Used Cross Conveyors Feeders for sale (17,547)

Condition: excellent (used), Vibratory feeder with linear feeder and sound insulation by California Vibratory Feeders. 110 Volt, 50 / 60 Hz, 2.5 Amp. Was only used for a trial. Equipped with an integrated light barrier on the linear guide rail for switching off the vibratory bowl and an air nozzle for part separation. Cedpsxrb S Nefx Aaqehd

Condition: used, functionality: fully functional, roll diameter: 50 mm, roll width: 580 mm, total width: 665 mm, total height: 220 mm, total length: 2,990 mm, conveying length: 2,800 mm, TAF article number: 1000003717 Manufacturer: Best Conveyors Year of construction: unknown Overall dimensions: approx. 2,990 x 665 x 220 mm (LxWxH) Cheek width: 2 mm Cedpfx Aeuq Hrljaqehd Cheek height: 220 mm Conveyor length: 2,800 mm Conveyor width: 580 mm Roller type: Steel Rollers per axle: 1 piece Roller pitch: 100 mm Roller diameter: 50 mm Drive: Gravity Condition: Used / fully functional Function test: OK

Year of construction: 2013, condition: used, Technical data of the bale opener line for RDF. MSW, paper, cardboard: Manufacturer Cross Wrap Oy Ltd, Siilinjärvi, Finland Type BO 4000 Year of manufacture 2015 Quantity of opened bales 674 pieces Operating time only 3 days, exclusively by running in the entire line during new installation Opening time approx. 45 seconds per bale Bale dimensions (W x H x L) 1100 x 1100 x 1400 - 1900 mm Max. Bale weight 2,000 kg Conveying height of the system 1,400 mm Max. Conveying width of the system 1,200 mm Material to be opened RDF/MSW Availability of the line 98% Noise level of the bale opener line 85 dB(A) Total connected load 37 kW Rated current 125 A Operating display SIEMENS SIMATIC HMI Touch Control SIEMENS S7 ET200S Chjdpfx Aeu Tg I Djaqod Installation dimensions 8,463 x 2,890 x 3,960 mm (l x w x h) Scope of delivery: Feed conveyor 3,500 x 1,200 x 1,400 mm Feed conveyor to opener 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Special equipment: Oil heating in hydraulic oil tank Heating in control cabinet Oil cooler in Hydraulic unit Explanation of the short period of use: The entire line of Cross Wrap bale openers type BO 4000 was installed at a municipal waste incineration plant in 2015. The background to the installation was that in the case of a malfunction or maintenance of the incinerator, the municipal waste could continue to be received, baled, wrapped and stored until the malfunction was cleared. Then the bales should all be opened again and the waste fed into the normal incineration process. This worst-case scenario never came to pass. The plant was set up, run in and then never used in regular operation. Only during the commissioning and running-in of the entire plant in 2015 were 674 bales opened on three days. The plant is in very good condition and ready for operation immediately. Due to reconstruction measures in the incineration plant, the installation area of the bale opener was needed. As a result, the entire line is for sale. Short description of the wrapping process: The pressed bales are placed on the infeed conveyor belt from the side or from behind by means of a forklift truck. For opening, the bales must run horizontally to the conveyor belt with the wire or twine binding, otherwise the bales must be turned 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or twine strapping. The front and rear rotating knives slit the bale lengthwise. Afterwards, the gripper returns to the starting position. The opened bale is now conveyed via the conveyor belt to the discharge chute and then falls onto the following conveyor system. Comments: New price of the completely plant 296.000,- €. The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagram) is complete. The unit has been dismantled into freight-manageable units, stored and is available for inspection and loading at short notice. We do not accept any liability for the technical details or any errors.

Condition: used, Year of construction: 2018, overall weight: 70 kg, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: 100% prior to delivery Manufacturer: MB Conveyors Type: PA_ALL 2470 x 500 Condition: gebraucht CONVEYOR: - Effective length: 2470 mm Effective width: 500 mm Height min. / max.: 800 / mm Csdpfx Aajthwrtjqshd Total installed power: - Other equipment: PU Gurt, Lichtschranke, Abräumtaste CONTROL: - Bildschirmsprachen: - Operating manuel: - GENERAL DATA: - Total weight: 70 kg Total size L x B x H: 2,5 x 0,6 x m

Condition: excellent (used), Year of construction: 1997, Rip and cross saw REMA DMLK 30 Producer of REMA Machine model / type DMLK 30 Year of production 1997 Machine category Longitudinal and transverse saw Location Gorzów Wlkp. Conditions of delivery PERSONAL COLLECTION Cost of delivery Customer cover Startup type to be agreed Description Comments - after the technical review - very good condition - year of production 1997 TECHNICAL PARAMETERS: Cedpfx Aefv Hpheaqshd main engine 3.9 kW trolley length 1370 mm blade diameter 300 mm angle adjustment 0 - 45 " height adjustment cutting height max. 90 mm cutting width on the right side 885 mm ruler length 1350 mm ratchet extended receiving table two kinds of blade rotation speed 3700 and 5000 RPM The protractor visible in the photos is an additional option for PLN 400 net dimensions: length / width / height 135 x 85 x 135 cm weight ~ 320 kg

Condition: good (used), Year of construction: 2007, Turntable, round table, rotary table, with container attachment, for packaging, storage holder, packaging machine, -Manufacturer: MB Conveyors, Turntable with 2 levels Doubling the storage capacity -Table top: stainless steel -Base frame: max. load 80 kg Codpfowlr A Isx Aaqehd -Number: 2x turntable available -Price: per piece -Transport dimensions: 1850/1450/H1170 mm -Weight: 195 kg/piece

Condition: like new (used), Range (in depending on the lighting conditions) until: 15 m Range with laser receiver: 30 m, & more 5 m: leveling accuracy +/-1 mm Self leveling range: 4° +-0,5 ° Accuracy of the horizontal line at 5 m: +-1.5 mm Accuracy of vertical line at 3 m +-0.75 mm Number of laser lines: 2 Weight: 485 g Chedpod Ecncefx Aaqod

Condition: used, functionality: fully functional, Item no.: 1000003766 Used conveyor belt driven - 1.520 mm Technical data: Manufacturer: MB Conveyors Year of construction: 2022 Overall dimensions: 1.520 x 540 x 320 mm (LxWxH) Conveyor length: 1.400 mm Conveyor width: 400 mm Cheek height: 110 mm belt type: PVC, smooth Gear motor: included - gear construction NORD 50 Hz - 230/400V - 0,18 kW Conveying speed: constant 0,1 m/s Condition: used / fully functional Chodpfx Asm Twvdjaqsd Function test: Ok OPTIONAL: Supports (height freely selectable), Electrical connection (ON/OFF) EMERGENCY STOP button Frequency converter

Condition: like new (used), Year of construction: 2018, functionality: fully functional, conveyor belt length: 6,000 mm, conveyor belt width: 2,000 mm, Manufacturer: MB Conveyors Type: PA ALL Cjdpfxjwfym Ij Aaqjhd Year of manufacture: 2018 Length: 600 cm Width: 200 cm Conveyor belt in mint condition!

Condition: used, Year of construction: 2018, overall weight: 70 kg, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: 100% prior to delivery Manufacturer: MB Conveyors Type: PA_ALL 2470 x 500 Condition: gebraucht CONVEYOR: - Effective length: 2470 mm Effective width: 500 mm Height min. / max.: 800 / mm Total installed power: 0,18 kW Other equipment: PU Gurt, Lichtschranke, Abräumtast CONTROL: - Bildschirmsprachen: - Operating manuel: - GENERAL DATA: - Chodpfx Aastqgp Noqjd Total weight: 70 kg Total size L x B x H: 2,5 x 0,6 x m

Year of construction: 2007, condition: good (used), MB Conveyors Italy PA ALL (2007) • Length: 357 cm • Width: 60 cm • Height: 215 cm Chjdpfeu Acqpex Aaqsd

Condition: ready for operation (used), Year of construction: 2021, Turns: 3.25, infeed: south, outfeed: West, infeed height: 3700mm, outfeed height: 1000mm, transport direction: downwards, max. belt speed: 40m/min, max. belt load: 45kg/m. Including an external control cabinet. Documentation available. On-site inspection is possible. Codpowz N T Aefx Aaqohd

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: VO 113812, conveyor belt width: 600 mm, conveyor belt speed: 816 mm/s, total length: 2,400 mm, total width: 2,500 mm, total height: 3,950 mm, inner radius: 500 mm, outer radius: 1,100 mm, power: 1.1 kW (1.50 HP), input voltage: 500 V, input frequency: 50 Hz, motor manufacturer: Movimot, Equipment: safety light barrier, type plate available, Vertical transport direction: Downwards Belt speed: 40 m/min Number of spirals: 3.25 (Entry South - Exit West) Running direction: Counterclockwise Entry height: 3,700 mm Exit height: 1,000 mm Inner radius: 500 mm Outer radius: 1,100 mm Angle at inner radius: 12.7 degrees Angle at outer radius: 6 degrees Lower section covers: Yes, plastic on lower run Frame material: Bare steel, coated RAL 5010 Side guide: 150 mm 26.00 meters (belt length) JP-HDXL belt Belt width: 607 mm Color: Black Panel material: Nylon (PA6) Cross rods: Stainless steel, 6 mm in diameter Every 5th panel with TPU inserts Drive: Yes, SEW Movimot (see attachment) Gear motor Movimot (1 pc.) Speed control: None – single speed with potentiometer Motor protection: IP55 Motor frequency: 50-60Hz Motor voltage: 3x400-500V Photoelectric sensor & control cabinet were retrofitted (details on request) Collection in the Frankfurt am Main area must be organized by the buyer. (All information without guarantee) Chodpfx Aow Niftjaqsd

Condition: good (used), Year of construction: 2018, functionality: fully functional, conveyor belt length: 8,000 mm, conveyor belt width: 800 mm, total length: 23,000 mm, power: 4.5 kW (6.12 HP), input frequency: 50 Hz, ID43709 MACHINE: Telescopic Boom Conveyor Chedpewhdd Nofx Aaqsd BRAND: FMH Conveyors Best Reach TYPE: BR3150-800 YEAR: 2018 LENGTH RETRACTED: 8m LENGTH EXTENDED: 23m

Condition: used, ROLLER ELECTRIC CONVEYORS SYSTEM 120M Stainless still Consists: 4 conveyors x 15m length 2 conveyors x 17m length 2 conveyors x 10m length 5 conveyors kurve 90 Roller width: 50 cm Roller diameter: 50 mm Drive motor system Height frame: 20cm Conveyor speed: please contact us Csdpfx Aow D Raisaqjhd Excellent condition

Condition: used, Roller conveyor with chain cross conveyor Chedpfx Aaei Sdk Seqjd Can be used after resaw. - Electric motor: 1,1 kW - Electric motor: 0,75 kW - Electric motor: 1,1 kW

Condition: like new (used), functionality: fully functional, Year of construction: 2016, Manufacturer: MB Conveyors Model: SM Cjdowb Epgopfx Aaqjhd Year of manufacture: 2016 Drum hole diameter: 35 mm Technical condition: very good – as new!

Condition: new, Year of construction: 2025, Equipment: documentation/manual, type plate available, Rummel conveyors 800/2000 x 440 mm Csdpfjtmtzyex Aaqjhd - Parts pick-up 720 mm, ascending conveyor 2000 mm, conveyor width 340 mm - Quality anodized aluminium profile, with grooves - Useful width = 440 mm Belt width = 510 mm - Aluminum side guide 50 mm high - PU conveyor belt with cleats 30 mm high, approx. every 400 mm - Worm gear motor 0.12 kW - 3 x 400 V, 50 Hz - Constant belt speed approx. 4.5 m/min. - Mobile base frame, discharge height at 25° = 750 mm, at 50° = 1,400 mm - Feed hopper made of V2A - Motor protection switch with 5 m cable & 16 A CEE plug Optional: Dimensions on customer request FDA compliant belt Various belt speeds Main features: Anodized ALU profile structure (thickness 15 µm) alloy 6060 with integrated and and non-removable side guides h 50 mm. Standard configuration with central base, switch/motor protection + cable and plug. Cut and oil resistant standard conveyor belt with smooth surface in green polyurethane (Pantone 320), with thermo-sealed cleats h=30 mm, cleat spacing 400 mm, vulcanized conveyor belt splice.

Condition: excellent (used), Year of construction: 2021, Conveyor belts Chodsvy Amhjpfx Aaqed MB Conveyors Type: N-TR BJ 2021 L. 2.0 meters B. 0.50 meters H. Up to 0.95 meters

Condition: good (used), Year of construction: 2009, functionality: fully functional, conveyor belt length: 6,500 mm, conveyor belt width: 800 mm, total length: 21,500 mm, input voltage: 380 V, MACHINE: Telescopic Boom Conveyor FIRE: FMH Conveyors. Best Reach Codpewhc Ugsfx Aaqshd TYPE: BR4140 YEAR: 2009 LENGTH RETRACTED: 6.5m LENGTH EXTENDED: 21.5m

Condition: new, Year of construction: 2025, Equipment: documentation/manual, type plate available, Rummel conveyors 800/1800 x 340 mm - Parts pick-up 720 mm, ascending conveyor 1800 mm, conveyor width 340 mm - Quality anodized aluminium profile, with grooves - Effective width = 340 mm Belt width = 410 mm - Aluminum side guide 50 mm high - PU conveyor belt with cleats 30 mm high, approx. every 400 mm - Worm gear motor 0.12 kW - 3 x 400 V, 50 Hz - Constant belt speed approx. 4.5 m/min. - Mobile base frame, discharge height at 25° = 650 mm, at 50° = 1,250 mm - Feed hopper made of V2A - Motor protection switch with 5 m cable & 16 A CEE plug Optional: Dimensions on customer request FDA compliant belt Various belt speeds Main features: Anodized ALU profile structure (thickness 15 µm) alloy 6060 with integrated and and non-removable side guides h 50 mm. Standard configuration with central base, switch/motor protection + cable and plug. Cut and oil resistant standard conveyor belt with smooth surface in green polyurethane (Pantone 320), with thermo-sealed cleats Codpfjtmty Ejx Aaqehd h=30 mm, cleat spacing 400 mm, vulcanized conveyor belt splice.

Condition: excellent (used), Year of construction: 2020, STROAGE system MB Conveyors Year of manufacture 2020 Chsdpsv Uaciefx Aaqod

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 260105, saw blade diameter: 800 mm, overall weight: 2,960 kg, table length: 700 mm, Equipment: CE marking, TECHNICAL DETAILS Min. saw blade diameter: 790 mm Csdpfx Aaoxq Au Ajqshd Max. saw blade diameter: 800 mm Spindle saw blade diameter: 40 mm Infeed table length: 700 mm Outfeed table length: 700 mm MACHINE DETAILS Main motor power: 15.0 kW Dimensions & Weight Dimensions (L x W x H): 3,600 x 2,550 x 2,100 mm Weight: 2,960 kg EQUIPMENT CE marking

Condition: used, Year of construction: 2003, The Mueller Martini CB 16 stacker, manufactured in 2003, is a robust and efficient solution for stacking and organizing printed materials. With a format of 500 x 340 mm, this stacker is currently in production and located in the United States. The delivery terms are FCA (Free Carrier), meaning the seller delivers the goods, cleared for export, to the carrier appointed by the buyer. The machine is in good condition, ensuring reliable performance for various stacking tasks in printing and finishing applications. Format: 500 x 340 mm Equipment: Good condition without any damage Cedpevmnfpefx Aaqohd

Condition: refurbished (used), Year of construction: 2007, Looking to expand your existing Buhrs ITM (Winkler+Dunnebier) W+D envelope inserter with more feeders? We have all Buhrs ITM feeders available! The Buhrs / Winkler and Dunnebier AT25rotary and HF3 friction feeder are developed to be installed on the Buhrs-ITM BB300 envelope inserting systems The Buhrs / Winkler and Dunnebier HF2 friction and the RF2 vacuum rotary feeder are developed for the Buhrs-ITM BB600 and the Buhrs BB700 envelope inserting systems. The Buhrs RF2 vacuum rotary feeder can be retrofitted on most BB600 and all BB700 LL envelope inserting systems in the market The RF2 vacuum rotary will seperate the material with three suction cups and has bottom fed. This feeder is capable to feed material with high speeds. Chedsq Ec Rgopfx Aaqed We have the following feeders available! AT25 Vakuum rotary feeder (BB300) AS25 Shuttle feeder (BB300) HF3 vakuum friction feeder (BB300) RF2 Servo vacuum rotary feeder (BB600 and BB700) AS2 Shuttle feeder (BB600 and BB700) HF2 Vacuum friction feeder (BB600 and BB700) All feeders we offer for sale are completely checked and tested. All parts which need to be replaced are new. We have multiple of the Buhrs ITM / Winkler & Dunnebier feeders available. Contact us for a quote.