Used Wood Dryer for sale (8,341)

Condition: repair required (used), Year of construction: 2002, functionality: limited functionality, ★ PRICE REDUCED – MUST SELL: €30,000 (was €80,000) ★ We are selling 3 Imea 2002 Wood Dryers (Imea) + Steam Generator + Boiler (Elbi) 3 Wood Dryers and 1 Steam Generator: - Dimensions: 12.5m x 7.2m x 4.2m 📐 - Capacity for each dryer: 220m3 of timber 🌳 - Steam Generator: 8.5m x 6m x 5m 📐 - Aluminum structure, sandwich panels 🏗️ Kedpfx Aspugxneafsnb Wood and Sawdust Waste Boiler: - Equipped with a pumping system, pipes, and a boiler - Power: 3,500,000kCal/h (40,000kW) Everything operates on an automated system. Total: €50,000 excluding VAT 💰 Dismantling to be done by the buyer 🔧 the seller can assist with a telescopic manitou 📍 Pickup Address: Teiu 337291, Romania 🌍 For more information or to make an offer, please contact us.

Condition: reconditioned (used), Year of construction: 2026, machine/vehicle number: 559, functionality: limited functionality, Dryer optimized for thick timber or hardwood Usable length: 5000 mm Usable height: 1100 mm Usable width: 1100 mm Kedpfx Aasya Ik Aofsnb New electrical cabinet and sensors Controlled drying function Missing external rail and trolley (can be supplied or we will assist the buyer with fabrication) Dryer can be inspected in department 74

Condition: new, Year of construction: 2026, power: 11 kW (14.96 HP), Rotary drum dryer for drying various kinds of materials like sand, biomass, sawdust, red mud, bentonite, coal Diameter: 1200mm Length: 10000mm Power: 11-13KW Gradient: 3% Capacity: 1.5-3 t/h Weight: 14Tons Besides this model, we also have the other models of rotary drum dryer 1500x12000mm, 2400x20000mm, and complete drying system for various materials, welcome to contact us for more details Our factory can design suitable solution according to your specific requirements. Rotary drum dryers are highly efficient machines used extensively in the processing of wood chips, sawdust, and biomass. They operate by utilizing a rotating drum that heats and dries the materials as they are transported through the cylinder. The design of these dryers allows them to handle a wide range of particle sizes and moisture levels, making them suitable for various types of biomass. They can also tolerate high-temperature exhaust gases, which contributes to their efficiency and versatility in industrial applications. Rotary Drum Dryer for Wood Chip, Sawdust, Biomass 🌳 Introduction to Rotary Drum Dryers In the realm of biomass processing, moisture control is key. Enter the Rotary Drum Dryer, an indispensable machine designed to efficiently reduce the moisture content of wood chips, sawdust, and biomass. This essential tool enhances productivity, improves fuel quality, and is pivotal in biomass energy production. Let’s explore its functionality and benefits! 💡 💼 Key Benefits of Using a Rotary Drum Dryer 1. Energy Efficiency: Designed to optimize energy use, Rotary Drum Dryers consume less power while delivering high drying efficiency. 🌿💡 2. High Capacity: Capable of handling large volumes of biomass, these dryers are perfect for industrial applications where large-scale drying is needed. 🏭 3. Improved Product Quality: By achieving the optimal moisture content, the dryer enhances the quality of biomass for fuel, pellets, and other applications. 🔥 4. Versatility: Suitable for a wide range of materials including wood chips, sawdust, and various types of biomass, making it a versatile tool in any biomass processing plant. 🌳 # Application Fields and Materials of Rotary Drum Dryer II. Application Fields A. Agriculture - Drying of grains, seeds, and forage. - Processing of agricultural by-products like straw and husks. B. Food Industry - Dehydration of food products such as fruits, vegetables, and spices. - Preservation of food quality during drying. C. Chemical Industry - Drying of chemical powders, granules, and crystals. - Application in the production of fertilizers and detergents. D. Mining and Minerals - Drying of ores, coal, and mineral concentrates. - Reduction of moisture content for easier handling and processing. E. Construction Materials - Drying of sand, cement, and other construction aggregates. - Preparation of materials for manufacturing processes. F. Pharmaceuticals - Drying of pharmaceutical powders and active ingredients. Knodpfx Aajq Igyvjfob III. Materials Processed by Rotary Drum Dryer A. Organic Materials - Biomass, wood chips, sawdust, and animal feed. B. Inorganic Materials - Sand, clay, limestone, and gypsum. C. Waste Products - Sludge from wastewater treatment plants. - Industrial by-products for recycling or reuse.

Condition: as good as new (ex-display), Year of construction: 2018, For sale is a wood chips and sawdust drying technology with a capacity of 400 kg / hour, together with a raw material feeding system. The machine is brand new and has not been commissioned. Knjdpfxstpxy Te Aafob

Condition: as good as new (ex-display), Year of construction: 2022, functionality: fully functional, Display model. Like-new condition. We are selling a drying chamber powered by a high-efficiency gas burner, featuring an indirect system (no open flames) for heat exchange. Suitable for all types of wood, including softwood and hardwood, as well as pallets or firewood. Used only occasionally for demonstrations and drying cycle tests, and is 100% functional. TECHNICAL DATA Size: 50 m3 Power supply: Fraccaro 200 kW gas burner Intended use: Pallets Firewood Hardwood Softwood Condition: Like-new Special features: Indirect flame burner for maximum safety Structure materials: Aluminum Steel Rock/GLASS wool Control system: Kedpfsyyb Nyjx Aafsnb Fully customizable Remote control Number of fans: 4 Temperature range: 20-75°C

Condition: used, Capacity for sawn timber: approx. 1 m³, max. sawn timber length: 5000 mm. Ksdpfx Aezda D Asafsnb Tank capacity: 1925 l External dimensions: 620 x 100 cm Heated with hot water.

Year of construction: 2014, condition: like new (used), fully automatic supply and exhaust 3 chambers chamber dimensions 6.5 x 4 x 4.1m furnace power 350kW Knjdpfx Aovzuuteafsb

Year of construction: 2018, operating hours: 35,000 h, condition: used, functionality: fully functional, Description of fully automated dryer Major overhauling made by mid 2025 • The housing of the dryer is welded steel construction. The internal floor is made of perfored sheet board. The dryer has an external casing (walls and ceiling) in sandwich panel. • The dryer is driven by hydraulic power pack. • The dryer is equipped with “Ziehl Abegg”, MAXvent axial fans. It's propeller blades are made out of light casted material. One of the most energy efficient product on the market. Hot air generator is equipped with two “Geo Coil’’ heat exchangers. (fully functional but has bent fins) • The control system is equipped with a touch display for operation and visualization of the Dryer. Remote control via PC possible. Incl. web server on the panel for the visualization of drying processes via Ethernet interface. • Working mode according to air exit temperature. The rotational speed of the fans automatically adjusted by the frequency converters so that a desired air temperature level is maintained. Includes pressure measuring devices and extension of control system. • Dryer’s heat carrier temperature approx. 85°C flow temperature and approx. 65°C return temperature. Heat carrier flow defined as 176m³/h • Drying air ventilators equipped with frequency converters • Moisture sensors at the outlet of the dryer: YES • Adjustable height of drying bed: YES • Enlarged fuel receiving bin: Yes General specifications • Infeed material: Wood chips • Size of material: G100 • Water content infeed material max. 45% • Water content outfeed material 7-10% • Designed capacity outlet approx. 1.600 kg/h • Density (wet): 300 kg/m³ • Designed drying surface approx.: 97 m² Knsdpfoxc Eitjx Aafsb • Designed climate conditions on site: Ambient temperature 0°C; relative humidity 70%, air pressure: 990 mbar • Noise pressure level, 75 dB, (1 m distance from air inlet port) Dryer fans, installed power: 74 kW Dryer hydraulic powerpack: 15 kW

Year of construction: 2021, condition: excellent (used), Wood dryer by Italian company BIGonDRY 3 chambers - each: - width 9.6 m - length 7.5 m - gate height 4 m Ksdpfxjvkxmfo Aafjnb Input of one about 100 m3 - total 300 m3 Dryers used only for tests - practically new. Complete with full documentation, automation, laptop and internet connection (remote control).

Condition: as good as new (ex-display), Exhibition machine The Holzprofi dehumidifier HT-100 is ideal for drying wood. The dehumidifier can also be used for drying cellars, construction sites, etc. Advantages and features: - High drying performance even at low temperatures, thanks to hot gas defrosting - Good dehumidification even at low humidity - High efficiency for energy-saving operation Knsdevrvmxjpfx Aafeb - High-quality machine from the industrial sector, durable and suitable for many purposes. - The practical control switches the dehumidifier off automatically when the desired humidity is reached. - Direct hose connection to drain large amounts of water without any problems Suitable for most soft and hard wood types such as spruce, beech, ash, as well as exotic woods and firewood. Due to the high tannic acid content, oak is conditionally or not recommended - as with other dehumidifiers. Technical data: Nominal power consumption: 1050 W Max. power consumption (35°C, 95% R.H.): 1480 W Air flow rate: 1100 mc/h Coolant: R410a (environmentally friendly) Operating range (temperature): 1-35 °C Operating range (relative humidity) T

Condition: used, Year of construction: 2016, operating hours: 15,000 h, functionality: fully functional, machine/vehicle number: kom 4892, Set of dryer equipment, including: Loading bunker Oversize vibrating screen Chain conveyor to dryer Knjdpexa Drhjfx Aafsb Belt dryer Chain conveyors from dryer Vibration separator

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 2,850 kg, total length: 6,000 mm, total width: 1,700 mm, total height: 1,900 mm, loading space length: 5,300 mm, loading space width: 900 mm, loading space height: 1,100 mm, energy consumption: 3 kWh, tank capacity: 5,200 l, Test dryer EUROVAC vacuum dryer KVT 550 For further information please contact us. Kodetqlqajpfx Aafsnb

Condition: new, Year of construction: 2026, functionality: fully functional, power: 11 kW (14.96 HP), A triple pass rotary drum dryer is a type of industrial dryer that is used to reduce or remove moisture from a material. It gets its name from the three rotating drums through which the material passes, each with a different purpose in the drying process. This type of dryer is commonly used in the production of various bulk solids, including minerals, agricultural products, and biomass. Here are the key features and components of a triple pass rotary drum dryer: 1. Triple Pass Design: - The material being dried passes through three rotating drums or cylinders, hence the term "triple pass." Each drum serves a specific purpose in the drying process. 2. Material Flow: - The material enters the dryer and first passes through the innermost drum. After the initial drying phase, it moves to the middle drum and then to the outer drum, undergoing additional drying in each pass. 3. Heat Source: - Heat is typically provided by a combustion system, such as a burner or furnace, located at one end of the drum dryer. The hot gases generated by the combustion process flow through the rotating drums, transferring heat to the material. 4. Air Flow: - The dryer is designed to optimize air flow through the drums, ensuring efficient drying. In a triple pass design, the material and hot gases move counter-currently through the three drums, enhancing heat transfer and drying efficiency. 5. Lifting Flights or Lifters: - Lifters are internal components inside the drums designed to lift and cascade the material as it rotates. This movement promotes good heat transfer and uniform drying. 6. Retention Time: - The triple pass configuration allows for an extended retention time of the material in the drying system. This longer exposure to heat enhances the drying efficiency, making the triple pass rotary drum dryer suitable for materials with high moisture content. Knedpjq Nfuzjfx Aafeb 7. Cooling Section: - After the material completes the three passes and reaches the end of the drum dryer, a cooling section may be included to reduce the temperature of the dried material before it is discharged. 8. Applications: - Triple pass rotary drum dryers are used in various industries, including agriculture (drying crops like grains), minerals (drying ores or concentrates), and biomass (drying wood chips or other organic materials). 9. Efficiency and Energy Consumption: - Triple pass rotary drum dryers are known for their high efficiency due to the extended drying time and effective heat transfer. However, they may have higher energy consumption compared to single or double pass dryers. When selecting a triple pass rotary drum dryer, it's essential to consider factors such as the type of material to be dried, required moisture reduction, and overall processing requirements. Proper design and operation are crucial to achieving optimal drying performance. Technical details We have different options for different requirements, please contact our team for more info.

Condition: used, Year of construction: 2008, total length: 15,000 mm, total width: 3,100 mm, total height: 3,150 mm, overall weight: 15,000 kg, Equipment: CE marking, No. 04553 Drum dryer / firewood drying system S&Ü SHT 50 Used, year of construction 2008 Suitable for drying firewood as well as other bulk and piece materials, e.g. wood chips, sawdust or compost Container volume 58 m3 Filling volume approx. 50 m3 of bulk material Drum diameter 2500 mm Overall length approx. 15000 mm Overall width approx. 2900 mm Empty weight approx. 12530 kg Loading via filling hopper, e.g. by wheel loader or conveyor system Internal conveying spiral for transporting and turning the drying material Drum drive via electric geared motor and multiple-chain drive Drum speed adjustable via frequency converter Automatic drying operation with timer control Fan speed adjustable via frequency converter Hydraulically liftable filling hopper for unloading Unloading by reversing the direction of drum rotation Drying time depending on initial moisture content, type of material, hot air volume and temperature Typical drying time for firewood approx. 5 - 7 days at approx. 200 kW heating capacity Heat exchanger: Max. heating capacity approx. 250 kW At 90 °C water supply temperature Medium flow rate approx. 12 m3/h At 15 °C outside temperature Hydraulic unit 3 kW Fan 7.5 kW Drum drive 8 kW Noise emission approx. 98 dB(A) with optimum filling level Current consumption 45 A Fuse protection 63 A Voltage 400 V, 3L/PEN Frequency 50 Hz Hydraulic oil capacity 10 l Transport dimensions approx. 15000 x 3100 x 3150 mm LWH Weight approx. 15000 kg Sale on behalf of customer, ex location near 63452 Hanau, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Ksdpsztrpzjfx Aafjnb Photos and videos serve as examples and do not represent the actual scope of delivery Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex location

Condition: as good as new (ex-display), Year of construction: 2025, warranty duration: 12 months, MP410EH30S Processing specifications: 4-sided Moulding Capacity Width 90-400mm Height 25-230mm Minimum material length 1m Maximum cutting depth 2mm 2-sided Moulding Capacity Width 90-400mm Height 25-230mm Minimum material length 1m Maximum cutting depth 5mm Kjdpfx Aezvcapsafjnb 1-sided Moulding or Thicknessing Capacity Width 90-400mm Height 25-230mm Minimum material length 1m Maximum cutting depth 5mm Cutterhead Specifications Upper Horizontal Cutter Diameter 122mm Width 510mm Power 11kW Speed 6000 rpm /min 50Hz Maximum cutting depth 5mm Lower Horizontal Cutter Diameter 122mm Width 510mm Power 11kW Speed 6000 rpm /min 50Hz Maximum cutting depth 5mm Vertical Cutters Diameter 122mm Maximum height 230mm Maximum diameter 142mm Power 5kW Speed 6000 rpm /min 50Hz Maximum cutting depth 5mm Maximum moulding depth 20mm Spindle diameter 40mm Feed Variable feed speed 5-18 m/min Smooth rollers 127mm Grooved rollers 28mm Soft roller 28mm Power / voltage Voltage / frequency 3 x 400 V, 50 Hz Total power 28.6kW Upper cutter 7.5kW Lower cutter 7.5kW Side cutters 5.5kW Upper feed 1.5kW Lower grooved feed 0.55kW Lower smooth feed 0.55kW Sawdust collector Port diameter 1x200mm 1x150mm Recommended fan power 10000m3/h

Condition: used, Year of construction: 1984, functionality: fully functional, power: 4.2 kW (5.71 HP), inner dimension length: 5,300 mm, inner dimension width: 750 mm, inner dimension height: 620 mm, control type: manual, actuation type: electric, fuel type: electric, Equipment: documentation/manual, We are offering this used Lauber I S-6 chamber dryer for drying wood, manufactured in 1984. Dimensions of the stacking chamber: 530 cm long, 62 cm high, 75 cm wide, 2.4 cubic meters, 4.2 kW. Cabinet with side carriage: complete dryer with carriage, high-performance radial fan, electric heating, intake and exhaust flaps, safety thermostat, spraying device, sufficient number of corrugated stacking strips, access doors, internal rails made of aluminum casting, external rail with plastic coating, manual control type A, built-in measuring unit with two wood moisture sensors and one climate sensor. Knjdpfjz Alhiox Aafob Fully automatic temperature and climate control of the entire drying process according to the pre-selected drying gradient, with two wood moisture sensors and one wood equilibrium moisture sensor. If you have any questions or require further information, please send us a message or call us. Inspection is welcome. Sale only to buyers who collect the item themselves! The sale is made with the exclusion of any warranty.

Condition: like new (used), Year of construction: 2012, Atlas Copco CD 70+ adsorption dehumidifier YOM 2012 Knedjyzaamepfx Aafsb Capacity: 4,200 l / min Pressure dew point: -40 ° C Pressure drop: 0.16 bar Maximum operating pressure: 14.5 bar Filter sizes: DD / PD 60 - DDp 60 Weight: 120 kg Dimensions: 550 (L) × 364 (W) × 1479 (H) mm inlet air temperature: 35 ° C ambient temperature: 25 ° C operating pressure: 7 bar

Condition: good (used), Year of construction: 2007, Mebor HTZ 1200 45kw motor 8m railway Kjdpfoz Abwgjx Aafonb Logs ramp conveyor

Year of construction: 2021, condition: new, functionality: fully functional, machine/vehicle number: sn: 1100056463, This is a miniature Büchi B-290 spray dryer (Mini Spray Dryer), a high-quality piece of equipment suitable for various laboratory processes. It is a reliable and efficient tool for your laboratory experiments. This device is designed to deliver consistent and accurate results with every use. Thanks to its excellent features, this spray dryer is ideal for the medical sector, laboratories, healthcare equipment and devices, dentistry, as well as industrial applications. It is a BÜCHI brand, model B-290 Mini Spray Dryer, serial number 100056463, year 2021; this equipment is NEW. Kedpfozgw Tlex Aafsnb Take advantage of this opportunity to acquire this exceptional tool and benefit from its convenience and performance. 💥 End-of-year clearance sale 💥

Condition: excellent (used), Year of construction: 2024, Wood-Mizer CNC5003 CNC Machining Center – practically unused Key data • Category: CNC machining centers / CNC routers for wood (nesting) • Year of manufacture: [2024] Knjdpsyr Dawofx Aafsb • Condition: practically unused, demo / showroom unit • Location: [KOŁO], Poland • Availability: 2 units in identical specification — discount available if both are taken • Sold directly by the manufacturer, no intermediaries Description An industrial-grade CNC machining center at a mid-range machine price. Why this machine is worth considering • Only premium, branded components — no generic parts: FANUC, HSD, HIWIN, ATLANTA, FESTO, BECKER. Each of these components is serviceable and supported worldwide, independently of us as the machine builder. • FANUC control — the world's most widely used CNC platform, standard ISO G/M code, ready to interface with any CAM system. Support, training, and service are available from any authorized FANUC partner or CNC integrator. • Gantry design with dual drive — high stability and accuracy, high-resolution digital servos, low vibration. • 3095 × 1535 mm working area accommodates a full 3050 × 1530 mm panel — an entire sheet is machined in one setup, with no pre-cutting and no repositioning. • 6-zone vacuum nesting table with 216 vacuum points — exceptional flexibility in work-holding: panels, irregular parts, and porous materials. • The machine is on-site and available for inspection and a test cut before purchase, along with the available technical documentation. Technical data Specification Value Actual working area X / Y 3095 × 1535 mm (max. raster table area) Z-axis travel 200 mm Rapid traverse X / Y / Z 60 / 30 / 15 m/min Spindle HSD 11 kW, HSK63F, 24,000 rpm, inverter-driven, ceramic bearings Tool changer ATC — 12-position carousel on the gantry, service access hatch Drives and guideways ball screw, linear guides, and carriages by HIWIN; rack and pinion by ATLANTA Control FANUC, ISO G/M code, PC and CAM interface, built-in server Table grey extruded polypropylene raster table; 6 zones × 36 points = 216 individual vacuum points, each zone with its own valve Vacuum pump BECKER, 126 m³/h, 4 / 5.5 kW, max. vacuum 0.9 bar Pneumatics FESTO Chip extraction articulated extraction hood Control panel movable, on wheels — access from 3 sides of the table; local operation or via network Frame size (footprint) 1570 × 4150 mm Total length / width / height 4460 / 3000 / 2400 mm Materials: wood, sheet materials, plastics, foam, composites, light alloys (aluminum). Terms of sale — stated openly • Sold as-is, without a manufacturer's warranty and without service support from our side — our CNC project has been discontinued. This is the only reason for this price. • Service and wear parts are available directly from the component manufacturers (FANUC, HSD, HIWIN, BECKER, FESTO) and from independent CNC integrators. • Inspection and a test run on-site are welcome — bring your own material and file. • Net price, EXW [KOŁO]. Loading is our responsibility; transport and unloading are the buyer's responsibility. Intra-community supply (0% VAT) for EU buyers with a valid VAT ID. • We can connect you with companies offering commissioning and operator training (third-party service, priced separately).

Condition: new, Year of construction: 2025, functionality: fully functional, power: 7 kW (9.52 HP), input voltage: 400 V, type of input current: three-phase, cutting height (max.): 120 mm, saw blade diameter: 400 mm, tilt adjustment saw blade: 45 °, height adjustment type: electric, actuation type: electric, Equipment: CE marking, saw blade guard, scorer, Efficient and precise cutting with high ease of operation thanks to the electromotive adjustment of the main saw blade (height/angle) and the parallel fence. Powerful motor, speed up to 5,000 rpm, scoring saw speed up to 8,000 rpm. Double roller carriage, the heart of the panel saw, smooth-running and durable. Cutting length max. 3,200 mm Safe operation thanks to proven safety devices. Equipment: Machine frame: Torsionally rigid and self-supporting guarantees the necessary smooth running and stability Control: PLC control Electromotive height adjustment and tilt 0-45° for the main and scoring saw blade via push and hold button. Saw unit: Powerful motors for excellent cutting performance Drive power/speed of the main saw spindle with automatic brake Main saw motor 7 kW, speed adjustment by switching over the drive belt, speeds 5,000 / 4,000 / 3,000 rpm Speed of the scoring saw 8,000 rpm Quick-change system for the main saw blade Saw blade angle is displayed numerically Double roller carriage: Linear, round guide rails ensure a precise and durable system with high-quality cutting results and a long service life Small rollers inside the carriage guarantee smooth sliding during cutting incl. upper carriage locking Carriage length 3,200 mm Parallel fence: max. width 1,250 mm with electromotive adjustment removable fence High-quality work table made of robust sheet steel guarantees high rigidity Safety zone starts approx. 200 mm in front of the saw blade Crosscut fence: Cross position of the panel is displayed numerically with telescopic device for cuts up to 3,100 mm and 90° guarantee Robust, gap-free flap units are easy to move Fence ruler is removable Cutting to length on the crosscut fence on the sliding carriage 3 digital displays with fine adjustment for high repeatability Display up to max. 3,200 mm Extraction: Knodpfx Aaoz Dwftsfsb to prevent flying chips and dust protects the operator from hazards Table extension and table widening Design: Clamping shoe, sliding stick, sliding and return handle Miter stop for manual mounting on the sliding carriage Technical data: Main saw: Saw blade diameter 400 mm, speed 3,000/4,000/5,000 rpm, motor 7 kW S1 Scoring saw: Saw blade diameter 120 mm, speed 8,000 rpm, motor 0.75 kW S1 Saw blade tilt 0-45° Max. cutting depth at 45°: 85 mm Max. cutting depth at 90°: 125 mm Parallel fence: max. 1,250 mm Sliding carriage: 3,200 x 418 mm Max. cutting capacity: 3,200 mm Height adjustment: electromotive Angle adjustment: electromotive Table size: 1,020 (690+720) mm Extraction: Diameter 100 mm Space requirement: 6,700 x 3,900 x 1,890 mm CE marking in accordance with EU directives including documentation and maintenance instructions Saw blades are not included in the scope of delivery.

Condition: as good as new (ex-display), Year of construction: 2024, warranty duration: 12 months, • 3 kW electric motor • Cutting height: 103 mm • Distance between the circular saw and the parallel guide: 800 mm • Sliding table length: 1100 mm • Sliding table width: 350 mm • Work table length: 900 mm • Overall table width: 950 mm Kedpfx Aezqz Dpoafonb

Condition: used, Year of construction: 2010, functionality: fully functional, type of input current: three-phase, cutting length (max.): 12,000 mm, cutting width (max.): 640 mm, saw drive: 15,000 W, input voltage: 400 V, wheel diameter: 600 mm, – Year of manufacture: 2010 TECHNICAL SPECIFICATIONS: – Motor: 15 kW Cutting dimensions: – max. log diameter: 95 cm – clearance between rollers: 73 cm – max. cutting width (square timber): 64 cm – max. cutting height above saw blade: 39 cm Kodpfx Ajy Na Hvjafonb – max. cutting length: 12 m Saw head equipment: – automatic cutting thickness adjustment device – electric head height adjustment: up/down – electric forward/reverse head feed: infinitely variable feed speed – electric saw blade guide arm – hydraulic sawblade tension system with air cushion – debarking unit Sawblade: – length: 4670 mm – width: 38 mm - 50 mm – sawblade guide wheels diameter: 600 mm – belt type: Z – material: cast iron The sawmill is equipped with full hydraulics: – hydraulic leveling system – side stops – material clamp – comb-type log turner – 3 loading arms Machine dimensions: – length: 1520 cm – width: 235 cm – height: 240 cm

Year of construction: 2024, condition: used, The control of the dust extraction system is switched on and off via 2 sensors. Knedozf N Ncepfx Aafeb Suitable for installation on an existing transport system Sword brush Micro-moistening of the brush elements by means of an antistatic moistening nozzle from Riepe. Moisturisation can be finely dosed via this nozzle. Cleaning the product surface using Sword Brush technology The dust particles are picked up by the brushes and removed by the suction system. A rotating squeegee and compressed air nozzles ensure constant cleaning of the brush systems. Power channel The power channel contains 14 rotating double power compressed air nozzles, which remove particles and dust from the material surface and from recesses. The suction system removes the loosened particles. Technical data: Power: 0.5 kW Self-cleaning system via the rotating brush Dust extraction: 2 x D120 mm at the top + 2 x D80 mm on the side. Motorised height adjustment Material of the panels to be cleaned: MDF, chipboard with melamine Workpiece length: min. 400 mm Panel width: max. 1,350 mm Workpiece height: max. 80 mm Feed speed: max. 35 m/min Removal standard: workpiece surface dust-free Important: Glue residues are not removed. Size of the machine: Width: 2,280 mm Installation length: 500mm

Condition: new, functionality: fully functional, Year of construction: 2025, overall weight: 750 kg, maximum load weight: 700 kg, Equipment: lighting, Suchen Sie nach einem gemütlichen Wochenendhaus, einem Büro im Garten oder einem zusätzlichen Raum für Ihre Familie? Unser einzigartiges Modell bietet die perfekte Lösung. Mit einem vierseitigen Dach und einer gehängten Metallfassade, die eine Lebensdauer von 30+ Jahren hat, bietet unser mobiles Haus höchste Qualität. Die hochwertige Aluminiumfenster sorgen für eine hervorragende Ästhetik und Funktionalität. Knjdpfjpxnpaex Aafsb Im Inneren erwartet Sie ein selbstnivellierender Holzboden, der mit Harz beschichtet ist, sowie ein Badezimmer mit Harz behandelten Holzplatten. Die Wände und Decken bestehen aus robusten Sperrholzplatten. Unser mobiles Haus verfügt über hochwertige Innentüren und modulares Beleuchtungssystem. Die Küche ist mit eingebauten Schränken und Geräten ausgestattet, während das Schlafzimmer über eingebaute Kleiderschränke verfügt. Das mobile Haus bietet hochwertige Schlüssel und Steckdosen sowie eine ausgezeichnete Boden- und Dachdämmung. Die Bodenisolierung ist aus Mineralwolle und beträgt 15 cm, die Dachisolierung 18 cm und die Außenwandisolierung 15 cm. Das Haus ist bereits für die Installation von Außenkameras, Klimaanlagen und Lüftungsanlagen vorbereitet. Es gibt Anschlüsse für eine Waschmaschine und Platz für einen Kühlschrank, eine eingebaute Fritteuse, einen Herd und einen Dunstabzug. Zahlreiche Steckdosen sind in der Küche, im Wohnzimmer, im Schlafzimmer und im Badezimmer vorhanden. Unser mobiles Haus bietet auch die Möglichkeit zur Installation von Photovoltaiksystemen auf dem Dach, um nachhaltige Energie zu nutzen. Lieferbar in 7-14 Tage! Verpassen Sie nicht die Gelegenheit, Ihr Traumhaus zu finden! Kontaktieren Sie uns, um weitere Informationen zu erhalten und Ihre Bestellung aufzugeben.