Used Ifa Adk 125 for sale (4,058)

Condition: excellent (used), Year of construction: 2018, operating hours: 10,000 h, Weinig production line CONTUREX C 125 Year of manufacture: 2018 Approx. 10,000 operating hours Dedsy Emrkjpfx Aarowd Technical data and more images available upon request.

Year of construction: 1978, condition: used, We offer this used Doebeli OP 125 optical profiling machine, model OP 125x102, manufactured in 1978. Machine number: OP 125x102 Dwedpfez Dg A Uex Aared Year of manufacture: 1978 Supply voltage: 380 V Frequency: 50 Hz Phases: 3 If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2015, EXTRUSION HEAD G+G 125 PE-PP PIPE HEAD + COLOR STRIPE Last application: PE pipes for drinking water with color stripe System: WENDELVERTEILER Year of manufacture: 2015 Max. diameter: 125 mm Min. diameter: 20 mm Dwedpe Ad Nvwsfx Aared Max. output: 600 kg/h, depending on wall thickness and diameter Condition: Very good condition, ready for operation The pipe head is my property. Location: D-26345 Bockhorn-Grabstede, Germany.

Condition: used, Year of construction: 2006, machine/vehicle number: OTW, Schmalz vacuum lifter with a load capacity of 125 kg Dimensions: 180x80 cm, suction pads are fully adjustable. These are porous and should be replaced. 4 suction pads, each with a diameter of 140 mm Connection: 400V 16A Dwjdpsy Hf Itefx Aared Good condition, see pictures Item location: 75053 Gondelsheim Shipment via freight carrier or collection by appointment only

Condition: used, mileage: 19,578 km, power: 92 kW (125.09 HP), first registration: 03/1988, fuel type: diesel, overall weight: 9,700 kg, axle configuration: 2 axles, color: red, gearing type: mechanical, total width: 2,500 mm, total height: 3,000 mm, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle today, subject to prior sale, errors, and omissions: IFA W 50L LF fire engine with double cab, pump, and tank First registration: March 10, 1988 19,578 km (original) Engine: 6,560 cc 92 kW / 125 hp Permissible gross vehicle weight: 9,700 kg, unladen weight: 81.50 kg, payload: 1,550 kg Overall length: 7,700 mm x overall width: 2,500 mm x overall height: 3,000 mm Double cab, 2 seats in front, 7 in the back 2 rotating beacons in front, 1 on the passenger side in the back + 1 flashing light on the left and right in the back, on top Towing eye in front Power connection/supply connection on the passenger side in front 2 hose holder housings on top, walkable roof rack 2 water connections on the driver's side and passenger side in the back, 1 in the back Water tank under the vehicle Hose reel Complete pump unit Trailer hitch Hose reel holder in the back Work spotlights in the back, on top 2 seats in front, 10 seats in the back 5-speed manual transmission Manual roof Auxiliary heater Siren Good overall condition Price: €5,500.00 (VAT not shown) Dods Aibzrspfx Aarowd All information is provided without any guarantee or warranty. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties is the local court of Ludwigslust for disputes up to €10,000, and the regional court of Schwerin for disputes exceeding this amount. Subject to errors, omissions, and prior sale.

Condition: excellent (used), Year of construction: 2013, Saacke TEMINOX GLS 125-45 dual-fuel burner 10500kw, oil+gas. Year of manufacture 2013. Dwedpfx Aovrkcnjarjd

Condition: used, Make: Kemper Model: SP A Size: 125 Factory number: 6710424 Flour capacity: 125 kg, Dough capacity: 200 kg, 2 speeds, Dwjdpfx Aaszux U Hjrod Includes 2 mobile mixing bowls The machine is sold as shown in the pictures.

Condition: used, Used chamber filter press Andritz/Netzsch 1500x2000 with 97 plates Quantity: 2 available Number of plates can be increased to 117 Plate thickness: 78 mm Press dimensions: Length: 13455 mm x Width: 3125 mm x Height: 4635 mm Empty weight: 51600 kg Filter area: 459 m2 Filter area after expansion: 559 m2 Press volume: 4989 l Press volume after expansion: 6080 l Dsdpfjzlb D Sjx Aarswd Cake thickness: 25 mm

Condition: used, Year of construction: 2001, This KRAUSS MAFFEI injection molding machine, model KM 125-390 C2, will be auctioned off online in our industrial auction / machinery auction, Aumovio Germany GmbH - Step 2 - Injection molding machines, temperature control units, storage racks, and various other items. Dwjde Aiqlvjpfx Aarjd You can find this and many other items on our platform.

Year of construction: 2021, condition: used, For enquiries regarding the attachment, Mr. Herden will be happy to assist you (by telephone). Djdpfxjyix Iqo Aarewd Westtech Woodcracker G1250 Root Rake / incl. grab arms / in stock & available immediately / Year of manufacture: 2021 Price: €14,890.00 net / €17,719.10 gross - Working width (mm): 1,250 - Own weight (kg): 1,420 - Recommended oil flow (l/min): 50 – 90 - Recommended operating pressure (bar): 200 – 250 - Carrier vehicle operating weight (t): 15 – 22 Equipment: - Incl. grab arms Optional: Volvo S60 adapter plate incl. bolts and installation = €1,500.00 net Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) are in stock and available immediately. We have a wide selection of various Westtech products in stock and available immediately! Mr. Herden (Tel.) will be happy to assist you. On request, we are also happy to provide you with a financing offer. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official Magni telehandler sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete range of Westtech Woodcracker products! Subject to errors and prior sale! Internal no.: 621068 = More information = New: No Intended use: Construction Unladen weight: 1,420 kg Contact Marius Herden for more information.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: Fabr. / Serien Nr. 12.16.0072, Year of construction: 2016, operating hours: 6,250 h, total length: 2,000 mm, total height: 1,400 mm, total width: 1,100 mm, type of input current: three-phase, overall weight: 800 kg, input voltage: 400 V, input current: 32 A, shaft length: 1,070 mm, temperature: 200 °C, compressed air connection: 8 bar, input frequency: 50 Hz, laser power: 400 W, ambient temperature (min.): 10 °C, ambient temperature (max.): 35 °C, electrical fuse: 32 A, table width: 125 mm, tank capacity: 25 l, table length: 125 mm, repeat accuracy: 0.001 mm, Equipment: cooling unit, Manufacturer: SLM Solutions GmbH Type: SLM 125 HL Manufactured / Serial No.: 12.16.0072 Year of manufacture: 2016 Weight: 800 kg Dimensions: Length x Width x Depth in mm (2,000x1,400x1,100) Documentation: yes Accessories: Spare parts such as flanges, pipe sections, substrate plates, coating lips, powder containers or bottles (photos available upon request) Special features: Compressed air 7-8 bar, inert gas (argon or nitrogen) 5 bar and cooling water are required for operation. Dwodpfx Aaey Uzcijrjd Used SLM Solutions SLM 125 HL system for processing reactive and non-reactive powder materials. Stainless steel and aluminum (other materials possible) have been processed on this system. Design of process chamber, handling station, and powder extraction system in accordance with ATEX Directive II for flammable materials. Build volume (L x W x H): 125 x 125 x 125 mm (less substrate plate height) Build volume reduction (L x W x H): 50 x 50 x 50 mm (less substrate plate height) 3D optics configuration: Single (1x 400 W) IPG fiber laser Build rate: up to 25 cm³/h Variable layer thickness: 20 μm - 75 μm, 1 μm increments Min. feature size: 140 μm Focus diameter: 70 μm - 100 μm Max. scanning speed: 10 m/s Average protective gas consumption during build process: 0.6 l/min (argon) Average protective gas consumption during flood process: 70 l/min (argon) Electrical connection / power consumption: 400 Volt 3NPE, 32 A, 50/60 Hz, 3 kW Compressed air requirement / consumption: ISO 8573-1:2010 [1:4:1] 7 bar

Condition: used, Spiral mixer with 2 or 3 removable bowls • Capacity: 125 kg of flour • Dough capacity: 200 kg • Bowl capacity: 300 liters • 2 or 3 removable bowls • 8 machines available • Large stock of additional bowls Machines are in good working order, imported from Germany. Price of a machine with 2 bowls: 8,000 EUR Dsdpfx Aajy Ukirsrowd We also offer a wide selection of used bakery and confectionery equipment. Please contact us – communication is possible in English, German, and Russian.

Condition: like new (used), Year of construction: 1994, operating hours: 606 h, functionality: fully functional, center height: 125 mm, spindle bore: 28 mm, input voltage: 400 V, spindle nose: D1-3, type of input current: three-phase, spindle speed (max.): 5,000 rpm, input current: 16 A, input frequency: 50 Hz, overall weight: 1,500 kg, # FOR SALE: SCHAUBLIN 125 CCN – FANUC 20T – LIKE NEW Very exclusive Schaublin 125 CCN CNC lathe in exceptionally good condition! For sale: a beautiful Schaublin 125 CCN, equipped with the reliable Fanuc 20T CNC control system. This high-quality Swiss precision lathe has only 600 operating hours and is in absolute like-new condition. The Schaublin 125 CCN is known for its exceptional accuracy, high-quality finish, and solid Swiss engineering. An ideal machine for precision machining, fine mechanical work, and toolmaking. ### Key Features - Brand: Schaublin - Type: 125 CCN - Control System: Fanuc 20T - Operating Hours: Only 600 hours - Condition: Like New - Origin: Swiss top quality - Type: CNC precision lathe ### Special Features Dwodpfx Aae Agfwiored A Schaublin 125 CCN with so few operating hours and in this condition is a rare find. A unique opportunity for enthusiasts or professionals looking for a high-quality precision lathe with minimal signs of wear. Seriously interested? Feel free to contact us for more information, photos, or to arrange a viewing. Price: upon request.

Condition: used, Year of construction: 1980, functionality: limited functionality, machine/vehicle number: 4119, travel distance X-axis: 1,450 mm, travel distance Y-axis: 365 mm, travel distance Z-axis: 415 mm, total width: 3,400 mm, total length: 4,200 mm, overall weight: 3,500 kg, Last major overhaul in 2006 Swiveling spindle head, 360° Control: Digital display Clamping area: 1800 x 400 mm Table load: 1000 kg Travel in the longitudinal direction: 1450 mm Travel in the transverse direction: 365 mm Travel in the vertical direction: 415 mm Spindle connection: SK40 Spindle speed: 31.5-45-63-90-125-180-250-355-500-710-1000-1400 rpm Feed rate in the longitudinal direction: 8-1200 mm/min Feed rate in the transverse direction: 8-1200 mm/min Feed rate in the vertical direction: 4-600 mm/min Spindle drive: 7.5 kW Feed motor: 3.2 kW Coolant pump: 0.18 kW Hydraulic system: 0.37 kW Total connected load: 12 kVA Weight, approx.: 3500 kg Space requirement, approx. (L x W): 4200 x 3400 mm Technical data subject to change without notice. Errors and prior sale excepted. Dsdoz Nfbzepfx Aarowd

Condition: used, Year of construction: 2014, functionality: unexamined, input voltage: 400 V, input current: 32 A, input frequency: 50 Hz, type of input current: three-phase, temperature: 125 °C, number of chambers: 1, We offer two used CATALYTIC DEBURRING OVENS, 125°C, Zahner Electronic, manufactured in 2014. The ovens were purchased with the intention of using their components as spare parts. They have never been put into operation. Nothing has been disassembled. Year of manufacture: 2014 Rated frequency: 50 Hz Rated voltage: 3L, N, PE 3×400 V AC Degree of protection: IP40 Control voltage: 24 V DC Dwedpfjzq Ax Uox Aared Rated current: 32 A Short-circuit current Icp: 10 kA Peak short-circuit current Ipk: 17 kA Type testing: not type tested Touch protection: for trained personnel. The stated price is for two units. If you have any questions or require additional information, please send a message or contact us by phone.

Condition: excellent (used), For sale: industrial centrifugal pump KSB ETABLOC-GN 40-125/402 with a 4 kW electric motor. Pump specifications: • Manufacturer: KSB • Model: ETABLOC-GN 40-125/402 • Design: GN11 • Identification number: 48861800 • Pump number: 5-925-204029/1 • Flow rate: 31–59 m³/h • Head: 25–17.5 m • Pump speed: 2900 rpm Motor specifications at 50 Hz: • Motor type: QU FA 112M2A-60 • Motor number: 243866 HU • Power: 4 kW • Power supply: three-phase • Frequency: 50 Hz Dsdpfx Aaez Snulsrowd • Speed: 2850 rpm • cos φ: 0.91 • Protection class: IP55 • Insulation class: F • Operating mode: S1 Condition: used.

Condition: excellent (used), Year of construction: 2014, operating hours: 23,000 h, functionality: fully functional, For sale: a used Moba Omnia 125 XF egg grader built in 2014, inline configuration (left-hand machine) and in very clean condition. Always maintained by the dealer, ready for production; no overhaul is needed. Available from April 2027. The machine connects directly to the poultry house, grades the eggs by weight and packs them automatically. Complete with candling booth, case discharge and SOCO case taper, fitted with the optional long end conveyor and the latest MMI software. Technical specifications: - Brand / model: Moba Omnia 125 XF - Year of manufacture: 2014 - Capacity: 45,000 eggs per hour (125 cases per hour) - Running hours: 23,000 - Packing lanes: 8 - Closers: 4 - Configuration: inline, left-hand machine - Software: latest MMI software - End conveyor: long end conveyor (option) Dwjdpsz R E Ahofx Aarsd - Candling booth: yes - Case discharge: conveyor with 90-degree curve - Case taper: SOCO - Inkjet printers: not included - Label printers: not included, negotiable - Condition: very clean, dealer maintained - Available: from April 2027 Delivery and installation: we can handle dismantling, transport and installation, in the Netherlands and worldwide. Price on request.

Condition: used, Year of construction: 2014, controller manufacturer: Heidenhain, controller model: iTNC 530, _____ Description: Year of manuf. : 2014 Control : Heidenhain iTNC 530 Speed : 12000 rpm Movement X/Y/Z : 1250/1250/1000 mm Tool holder : HSK-A100 Spindle: Technology:Motorspindle Speed:12.000 rpm Power:52 kW Torque:430 Nm Taper:HSK-A100 Cooling:Switching Coolant/Blow air NC-Swivelhead: Technology:Universal millinghead B-Axis:0,001° Swivelrange:-30°/+180° NC-Roundtable: Technology:Roundtable with Palletcarrier C-Axis:0,001° Djdpfxs Ah Adio Aarowd Clamping surface:1.000 x 800 mm Tableloading (max.):2.000 kg In general: Toolmagazine:Chainmagazine (2 chains), 240 Stations Rapid travers in X/Y/Z:60 m/min Equipment/Accessory: Positionsensor:Direct scales in all Axes Chipmanagement:Chip conveyor Coolingmanagement:Internal cooling unit with paperbeltfilter, temperature control and Highpressure, 80 bar Workpiecemeasurement:Infrared-Touchprobe, m&h IRP 25.41 Toolmeasurement:Laser, BLUM NT Automation:Palletchanger, 2-fold Oilmistseparation:Interface mechanical prepared Processobservation:Operation mode 4 Setup operation:Electronic handwheel Further Accessory:ROTO-Clear, Rinsing pistol

Condition: used, functionality: fully functional, Year of construction: 2011, machine/vehicle number: 606411, cutting range flat at 90° (X-axis): 600 mm, cutting range flat at 90° (Y-axis): 15 mm, cutting range square steel at 90°: 50 mm, cutting range round steel at 90°: 55 mm, cutting range angle steel at 45° (X-axis): 80 mm, cutting range angle steel at 45° (Y-axis): 10 mm, cutting range angle steel at 90° (X-axis): 150 mm, cutting range angle steel at 90° (Y-axis): 18 mm, sheet thickness (max.): 13 mm, Equipment: foot remote control, We offer this used Kingsland Multi 125 shearing machine for profiled steel, manufactured in 2011. Year of manufacture: 2011 Punching – dimensions: 35 × 25; 57 × 16; 30 × 20; 38 × 15 mm Bending capacity for flat bar: 250 × 22 mm Shearing of flat bar: 380 × 25; 600 × 15 mm Shearing of angle profile at 90°: 150 × 18 mm Shearing of angle profile at 45°: 80 × 10 mm Cutting of round bar: up to Ø 55 mm Cutting of square bar: 50 × 50 mm Cutting with extra blades: up to 200 mm Notching – rectangular: 60; 100 mm Dwsdpfx Asz D Tf Asared Notching with additional tools: 80; 90 mm Maximum material thickness: 13 mm If you have any further questions or require more information, please send us a message or call us.

Condition: good (used), Year of construction: 2016, 1 used 4-station clamping tower Manufacturer: ALLMATIC Number of clamping devices: 4 Clamping device: ALLMATIC NC machine vises Jaw width: 125 mm Clamping system: Mechanical NC clamping system Application: CNC milling machines and machining centers Dwsdpfx As Ah Dyroarjd Suitable for multiple clamping and series production Special advantages Four-fold clamping for high productivity Optimal utilization of the machine work area Reduction of setup and downtime Robust and high-quality ALLMATIC design Ideal for single-part and series production Flexible workpiece clamping for various machining tasks Scope of delivery 1 × ALLMATIC 4-station clamping tower 4 × ALLMATIC NC vises, jaw width 125 mm

Condition: excellent (used), Professional digital micrometer from the renowned Mahr brand – model Micromar 40 EWR(i) – designed for extremely precise measurements with an accuracy of up to 0.001 mm. The device, in an IP65 version that is dust and water-resistant, is ideal for use in metrology, quality control, and industrial workshops. Measurement range: 100 – 125 mm Accuracy: 0.001 mm Digital display with a large, clear LCD screen Protection rating: IP65 – dust and splash resistance “ABS” and “Hold” functions – quick measurement stop and zeroing function Dwjdpfx Aoz Slhnsared High-rigidity body, ergonomic grip Includes original box, certificate, operating manual, and 100 mm measuring standard Condition: practically new / used only for testing

Condition: excellent (used), Year of construction: 2020, machine/vehicle number: 020020, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, suction capacity: 4,500 m³/h, total height: 2,000 mm, total length: 2,000 mm, total width: 1,000 mm, overall weight: 280 kg, For sale is a fully functional industrial dust extraction unit from HOLZING / MÜNALSAN, model RLA 125 VIBER. The unit is used, in good technical condition, and fully operational. It is ready for further use. The dust extraction unit is designed for industrial applications, including the extraction of dust, wood chips, and other contaminants generated during material processing. Technical data: Manufacturer: KMA Maszyny / MÜNALSAN Type: RLA 125 VIBER Year of manufacture: 2020 Serial number: 020020 Motor power: 3 kW Power supply: 400 V Frequency: 50 Hz Maximum capacity: approx. 4500 m³/h Unit weight: approx. 280 kg Solid, metal construction Installation with pipes and fittings as shown in the photos Dwjdpfjz D Sm Eox Aared The unit has been inspected and is functioning correctly. The visual condition is as shown in the photos – normal signs of use, dirt, and wear are visible, but they do not affect the operation. We are selling the exact unit shown in the photos. It is possible to inspect the unit on-site before purchase. The stated price is indicative and does not constitute a binding offer. The final selling price will be determined individually after inspection and verification of the unit's technical condition. Due to its size and weight, personal collection is preferred. Transportation is also possible after prior arrangement.

Condition: ready for operation (used), Year of construction: 1960, Available immediately ex works: Table drilling machine, Scharmann Type FB 125 b Year of manufacture 1960 Complete retrofit in 2020 Spindle 125 mm Metric 80 / SK 50 mounting Quill stroke 800 mm Table 1600 x 1200 mm Dodpfxs Aa Im Tj Aarswd Table traverse 2000 mm Installation height, spindle / table 1400 mm Table longitudinal travel 2500 mm Spindle speeds 5 – 740 rpm, 7.5 – 1100 rpm With Wohlhaupter machining: 5 – 74 rpm 3-axis Heidenhain digital display Vertical head Large Wohlhaupter turning head Various other accessories Weight 21 tons Price: Euro 7,500.00 + VAT, ex works

Condition: excellent (used), For sale: a used KSB ETABLOC-GN 32-125/222 industrial centrifugal pump with a 2.2 kW electric motor. The pump has been inspected and is in full working order. It is in used condition, with normal signs of wear and tear, as well as some localized surface corrosion on the flanges and housing. The photos provide a detailed view of its condition. Pump technical data: Manufacturer: KSB Model: ETABLOC-GN 32-125/222 Design: GN11 Identification number: 48861776 Number: 5-925-204037/1 Capacity: 4–30 m³/h Head: 25–18 m Rotational speed: 2900 rpm Approximate weight of the complete unit: 39.5 kg Motor data: Djdpoz Snvmofx Aarowd Manufacturer: KSB Type: OU FA 90L2A-60 Power: 2.2 kW Power supply: three-phase Voltage: 220–240 / 380–420 V Frequency: 50 Hz Rotational speed: 2850 rpm Protection class: IP55 Insulation class: F cos φ: 0.89

Condition: used, Year of construction: 2008, machine/vehicle number: 1001877, functionality: fully functional, power: 22 kW (29.91 HP), volume flow: 14,100 m³/h, intake vacuum (max.): 450 mbar, suction capacity: 14,100 m³/h, intake manifold diameter: 450 mm, filter area: 125 m², actuation type: electric, total height: 5,800 mm, total length: 2,100 mm, total width: 2,100 mm, overall weight: 2,000 kg, Equipment: CE marking, documentation/manual, dust extraction, Schuko Ecovar extraction system, 14,000 m³/h – complete and operational Complete Schuko Ecovar industrial extraction system for sale, including a 22 kW main fan, a 7.5 kW transport fan, and the corresponding control system. The system is currently in operation and can be inspected while it is running. Due to an expansion of our capacity, this system will be replaced by a larger, new Schuko extraction system. An interesting complete system for companies looking for a powerful used extraction/filtration system with a capacity of approximately 14,000 m³/h. Key features * Capacity: approx. 14,000 m³/h * Filter area: 125 m² * Main fan: 22 kW * Transport fan: 7.5 kW * 100 filter hoses * Electric/pneumatic filter cleaning * Antistatic filter material * Includes the corresponding control system * Complete system * Currently in use and can be inspected while running Technical data for the filter system Brand: Schuko Type: Ecovar 04 22020/25/125, through-flow Design: overpressure, static Number of elements: 1 Material extraction: transport fan Filter material: antistatic polyester needle felt, BIA, AWN 05 Diameter of filter hoses: Ø 160 mm Length of filter hoses: 2,500 mm Number of filter hoses: 100 pieces Filter fabric area: 125 m² Filter cleaning: electric/pneumatic Weight: approx. 2,000 kg Dimensions of the filter system (L × W × H): approx. 2,100 × 2,100 × 6,000 mm Main fan Brand: Schuko Type: S 450/O/L2 Connection diameter: Ø 450 mm Dsdsz Egzmepfx Aarowd Capacity: 14,100 m³/h at 3,412 Pa Motor power: 22 kW Drive: direct Transport fan Brand: Schuko Type: TSK 250/O/S4 Connection diameter: Ø 250 mm Capacity: 4,500 m³/h at 3,344 Pa Motor power: 7.5 kW Drive: indirect Design: reinforced Condition and availability The extraction system is currently operational and is being sold only because it is being replaced by a new Schuko system with a larger capacity. This provides the opportunity to inspect the system while it is running before dismantling. Availability upon consultation. Dismantling and transport upon consultation. Serious interest? Please feel free to contact us for additional information, photos, technical data, or to arrange an appointment to inspect the system while it is running.