Used Suction System for sale (35,746)

Year of construction: 2002, condition: ready for operation (used), total width: 2,500 mm, total height: 8,400 mm, product length (max.): 2,250 mm, Dust extraction system manufactured in 2002. This LBH Suction system features a robust radial fan with a motor power of 22 kW and an impressive air flow rate of 13,750 m³/h. The filter area is 155 m², ensuring efficient dust removal with a residual dust content of less than 0.2 mg/m³. If you are looking to get high-quality dust extraction capabilities, consider the LBH Suction system we have for sale. Contact us for further details. • Return air/exhaust air (technical data): Nodeyn Nn Ejpfx Ab Uskw • Duct cross-section: 700 x 700 mm • Return air velocity: 7.5 m/s • Exhaust air velocity in workshop:

Condition: ready for operation (used), Year of construction: 2019, Two Ivat filter towers for dust and smoke with temperature control and nanofilter are available. Air volume flow: 22000-25000m³/h, motor power: 18.5kW, max. separation efficiency: 99.95%, filter area: 120m², filter cartridges: 4, machine dimensions X/Y/Z: approx. 2000mm/1500mm/3000mm, weight: approx. 1200kg. Documentation available. An on-site inspection is possible. Nsdpfxoyvuvlj Ab Uekw

Condition: used, Vacuum pump, ATEX, Elmo G400Capacity: 440 mbarVacuum manipulator + jib arm (max. 50 kg)Application: Handling bags and cartons Nsdpfx Abjyfw H Dj Uekw

Condition: good (used), Year of construction: 2003, Extraction unit as tabletop unit working area approx. 620 x 360 x 450mm large drawer to collect the sucked material Nodpfx Aboiwgbtj Uokw Control unit RE 1.5 for 5 different blower levels

Condition: used, Documentation Multievacuator Nkodpjx R Al Djfx Ab Ujw Additional information Pneumatic conveyor belt. Suction operation for powders or granules. The Multi-evacuator unit is a combination of blower and cyclone, designed for the suction of granular materials. The upper part, containing the impeller, can be opened for easy cleaning and replacement of the cyclone filter basket. The fan creates the necessary vacuum to draw the material from point A and discharge it through the cyclone via a rotary valve to point B, either directly or via a discharge line Capacity +/- 5 T/h depending on layout (see document). Motor: 3 kW Plan to provide a rotary valve. Available at extra cost.

Condition: ready for operation (used), Year of construction: 2009, A wood dust extraction and filtration system Krämer for saw lines is available. 1) Wood dust extraction unit Krämer VKA-P 100/650/55, air volume flow: 27000m³/h, pressure increase: 3800Pa, motor power: 55kW, V-belt length: 3550mm. 2) Filtration unit Krämer GFS Shake 160/25/250, filtration capacity: 30000m³/h, filter material: polyester needle felt, material discharge: TFS40/10/1.1. 3) Fan Krämer VFM-R 45/250/3, air volume flow: 3000m³/h, pressure increase: 2500Pa, motor power: 3kW. 4) Fan Krämer VFM-P 42/200/4, air volume flow: 2500m³/h, pressure increase: 3000Pa, motor power: 4kW. 5) Separator tank/filter hopper Krämer. 6/7) 2x axial fans. Including pipes and peripheral equipment. The motor flange on the discharge motor is defective. Documentation available. An on-site inspection is possible. Nodpfx Absxl Elgs Ujkw

Year of construction: 2014, condition: ready for operation (used), A mobile extraction and filter unit Höcker is available. Filter class: H3, motor power: 4kW, suction connection: 200mm, filter surface area: approx. 12m², max. volume flow: 3400m³/h, max. negative pressure: 2700Pa, collection container volume: 350l, machine dimensions X/Y/Z: approx. 2000mm/1100mm/2000mm, weight: approx. 420kg. On site inspection is possible. Nedpoyg Nu Nefx Ab Uskw

Condition: used, -Manufacturer: Sera -Type: Suction lance SL-02 Nkedpfx Asp Dt Thjb Usw -Length: 1000mm -Immersion depth: 980 mm -Volume flow: 200 l/h -Manufacturer: Sera -Type: Diaphragm feed pump -Power: 0.37 kW Volume flow: 120 l/h Permissible back pressure: 8 bar including digital level scale

Condition: good (used), Year of construction: 2014, Includes existing spare filters. Air volume 8000 m³/h Nkedpfx Ajx Uz A Ajb Usw Electronic connection value: 1.5 kW 400 V/50 Hz Width: 2000 mm Height: 1650 mm Depth: 1000 mm Weight approx. 120 kg

Year of construction: 2025, condition: new, Maintenance-friendly dedusting system specially developed for aggressive sandblasting dusts with pre-chamber impact separator, complete essentially consisting of: a) 1 cartridge dry filter, type PF 1.4.B62.00 5000m³/h (other sizes available) Nodpelxyhfsfx Ab Uekw each consisting of a stable, vacuum-tight 3 mm sheet steel housing, divided into the raw gas chamber with filter cartridges, filter pre-chamber impact separator and clean gas chamber with filter cleaning by means of compressed air, each with separate Easy Open maintenance door. Dust collection hopper with slotted valve for dust disposal using big bags. Solenoid valve control with differential pressure display for optimum adjustment of the filter cartridges - cleaning. Maintenance doors as swing doors Maintenance easy.

Condition: new, Year of construction: 2025, Maintenance-friendly dedusting system specially developed for aggressive sandblasting dusts with pre-chamber impact separator, complete essentially consisting of: Nksdpfx Asdrtaljb Usw a) 1 cartridge dry filter, type PF 2.16.B250 for 30,000m³/h (other sizes available) each consisting of a stable, vacuum-tight 3 mm sheet steel housing, divided into the raw gas chamber with filter cartridges, filter pre-chamber impact separator and clean gas chamber with filter cleaning by means of compressed air, each with separate Easy Open maintenance door. Dust collection hopper with slotted valve or rotary valve for dust disposal using big bags. Solenoid valve control with differential pressure display for optimum adjustment of filter cartridge cleaning. Maintenance doors as swing doors Maintenance easy.

Condition: used, Suction lifter load capacity: 220 kg System with two sliding bridges and two lifting motors. Rail length: approx. 25,500 mm Nkjdpfx Ajxcvh Teb Ujw System width: approx. 6,500 mm Height from floor to running rail: approx. 3,700 mm.

Condition: new, Year of construction: 2025, functionality: fully functional, Our powerful "MM 2010" sandblasting cabinet uses a pressure blasting process and, thanks to its innovative media recirculation system, is suitable for all types of blasting media. Thanks to the bucket elevator permanently connected to the cabinet, even the heaviest types of blasting media, such as stainless steel, cast steel, and other metallic media, can be used without any problems. Unlike competing systems, the blasting media is not sucked back into the cabinet, but rather transported to the adjacent bucket elevator via a flat conveyor system. The bucket elevator conveys the material upwards and throws it into the cyclone separator, where the blasting media is cleaned and returned to the blasting process. Our specially developed media recirculation recycling system ensures continuous media flow, regardless of the extraction system's suction power. Nksdpfxowc Nrns Ab Usw Thanks to the media recirculation system and the innovative fan technology, the blasting cabinet has very low energy requirements (0.75 kW fan motor). Since the blasting material is not sucked back in, no oversized extraction system with high power consumption is required (as with many competitive systems). To achieve maximum blasting performance, the "MM 2010" pressure blasting cabinet is equipped with a 60-liter pressure blasting tank. This is equipped with a pressure regulator for continuously adjusting the blasting pressure from 0.1 to 12 bar. For safe operation, a water separator is permanently mounted on the blasting tank, protecting the blasting media from moisture. The pressure blasting nozzle is made of highly wear-resistant boron carbide and allows a service life of up to 1,000 hours, depending on the blasting media used. The blasting chamber is equipped with a wear-resistant rubber lining, which increases the service life of the blasting media and protects the blasting cabinet from wear. An air blow gun is installed for cleaning the blasted workpieces and blowing off the cabinet walls. The permanently installed cartridge filter extraction system ensures optimal visibility in the blast chamber and maximum abrasive service life. The extraction system features continuous cleaning of the filter cartridges using compressed air blasts. This ensures a long service life of the filter media and consistently consistent extraction performance. The blast chamber is loaded via an angled front flap that swings completely upwards. This allows the blast cabinet to be loaded using a forklift or crane. The sturdy work grate can support a maximum load of 500 kg. To ensure optimal visibility in the blast chamber, two powerful and energy-saving LED lights are mounted on the cabin roof. Their roof-mounted design protects them from dust and wear. The system is operated via a modern touchscreen display. To ensure safe operation of the blast cabinet, the blast cabinet is equipped with a door safety switch. The installed viewing windows are made of toughened safety glass and are provided with a wear-resistant film.

Condition: good (used), Curved roller conveyor, curved track, curved roller conveyor, curved roller conveyor, curved roller conveyor, roller curve, curved conveyor with drive, roller track, roller curve conveyor, roller track, conveyor track, lightweight roller conveyor -Manufacturer: Soco System, non-driven roller curve conveyor, height-adjustable -Height: max. 710 mm -Rollers: Ø 48 x 15 mm -Number: 2x roller conveyor available -Price: per piece -Transport dimensions: 1470/600/H510 mm -Weight: 23 kg/pc. Nedpoyw Hwkjfx Ab Uekw

Condition: good (used), Curved roller conveyor, curved track, curved roller conveyor, curved roller conveyor, curved roller conveyor, roller curve, curved conveyor with drive, roller track, roller curve conveyor, roller track, conveyor track Njdpfx Absywu Azs Uekw -Manufacturer: Soco System, roller curve conveyor with drive, height adjustable -Rollers: Ø 54-80 x 355 mm -Speed: 14 m/min -Drive: 2x 0.12 kW, see photo of nameplate -Transport dimensions: 1500/600/H840 mm -Weight: 64 kg

Condition: excellent (used), RENISHAW System 3R-656.31-3 Macro probe with 3 mm stylus ball. Used. Fully functional. Nodpfx Abeyk T Hde Uekw

Condition: excellent (used), RENISHAW System 3R-656.31-5 Macro probe with 5 mm stylus ball. Used. Fully functional. Nkodpfeyk T Etox Ab Usw

Condition: excellent (used), 3 pieces Collet chuck adapter, 20 mm shank, equivalent to 3R-653 Mini holder chuck adapter 3R-653 for 20 mm shanks Nkodpfx Aow E Hiceb Uew Incl. drawbar Equivalent to: Manual chuck adapter, Macro-Mini, 3R-653 Incl. 3 pieces drawbar 3R-605.1E Unit price: €200

Condition: excellent (used), System 3R -772 DYNAFIX pallet Used Fully functional Njdpfxjyk T Rce Ab Ujkw

Condition: excellent (used), functionality: fully functional, We are offering various used 3R systems here. The systems are in very good condition and fully functional. Inspection by appointment is possible. System 3R - Presetting station measuring plate (granite plate) on base cabinet System 3R-US060 Including guide rail (reference element WEDM) 350 mm long Granite plate by MYTRI (accuracy 0.003 mm) Dimensions: 747 x 717 x 895 mm Weight: 158 kg Nksdpfjyi T Nvox Ab Ujw - Including WEDM 3R-272 HP pendulum head for mounting SuperVice vise, holder or fixture in the WEDM system. - Including SuperVice Magnum 3R-292.6HP vise - Including Magnum WEDM 3R-26610 pendulum head See pictures Shipping and inspection possible!

Condition: excellent (used), functionality: fully functional, We are offering a used System 3R-217-1 Marco Block here. The chuck is in very good condition and fully functional. Viewing by appointment possible. Shipping and viewing available! Nkodpfjxphvcsx Ab Uew

Condition: new, table length 2400 mm table width 1200 mm table height 200 mm bore 28 mm weight 950 kg Equipment: - 4 feet - basic equipment 650 mm - high-quality steel S355J2+N + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Hole Ø 28 mm - Drill holes surface 100x100 mm grid Nkedpfx Aboyxhh Hj Usw - Corners, edges and drill holes rounded - Side panel height 200 mm - Hole spacing side panel 50 mm - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise superstructures

Condition: used, table length 2400 mm table width 1200 mm table height 200 mm bore 28 mm 100 x 100 mm Nodpsyxhhyjfx Ab Uokw material thickness ca. 24,5 - 27 mm 200 mm work height max. 850 mm Weight 980 kg Special item - The drill pattern on all side rails is offset downwards by approx. 1 mm. The clamping dimension for angle or table-to-table connection is not specified. >. - high-quality steel S355J2+N + plasma nitriding - Drill holes in side panel in diagonal grid - Corners, edges and drill holes bevelled 45 - Construction reinforced by ribs - incl. base basic equipment 650 mm

Condition: new, table length 2000 mm table width 1000 mm table height 300 mm bore 28 mm weight 830 kg Equipment: - 4 feet - basic equipment 650 mm - high-quality steel S355J2+N + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Hole Ø 28 mm - Drill holes surface 100x100 mm grid - Corners, edges and drill holes rounded - Side panel height 200 mm - Hole spacing side panel 50 mm Njdpfx Asyxhhtob Uekw - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise superstructures

Condition: excellent (used), Width: 450 mm length: 1000 mm space requirement: 1050 x 550 mm Nkedpfx Absd E Ucto Uew height adjustable: 620 - approx. 1000 mm