Dematik faw 1 for sale

Identified location: Ashburn (US) (Edit)
Enter your address
or
Move
5

Bag filling machine FAWEMA FA 10

Pulheim, GermanyGermany dealership location
6395 km
1987
used
FA 10 – Flexibility at the Highest Level The concept for the FA 10 series of machines is based on the FAWEMA chamber transport system with effective product compacting. The most varied products – be they in powder or granular form – can be filled and processed in combination with suitable fillers. Outstanding Features High Flexibility through: possibility to change over to various format sizes various output levels wide range of application for products and packaging materials Universal App... more
2
Make Moco Maschinen, Type AZ 14 E/510, No 7970 AL 21612-1, New 2012, Material Stainless steel, Shredder , Double shaft , Rotor sizes +/- dia 300mm, Shredder surface +/-650x600mm, With hopper , Inlet 910x860mm, Outlet +/- 300x250mm, Motor 15,0 KW, 230/400 Volt, Rotor speed 23 omw./min, Mounted on frame , With switch , With switchgear , Floorspace 2,0x1,2 M, Total height 2,0 M, Weight 1500 KG What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared... more
2

Presetter GARANT VG1

Noord Brabant, NetherlandsNetherlands
6282 km
2016
as good as new (ex-display)
Pre-setting device VG1 (made of universtäit •15 inch touchscreen, intuitive and easy to use via icons. •With calibration device at the base reception. •Storage options. •Quick adjustment of both axes (X / Z) individually or simultaneously. •Fine adjustment of both axes (X /Z). •Spindle with 4-90° indexing and spindle brake. Measuring range X 400 mm Spindle load 100 kg Bfa3fky2nr Total width 1500 mm Measurement Image Processing 15" Touchscreen Measuring control PC measurement el... more
5

Plate Shear - Hydraulic WEINBRENNER TS 10

Niederlangen, GermanyGermany dealership location
6338 km
used
sheet width:3000 mm plate thickness:10 mm Bebzolx7x0 distance between columns:3100 mm throat:300 mm cutting angle:2°15' ° back stop - adjustable:600 mm oil content of tank filling:300 L total power requirement:ca. 22 kW weight of the machine ca.:12,7 t dimensions of the machine ca.:4,1x 2,0 x 2,7 m more
5
x-travel:700 mm y-travel:550 mm z-travel:500 mm feed speeds:1 - 2000 mm/min Table area:800 x 500 mm Uwwj7xe3s rapid traverse:5 m/min spindle turning speed range:25 - 3150 U/min spindle taper ISO:40 spindle diameter in front bearing:70 mm spindle motor:7 kW quill stroke:100 mm total power requirement:12 kW weight of the machine ca.:3,3 t dimensions of the machine ca.:3,5 x 2,8 x 2,1 m HEIDENHAIN TNC 355 CNC control for 4 axis NC table [...] swivelling Heidenhain touch probe coolant device, mot... more
6
Vehicle -Factory: Linde Type: H70T-01//HH 3.450 mm/side sliders -Drive type: Drift gas -Load capacity: 7000kg -Load focus: Gvtrhk -Lift height: 3450 mm -Range: 0 mm -Built: 2012 -Engine hours: 4196 -Internal No.: E0596 _____ Mastast data -Masttype: Standard -Lift height: 3450 mm -Height: 2900 mm -Free hub: 0 mm -Fork carrier: 0 mm -Forks: 1200 x 0 x 0 mm _____ Dimensions ... more
5

Beam coping machine Ficep 1201 RC

Köln, GermanyGermany dealership location
6408 km
2010
used
size of profile - max.:1220 Number of cutting torches: Stck. Cutting system:1 B3mpxlje max. length:12000 mm max. piece weight :6000 kg height of profile:80 mm profile width:mind. 45 mm profile width:max. 600 mm Ficep 1201RC coping robot system for coping of steel profiles, coping system with 6 positioning axis and length measuring system by gripper and 12 m each infeed-/outfeed roller conveyors more
2
Make Ferrum AG Rupperswil, Type POT-1000, No 47-1247/3, New 1983, Material Stainless steel 1.4435 (316L), Basket centrifuge (1x), Perforated basket , Basket sizes dia. 1000x430mm, Wall thickness 6mm, Max. loading weight 180 KG, Without motor , Floorspace 1,8x1,5 M, Total height 1,4 M, Weight 1600 KG What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination worldwide. You are welcome to inspect... more
5
total power requirement: kW weight of the machine ca.: t Bdvam3ndhj dimensions of the machine ca.: m Effective depth/ht.: 1000 mm Diagonal: 1600 mm Load Capacity: 2000 kg Wash Tank Data: Capacity: 2000 l Heater: 91 kW Pump: 30 kW Washing pressure: 7 bar Data Flushing Tank: Capacity: 1000 l Heater: 39 kW Pump: 7,5 bar Pressure: 4,5 bar the machine has worked in a multinational, therefore in good condition and has worked less than 4700 hours runni... more
5

Punching Press PEDDINGHAUS Hydraulic 1001

Niederlangen, GermanyGermany dealership location
6338 km
2001
used
pressure:100 t punching cross-cut in cmm:2430 mm² stroke:10 - 50 mm throat:510 mm Bebzocgydz Working height:1100 mm total power requirement:7,5 kW weight of the machine ca.:2,4 t dimensions of the machine ca.:1,8 x 1,0 x 2,1 m more


dematik fa...
daily

New machines via email!

Stay updated!
5
spindle diameter:115 mm D0ku8lop x-travel:2500 mm y-travel:2000 mm z-axis:1500 mm W-axis (spindle longitudinal):750 mm B-axis (table):360.000 x 0,001 ° Table dimensions:1600 x 1400 mm table load:8 t spindle taper: ISO:50 spindle drive motor:24 kW spindle turning speed range:10 - 2000 U/min tool piece magazine with:48 weight of the machine ca.:24 t total power requirement:70 kW dimensions of the machine ca.:5,7 x 6,2 x 3,7 m Machine mechanical overhould and retrofit in 2006 with new motors, s... more
6
Vehicle data - make: Toyota - type: 8FBET16 / / HH 3,300 mm / FH 1.600 mm / duplex / Sideshift / container capable - drive type: electric - load capacity: 1600 kg - load Centre of gravity:-lifting height: 3300 mm - range: 0 mm - year: 2013 - operating hours n: 8327 - internal No.: E0506 _ Mast data - mast type: duplex - lifting height: 3300 mm - height: 2120 mm - free lift: 1600 mm - carriage: 0 mm - forks: 1400 x 0 x 0 mm _ Dimensions - length: 0 mm - width: 0 mm - height: 2120 mm - weigh... more
4
screw size:30 mm Bdwqo9ro3s injection shot weight in Polysterol:65 g/PS closing pressure:400 kN daylight:270 x 270 mm opening stroke:350 mm mould height - Max./min.:200 mm control:Selogica (1. Version) daylight between platens - max.:550 mm total power requirement:21 kW weight of the machine ca.: t dimensions of the machine ca.:4,30x1,60x2,08 m few operation hours - condition like new - - wear reisistant plastification unit - fully hydraulic clamping unit - with Vario system - mould blow u... more
2
Temperating machine "Recooling plant", Extra Specifications Typ GHKV 3412 Cooling capacity: 500 kW Amount cooling water; 45m3 Cool water input: 31°C Cool water Output: 21°C Tank: 2x3000 Liter with Chiller Typ EKSSP 35 TK,Cooling capacity: 35,2 kW,Refrigerant: R404a ( 122 kg ),Cooling medium: saltwater with 80% PEKASOL 2000 What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination worldwide. ... more
11

Laser cutting machines Prima Industrie Platino 1530

Kaiserslautern, GermanyGermany dealership location
6526 km
2007
ready for operation (used)
General Data Measurements width 9500 mm Measurements depth 3500 mm Measurements height 2500 mm Machine weight 10000 kg Control Unit Brand PRIMACH Model 20L Main Drive Plasma brand CP 4000 Plasma power 4 kW Berx9wqye7 Movement X-Axis Movement 1500 mm Y-Axis Movement 3000 mm Max Material Thickness Steel 20 mm This Prima Industrie Platino 1530 Laser Cutting Machine was built in 2007 in Italy and has been working for 32767 hours. Equipped with a PRIMACH 20L control unit , this machine ca... more
4

Jig Boring Machine HMB PBM 1000/60

Niederlangen, GermanyGermany dealership location
6338 km
1996
used
spindle diameter:60 mm 89f08dc9n x-travel:max. 1000 - min. 100 mm y-travel:max. 1000 - min. 100 mm bore capacity in steel:max. 40 mm thread capacity:max. M24 Thickness:max. 60 - min. 5 mm spindle turning speed - stepless:einstellbar 1 - 1.000 U/min feed stepless:einstellbar, Eilgang 1 - 10.000 mm/min feed stepless:einstellbar, Arbeitsgang 1 - 1.000 mm/min feed power:16 KN tool taper:SK 40 spindle stroke:600 mm positioning speed:in allen Achsen 1 - 10.000 mm/min positioning accuracy:auf 300 m... more
5

Lateral Milling Machine JOBS JOMACH 159

Mönchengladbach, GermanyGermany dealership location
6363 km
2005
used
x-travel:18000 mm y-travel:2500 mm z-travel:1250 mm spindle motor:31 kW spindle turning speed range:10 - 10000 U/min spindle taper::HSK A 80 number of tools:104 :A-Achse +100/-90 c-axis:+/- 200 ° feeds:1 - 16000 mm/min rapid traverse::16 m/min weight of the machine ca.:72 t total power requirement:65 kW M27qp dimensions of the machine ca.:25,5 x 10,0 x 5,2 m Machine equiped with SIEMENS 840 D control for 5 axis - NC 2-axis fork type milling head - BALLUF tool identification system - MARPOSS ... more
6
Vehicle data - make: Toyota - type: 02-8FGF25 / / HH 3,700 mm / FH 1,800 mm / duplex / 3rd and 4th valve-very good condition - drive type: gas - load capacity: 2500 kg - load Centre of gravity:-lifting height: 3700 mm - range: 0 mm - built: 2012 - s ebsstunden: 6237 - internal No.: E0241 _ Beilcizdhg Mast data - mast type: duplex - lifting height: 3700 mm - height: 2380 mm - free lift: 1800 mm - carriage: 0 mm - forks: 1200 x 0 x 0 mm _ Dimensions - length: 0 mm - width: 0 mm - height: 23... more
5
work piece width:1000 mm workpiece height:500 mm Bey3o3l bore diameter:40 mm The Kaltenbach CNC beam saw drill line type KBS 1001 DG / KD 1015 is built in 2004 and is ideally suited for the steel construction and steel trading industry. consisting of: Horizontal miter band saw Kaltenbach KBS 1001 DG with double miter swiveling at + 60 / -45 degrees. The Kaltenbach KD 1015 beam drill line is equipped with 3 drill spindles and has a 5-unit tool changer per axis, each for 10 to 40 mm drills. HSS ... more
2
Make [...] Reimelt KG, Type 1-941-356, No V6563D, New 1987, Material Aluminium, Stainless steel, Pre-mixer , Capacity 1000 Ltr, Vessel diameter 900mm, Cylindrical height 1000mm, Conical height 900mm, Inlet dia.110mm, Outlet DN100, Working pressure atm, Max. temperature 80 [...] Motor 2/2,6 KW, 380 Volt, Mounted on legs , Floorspace 1,4x1,1M, Total height 2,5 M What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shi... more
15
Swingmeselstemmer STV170 by Maka This machine is used frequently in window construction, but also in other areas of wood processing Engine power 2.5 kW Stemm feed infinitely adjustable Link-Right Run 3 pneumatic factory tueckandruecker Automatic flow of clamping and steming by two-hand operation Manual spatout Tip mode to set up Control panel swivelling Suction nozzle approx. 120mm Emergency-off button Manual 9 Stemmmeissel Umudfcr2 Adjustment theory The machine was obvious... more
5
x-travel:500 mm y-travel:380 mm Iyvxqdphw z-travel:300 mm distance between table/spindle:540 mm table surface area:650 x 380 mm table load:200 Kg tool taper:SK 30 spindle turning speed range:60 - 6000 U/min feed speeds:1-5000 mm/min rapid traverse X,Y:20 m/min rapid traverse Z-axis:20 m/min spindle throat:345 mm spindle drive:5,5 kW Tool changer:10 Stationen diameter of tools max.:80 mm tool length - max.:200 mm weight of tools max.:18 kg tool changing time:7 sec total power requirement:13,5... more
5
table diameter:1400 mm x-travel:2200 mm y-travel:1200 mm z-travel:1100 mm c-axis:360.000 x 0,001 b-axis:+/- 60 ° w-axis:350 mm distance spindle center to column::1100 mm table load:6 t spindle drive:15 kW S3tz8h Torque:4600 nM spindle turning speed range:10 - 1600 U/min spindle taper ISO:50 no. of tools in the magazine:20 Stück total power requirement:45 kW weight of the machine ca.:30 t dimensions of the machine ca.:5,8 x 5,8 x 4,9 m Machine complete overhould and retrofit in 2001 with SIEM... more
6
Vehicle data - make: Linde - type: H16T-01 / / HH 6.470 mm / Sideshift / triplex / good condition - drive type: gas - load capacity: 1600 kg - load Centre of gravity:-lifting height: 6470 mm - range: 0 mm - built: 2013 - operating hours: 13181- Internal No.: E0429 _ Mast data - mast type: triplex - lifting height: 6470 mm - height: 2830 mm - free lift: 0 mm - carriage: 0 mm - forks: 1200 x 0 x 0 mm _ Zjoz0wld Dimensions - length: 0 mm - width: 0 mm - height: 2830 mm - weight: 3075 kg _ ... more
7
Max bending length: 1280 mm Max sheet strength: 3.5 mm steel W78t8 Manually adjustable rear strike Bending angle adjustable via potentiometer more
2
Make Thyssen Henschel, Type FM 10 C, No 801320, New 1988, Material Stainless steel 1.4541 (321), Hot mixer , Capacity 9 Ltr (6 Ltr effective), Vessel sizes dia 270mm, With jacket 2,2 Ltr (materiaal St 37.2), Working pressure 2,5 bar, Test pressure 3,2 bar, With motor 4,0 KW, 380 Volt, With variable speed drive , Rotor speed 380 - 3800 rpm, Pneumatic operated outlet , Outlet dia.83mm, Mounted on frame , With switchgear , Floorspace 1,0x0,8 M, Total height 1,2 M, Weight 200 KG, Extra Specification... more
5
x-travel:630 mm y-travel:400 mm z-travel:425 mm spindle taper ISO:40 turning speed range:30 - 10500 U/min Gr7vrfq tool magazin:36 Pl. spindle diameter:70 mm total power requirement:38 kW spindle motor:26 kW weight of the machine ca.:6,0 t dimensions of the machine ca.:2700 x 1700 x 2900 mm more
5

Slip Grinding Device RÖSLER RM 100 A/SM

Niederlangen, GermanyGermany dealership location
6338 km
1985
used
filling capacity:100 l Nkfd2 power capacity:0,75 kW tank shape:rund rotary speed of motor:1500 / 1000 U/min weight of the machine ca.:0,3 t dimensions of the machine ca.:1,5 x 1,0 x 1,2 m more
1
Gêbr. Universal console milling machine Fabr. WANDERER Works Type KFEV1 TECHNISCHE DATEN Size of table surface 1550 x 315 mm Distance between water drains 1000 mm I3elqeb Trajectories automatisch/v Hand X, Y, Z 730 (750) x 240 (260) x 400 (420) Path of Pinole 80 mm Tool recording vertically/horizontally ISO40 Diameter of the milling spindle 70 mm Spindle speed vertical/horizontal 45-2000 U/min Subfront X, Y-axis 16-710 mm/min Subfront Z-Axis 8-355 mm/min Rush X/Y/Z-Axis 4000... more
6
Vehicle data - make: Linde - type: L12 LS / / 493 h / HH 1730 mm initial lift - type of drive: electric - load capacity: 1200 kg - load Centre of gravity: 600 mm - height: 1730 mm - range: 0 mm - year: 2008 - operating hours: 493 - internal No.: C0327 _____ Ftz3je2 Mast data - mast type: standard - height: 1730 mm - height: 2030 mm - free lift: 0 mm - carriage: 0 mm - forks: 1150 x 0 x 0 mm _ Dimensions - length: 0 mm - width: 0 mm - height: 2030 mm - ... more
5
Max bending length: 1020 mm Bfaws0iro0 Max sheet thickness: 1 mm steel Right- and left-hand running via foot switches Roller diameter: 50 mm more
2
Make GMF Gouda, Type NPD 1,6 W, New 1991, Material Stainless steel 1.4571 (316Ti), Paddle dryer , Double shaft , Continuous , Capacity 22 Ltr, Trough sizes 1700x300mm, Inlet dia.200mm, Outlet +/-dia.200mm, Working pressure 12 Bar, With jacket 13 Ltr, Shaft can be heated , Max. temperature 220 degr.C, With adjustable packing glands , Motor 2,2 KW, 230/400 Volt (ex), Mounted on frame , Floorspace 3,4x2,1 M, Total height 2,2 M, Weight 1000 KG What you can expect from Foeth: all our machines are in ... more
9
Machine no. 0-253-09-1407 Working piece length 20-1250 mm Working piece width 50-800 mm Bebknu9lbn Working piece thickness 10-60 mm Horizontal drilling gear with 1 spindle Glue and dowel unit Glue nozzle which is able to adjust the amount of glue applied Dowel dimensions 8x30 mm / 8x35 mm Control PowerControl System WoodWop Weight 1500 kg Dimensions (L x W x H) 2250 x 1540 x 2285 mm Location D-85469 Walpertskirchen, Germany (Subject to errors, technical modifications and prior... more
5

Center Lathe MEUSER MOL 1500

Niederlangen, GermanyGermany dealership location
6338 km
1970
used
turning diameter over bed:480 mm turning diameter over slide rest:300 mm Nnfj9 turning length:1500 mm spindle bore:46 mm total power requirement:4,5 kW weight of the machine ca.:2,8 t dimensions of the machine ca.:2,8 x 1,1 x 1,5 m more
6
Circle cutter with manual drive FASTI type 501 size 2 Masch. No. 6352034 built in circa 1975 Thickness of 2 mm Maximum Ronde diameter 1000 mm (Qudratzuschnitt) Maximum Ronde diameter 1300 mm (Octagon cut) Minimum Ronde diameter 100 mm Projection of the Terminal tip 720 mm 2rbsnu Projection of the cutting wheel 280 mm -Drive of the cutting wheels with hand crank -Terminal head with thread -on table pedestal (900 x 1200 mm) Dimensions L x W x H 1500 x 900 x 1150 mm Weight 400 kg good... more
6
Vehicle -Factory: Linde Type: L 20//0 hrs/HH 3.170 mm/FH 1,600 mm/New Device/Duplex/Battery BY. 2016 -Drive type: Electric -Load capacity: 2000kg -Load focus: -Lift height: 3170 mm -Range: 0 mm -Built: 2016 -Engine hours: 0 -Internal No.: E0603 _____ Mastast data -Masttype: Duplex -Lift height: 3170 mm -Height: 2100 mm -Free range: 1600 mm -Fork carrier: 0 mm -Forks: 1200 x 0 x 0 mm _____... more
6

FANUC ALPHA 1iA - 1999 Wire cutting EDM machine FANUC ALPHA 1iA

Rolle, CH, SwitzerlandSwitzerland dealership location
6572 km
1999
ready for operation (used)
MACHINE STILL WORKING AT CUSTOMER SITE. Well maintained with 12'000 working hours Pc2n2gug [embed]https://youtu.be/9V5BI-codyE[/embed]   more
2
Make Pfaudler-Werke Gmbh, Type BE12500, No 132186, New 2005, Material Stainless steel, Lining material Glass - Enamel (PPG), Reactor , Capacity 14360 Ltr, Dished bottom , Dished top side , Manhole dia.700mm, Top connections (4x) dia.300mm, (5x) dia.200mm, Outlet dia.150mm, Working pressure vacuum /6 bar, Test pressure 7,7 bar, With jacket 1199 Ltr, Working pressure vacuum /6 bar, Test pressure 8.8 bar, Max. temperature -25 / 200 [...] With propellor stirrer , With paddle stirrer , Motor 30 KW, 4... more
4
No.: 103 Manufacturer: MTF technique Type: NL-TF 110 Performance: 7rgvdhuk8 0.18 KW Connection type: 230V SCHUKO plug connection cable: 4 m Band speed: 1.4-6.9 m / min Dimension: flat belt length = 500 mm Steep belt length = 1.000 mm Width: 330 mm Band width: 300 mm Width: 110 mm Guide profile height: 80 mm Measure bottom/top funnel: 392 mm - 492 mm Drive shaft: Type: rectangular tunnel Number: 36 PCs. Material: PU (polyurethane) Gallery height: 10 mm Tunnel ... more
14

Laser cutting machines LVD IMPULS 8031

Kaiserslautern, GermanyGermany dealership location
6526 km
2006
ready for operation (used)
General Data Measurements width 22000 mm Measurements depth 8700 mm Measurements height 2500 mm Uwnki2ow Control Unit Brand FANUC Model 160 iLB Main Drive Laser power 4 kW Laser type CO2 Laser brand FANUC C4000 E Movement X-Axis Movement 3150 mm Y-Axis Movement 4070 mm Z-Axis Movement 280 mm Workpiece Workpiece weight 4800 kg Table Outer length 8000 mm Outer width 3000 mm This LVD IMPULS 8031 Laser Cutting Machine was manufactured in Belgium in 2006. Operated through a FANUC 160 iLB Contr... more
6
Boilerplate - Web text Radial fan type VTZ 560/63/1-W Bfjmzx8e Fabr. No. 2 / 569/92 model year 2002 = 136.8 m3/min. air volume 2.28 m3/s = 8200 m3/h Total pressure difference PA 4200 Density 1.2 kg / m3 Air inlet ø 300 mm Air outlet ø 280 mm Fan speed 2920 RPM. Engine speed RPM 2930. Motor power 18.5 kW Power supply 400 v 50 Hz -Grey lacquered Weight approx. 400 kg very good condition more
6
Vehicle -Factory: Clark Type: TMC 18//611 hrs/4,781 mm/FH 850 mm/side slider/container capable/triplex -Drive type: Electric -Load capacity: 1800kg -Load focus: -Lift height: 4781 mm -Range: 0 mm -Built: 2001 -Engine hours: 611 -Internal No.: E0589 _____ Mastast data -Masttype: Triplex -Lift height: 4781 mm -Height: 2100 mm -Free hub: 850 mm -Fork carrier: 0 mm -Forks: 1200 x 0 x 0 mm _____... more
15
Make: Boschert Type: Combicut TWIN 1500 Built: 2007 Working range: 2500 x 1250 mm Plasma capacity: 160 A Max sheet thickness: 12 mm pliers opening Max sheet length: 9999 mm by resetting Max plasma cutting capacity: 35 mm Fn2zwrx Max punching force: 280 kN Max workpiece weight: 200 kg Max positioning speed: X- axis 60 m/min Max positioning speed: Y- axis 60 m/min Max stroke sequence punching: 400 rpm Max punch ing diameter: 105 mm or any shape within 105 mm Dimensions: approx. L 7.... more
2
Type MGI-314, No 0488114, New 1988, Material Stainless steel, Granulating sieve (1x) make Frewitt Fribourg, Rotor sizes dia. 122x200mm, Inlet dia. 250mm, Motor 3,0 KW, 400 Volt, With variable speed drive , Mounted on wheels , With switchgear , Floor space 1,0x0,8 M, Total height 1,3 M What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination worldwide. You are welcome to inspect our machines i... more
8
The band is suitable for hooks as the belt with a bar to the baffle covered length 1400 mm Width: 200 Gripgurt Nkzlv Adjustable belt speed Separator role 220 V more
11

Machining centers (universal) Breton Matrix 1000 2T DY

Kaiserslautern, GermanyGermany dealership location
6526 km
2012
ready for operation (used)
General Data Measurements width 5700 mm Measurements depth 5300 mm Measurements height 5300 mm Machine weight 33000 kg Control Unit Brand Heidenhain Model TNC 530 CNC main language German CNC language customizable Yes Main Drive Number of spindles 1 Spindle speed range 18000 Movement X-Axis Movement 2200 mm Y-Axis Movement 2500 mm Z-Axis Movement 1000 mm A-Axis Movement minus 105°, plus 120° C-Axis Movement endless Workpiece Workpiece weight 100000/m2 Table Outer length 3000 mm Outer width ... more
4
We offer for sale: -File storage - archive shelving shelving rack Total amount: 2,000 floors, 320 frame Dismantling: Bank central warehouse Mainz Kastel Technical details: PLUG-in SYSTEM FA. Zippel Year of construction: 2006 Condition (as new) 1 double shelf series 2 x 10 m Shelving rack file shelf archive shelf for ca. 1.440 DIN A4 folder Dimensions: 22 stand, approximately 1,950 x 300 mm 120 shelves, approximately 1,000 x 300 mm (... more
6
Vehicle data - make: BT - type: SWE 200 D / / 2911 hours / initial lifting / HH 2000 mm - type of drive: electric - load capacity: 1000 kg - load Centre of gravity:-lifting height: 2000 mm - range: 0 mm - year: 2011 - operating hours: 2911 - internal No.: C0294 _____ Cbqmujck Mast data - mast type: standard - height: 2000 mm - height: 1550 mm - free lift: 0 mm - carriage: 0 mm - forks: 1150 x 180 x 60 mm _ Dimensions - length: 0 mm - width: 0 mm - heig... more
1

Cutting line Polar 176 XT-AT-Pace

Verl, GermanyGermany dealership location
6460 km
2010
good (used)
Monitor Program Compucut + P-Net Airtable Autotrim Transomat loader 3BL 160-7S 7hhi9vqxj Transomat unloader ER 160-6 Pressstation PST-7S Autoturn 7S-Pace Autotrans M Format 7S-Pace Automatic waste removal Available: immediately more
2
Make Lenzing Technik GmbH, Type Optifil 150-0270-0C, No 1517, New 2012, Motor 0,75 KW, 230/400 Volt (Atex), Material Stainless steel 1.4571 (316Ti), Sieve dimensions (meter) undefined, Filter "Automatic backwash filter" (1x), Floor space 1,2x0,9 M, Total height 1,3 M, Extra Specifications Capacity 31 Ltr, Working pressure 10 bar (test pressure 15,8 bar) Max. Temperature 150 Degr. C., Rotor speed ± 52 Rpm What you can expect from Foeth: all our machines are in working condition, and at a reduced... more


dematik fa...
daily

New machines via email!

Stay updated!

to

to

Edit search
DEMATIK FAW 1
SELL IMMEDIATELY
with the world-wide market leader from 0,79 EUR per listing.
Find out more


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our app for used machines now!
Machineseeker app for iPhone and Android.