Used Benfra 135 B for sale (40,304)

Condition: used, fuel type: diesel, Year of construction: 2016, operating hours: 6,288 h, Please contact Kristoff Van Havere for more information - Hydraulic quick hitch CW30 - Bucket 1800mm - Auxiliary piping for hammer and sorting grab - Grease system - New pads 500mm. Redpfx Ajxx Hy Eob Ujr

Condition: used, Coil Width: 12″ – 60″ Material Thickness: .015″-.135″ Coil ID: 20″-24″ Speed: 180 fpm Rsdpfx Asihf Tpsb Uer Direction: Left to Right Entry Floor Standing Coil Car Mandrel Uncoiler with Powered Expansion Motorized Hold-Down Roll Feed-Up Drive Hydraulic Peeler 9-Roll Coil Straightener with 4″ Work Rolls Driven Entry Pinch Rolls 40HP Motor Adjustable Hump Table Mechanical Shear Belt Conveyor with Positive Stop Device Air Gate Sheet Stacker, with Two Section of Gravity Rolls

Condition: used, Year of construction: 2021, operating hours: 161 h, machine/vehicle number: SX135H-557, mast type: telescopic, fuel type: diesel, Empty weight: 21.731 kg Lifting capacity: 454 kg Rjdjyvn Tkjpfx Ab Uer Working height: 4.315 cm Front tyres / undercarriage remaining: 80 Rear tyres remaining : 80 Tyre brand: Outrigger Max. horizontal reach: 2743 m Transport dimensions (LxWxH): 19.76x2.49x3.05 Please contact PFEIFER GROUP for more information

Condition: used, mileage: 30,800 km, power: 309 kW (420.12 HP), first registration: 08/2012, fuel type: diesel, empty load weight: 12,420 kg, maximum load weight: 5,580 kg, overall weight: 18,000 kg, axle configuration: 4x2, wheelbase: 5,300 mm, fuel: diesel, brakes: engine braking, color: red, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro5, suspension: air, loading space length: 6,200 mm, loading space height: 600 mm, Equipment: ABS, air conditioning, crane, cruise control, differential lock, low noise, onboard computer, parking heater, soot filter, trailer coupling, Scania R420 4X2 Flatbed with Crane First registration: 08/2012 Only 30,800 km with documentation!!! Engine operating hours counter: 1,632!!! CR19 long cab with single bunk Euro 5 emission standard Manual transmission Trailer coupling Air conditioning, auxiliary heating Wheelbase: 5300 mm Full air suspension Redpfsyymy Rsx Ab Usr Tyres: 295/60 R22.5, tread approx. 60% Platform length: 6,200 mm Dropside height: 600 mm Loading height from ground to top edge of platform: 1,100 mm Unladen weight: 12,420 kg Crane: Fassi F135A.2.26 E-Dynamic Radio remote control Cable winch Total 7 extensions 6 hydraulic extensions + 1 mechanical 2.50 m / 3,800 kg 4.75 m / 2,435 kg 6.60 m / 1,530 kg 8.55 m / 1,025 kg 10.60 m / 725 kg 12.70 m / 540 kg 14.85 m / 435 kg 16.95 m / 365 kg 19.15 m / 275 kg (mechanical extension) Hook height approx. 23 meters The vehicle is from first owner and is in well-maintained condition. Technical Inspection valid until April 2027. Export / net price: 65,900 Euro All information provided without guarantee. Subject to errors and prior sale.

Condition: used, mileage: 30,800 km, power: 309 kW (420.12 HP), first registration: 08/2012, fuel type: diesel, empty load weight: 12,420 kg, maximum load weight: 5,580 kg, overall weight: 18,000 kg, axle configuration: 4x2, wheelbase: 5,300 mm, fuel: diesel, brakes: engine braking, color: red, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro5, suspension: air, loading space length: 6,200 mm, loading space height: 600 mm, Equipment: ABS, air conditioning, crane, cruise control, differential lock, low noise, onboard computer, parking heater, soot filter, trailer coupling, Scania R420 4x2 Flatbed with Crane First registration: 08/2012 Only 30,800 km, documentation available! Engine operating hours: 1,632! CR19 long cab with one bunk Euro 5 emission standard Manual gearbox Trailer coupling Air conditioning, auxiliary heater Wheelbase: 5,300 mm Full air suspension Tyres: 295/60 R22.5, approx. 60% tread Flatbed: 6,200 mm Sideboards: 600 mm Loading height from ground to top edge of flatbed: 1,100 mm Unladen weight: 12,420 kg Crane: Fassi F135A.2.26 E-Dynamic Radio remote control Winch 7 extensions total 6 hydraulic extensions + 1 mechanical 2.50 m / 3,800 kg 4.75 m / 2,435 kg 6.60 m / 1,530 kg 8.55 m / 1,025 kg 10.60 m / 725 kg 12.70 m / 540 kg 14.85 m / 435 kg Rjdpfx Abjyymy Dj Ujr 16.95 m / 365 kg 19.15 m / 275 kg (mechanical extension) Hook height approx. 23 meters The vehicle is from first owner and in well-maintained condition. TÜV valid until April 2027. Export/net price: €65,900 All information without guarantee, subject to errors and prior sale.

Condition: used, overall weight: 13,500 kg, axle configuration: 2 axles, first registration: 03/2015, Equipment: ABS, * Fliegel 2-axle tandem trailer * TPS 135 Redpeyx R Ehjfx Ab Uor * Curtain-sided body * Air suspension * SAF axles * Downrated to 10 t / Technically possible 13,500 kg * Unladen weight 3,615 kg

Condition: good (used), Year of construction: 1997, functionality: fully functional, Used 3-meter CNC press brake from LVD Rjdpfsytb Saex Ab Usr Type: PPEB 135 30 Capacity: 3100 x 135 tons MNC 95 CNC control CNC controlled axes: Y1, Y2, X, R, Z1, Z2, and XDelta CNC crowning Hydraulic upper tool clamping by WILA 1 set of tools

Condition: new, MVD SERIES B - 3,100x135Tn SERIES B - 4 Axes Large press brake for achieving outstanding bends and flawless workpieces The body and upper beam are of steel construction, designed according to minimum and optimum strength criteria. Model: B135/3100 Bending force: 135 tons Bending length: 3100 mm Distance between uprights: 2600 mm Ram stroke: 260 mm Daylight: 465 mm Throat depth: 410 mm Table height: 940 mm Length x Width x Height: 4690 x 2340 x 2980 mm Approach speed: 210 mm/s Return speed: 130 mm/s Bending speed: 10 mm/s Oil tank capacity: 180L Main motor: 11 kW Weight: 7,750 kg Rsdpfx Abjxfzpze Usr Standard features: CNC 3 axes Y1, Y2, X 260 mm stroke, 410 mm throat depth ESA S630 CNC control unit ± 0.03 mm precision SERVO-driven, motorized rear gauge X = 750 mm Promecam quick-release punch holder Sliding front sheet support arms Special narrow bottom table by MVD (European type) GIVI optical linear scales Standard punch tooling (H: 67, 850 R:08) Standard die tooling (60x60 mm, 4 Vee V=16-22-35-50 mm, 85°, H:60) LED lighting in RAM Optional features: Choice of X-axis backgauge options with 2-4-6-8 stops Wide bottom table for Multi Vee forming dies Anti-deflection crowning with original Wila wedges AKAS or DSP front laser safety systems Additional backgauge fingers Front laser safety

Condition: like new (used), Year of construction: 2019, functionality: fully functional, Technical Specifications Protection Laser CNC Bending Table CNC Axes: Y1/Y2/X/R Manual Axis: Z1/Z2 Split Toolless CYBELEC CYBTOUCH 12 Graphic CN ALMOST NEW CONDITION Features Motorized Backgauge Stroke: Redpfx Asv Tz Ukob Uor 800 mm Working Height: 900 mm Main Motor Power: 11 kW Weight: 7900 kg Oil Capacity: 200 liters Folding Length: 3100 mm Power: 135 T Gooseneck: 400 mm Distance Between Columns: 2600 mm Sliding Stroke: 275 mm Approach/Working/Return Speeds: 200/10/120 mm/s Backstop Speed: 230 mm/sec Table slider clearance: 550 mm Table width: 90 mm Machine dimensions L x W x H: 4250 x 2050 x 2700 mm

Condition: used, mileage: 135,531 km, power: 309 kW (420.12 HP), first registration: 07/2018, fuel type: diesel, tire size: 315/80r22,5, axle configuration: 4x2, wheelbase: 3,600 mm, fuel: diesel, color: green, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2018, Equipment: electric window regulation, Technical information Number of cylinders: 6 Engine capacity: 12.419 cc Drivetrain Rsdpfx Absyh Nlzj Uor Drive: Wheel Engine type: MAN D2676 LF Axle configuration Tyre size: 315/80r22,5 Front axle: Suspension: leaf suspension Rear axle: Double wheels; Suspension: air suspension Weights Empty weight: 7.000 kg Carrying capacity: 12.000 kg GVW: 19.000 kg = Additional options and accessories = - PTO

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, Equipped with 2 large-width upper sanding belts, with a calibration roller and sanding rollers, for sanding wooden panels and veneered surfaces. Redpfx Abeyyb Nao Ujr Maximum working width: 1350 mm Maximum sanding height: 160 mm Machine weight: 2800 kg

Condition: ready for operation (used), Year of construction: 2007, machine/vehicle number: 31662, functionality: fully functional, operating hours: 15,513 h, controller manufacturer: Cadman, bending force (max.): 137 t, working length: 3,100 mm, TECHNICAL DETAILS Pressing force: 1,350 kN Working length: 3,100 mm Redpfxsylwg Ds Ab Usr MACHINE DETAILS CNC control: Cadman Axes: Y1, Y2, X, X1, R, Z1, Z2 Operating hours Total on-load hours: 15,513 h Motor running hours: 28,347 h EQUIPMENT CNC crowning Angle measuring system (not connected) Wila hydraulic upper and lower clamping

Condition: new, neu ca. 12 Wochen ab Auftrags Italien 153200 € 2895.48 € 1350 mm 0,4 - 120 mm 1370 x 2200 mm 6000 m³/h 150 mm 6 bar 4200 mm 2300 mm 2350 mm 4200 kg WITH 2 WORKING STATIONS: 1 X GRINDING BELT UND 1 X BRUSH UNIT ON TOP * Machine made of stress-free welded steel construction for stable and rigid structure * Work table with motorised height adjustment via 4 synchronised spindles. * Independent drive motors for each work group. * Hoods for extraction inside the machine, one per station. Touch screen for: * Automatic star-delta connection of the main motors * Digital display for sheet thickness with decimal point tolerance * Material thickness adjustment (+/- 0.1 mm) * Machine condition monitoring with alarm messages FEEDING SYSTEM * Robust steel structure, wear-resistant surface. * Vacuum conveyor belt on request Rsdpfeynmw Rsx Ab Uor * The table raises and lowers from 780 mm to a maximum height of 950 mm above the floor. The power of the motor for height adjustment of the table is 0.25 kW. * Maximum permissible weight on the table: 140 kg. * Variable feed speed via frequency converter 0,4 to 4,5 m/min, Option 0,2 to 2,0 m/min or 0,6 bis 6,0 m/min. * Rubber conveyor belt, oil and temperature resistant. * Lateral guides to prevent the belt from lifting off. * Rubber pressure rollers in front and behind each station, oil and temperature resistant. * Automatic centring device for the conveyor belt * Automatic servo cooled motor * Speed motor on the main touch screen 1 TH R GROUP DEBURRING WITH ABRASIVE BELT * Rectified and balanced contact roller with 180 mm diameter. Coating of oil and heat resistant nitrile rubber. Standard roller hardness 55° shores. Mounted on an eccentric shaft that allows to control the working position and compensate the abrasive belt wear, with a range of 8 mm. This system is controlled by a pneumatic cylinder that allows the automatic insertion of the group into the work and, in case of emergency and/or machine stop, the immediate removal of the sanding belt from the working point. It is possible to insert sanding belts and/or Scotch Brite. * Pneumatic on-off switch. * Roller adjustment up-down "grain" stroke 10 mm * Variable speed motor 11 kW with automatic braking in case of emergency. * Rotation speed in feed direction 4 - 18 m/s. * Width and duration of the oscillation setting. * Pneumatic tensioning system for the abrasive belt. * Sanding belt centring system, with electronic photocell, Oscillation adjustment in width and time. 2ND GROUP ROTATING BRUSH UNIT * 2 rows of vertical brushes, 4 rotating clockwise and 4 counterclockwise. * Each brush has a diameter of 350 mm and a length of 530 mm. * Motorised raising and lowering of the group to regulate the pressure of the deburring. * Variable speed motor 1,5 kW. * Variable speed group electronic inverter 6 - 12 U/min. * Brush motor with variable speed, power 6 kW (4 x 1,5 kW). From 300 to 900 U/min. * Speed programmable control and display on the electronic touch screen. CONTROL OF THE THICKNESS AND THE BRUSHES * Motorised table lifting with fine adjustment via 4 precision screws with ball bearings * Maximum operating pressure 120 mm * Pressure motor power kW 0,75 * Pressure adjustment via touchscreen CONVEYOR BELT CLEANING Brush system in nylon canvas for cleaning the conveyor belt (length 1350, Ø =150 mm), located at the back of the machine under th...

Condition: used, Press Brake Brand: LVD Capacity: 3000 x 135T Model: PPBL 135/30 Rodpfx Aox Tqt Uob Uer Distance between uprights: 2550 mm Throat depth: 200 mm Stroke: 130 mm Working speed: 8 mm/s Number of backgauge axes: 2 Motor power: 8.5 kW

Condition: new, pressure: 135bending length: 3020column width: 2555daylight: 550stroke lenght (max.): 320column throat depth: 450messurements (LxWxH): 3745x2250x2835weight approx.: 93004 axes (Y1, Y2, X, R): Ja alle Achsen über die Esa S630 (2D Grafik Steuerung)CNC crowning system by control: ja über die Esa S630 (2D Grafik Steuerung)motor power: 15 Standard equipment: KK Kletzer Europe We have put together a high-quality model for Europe. The CNC press brake KK kletzer Made in Turkey. Model KKI EUROPE XL The powerful EUROPA XL press brake is characterized by its high precision, accuracy and versatility. Europa XL has a very large installation height and, as a result, a large stroke (cylinder travel). The projection is also above average in order to restrict yourself as little as possible. We rely on quality, which is also reflected in the management. As a standard control we have the high-quality Esa S640 (2D graphic control) Furthermore, the press brake KKI Europa XL is equipped with Y1, Y2, X and R CNC axes via the control. Of course, the CNC crowning control Esa S640 (2D graphic control) is also included. We don't make any compromises when it comes to the upper tool and the die either the CNC press brake KKI EUROPA XL with quality tools from EUROSTAMP Italy. Of course, every machine is only as good as the service. For this reason we set our focus on highly qualified employees with many years of experience in the CNC sheet metal processing sector. CNC axes Y1, Y2 , X and R axis Esa S640 (2D graphic control) Back gauge with double linear guide and ball screw Motorized crowning device with CNC control 2 pieces of support arms in front, heavy version, height adjustment with hand wheel, from 175 tons heavy version on linear guide Laser safety device on the upper beam CE protective equipment various options available Other controls: ESA 640 2D 15'' touch screen control                                                  ¤ 4,520.00 inkl. ESA 675 W 3D 21'' touch screen control (Windows Base)                  ¤ 6,485.00 DELEM 66 T 2D 17'' touch screen control (Windows Base)                ¤ 10,165.00 DELEM 69 T 3D 17'' touch screen control (Windows Base)                ¤ 16.350,00 Redpfed Ehinjx Ab Usr KK Industries GmbH There's something for everyone!

Condition: good (used), Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, tilting cylinders -Hydraulic cylinder: tilt cylinder -Stroke: 135 mm Rjdpfx Abog Akafo Usr -Piston rod: Ø 126 mm / mount Ø70 mm -Cylinder: outer Ø 155 mm -Hole: Ø 50 mm / Dimensions see photo technical drawing -Dimensions: 365/260/H175 mm -Weight: 39 kg

Condition: used, Control card, output card, controller, memory module, PLC controller, expansion module, interface module, analog assembly, analog module, analog output, interface module, AS-Interface actuator module, AS-Interface sensor module, AS-Interface sensor/actuator module, sensor/actuator module, connection , electronic modules, PLC control, digital input, digital input, reserve module -Manufacturer: Siemens, Simatic S7 electronic module ET 200S -Type: 6ES7 135-4GBO1-OABO -Number: 1x module available -Price per piece -Dimensions: 55/15/H80 mm -Weight: 0.1 kg/pc Rodeh D Almepfx Ab Uer

Condition: reconditioned (used), functionality: fully functional, turning diameter over cross slide: 1,000 mm, turning diameter: 1,350 mm, turning length: 3,000 mm, Status: during general overhaul. The PORĘBA TR series lathe is a universal machine tool intended for both roughing and finishing operations. It is particularly suitable for machining shafts as well as heavy, large-size workpieces. The offered machine is currently undergoing a general overhaul – the last photo presents its current stage of refurbishment. The remaining photographs show TR series lathes after general overhauls performed by our company and delivered to end users. They serve as a reference for the final quality standard and workmanship. Scope of the general overhaul: - Complete dismantling of the lathe - Regeneration and replacement of worn components Rsdpfx Ajyh H Iyob Ujr - Calibration of trapezoidal lead screws and manufacturing of new bronze nuts - Replacement of bearings and sliding bushings, including new spindle bearings - Grinding of bed, carriage and top slide guideways, followed by scraping of mating surfaces (with application of anti-friction materials) - Regeneration of the tailstock quill - Regeneration of the tool post - Overhaul and modernization of lubrication and coolant systems - Electrical scope: manufacturing of a new electrical cabinet, complete new machine wiring, and replacement of all electrical components with new ones - Inspection of electric motors together with replacement of bearings - New painting - After completion of the overhaul: trial assembly, preliminary acceptance at our workshop, positioning on the foundation, levelling and final acceptance - Adaptation of the lathe to minimum safety requirements in accordance with applicable EU Directives

Condition: new, * IMMEDIATE AVAILABILITY * Latest BJT model with numerous retrofitting options available: including hydraulic tipping function, auxiliary ramps, etc. Technical Specifications: • Brand: Brian James • Model: Race Sport MY2025 • Vehicle type: Car transporter • Vehicle condition: New vehicle • First registration: Without initial registration • TÜV/HU: 2 years from first registration • Internal dimensions (LxWxH): 550 x 210 x 199 cm • External dimensions (LxWxH): 715 x 250 x 253 cm • Loading platform height: 48 cm • Permissible total weight: 3,500 kg • Unladen weight: 1,445 kg • Payload: 2,055 kg • Chassis: Lowloader (wheels beside the superstructure) • Tyres: 155/70R12 • Suspension: ALKO rubber spring axle • Jockey wheel: Yes • 100km/h approval: Optional, retrofittable DESCRIPTION • Black body made from high-quality, glass-fibre reinforced plastic. Lightweight yet extremely robust • Full-length daylight roof • Manoeuvring handles front and rear • Front access doors on both sides for easy lashing of the front wheels • Large, lockable side flaps on both left and right in the direction of travel • Full-height and -width rear tailgate with lockable internal rotary bar lock Rsdpfx Ajydiihsb Uor • Rollers integrated at the rear of the vehicle • Internal height 1,990 mm – entry height at rear 1,880 mm • Perforated steel lashing floor provides high slip resistance and is extremely wear-resistant, even under the toughest operating conditions • Numerous lashing points and a highly load-resistant floor offer flexible securing options and optimal grip • Closed multiplex floor panel • Electric 12V winch with cable remote control. 2,250 kg pulling force, with roller fairlead, winch cable and carabiner hook. Powered by an onboard battery • Highly rigid welded steel frame • Frame fully hot-dip galvanized • Spare wheel with bracket installed • Reinforced, highly stable V-drawbar • ALKO overrun hitch and parking brake • Reverse automatic system • Steel cast coupling head with integrated ALKO high-security lock • Plastic mudguards • 13-pin connector • Reversing light • High-capacity safety lighting • Integrated rear fog light • Various marker lights front, side, and rear • Heavy-duty jockey wheel • 5-year chassis warranty Optional accessories available – please enquire! New vehicle with warranty and TÜV certificate. - Financing or leasing possible - Nationwide delivery available - All prices include VAT - Vehicle registration documents can be shipped in advance or short-term licence plates (Germany) can be provided - Export plates including customs declaration available - Subject to errors, omissions, and prior sale -

Condition: ready for operation (used), Heidenhain 324 955-17 interface board SN: 71 401 350 B, the item has been completely overhauled and comes with a 3-month warranty, used, in good condition, 100% functional, delivery as per photos. Rodpsx Ervusfx Ab Uor

Condition: ready for operation (used), Siemens 6SL3120-1TE15-0AA4 Single Motor Module Version: B SN:T-FO6013590, used, in good condition, 100% functional, delivery scope as shown in the photos. Rsdpfxjx Euz Ho Ab Ujr

Condition: ready for operation (used), Baumüller BUS20-60/135-30-001 built-in power converter SN:91314741, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos Rjdpji D T Hujfx Ab Usr

Condition: used, color: other, first registration: 03/2010, Year of construction: 2010, Serial number: 11.15.349.0057 Rsdpfxswxv Nfe Ab Ujr We have a stock of >100 axles. Please contact us if you can't find what you are looking for.

Condition: used, color: other, Year of construction: 2010, Serial number: SBK2243K01 We have a stock of >100 axles. Rodpjrq D Rvofx Ab Uer Please contact us if you can't find what you are looking for.

Condition: used, Year of construction: 2019, operating hours: 1,617 h, machine/vehicle number: SX135H-434, mast type: telescopic, fuel type: diesel, Empty weight: 21.712 kg Lifting capacity: 454 kg Working height: 4.315 cm Front tyres / undercarriage remaining: 60 Rear tyres remaining : 60 Tyre brand: Outrigger Max. horizontal reach: 2743 m Transport dimensions (LxWxH): 19.76x2.49x3.05 Please contact PFEIFER GROUP for more information Rsdpfx Ajw Dmwdeb Ujr