Used Demag Df 110 C for sale (504)

Condition: ready for operation (used), Year of construction: 2020, operating hours: 8,000 h, General Data Measurements width 1264 mm Measurements depth 4308 mm Measurements height 1779 mm Machine weight 4200 kg Injection Unit Screw diameter 25 mm Shot weight 46 g Heating capacity 5.7 kW Nozzle pressure 30 kN Clamping Unit Clamping force 500 kN Max open daylight 710 mm Distance between bars 370 x 370 mm Mould height min 200 mm Mould height max 410 mm Ejector stroke 90 mm Ejector force for / back 25 kN Additional Equipment Granule Dryer Handling System Conveyor Belt - 1400 mm x 400 mm Precision Scale Temperature Units - 2x HB‑Therm This SUMITOMO SHI DEMAG Intelect 2 50/370-110 was manufactured in 2020. It features a fully electric direct-drive system, NC5+ control for enhanced energy efficiency, and precise injection dynamics. Includes a granule dryer, industrial robot, conveyor belt, and temperature units. Ideal for high-quality injection moulding processes. Contact us for more information about this machine. Application Types Injection Moulding Nsdex D Eccspfx Agzolk

Condition: used, fuel type: diesel, Year of construction: 1997, operating hours: 2,642 h, Applicable material: Asphalt Njdpfjx N Evcox Agzjlk Auction item. Asphalt paver is in working condition. The gas asphalt heater has not been tested, the condition of the heater is unknown.

Condition: repair required (used), Year of construction: 1998, functionality: not functional, For sale: Demag 110 9 t machine, year 1998. The machine is not operational and requires refurbishment. Nsdex A Sptjpfx Agzslk

Condition: excellent (used), Control switch Make DEMAG Type DSE 10 C/CS Nlsdpfx Agsf Ezbtszek Documents available

Condition: used, Year of construction: 2008, operating hours: 5,281 h, * Type: Demag DF 65P * Year of manufacture: 2008 Njdpfx Aowc Igwjgzslk * Power: 52 kW -----Internal vehicle number: 10326----Subject to errors and prior sale.

Condition: used, Gear motor, electric motor, three-phase motor -Power: 0.55 kW -Speed: 110 rpm Nlsdpec Uz Huofx Agzok -Shaft: Ø 20 mm -Construction: B5 angle -Protection class: IP 54 -Number: 1x motors available -Price: per piece -Dimensions: 450/270/H175 mm -Weight: 20 kg

Condition: good (used), Column jib crane, overhead crane, workstation crane -Manufacturer: DEMAG, Column jib crane, lifting capacity 250 kg -Base plate: 550 x 550 mm -Protrusion: 2,860 mm Nlodpfelb Iv Tsx Agzek -Total height: 5110 mm -Hook height: 3170 mm -Swivel range: 270° -Chain hoist: can be supplied for an additional charge -Transport dimensions: 5110/800/H550 mm -Weight: 380 kg

Year of construction: 1993, condition: ready for operation (used), Some old injection molding machines from Arburg, Demag and Stübbe are available. 1) Arburg 470C 1300-575, year of manufacture: 1993, clamping force: 1300kN, shot weight: 270g, mold installation height min./max.: 300mm/950mm, opening stroke: 650mm, tie bar spacing: 470mm/470mm, screw diameter: 50mm, core pulls: 3. 2) Stübbe S110/345, year of manufacture: 1976, clamping force: 1000kN, shot weight: 140g, mold installation height min./max.: 180mm/480mm, opening stroke: 320mm, tie bar spacing: 360mm/355mm, screw diameter: 40mm, core pulls: 1. 3) Demag D 150/452 NC III, year of manufacture: 1990, clamping force: 1500kN, shot weight: 207g, mold installation height min./max.: 320mm/550mm, opening stroke: 430mm, tie bar spacing: 460mm/460mm, screw diameter: 45mm, core pulls: 1. 4) Demag D100-275 NC II P, year of manufacture: 1989, clamping force: 1000kN, shot weight: 130g, mold installation height min./max.: 200mm/400mm, opening stroke: 350mm, tie bar spacing: 400mm/400mm, screw diameter: 38mm, core pulls: 1. 5) Arburg Allrounder 270M 250-75, year of manufacture: 1990, clamping force: 250kN, shot weight: 25g, min. mold installation height: 225mm, opening stroke: 325mm, tie bar spacing: 270mm/270mm, screw diameter: 20mm, core pulls: 1. 6) Demag D250-730 NC III, year of manufacture: 1991, clamping force: 2500kN, shot weight: 320g, mold installation height min./max.: 310mm/710mm, opening stroke: 600mm, tie bar spacing: 560mm/560mm, screw diameter: 52mm, core pulls: 1. 7) Arburg 320 850-210, year of manufacture: 1986, clamping force: 850kN, shot weight: 108g, mold installation height min./max.: 250mm/625mm, opening stroke: 375mm, tie bar spacing: 320mm/320mm, screw diameter: 35mm, core pulls: 0. On site inspection is possible. Individual sale possible. Nledpfox Hz Sbox Agzjk

Condition: used, Electric chain hoist, electric lifting device, crane DEMAG type DKUN 1-100 K V1 F4 Serial no.: 61801900 Year of manufacture: 1997 Load capacity: 100 kg Hook travel: 3 meters Main lifting speed: 8 m/min Fine lifting speed: 2 m/min Chain size: 3.6 x 10.6 mm Pendant control cable length: approx. 1.8 meters Njdpju Swb Uofx Agzslk Power supply: 400 volts, 50 Hz 1 load strand = 100 kg Net weight: 16.5 kg Good condition

Condition: excellent (used), functionality: fully functional, DEMAG slip ring motor 36/24 S4 GÜ Fine input FG36 19K or Fine input 72 DFg overhauled or Hoist motor 36/24 K6P 24/14 K4P 24/10 K4P Info: 20,000 DEMAG spare parts and components in stock! demag parts warehouse Nsdpfewafidox Agzelk

Year of construction: 2022, condition: new, functionality: fully functional, lifting height: 10,000 mm, main lifting speed: 6,300 mm/min, i=79, new, 2x available, with top block, with bottom block, without electrics, without DMF KBH 140 B4 + KBA 80 B4 Fine input gearbox F10 Nlodpfeq R N T Ajx Agzok Acid protection coating Various accessories on request

Condition: used, Electric chain hoist, electric lifting device, crane DEMAG model DKUN 1-100 K V1 F4 Serial No. 61801899 Year of manufacture: 1997 Load capacity: 100 kg Hook path: 3 meters Main lifting speed: 8 m/min Njdpohtr Eyefx Agzolk Fine lifting speed: 2 m/min Chain size: 3.6 x 10.6 mm Control pendant cable length: approx. 1.7 meters Mains connection: 400 Volt, 50 Hz 1 chain fall = 100 kg Net weight: 16.5 kg Good condition

Year of construction: 2011, operating hours: 400 h, condition: used, functionality: fully functional, lifting height: 6,000 mm, main lifting speed: 9,000 mm/min, i=61 used, good condition, complete with top block and bottom block, without electrics, DMF, without chassis, for mounting on EZ or as foot hoist Nedpfx Agsrbznnjzolk Engine ZBR132 C4

Condition: used, Transformer, transformer, converter, three-phase autotransformer, three-phase transformer, three-phase transformer, single-phase transformer -Manufacturer: Tramag Fürth, transformer type CST from injection molding machine Demag D 100-275 NC -A-No.: 80258 . 06520365 -Power: 1100 VA -Technical data: see photo nameplate -Dimensions: 240/120/H220 mm -Weight: 16 kg Nsdjn H Eucspfx Agzjlk

Condition: used, Year of construction: 1999, Technical details: screw size: 45 mm Nledpfxjwvkgge Agzek injection shot weight in Polysterol: 149 g/PS closing pressure: 100 kN

Condition: excellent (used), Hoisting unit Manufacturer: DEMAG Nedpfex Ncptex Agzolk Type: P 416 H7/2 3.2 t with trolley Load capacity: 3,200 kg Hook travel: 7 metres 2 lifting speeds: 8 / 0.8 m/min Year built: 1978 Trolley travel speed: 14 m/min

Condition: used, Year of construction: 1983, functionality: fully functional, 1450 rpm 28.7 kW Nodpfox Nh Twex Agzolk

Condition: excellent (used), Year of construction: 2020, Pillar jib crane, indoor crane, workstation crane -Manufacturer: Demag, pillar jib crane load capacity 125 kg -Base plate: 350 x 350 mm -Thrust: 2,000 mm Nsdpfx Aexmi R Asgzjlk -Total height: 1,780 mm -Hook height: 840 mm -Chain hoist: DEMAG type DC-Com 1 125 1/1 H4 V8/2 -Main stroke: 8.0 m/min -Fine stroke: 2.0 m/min -Transport dimensions: 540/2100/H500 mm -Own weight: 176 kg

Condition: used, Year of construction: 1990, Lifting capacity 2,5 t weight of the machine ca. 80 kg +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++ Nljdpfxsd N Suxe Agzek

Condition: good (used), Year of construction: 2001, functionality: fully functional, clamping force: 800 kN, screw diameter: 30 mm, For sale is an injection molding machine of the brand Demag, type 80/420-200 System The machine is in good and functional condition ATTENTION: No backup disks available Technical data: Year of manufacture: 2001 Nljdpfx Aenfu I Isgzjk Clamping force: 800 kN Tie bar distance V: 420 mm Tie bar distance H: 420 mm Plate size H: 590 mm Plate size V: 600 mm Minimum installation height: 250 mm Maximum plate distance: 700 mm Opening stroke: 450 mm Ejector stroke: 150 mm Ejector force: 41 kN Tool weight: 700 kg Screw diameter: 30 mm Dimensions: approx. 4.5*1.50*2 m Weight: 4t Transport and loading can be organized Europe-wide at extra cost on request. Prices plus VAT Inspection possible by appointment. Contact us, our team looks forward to assisting you. Trade-in or exchange possible! Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, visit our website.

Condition: used, Year of construction: 1999, Technical details: screw size: 45 mm Nsdswvkgmopfx Agzjlk injection shot weight in Polysterol: 149 g/PS closing pressure: 1250 kN

Condition: excellent (used), Year of construction: 2012, Sumitomo Demag Systec 350/720-2300 / Production Line with Wittmann-Demag DR833 Robot Year of manufacture: 2012 Injection Unit: Screw diameter: 70 mm Shot weight: 1103 g Injection pressure: 1877 bar Dosage volume: 1212 cm³ Clamping Unit: Clamping force: 350 t Tie bar distance: 720x720 mm Platen size: 1040x1060 mm Ejector: hydraulic Clamping system: toggle lever Control system: NC5 Additional equipment: Euromap 67 Robot interface Nlsdpfex Nhb Uex Agzsk 5x air valves 1x hydraulically operated core pull with proportional valve 5x hot runner controls Hardened injection unit – bimetal Moog proportional valve on the injection unit – high-precision injection Parallel movements Central lubrication 3 variable-capacity hydraulic pumps Integrated printer Machine has been regularly serviced by authorized Sumitomo Demag technicians Robot Wittmann-Demag DR833 Year of manufacture: 2011 4-axis robot: 3 axes driven by servomotors (electric), Y-axis telescopic; C-axis pneumatic, A-axis movement Axis travel: X-900, Y-1600, Z-3000 Touch control panel Robot safety package Robot with adapter, conveyor belt, and protective enclosure Purchase of the robot and conveyor belt at additional cost Dimensions: Weight: 15,750 kg L x W x H: 8.26 x 2.01 x 2.27 m All offered machines are started up by our service technicians prior to sale. It is possible to obtain a video of technical tests for the selected machine, or to participate in live technical tests at our facility in Łódź. Price: On request

Condition: good (used), Hydraulic power unit, hydraulic pump, hydraulic pump -Max. pressure: 100 bar -Liter flow rate: 6 l/min Nljdpfob A Hciex Agzek -Hydraulic tank -Hydraulic valve -Weight: 110 kg

Condition: excellent (used), Year of construction: 2015, Sumitomo Demag Systec 350/720-2300 / Production line with Wittmann-Demag DR853 robot Year of manufacture: 2015 Injection unit: Screw diameter: 70 mm Shot weight: 1103 g Injection pressure: 1,877 bar Nledpfx Agox Nhbbezek Dose volume: 1,212 ccm Clamping unit: Clamping force: 350 t Tie bar spacing: 720x720 mm Platen size: 1,040x1,060 mm Ejector: hydraulic Clamping unit: toggle lever Control: NC5 Additional equipment: Euromap 67 Robot interface Control with air valve Control with hot runner x 5 Injection unit hardened - bimetallic Moog proportional valve on the injection unit – precise injection Parallel movements Central lubrication 3 hydraulic pumps with variable output Built-in printer Machine regularly serviced by authorized Sumitomo Demag service Wittmann-Demag DR853 robot Year of manufacture: 2016 6-axis robot: 5 axes driven by servo motors (electric): X, Y-telescopic, Z, B, C Axis travels: X-1,200, Y-2,400, Z-4,000 Touch control panel Safety package for robots Robot with adapter, conveyor belt and protective enclosure Purchase of robot and conveyor belt at extra cost Dimensions: Weight: 15,750 kg Length/Width/Height: 8.26x2.01x2.27 m All machines offered are started up by our service technicians prior to sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: good (used), Year of construction: 1995, Double girder traveling crane, bridge crane, overhead crane, assembly crane, workstation crane, ceiling-mounted traveling crane, traveling crane, crane system -with 2x electric cable winches -Load capacity: 2 x 1600 kg -Bridge load capacity: 3.2 tons -Wingspan: 6.4 m -Hallway service -Dimensions: 2000/6400/H1000 mm -Weight: approx. 2000 kg Nlsdpfx Agob A Ny Ejzek