Used conveyors / conveying systems for sale (185)

Condition: used, Roller conveyor + cross conveyor + roller conveyor Hedpfx Amsk Ritpoisl good technical condition

Condition: used, Feed unit with 6 drum motors Round motor Hedpfx Ajq E Ipbjmiel Motor roller Drum motor

Condition: used, heavy duty roller conveyor for buffering laminated beams or as a heavy-duty roller conveyor Hedpfsk Iugljx Amisl from length 6 m up to a length of 84 m >also suitable for steel transport etc

Year of construction: 2017, condition: used, Used machine Year of manufacture: 2017 The Barbaric TSRET04 return system is a workpiece return unit for edge banding machines. It is the most basic version in the TSRET series and serves the following functions: - Transfers the workpiece at the end of the edge banding machine - Returns the workpiece to the height of the infeed of the edge banding machine Functionality After passing through the edge banding machine, the workpiece moves onto a roller table. The transfer is carried out by belt conveyors moving perpendicularly to the conveying direction, which rise from the roller table, lift the workpiece, transport it sideways, and set it down on a slightly lower roller table. This roller table conveys the workpiece to a belt conveyor. At the end of the belt conveyor, a non-driven, slightly inclined roller conveyor toward the edge banding machine’s infeed is connected. A stopper halts the workpiece at the end of the roller conveyor. Technical data - Max. load capacity: 60 kg - Max. panel size: 2,800 x 1,300 mm - Cycle time: max. 11 pieces/min Dimensions: - Return: 2,293 x 1,961 mm - Conveyor belt (L x W): 2,500 x 800 mm - Roller conveyor (L x W): 2,000 x 800 mm - Total length: approx. 6,943 mm - Total width: approx. 2,239 mm Availability: short-term Location: Flörsheim Hjdpfsx Rpgbex Amiel

Year of construction: 2025, condition: new, Vacuum lifters BARBARIC swiveling, including hoists, equipment package consisting of: -Vacuum lifters of uniWood B3-90 degrees - 250 comfort version, with integrated chain hoist increased load capacity: 250 kg Suitable for the vertical and horizontal transport of flat standard plates. Vacuum generation is pneumatically by means of ejector. For lifting of permeable materials (MDF of 8 mm thick), which is Reinforced Vakkumpumpe installed. -Technical data- Chain hoist lifting speed: 0-10 m / min stepless by frequency converter Hodpfoc Umftjx Amijl Lifting height (operating range): 2.0 m Length of chain: approx. 3.5 m operating voltage: 230 V / 50 Hz Operating pressure: 7 bar filtered compressed air required Weight: ca. 85 kg -Security system - the lift is equipped with a vacuum gauge. Release the load by means of 2 buttons -Hoists BARBARIC Load capacity 250 kg to the hoist Consisting of: Column, console and smooth-running boom. Delivery including Schiebefahrwerk and energy supply. Height: approx. 4, 2 m Bottom bracket: approx. 3.5 m Throat depth: 5 m Swivelling area approx. 250° Panning and cross travel by hand Base plate with 700 x 700 mm and mounting material. Supplied with adhesive anchors for concrete floor. This fixture requires a similarly proven concrete floor. The static verification of soil is on site to do and accordingly to document. Others

Condition: excellent (used), Opportunity from liquidation: Automation by Wemhöner was installed on a Weinig, including control system. Hjdsw S E Ezspfx Amiel

Condition: used, Tilt hoist Hydraulic Without roller conveyors Used for packs till 6 m Hjdpfx Ajykrmiomisl

Condition: used, Belt conveyor Manufacturer: Vretstorp Country of manufacture: Sweden Hjdpfx Aeykn Ivemiel Length: 16m Width: 780 mm Electric motor: 5.5 kW

Condition: new, Board separator conveyor Hjdpfx Ajyknpmsmiel Outfeed after HewSaw Manufacturer / model: Drive experts UK CA Type: 3E100L4D-FC-A0-D36 Power: 3.0 kW RPM: ~1450 rpm (50 Hz) ~1750–1760 rpm (60 Hz)

Year of construction: 2026, condition: new, With the separation of milled lumber, laid loose or as a package, already milled lumber can be processed economically. In a two-stage process, the lumber is separated for further processing. It is also possible to insert the separated lumber in a controlled manner in a running process. Hedpfx Amjg Rxhgsisl The feeder is mechanically designed in such a way that even crooked logs can be fed in safely. In addition, it can be adjusted to the diameter of the wood so that only one piece is transported further, thus avoiding stoppages in the further process.

Condition: used, Belt conveyor (IDL000956) Hsdpfx Ameykab Uoisl Length: 15.5 m Belt width: 1000 mm Electric motor: 5.5 kW

Condition: used, Belt conveyor (IDL000955) Length: 16 m Belt width: 800 mm Belt type: Needle Electric motor: 5.5 kW Hsdpfx Aeyi U Sxjmiel Motor drive via reducer on belts

Condition: ready for operation (used), functionality: fully functional, controller manufacturer: Klöckner-Möller und SPS-Siemens, workpiece length (max.): 2,500 mm, workpiece width (max.): 850 mm, workpiece weight (max.): 50 kg, stack height: 1,200 mm, Auction of a Feeding and Stacking System for the Furniture Industry! Bargstedt TBH20/ER/25/08/S (Single-Sided Feeding Station, Machine No. 0-280-07-7582) - 1 powered stacking roller conveyor - 1 lift table with powered stacking roller conveyor - 1 vacuum suction carriage (minimum workpiece dimensions: 280 x 230 mm) - 1 stripper plate - 1 central thickness adjustment for the suction carriage - 1 height-adjustable belt conveyor - 1 infeed roller track with inclined supporting rollers - Suction beam (2-lane operation, max. 4 parts in sequence) TECHNICAL DETAILS Stack height: 1200 mm Stack changeover time: 35 sec Max. basic output: 17 cycles/min Max. workpiece weight: 50 kg Workpiece length: 600 - 2,500 mm Workpiece width: 300 - 850 mm MACHINE DETAILS Control system: Klöckner-Möller and Siemens PLC Total connected load: 14 kW Compressed air consumption: 81 NL/min Operating pressure: 6 bar Bargstedt TDK 10/25/10 (Turning Station, longitudinal to crosswise, Machine No. 0-282-07-7584) TECHNICAL DETAILS Roller diameter: 65 mm Roller pitch: 125 mm Max. workpiece weight: 50 kg Feed rate: stepless from 10 to 50 m/min Hedpfxsyg Hais Amiol MACHINE DETAILS Total connected load: 2 kW Compressed air consumption: 27 NL/min Operating pressure: 6 bar Bargstedt TDK 10/25/10 (Turning Station, crosswise to longitudinal, Machine No. 0-282-07-7585) TECHNICAL DETAILS Roller diameter: 65 mm Roller pitch: 125 mm Max. workpiece weight: 50 kg Feed rate: stepless from 10 to 50 m/min MACHINE DETAILS Total connected load: 2 kW Compressed air consumption: 1 NL/min Bargstedt TSH20/ER/25/08/S (Single-Sided Stacking Station, Machine No. 0-281-07-7589) - 1 height-adjustable single sheet transport - 1 vacuum suction carriage (minimum workpiece dimensions: 280 x 230 mm) - 1 central thickness adjustment for the suction carriage, adjustable to board thickness for board transfer - 1 lift table with powered stacking roller conveyor - 1 powered stacking roller conveyor, located behind the stacking station - Suction beam (2-lane operation, max. 4 parts in sequence) TECHNICAL DETAILS Stack height: 1200 mm Stack changeover time: 35 sec Max. basic output: 17 cycles/min Max. workpiece weight: 50 kg Max. workpiece length: 2,500 mm MACHINE DETAILS Control system: Klöckner-Möller and Siemens PLC Total connected load: 14 kW Compressed air consumption: 81 NL/min Operating pressure: 6 bar

Year of construction: 2021, operating hours: 9,000 h, condition: used, machine/vehicle number: 2202417-258, We offer a used Barbaric LCV loading system. Type: Beschickung LCV Year of manufacture: 2021 Load capacity at -0.6 bar: 200 kg Feeding system with 3 infeed/loading positions. Total length of working traverses: 17 m. Serial number: 2202417-258. Hodpfx Asyi Akismisl Transport at buyer’s responsibility. If you have any questions or require additional information, please feel free to contact us by email.

Condition: used, machine/vehicle number: 007802, Max. panel width: 1000 mm Max. panel length: 2000 mm Length of conveyor: 8200 mm Hodpfx Amoxn Nf Noiel Panel return for edgebander: Right

Condition: used, machine/vehicle number: 008147, Max. panel width: 1100 mm Hedpfxexqm Hij Amiol Max. panel length: 2500 mm Length of conveyor: 8100 mm Panel return for edgebander: Right

Condition: used, machine/vehicle number: 008364, Max. panel width: 1000 mm Max. panel length: 2500 mm Hjdpfxox Swc Ts Amijl Length of conveyor: 6550 mm Panel return for edgebander: Right

Condition: used, Year of construction: 2003, feeder rollers, transfer belts for 6 meters, retractable forks, lift tables with rubber-coated parcel drive chains, outfeed chains Hjdpfxjycxtye Amiel

Condition: used, Various roller tracks Rollers mounted on rails Transport rails Hjdpfx Ajq E Rybomisl Carrying rollers Roller track Small-roller rail

Condition: excellent (used), Perthometer Roughness measuring instrument Brand: Mahr Model: S3P Consists of: Steel measuring plate Hodpfxoxlzu Rs Amisl Cross table Perthometer PRK feed unit Various measuring tips Standard geometry PGN1

Condition: new, functionality: fully functional, A new log step feeder will be made to order based on your technical requirements. Hsdpfx Amsyfmn Reisl

Condition: good (used), BREVETTATO 3-roller feed Specification: • condition - used • manufacturer - BREVETTATO • 3 pulling rollers with dimensions 120x48 Hodpfx Ajvrzl Temiol • forward/reverse rotation • speed regulation with a switch and on the gears • motor powered by 380V current (3 phases) • 4 working speeds in the range from 3.0 to 23.0 m/min • weight approx. 70 kg Additional information: • good technical condition • the photos presented show the actual condition of the item for sale • possibility of switching on and checking the device on site • the price given in the auction does not include VAT and transport costs

Year of construction: 2007, condition: ready for operation (used), functionality: fully functional, workpiece length (max.): 2,000 mm, workpiece width (max.): 800 mm, conveyor belt length: 5,700 mm, Equipment: CE marking, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. workpiece width: 800 mm Min. workpiece length: 140 mm Max. workpiece length: 2,000 mm Conveyor length: 5,700 mm MACHINE DETAILS Hedsxxafbepfx Amiel Dimensions (L x W): 5,700 x 1,000 mm EQUIPMENT Return system for edge banding machine, left side Panel ejection with table and air curtain Panel feed with motorized conveyor belt CE marking

Year of construction: 2005, condition: ready for operation (used), functionality: fully functional, workpiece length (max.): 2,400 mm, workpiece width (max.): 800 mm, conveyor belt length: 10,000 mm, feed rate X-axis: 30 m/min, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum panel width: 800 mm Minimum panel width: 300 mm Maximum panel length: 2,400 mm Conveyor length: 10,000 mm Maximum feed speed: 30 m/min EQUIPMENT Hjdpsxxab Asfx Amiol Part return for edge banding machine on the right Bench with air curtain

Condition: used, machine/vehicle number: 005607, Max. panel width: 2400 mm Max. panel length: 2500 mm Hodpfx Amsx A Tlvsiol