Cross conveyor buy used

Identified location: Ashburn (US) (Edit)
Enter your address
or
Move
5

Roof cross conveyor HIT DKQ

Geiselwind, GermanyGermany
6695 km
1994
excellent (used)
Stable roof cross conveyors with 5 strands of chains. Length: 5,350 mm. width up shot: 2.117 mm. Total width: 2,500 mm. Height 550 mm. Distance: 700-800-1,400-1,700 mm. Bfdxrsor Full Verblecht. Complete with Antreieb geared motor more
4

Cross conveyor

Schwäbisch Gmünd , GermanyGermany
6698 km
ready for operation (used)
In the pictures, the lifting beams are not cleaned, but very clearly and it reflects also the statement that the walking beam in very good condition and are only 5 years old. Ft0iysd more
3
1 gebr. Cross conveyor with 5 chain strands, very stable Nbvsp Length of the chain lengths: 5,00 m Distance the chain lengths: 2.00 / 0.90 / 0.90 / 0.90 m more
5
Length of roller conveyors - infeed: mm F8klgq8r0 Length of roller conveyors - outfeed: mm Numbers of cross transfers:23 Stck. 23 pieces Kaltenbach cross transfers available as chain type system with dimensions L 8320 mm x W 240 mm x H 600 mm (motors and drive shafts available as an option) more
1
Conveyor belt Beschikund Weinig - cross conveyor belt Length: 1,200 mm Width: 1500 mm Motor 0.75 kW / 380 V Adjustable ejector Head 800-1.200 mm Approximate weight: 120 kg Fl9qyjbyy Year of construction: 1982 Condition: very good more
6
Manufacturer Paal Typ Konti 700 GSK Year of construction 2011 Cirabkd Hours of operation 3,988 h, stand January 2018 Piece of pressed bales 31,423 bales Press power main press 1,940 kN / 194 tons Specific press capacity 160 N/cm² Feed channel 2,000 x 1,020 mm (l x w) Capacity per cycle time 3,45 cbm Volume output at idling speed 890 m³/h Throughput rate under operating conditions at a bulk weight of 35 kg/m³ 470 m³/h Bale size 1,100 x 1,100 mm (w x h) length adjustable Driving motor 2 x 75 kW C... more
7
Very well maintained on shot table with honing cross conveyor. Length: 4,850 mm. width: 900 mm. With 6 piece chain strands, each 2 drive. Distances 600-500 - 700 - 1000 - 1000 mm. driven by gear brake motor. Hjpbe2bsu more
2

Cross bar conveyor Cefla 13.000 mm

Blomberg, GermanyGermany dealership location
6504 km
used
Bcrwkok7tm - Producer Cefla - Year of construction ~ 2006 - Working width 1300 mm - Colour 7035 - Length 13.000 mm - Location, in stock more
6
Technical data see figure. 8z2a9p more
5
8-strand cross conveyor with lining between all 8 strands of chains, Cleated chains and gear motor drive, length approx. 2.0 m, conveyor width approx. 4.5 m, followed by angular contact roller with 10 driven rollers to 6 m length and Gear motor drive, can also be separated Xp2a0xwqw more


cross conv...
daily

New machines via email!

Stay updated!
1

6-strands-cross conveyor (6,5 x 2,6 m) 6 x 65/26

Bielefeld, GermanyGermany dealership location
6462 km
1980
used
6-strands-cross conveyor (6,5 x 2,6 m) SMA-REF-6068 Type: sawmill conveying, pushing, dumping Manufacturer: Esterer Bamyj9jsfh Model: 6 x 65/26 Year: 1980 Working range: Length: 6,5 m Width: 2,6 m Features: 6-strands-cross conveyor Condition: ready for action Location: Western Germany Availability: on demand Terms of delivery: ex works Terms of payment: 100% before dismantling/loading more
4
QUERFOeRDERER Jumper 1 X 7m, with gear MOTOR a 4 kw. 2 chain store, EURO 1 200.--+ VAT Cross conveyor Jumper 1 x 11 m, with Getreibemotor 4 KW, 2 chain conveyors, 1200,--euro + VAT Itpmka3 more
9
Well-kept roller with detachable cross conveyor. Trigger to the left and right. Overall length: 14,300 mm. roll length: 1,000 mm. overall width chains 1,750 mm. honing cross conveyor with 4 strands of chains with each 1,600 mm distance. Shared drive with 2 x 4,0 KW geared motors. Baffle wall with damping cylinders. Bcrjyniyfh more
5

Cross conveyor Moehringer / Braun Canali QF

Grevesmühlen, GermanyGermany dealership location
6540 km
used
Cross conveyor Moehringer / Braun Canali 4 line Length 3700mm Ptbi2e Strand spacing 1300 mm 1000 mm 1000 mm Pumping height 950 mm more
2
 Start Chat

Cross conveyor unb. unb.

Eriswil, SwitzerlandSwitzerland dealership location
6655 km
1995
used
Cross conveyor Built in 1995 L x W x H: 4000 x 3800 x 1500 mm Weight 4000 kg 8gqxnyr9t The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4952 Eriswil/DE-79618 Rheinfelden more
2

chain cross conveyor Moehringer 14513800

Wiesentheid, GermanyGermany dealership location
6686 km
1990
used
Stock number: ame819 Fabrication: Moehringer Technical Data: Number of chain stands: 4 St. Vr280u Center distance: 2,00 m Chain distribution: 125 mm Lax strength: 40 x 10 mm Drive power: 4 kW Purpose of application: wooden planks more
1

Cross conveyor (12 m) Esterer 12/6

Bielefeld, GermanyGermany dealership location
6462 km
1980
used
Cross conveyor (12 m) SMA-REF-6053 Type: sawmill conveying, pushing, dumping Manufacturer: Esterer Model: 12/6 Year: 1980 Working range: Length: 12 m Width: 12 m Features: 6 strands Fall protection Condition: ready for action Mz2ch Location: Western Germany Availability: on demand Terms of delivery: ex works, free on truck Terms of payment: 100% before dismantling/loading more
4
DACHKETTENQUERFOeRDERER 2 7m long, 20m wide, 6 chains, 2.0 / / 1.5 / / 1,5 / / 1.0 / / 1,0 / / EUR 2 200-+ VAT M3tlh more
8
Stable cross conveyors for timber or model. Nfcm9 With 2 strands of chains. Length ca. 2.900 mm. chain gap 1,600 mm. rising from 400 to 1,150 mm. powered SEW geared motor 2,2 KW. Heavy chains with driver. more
6
Overtaken year: 2017 Length 4500 mm ld Width Šd 1500 mm distance of the poor tr 1400 mm height H2 1420 mm Beyl9rl Speed V 5-25 m / min -Electric motor 3 kW more
1
 Start Chat

Cross conveyor unb. unb.

Eriswil, SwitzerlandSwitzerland dealership location
6655 km
1998
used
Cross conveyor which lifted Year of construction 1998 L x W x H: 4150 x 3650 x 1500 mm Drive 1.8 kW Weight 4000 kg C7m2qad08 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4952 Eriswil/DE-79618 Rheinfelden more
1

Cross conveyor

Wiesentheid, GermanyGermany dealership location
6686 km
used
Strand spacing: 700x700x1200x1500 strand: 5 Wheelbase approx: 5500 mm Bsolbe more
1

Cross conveyor (6,5 m) 65/78

Bielefeld, GermanyGermany dealership location
6462 km
1985
used
Cross conveyor (6,5 m) SMA-REF-6091 Type: sawmill conveying, pushing, dumping Model: 65/78 Year: 1985 Working range: Length: 6,5 m Width: 7,8 m 9io8fyvik Features: 5 strands Condition: ready for action Location: Western Germany Availability: 11/2017 Terms of delivery: ex works Terms of payment: 100% before dismantling/loading more
4
Cross conveyor incline for sawn timber. With 5 necklaces're skeins colorway!. Length approx. 5.5 m. Stable. Gourad7 more
1
 Start Chat

Cross conveyor unb. unb.

Eriswil, SwitzerlandSwitzerland dealership location
6655 km
1978
used
Cross conveyor for removal of boards Cfq93wz L x W x H: 5 x 4 x 1 m Weight 3000 kg Built in 1978 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4952 Eriswil/DE-79618 Rheinfelden more
1

Cross conveyor, 5 strands QF 5

Bielefeld, GermanyGermany dealership location
6462 km
1980
used
Cross conveyor, 5 strands SMA-REF-6074 Type: sawmill conveying, pushing, dumping Model: QF 5 V0xjsc2r Year: 1980 Working range: Length: 4,40 m Width: 6 m Features: 5-strands-cross conveyor Condition: ready for action Location: Western Germany Availability: on demand Terms of delivery: ex works free on truck Terms of payment: 100% before dismantling/loading more
5
Very well-kept gate roller conveyor with hydraulic. Hub and countersunk cross conveyor. Length: approx. 11 m, roll length 1.90 m. Built-in cross conveyor with 5 strands of chains, hydraulic Bca9acjipe Heb and lowered. Model bearing hydr. Adjustable pick us. Roof cross conveyors with 5 strands of chains more
1

Cross conveyor f. edges (6 x 2,7 m) Linck 60/27

Bielefeld, GermanyGermany dealership location
6462 km
1980
used
Cross conveyor f. edges (6 x 2,7 m) SMA-REF-6070 Type: sawmill conveying, pushing, range: Length: 6,5 m Width: 2,6 m Features: 6-strands-cross conveyor Condition: ready for action Location: Western Germany Availability: on demand Terms of delivery: ex works Terms of payment: 100% before dismantling/loading more
8

Cross conveyor for cut goods Leisse QF 4

Scheinfelderstraße 12, 96160 Geiselwind, DEGermany
6695 km
excellent (used)
Cross conveyor for cut goods fully Verblecht. With 4 strands of chains. Conveyor length 3,350 mm. H2qhjwy7 Wide 4,850 mm. inch chain with driver. Drive with gear motor. It is possible also at an angle. more
1

Cross conveyor, 8 strands QF 8

Bielefeld, GermanyGermany dealership location
6462 km
1980
used
Cross conveyor, 8 strands SMA-REF-6075 Type: sawmill conveying, pushing, dumping Model: QF 8 Year: 1980 Cyzow0t8 Working range: Length: 6 m Width: 1,8 m Features: 8-strands-cross conveyor Condition: ready for action Location: Western Germany Availability: on demand Terms of delivery: ex works Terms of payment: 100% before dismantling/loading more
6

Cross conveyors for sawn timber Haist KV 5

Geiselwind, GermanyGermany dealership location
6695 km
used
Cross conveyors for sawn timber with 5 strands of chains. Width 2.0 m length 1, 50 m. Length: 4,10 m Ba8hx79m8m Chain spacing: 1,300-500-820-1,330 mm. With gear brake motor. more
1

Cross conveyor (5 m) 50/5

Bielefeld, GermanyGermany dealership location
6462 km
1985
used
Cross conveyor (5 m) SMA-REF-6093 Type: sawmill conveying, pushing, dumping Model: 50/5 Year: 1985 Working range: Length: 5 m Features: 5 strands Condition: ready for action Location: Western Germany Bao2mbms0i Availability: on demand Terms of delivery: ex works Terms of payment: 100% before dismantling/loading more
3

Roof cross conveyor EWD - Esterer QFD

Geiselwind, GermanyGermany dealership location
6695 km
1994
used
More stable well maintained roof cross conveyors. Full Verblecht. With 6 strands of chains. Length approx. 4.0 m. Length: approx. 6.0 m. M0qvp more
1

Cross conveyor, 6 strands Linck UGQF 6

Bielefeld, GermanyGermany dealership location
6462 km
1985
used
Cross conveyor, 6 strands SMA-REF-6071 Type: sawmill conveying, pushing, dumping Manufacturer: Linck Model: UGQF 6 Year: 1985 Working range: Bamygwmui3 Length: 6,5 m Width: 2,6 m Features: 6-strands-cross conveyor Condition: ready for action Location: Western Germany Availability: on demand Terms of delivery: ex works Terms of payment: 100% before dismantling/loading more
5

Splinters cross conveyor Linck SPQ

Geiselwind, GermanyGermany dealership location
6695 km
used
Splinters cross conveyor with Strip full taste metal. Length: 6,200 mm. width: 1.500 mm. height: 1500 mm. Complete with drive with gear motor. 92a8m2dvp more
1

Roller conveyor line with cross conveyor 10/120

Bielefeld, GermanyGermany dealership location
6462 km
1985
used
Roller conveyor line with cross conveyor (10 m) SMA-REF-6088 Type: sawmill conveying, pushing, dumping Model: 10/120 Year: 1985 Working range: Length: 10 m Width: 1,20 m Features: Bamyekdhiu Liftable cross conveyor Width: 2,8 m Condition: ready for action Location: Western Germany Availability: on demand Terms of delivery: ex works Terms of payment: 100% before dismantling/loading more
1

Cross conveyor f. sawn timber packing SH-QF 5

Bielefeld, GermanyGermany dealership location
6462 km
1985
used
Cross conveyor f. sawn timber packing SMA-REF-6083 Type: sawmill conveying, pushing, dumping Model: SH-QF 5 Year: 1985 Working range: Length: 4,25 m Width: 7,50 m D8spfo37e Features: 5-strands-cross conveyor Condition: ready for action Location: Western Germany Availability: 11/2017 Terms of delivery: ex works Terms of payment: 100% before dismantling/loading more
1
Elect./Voltage: 480 V, 60 Cy, 3 Ph. Bbu87jntsl SAG - TAGLIERINA, [...] Crosscut Flying Cutoff SawThis is a special Crosscut Saw for continually (non-stop) separating laminated boards automatically on the fly after a roll type laminating panel system. -- 66" Width capacity with on the fly feed rates between 70 - 145 FPM. -- 0.75 HP (0.55 kW) - 12,000 RPM, 4" dia. saw, driven on a fast rack belt system, on THK type ways. -- MAGELIS Control for fast setup and precise speed control. -- (7) F... more
18
Serial No. 25651231 Capacity 2500mm x 6.5mm Back gauge Programmable Rapid blade adjustment Yes Work supports 3 @ 3000mm Bcifs0rga2 Squaring arms 1 @ 2775mm Input 400/440/3/50 ac Clamps 12 x Hydraulic Height Length 12'4" / 3.75m x Width 21' / 6.4m Nett weight approx. 8.6 ton / 8740 kgs more
4

Multiple cross cut saw MWV 3-3500

Hardinxveld-Giessendam, NetherlandsNetherlands
6242 km
1996
good (used)
MWN multiple cross cut saw, type 3-3500 manufacture year 1996 Machine specifications: - max. cutting length 3500 mm - 3 moveable saw units - motor power each 7.5 kW - max. cutting height 150 mm - integrated transport belt for waste Bctebxyfe0 Complete with - roller conveyor for wood packages - infeed roller conveyor to multi ripsaw more
5
Roller conveyor, conveyor, roller conveyor, roller conveyor Unidcmb8q Roller width 600 mm Conveyor length 3400 mm Diameter role 84 mm -Achsabstand 270 mm adjustable Height 815 mm adjustable -angetrieben gear Gear motor 0.55 of kW speed 17 m / min Foot switch right/left rotation -1 x roller conveyors available Award pieces 3520/710/H900 dimensions mm Weight 260 kg more
15
Very compact calibration and fine grinding machine, wide belt sander Weber KLE 2000 A video of the current machine can be sent on request. Suitable ideal sanding machine for interior design companies, also for intermediate lacquer sanding Cross belt 9,2 kW with Elektronikschleifschuh 32 mm and Ellen Ribbon lamb Laengsschleifaggregat as a combined unit 11 kW, frequency controlled by 2-20 m/s, with calibration function (grooved steel contact roller) and pressure bar 32 mm Belt feed contin... more
5
Numbers of cross transfers:12 Stck. weight: kg weight of the machine ca.: t length roller conveyor:4300 mm width roller conveyor:230 mm Guiilw heigth roller conveyor:600 mm engine output:2,2 kW Number of motors:2 Stk. Kaltenbach cross transfer table segments, chain drive system 4300 mm x 230mm x 600 mm, separate waves with coupling, 2 drive motors, each à 2,2 kW more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Bbu8cyu82s DURA-QUIP VC-3532 VIBRATING CONVEYOR: -- Specifications:35" WIDE X 32' LONG; Pan is 7" deep and has 1/4" round holes punched plate in most of length to allow sawdust to drop outside of conveyor. -- Bottom frame is filled with concrete and rests on coil springs to isolate vibration from the ground. -- Includes; 10 HP TEFC 460V drive motor. more
6
Serial No. 2206 Capacity 520 mm diameter or 520 mm square Bciep8xtzg Twin Pillar yes Input 415/3/50 7.5 kw approx Speeds variable Vice opens 525 mm Twin vices yes Stroke of feed vice 450 mm Fitted with coolant and swarf conveyor Length 4.20 m Width 2.40 m Height 2.50 m more
3

Package cross-cut saw Holtec HF 121

Grevesmühlen, GermanyGermany
6540 km
excellent (used)
Holtec HF121 Bctdgt7ff9 more
5
Auger, feeding screw, screw conveyors, conveyor, pipe screw conveyors -Schnecke comes from the production of glass and quartz sand is transported -stable version -Einlauf diameter 275 mm Outlet flange diameter 245 mm Motor 7,5 kW Speed 24-133 RPM Diameter screw 210 mm Screw tube diameter 270 mm Srnq38 Length worm 5500 mm -Steigung worm 220 mm masterbar 6895/470/H1050 mm Weight 780 kg more
6
Kreuzbohrkopf with SK40 recording for SCM CNC angle unit for the recording of 4 drills and milling cutters Angle milling head 2 x Collet ER25, 16 mm 2 x collets ER32, 20 mm Unit can be rotated through 360 degrees C axis Ratio 1: 1.5 Speed maximum 16000 RPM The unit comes from a bankruptcy and has until recently on a SCM Routronic from BJ. 1996. Can be tried by us, because we have an other intake on our CNC. Includes instructions and detail drawing 8muzw07vq Please the PDF file wit... more
2
Length of roller conveyors - infeed: mm Length of roller conveyors - outfeed: mm Numbers of cross transfers: Stck. Tkgx2kk more
1
Elect./Voltage: 110 V, 60 Cy, 1 Ph. Bbvr7r7oge AUTO LABE 2 SIDED LABELING MACHINE is used to label plastic tubs for retail consumer goods. It will apply front and/or back product labels. Each head can be turned on or off. The top hold down belt was added for light weight products, but can be removed based on application. -- Machine runs well, clutch/motor assemblies were replaced in the last year. -- This unit is very similar to AUTO LABE's current Model 640 SE. more


cross conv...
daily

New machines via email!

Stay updated!

to

to

Edit search
CROSS CONVEYOR
SELL IMMEDIATELY
with Europe's market leader for as little as € 0,49 per ad.
Find out more


Phone: +1 312 94 04 581
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machineseeker chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close