: Cast iron Full hydraulics

Condition: excellent (used), Year of construction: 2015, Good condition pellet making line OGM 1,5. Capacity for wood about 1 tone/hour. For straw: 1,5 tones/hour. Full line consist of: - Hammer mill 55kw - Cyclone Hedpfx Asu Ttkxoftonu -Cyclone with a fan 11 kw - Screw conveyor. - Silo of material. - materialial mixer to pellet mill - pellet press OGM 1,5 75 kw with new ring die for straw. - elevator - pellet coller.

Condition: used, machine/vehicle number: IDC000044, Wood-Mizer SVS Single vertical saw Power - 7.5 kW Electric - 11 kW Electric CUTTING CAPACITY - Max. Log Diameter 400 mm - Min. Log Diameter 100 mm - Max. Log Length 3.6 m - Min. Log Length 1.2 m Hnsdora Dalopfx Aftju - Max. Width of Cut 300 mm - Min. Width of Cut 1 cm