Used Demag for sale (520)

Condition: used, mileage: 221,291 km, Year of construction: 2009, operating hours: 15,356 h, Drivetrain Drive: Wheel Weights Empty weight: 22.000 kg Functional Lifting capacity: 30.000 kg Identification Serial number: 86584 Other information Front tyres / undercarriage remaining: 70 Gijdpfewwqbyex Aa Ajr Rear tyres remaining : 70 Tyre brand: Bridgestone Carrier engine: - Upper engine: - Counterweight: 0 Transport dimensions (LxWxH): 8.3x2.4x3.45 Additional information Please contact PFEIFER GROUP for more information

Condition: good (used), Crane remote control, crane control, crane control, pendant control, control switch, control cylinder -Manufacturer: Demag, control switch for crane remote control -Type: DST7SP222 BE Giedpfx Aasyzyyas Asr -Identification number: 874 558 44 -Buttons: 1x emergency stop, 6 buttons 2-stage -Transport dimensions: 590/94/H90 mm -Weight: 2.4 kg

Condition: good (used), Year of construction: 1993, Overhead crane, crane, trolley, crane running gear, crane trolley, girder trolley, head girder for bridge cranes, ceiling crane head girder, head girder single girder bridge crane -Manufacturer: Demag, 1 set of end girders for single girder bridge crane Giedpfxoyzw Iue Aa Ajr -Type: ELV -Load capacity: kg -Carrying rollers: Ø 160 mm -Hole spacing: 290 mm Ø 20 mm / Dimensions see photos -Transport dimensions: 2355/365/H245 mm -Weight: 302 kg

Condition: good (used), Year of construction: 2011, Column jib crane, overhead crane, workstation crane -Large base plate: 2000 x 1140 mm -Load capacity: 1000 kg -with chain hoist: Demag type DCS-PRO 10-1000 1/1 H5 VS6-11 year of manufacture 2011 -Main stroke: 6 m/min Giodpsxzt Nfefx Aa Aor -Drive system: Demag type E22, year of manufacture 2011 -Travel speed: 24.0/6.0 m/min -Projection: 3860 mm -Total height: 4470 mm -Height of lower edge of boom: 4060 mm -Hook height: 3510 mm -Swivel range: 270° -Transport dimensions: 4470/2000/H1450 mm -Empty weight: 1004 kg

Condition: used, Demag PK 10 N electric chain hoist with electric trolley complete Giodpervkanefx Aa Aor

Condition: good (used), Year of construction: 1986, Mannesmann Demag single electric chain hoist load capacity 1000 kg + load capacity 2000 kg with trolley electric or manual trolley We have 10 cranes in stock. Godpergrp Sofx Aa Aoir

Year of construction: 1995, condition: used, Demag crane rail KBK II length 7000 mm with ceiling mounting + electric chain hoist 125 kg but there is also the possibility for 250 kg Giedsh Dwhrepfx Aa Aor

Condition: excellent (used), DEMAG Chain Hoist Type PK 2N-F Stock number (1221) Lifting capacity 500 kg 2 lifting speeds: 5/1.25 m/min. 380 Volt 2.2 / 1.5 Ampere Lifting height 4.5 meters Giodpoyy S Tijfx Aa Ajr

Condition: good (used), Year of construction: 2004, Demag Concept 125/475-320 Clamping force: 125 tons Gsdpfx Aaexd Sz Ej Aeir Distance between tie bars: 475 x 475 mm 2 x core pullers on movable platten \+ Robot Demag W621-1831: X-550, Y-1000,Z-2000 (2004)

Condition: used, Year of construction: 2010, operating hours: 47,000 h, clamping force: 320 kN, displacement volume: 891 cm³, injection pressure: 2,420 bar, overall weight: 17,300 kg, screw conveyor diameter: 60 mm, terms of delivery: EXW (ex Works) delivery time: on request Gedpfx Ajx E A Twsa Ajir terms of payment: 100% prior to delivery

Condition: used, Year of construction: 2007, operating hours: 67,000 h, clamping force: 250 kN, displacement volume: 530 cm³, injection pressure: 2,426 bar, overall weight: 14,200 kg, screw conveyor diameter: 50 mm, Freight base: FCA Pegnitz Delivery time: by arrangement Giedpfxewlkcaj Aa Asr Payment terms: 100% before takeover of the machine, net

Condition: used, Year of construction: 2007, operating hours: 67,000 h, clamping force: 250 kN, displacement volume: 530 cm³, injection pressure: 2,426 bar, overall weight: 14,200 kg, screw conveyor diameter: 50 mm, Payment terms: 100% net before taking delivery of the machine Delivery time: by arrangement Gijdpfxowz R Iuo Aa Asr Freight basis: ex-works

Condition: good (used), Crane remote control, crane control, crane control, pendant control, control switch, control cylinder -Manufacturer: Demag, control switch for crane remote control with cable Giodoxzqp Ajpfx Aa Aer -Type: DST 6 -Connector: 16-pin -Crane remote control: 2 steps below the switch each -Transport dimensions: 870/360/H140 mm -Weight: 6.1 kg

Condition: used, Crane remote control, crane control, crane control, pendant control, control switch, control cylinder -Handover: in its current condition as seen, see photos -Condition: Switching elements are missing, see photos -Manufacturer: Demag, control switch for crane remote control with cable Giodpfsxzq Sqox Aa Ajr -Type: DSE -Connector: 16-pin -Transport dimensions: 600/330/H140 mm -Weight: 3.5 kg

Condition: good (used), Year of construction: 2005, Clamping force: 200 t Screw diameter: 50 mm Screw dia 2 : 22 mm Distance between tie bars V: 580 mm Distance between tie bars H: 580 mm Type: Multicomponent (2K injection) Drive: Hydraulic Gijdpfx Aaoyz Tmye Asr 2x hydraulic valve

Condition: used, Electric chain hoist crane DEMAG type PK1N-F Serial No. 1498030 Load capacity: 125 kg Hook travel: 4 meters Distance from suspension to load hook: 410 mm Lifting speed: 8 m/min Fine lifting speed: 2 m/min Pendant cable length: approx. 1.1 meters Power supply: 380 Volt, 50 Hz 1 chain fall = 125 kg - Emergency stop Weight: 20 kg Good condition Gsdpeyy Df Refx Aa Aoir

Condition: ready for operation (used), Year of construction: 2008, operating hours: 57,628 h, clamping force: 800 kN, screw diameter: 35 mm, injection weight: 149 g, This DEMAG SYSTEC 80/420-310 was manufactured in 2008. It features a clamping force of 800 kN and a screw diameter of 35 mm, making it suitable for processing various materials such as PA, PP, PE, and ABS. The machine includes a Wittmann linear robot and a Gravimax 14R gravimetric blender. If you are looking to get high-quality injection moulding capabilities, consider the DEMAG SYSTEC 80/420-310 hydraulic injection moulding machine we have for sale. Contact us for further details. • Processed materials: PA, PP, PE, ABS • Cylinder temperature: up to 450°C • Tie bar distance: 420 mm Godpfxsyyyuuo Aa Aoir • Injection unit: 310 • Control system: CDIAS / NC5 • Total operating hours (SPS): 108,544.0 h • Drive operating hours: 57,628.7 h • Heating operating hours: 73,426.7 h • Total cycle counter: 5,058,031 • Voltage: 400 V • Frequency: 50 Hz • Current: 114 A • Max pressure (Pmax): 235 bar • Max flow (Qmax): 104 l/min • Installation height of the tool: 300 mm • Maximum distance between tool mounting plates: 750 mm • Availability: Mid 2026 Additional equipment • Wittmann linear robot (Handling/Robot) • Gravimax 14R gravimetric blender • TORO-systems material loader

Condition: ready for operation (used), Year of construction: 1999, clamping force: 1,500 kN, screw diameter: 45 mm, injection weight: 320 g, This 3-axis DEMAG ERGOTECH 1500-840 was manufactured in 1999. It features a clamping force of 1500 kN and a screw diameter of 45 mm, making it suitable for processing various materials such as PA, PP, PE, and ABS. The machine has a maximum pressure of 190 bar and a stroke volume of 358 cm³. If you are looking to get high-quality injection moulding capabilities, consider the DEMAG ERGOTECH 1500-840 hydraulic injection moulding machine we have for sale. Contact us for further details. • Stroke volume: 358 cm³ • Materials processed: PA, PP, PE, ABS, etc. • Cylinder temperature: up to 450 °C • Max pressure: 190 bar • Max flow (Qmax): 114 l/min • Power supply: 3x400 V • Frequency: 50 Hz • Total connected load: 78.3 A • Motor load: 41.0 A • Heating load: 37.3 A Giodpfxjyyyn Ue Aa Ajr • Pump load: 41.0 A • Machine weight: 7.7 t • Year of production: 1999 • Availability: Mid 2026 Additional equipment • Handling system: Wittmann linear robot • Wittmann W621 (1999) • X-stroke: 550 mm • Y-stroke: 1200 mm • Z-stroke: 2000 mm • Weight: 300 kg • Wittmann W633 • Robot No: W633 • X-stroke: 500 mm • Y-stroke: 1400 mm • Z-stroke: 2000 mm • Weight: 475 kg • Wittmann W743 • Robot No: W743 • X-stroke: 1200 mm • Y-stroke: 2000 mm • Z-stroke: 4000 mm • Weight: 835 kg • Connected load: 18 A / 12.5 kVA • Voltage: 400 V

Condition: excellent (used), Year of construction: 2014, Clamping force: 650 t Screw diameter: 60 mm Distance between tie bars V: 1020 mm Distance between tie bars H: 1020 mm Working hours: 50.000 h Type: Horizontal Drive: Hydraulic \+ Cooling water flow controller (2x 6 circuits) Gedpfxeyzylve Aa Aeir \+ Robot Sepro SR SDR5X35 HL S5 TRANS (2014) \+ 2x Magnetic platten

Condition: ready for operation (used), Year of construction: 2005, clamping force: 5,000 kN, screw diameter: 70 mm, injection weight: 1,230 g, This 3-axis DEMAG Erdotech 500-3300 hydraulic injection moulding machine was manufactured in 2005. It features a screw diameter of 70 mm and a shot weight of 1,230 g. The machine has a maximum daylight of 1,450 mm and includes a handling system with a Wittmann linear robot. If you are looking to get high-quality injection moulding capabilities, consider the DEMAG Erdotech 500-3300 machine we have for sale. Contact us for further details. • Distance between tie bars: 900 mm • Min. mould installation height: 400 mm • Max. daylight (distance between platens): 1,450 mm • Centering ring: 160 mm • Core pull: 2-circuit core pull control (plus 1 extra core pull mentioned) • Control system: Demag NC4 Additional equipment • Handling unit: Wittmann linear robot, 3 axes (X/Y/Z linear) • Granule feeder: Wittmann, Typ VITMAX A312-Y (24 V, 1 A) • Hot runner controller: Gammaflux, Typ GM1G030F012S4EJ Gedeyycu Depfx Aa Aoir

Condition: used, Low-priced from company liquidation Giedpfx Asyyarmsa Aer

Condition: excellent (used), Demag crane P-Zug 3.2 t – Type P208H11, four-strand, with fast and precision lifting. Length: 1150 mm, height: 350 mm, width: 330 mm. Godoyxbxxspfx Aa Aeir

Year of construction: 1999, condition: ready for operation (used), Hydraulic injection moulding machine manufactured in 1999. This DEMAG Ergotech 150-610 Viva features a screw diameter of 45 mm and a maximum daylight between platens of 850 mm. It has a shot weight of 260 g and a maximum mold installation height of 250 mm. If you are looking to get high-quality injection moulding capabilities, consider the DEMAG Ergotech 150-610 Viva machine we have for sale. Contact us for further details. Gsdsyxrt Topfx Aa Aeir

Condition: good (used), Friction wheel, running wheel for bridge crane, bridge crane, overhead crane, assembly crane, workstation crane, wheel block, wheel block system, wheel block system -Manufacturer: Demag, Wheel block for crane chassis -Type: unfortunately no exact type designation Godjw Uxt Rspfx Aa Aeir -Wheel: Rail width intermediate dimension 48 mm -Hole: Ø 30 mm, dimensions see photos -Quantity: 2 pieces available -Price: per piece -Dimensions: 220/97/H160 mm -Weight: 8.5 kg/pc.

Condition: used, Year of construction: 1978, Technical details: lifting capacity: 0,25 t height lower edge cantilever arm: 3450 mm cantilever arm length from center column: 3000 mm column diameter: 194 mm Gedpfju Szhpex Aa Asir rotation: ca. 100 ° There are 3 column-mounted slewing cranes available for sale from Leipzig. ( price per piece) 2 column-mounted slewing jib cranes (No. 3 and No. 4) refurbished and 1 column-mounted slewing jib crane (No. 5) as is/is, without refurbishment. Demag-PK2 N-F hoist, 250kg lifting speed 10 m/min; fine lift 2.5 m/min. Load chain single chain; see type plate; control via pendant control, mobile manual at column base no. 3 and no. 5 is foot plate with 580 x 580 x 20 mm and at no. 4 foot plate 400 x 400 mm beam Column i.D. *