Used Demag V 70 for sale (560)

Year of construction: 2003, condition: ready for operation (used), Eight Arburg injection molding machines, one Engel injection molding machine, and one Demag injection molding machine are available. 1) Arburg 270M 350-90, year of manufacture: 1996, operating hours: approx. 110000h. 2) Arburg 270M 350-90 U, year of manufacture: 1998, operating hours: approx. 108000h. 3) Arburg 270M 350-90, year of manufacture: 1992, operating hours: approx. 178000h. 4) Arburg 420C 1000-250, year of manufacture: 1995, operating hours: approx. 96000h. 5) Arburg 370C 800-225, year of manufacture: 1992, operating hours: approx. 156000h. 6) Arburg 320M 500-90, year of manufacture: 1991, operating hours: approx. 94000h. 7) Arburg 270M 350-90 U, year of manufacture: 1998, operating hours: approx. 83000h. 8) Arburg 630S 2500-675, year of manufacture: 2003, operating hours: approx. 93000h. 9) Demag Viva 100-400, year of manufacture: 1999, operating hours: approx. 116000h. 10) Engel ES 500/100 HLS, year of manufacture: 1998, operating hours: approx. 103000h. On-site inspection possible. Sale of individual machines possible. Dedpfx Akexrf Nre Aocp

Condition: excellent (used), Year of construction: 2021, operating hours: 9,000 h, clamping force: 1,000 kN, screw diameter: 30 mm, clearance between the columns: 470 mm, mold height (min.): 180 mm, ejector force: 32,000 N, ejector stroke: 150 mm, overall weight: 5,290 kg, input frequency: 50 Hz, input voltage: 400 V, ONLY APPROX. 9,000 OPERATING HOURS – FULLY ELECTRIC WITH ROBOT AND PERIPHERALS In very good condition according to the seller's assessment, and with only approx. 9,000 operating hours: this Sumitomo (SHI) Demag IntElect2 100/470-250, manufactured in 2021, impresses with its low operating hours. The extensive equipment, including an SDR-5S robot, two HB-Therm temperature controllers, and material handling equipment, makes this machine an attractive overall package. Fully electric Demag IntElect2 with robot and peripherals This used Sumitomo (SHI) Demag IntElect2 100/470-250, manufactured in 2021, combines 1,000 kN clamping force with an injection unit of size 250. The plasticizing unit is equipped with a highly wear-resistant, corrosion-resistant 30 mm screw with an L/D ratio of 20, as well as a bimetallic cylinder. Tooling space and process equipment The tie bar spacing is 470 x 470 mm; the mold height is specified as 180 to 550 mm. Two hydraulic and one pneumatic core pull circuits, integrated hot runner control for 16 zones, and an eight-fold cooling water flow controller are included in the equipment. activeProtect and the process data acquisition system PDE complement the process monitoring. Handling, temperature control, and material handling equipment The documented scope of supply includes the Sumitomo Demag SDR 5S H&P linear robot with a 3 kg payload, two HB-Therm Thermo-5 HB-160Z1 temperature controllers, two integrated conveyor belts, as well as an additional Z-conveyor and a sprue separator. Interfaces include EUROMAP 67, EUROMAP 77 / OPC UA, and EUROMAP 82.1 / OPC UA. Condition: very good, according to the seller's assessment. Operating hours: only approx. 9,000 h. Price and current availability are available upon request. I would be happy to assist you with the technical coordination of this used injection molding machine. Dcsdpj Ahkfkjfx Ak Aep TECHNICAL DATA Clamping force: 1,000 kN / 100 t Injection unit: 250 Screw diameter: 30 mm; L/D 20 Max. injection speed: 200 mm/s Tie bar spacing: 470 x 470 mm Mold height: 180–550 mm Ejector: 150 mm; 32 kN; 333 mm/s Mains voltage: 400 V / 50 Hz Machine weight according to nameplate: 5,290 kg DELIMITATION OF THE SCOPE OF SUPPLY The KOCH KKT 55 material drying system with the associated KOCH conveyor is not included in the quoted price of the Demag. The KOCH system can be purchased separately; price on request.

Condition: used, Year of construction: 2004, clamping force: 110 kN, displacement volume: 2,926 cm³, injection pressure: 1,600 bar, overall weight: 5,650 kg, screw conveyor diameter: 45 mm, terms of delivery: EXW (ex Works) Dedpfx Akozh N Tys Ascp delivery time: on request terms of payment: 100% prior to delivery

Condition: ready for operation (used), Year of construction: 2021, operating hours: 9,500 h, clamping force: 1,000 kN, overall weight: 5,290 kg, This 5-axis SUMITOMO SHI DEMAG IntElect2 100/470-250 was manufactured in 2021. It features a clamping force of 1000 kN and a tie bar distance of 470 mm. The machine includes an injection unit size of 250 and a screw diameter of 30 mm. If you are looking to get high-quality injection moulding capabilities, consider the SUMITOMO SHI DEMAG IntElect2 100/470-250 electrical injection moulding machine we have for sale. Contact us for further details. Dcedpfx Akjzp Ew De Aop - Tie Bar Distance: 470 mm- Mould Height Min.: 180 mm- Mould Height Max.: 550 mm- Centering Diameter (Fixed Platen): 125 mm- Centering Diameter (Moving Platen): 125 mm- Ejector Stroke: 150 mm- Ejector Force: 32 kN- Ejector Speed: 333 mm/s- Injection Unit Size: 250- Screw Diameter: 30 mm- L/D Ratio: 20- Injection Speed: 350 mm/s- Control Unit: SDIAS- Mains Connection / Voltage: 400 V / 50 Hz- Current / Amperage: 70 A- Short Circuit Capacity (Icw): 2.0 kA- Max. Hydraulic Pressure (Pmax): 210 bar- Total Weight: 5290 kg- Robot System Model: SDR 5S H&P- Robot Load Capacity: 3 kg- Robot X-Stroke (Transverse Stroke): 1000 mm (Non-operator side)- Robot Y-Stroke (Demoulding Stroke): 400 mm- Robot Z-Stroke (Vertical Stroke): 1000 mm- Additional / Peripheral Equipment:- Material Hopper Loader / Conveyor: KOCH TECHNIK- Temperature Control Unit: HB-THERM Thermo-5

Condition: used, Year of construction: 2004, clamping force: 110 kN, displacement volume: 2,926 cm³, injection pressure: 1,600 bar, overall weight: 5,650 kg, screw conveyor diameter: 45 mm, terms of delivery: EXW (ex Works) delivery time: on request Dcodpfxoymqz Rj Ak Asp terms of payment: 100% prior to delivery

Condition: excellent (used), Year of construction: 2012, Wittmann TP+D-S-2, 140,SO-C, S,X- TVEBBH2M_04_00 (2012) 1\. Overview & Model Decoding 1. Manufacturer: Wittmann (Austria) 2. Year of Manufacture: 2012 3. Model Series: Tempro Plus D (TP+D) – high-end temperature controller equipped with a touchscreen interface 4. S-2: S (Single) = single-circuit configuration / 2 = dual connection configuration or generation 2 module 5. 140: Pressurized water medium with a maximum operating temperature of up to 140 °C 6. SO-C: Solenoid valve / Option C cooling configuration 7. S: Standard pump and heating size configuration 8. TVEBBH2M_04_00: Internal PCB assembly or firmware system part code from the rating plate 2\. Main Technical Specifications (Tempro Plus D 140 Series) 1. Heat Transfer Medium: Pressurized water (up to 140 °C) 2. Heating Capacity: Typically 9 kW or 12 kW (depending on the exact internal configuration) 3. Cooling Capacity: Approx. 40 kW – 60 kW at 130 °C 4. Pump Performance: Dcedpfx Akj Ah E Adj Aop 5. Max. Flow Rate: Approx. 40 – 60 l/min 6. Max. Pump Pressure: Approx. 4.5 – 6.0 bar 7. Power Supply: , 8. Control System: Microprocessor Touchscreen Display (Tempro Plus D visualization unit) 9. Communication: Injection molding machine interface (Serial/CAN-bus/Ethernet/Wittmann B2/C2 protocol)

Condition: ready for operation (used), Year of construction: 2014, operating hours: 60,000 h, functionality: fully functional, machine/vehicle number: 7230-0232, clamping force: 500 kN, screw diameter: 25 mm, • Sumitomo SHI Demag IntElect 50/370-110 • Year of manufacture: 2014 • Machine no.: 7230-0232 • Clamping force: 500 kN / 50 t • Tie bar spacing: 370 mm • Injection unit: 110 • Screw diameter: 25 mm • Control system: NC5 / CDIAS • including removal device Geiger MiniServo 1.5 • Approximately 12 million cycles In addition, we are selling a Sumitomo SHI Demag IntElect 50/370-110, year of manufacture 2013. Dcedpfx Ake Aggumo Asp Both machines have extensive features, including electric ejectors and screw drives, active tool protection functions, process data recording, and interfaces for handling and peripheral devices. The machines were in operation until they were dismantled. If you are interested, we would be happy to provide you with further information and images. Our asking price for the complete package, including both machines and both Geiger removal devices, is €55,000 net, ex works.

Condition: ready for operation (used), Year of construction: 2013, operating hours: 61,679 h, functionality: fully functional, machine/vehicle number: 7230-0182, clamping force: 500 kN, screw diameter: 22 mm, • Sumitomo SHI Demag IntElect 50/370-110 • Year of manufacture: 2013 • Machine no.: 7230-0182 • Clamping force: 500 kN / 50 t • Tie bar spacing: 370 mm • Injection unit: 110 • Screw diameter: 22 mm • Control system: NC5 / CDIAS • PLC operating hours: approx. 61,679 h • Drive operating hours: approx. 56,166 h • Heater operating hours: approx. 57,914 h • Total cycles: approx. 11.9 million Djdpfo Aggpajx Ak Ajcp • incl. Geiger MiniServo 1.5 parts removal device In addition, we are selling a Sumitomo SHI Demag IntElect 50/370-110, year of manufacture 2014. Both machines feature extensive equipment, including electric ejectors and screw drives, active tool protection functions, process data acquisition, and interfaces for handling and peripheral devices. The machines were in operation until they were dismantled. If you are interested, we will gladly provide you with further information and images. Our asking price for the complete package consisting of both machines, including both Geiger parts removal devices, is €55,000 net, ex warehouse.

Condition: ready for operation (used), Year of construction: 2013, operating hours: 23,000 h, clamping force: 1,200 kN, screw diameter: 40 mm, Hydraulic injection moulding machine manufactured in 2013. This SUMITOMO SHI DEMAG Systec 120/470-430 features a clamping force of 120 t and a screw diameter of 40 mm. It offers a maximum metering volume of 231 cm³ and a distance between tie bars of 470 x 470 mm. If you are looking to get high-quality injection moulding capabilities, consider the SUMITOMO SHI DEMAG Systec 120/470-430 machine we have for sale. Contact us for further details. - Max. Specific Injection Pressure: 2025 bar- Max. Metering/Dosing Volume: 231 cm³- Mold Height Min./Max.: 250 / 850 mm- Distance Between Tie Bars: 470 x 470 mm- Centering Ring Diameter (Ejector/Nozzle): 125 mm- Core Pull: 1 circuit via switching valve on movable mold platen (Q-independent)- Operating Hours: Drives 23,000 hrs- Pump Drive Power: 22.0 kW- Power Supply: 400 V +-10% / 50 Hz, 3 Ph + N + PE- Oil Cooler Max Water Temp: 25°C Dcedpoz Eq Svsfx Ak Ajp

Condition: used, Demag Ergocontrol, 4 MB- for NC4 control system - removed from Demag ET 6 system - removed from running machine Dodsrr Ehmspfx Ak Aocp - fully functionalmanufacturer: Demag spare part no.: 7If the spare part is traded in exchange, a partial credit note will be issued after receipt of the defective part and inspection by the manufacturer. We reserve the right to refuse a credit note due to the condition or age of the returned part. The defective part must be in a repairable condition, the credit note will be issued after feedback from the manufacturer. Dition: gebraucht

Condition: used, functionality: limited functionality, gearing type: hydrostat, fuel type: diesel, color: yellow, overall weight: 20,000 kg, number of seats: 1, first registration: 01/1992, Year of construction: 1992, machine/vehicle number: 20412, Equipment: additional headlights, cabin, parking heater, We offer this used Mannesmann Demag V 73 mobile crane, year of manufacture 1992. Type: V 73 Chassis number: 20 412 Year of first commissioning: 1992 Permissible total weight: 20,000 kg Permissible front axle load: 10,000 kg Maximum lifting capacity: 14 t Maximum outreach: 13 m Last inspection: 2023 Dcedpfx Asyi D Ddok Ajp The load moment limiter is not operational. If you have any questions or require further information, please feel free to send us a message.

Condition: used, CNC CONTROL Controller: C-Dias CLAMPING UNIT Clamping force kN: 4.200 Tie-bar clearance (H x V) mm: 820 INJECTION UNIT Injection unit size (Euromap): 2300 Screw diameter mm: 70 Max. shot weight (PS) g: 1.100 MOULD FUNCTIONS & HANDLING Hydraulic core pull circuits: 4 Cascade / valve gate circuits: 4 Hot runner control zones: 40 Handling robot (model / year): Wittmann DR 832 (2015) Robot strokes X / Y / Z mm: 900 / 1.600 / 2.500 Robot rotary axes (B / C): C servo 180° / B servo 270° DRIVE Max. hydraulic pressure bar: 190 Dsdpfx Aksz Alpte Aocp Mains connection V / Hz / A: 3 x 400 / 50 / 187 + 114

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, machine/vehicle number: BN2222, Demag chain hoist crane lifting mechanism 3200 kg DC-Pro 16-3200 H8 V4/1 Load capacity 3200 kg / 3.2 t, lifting capacity – 2-strand with trolley drive (beam width approx. 25-33 cm) with 2 lifting speeds, lifting height approx. 8 m!!! incl. control valve block Total weight approx. 160 kg, connection to 400 V 50 Hz Very good condition, hardly used Item location is 75053 Gondelsheim Dcedpszhtfmsfx Ak Asp See pictures

Year of construction: 1972, condition: ready for operation (used), Includes (1) DEMAG TC 140 crane, year of manufacture: 1972, load capacity: 50t at 3m radius, slewing angle: 360°, outreach: 5500mm, drive: pneumatic, hydraulic, electric, operating hours: 7153h. (2) Faun LK 910/483-V vehicle, operating hours: 1214h. On-site inspection is possible. Dsdpfx Akeuzx T Rj Aocp

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2021, overall weight: 11,800 kg, total length: 16,700 mm, load capacity: 10,000 kg, working height: 11,350 mm, lifting height: 11,350 mm, Equipment: documentation/manual, Demag overhead crane – Type: double-girder – Capacity: 2 x 5,000 kg – Lifting height: 11.35 m – Year of manufacture: 2021 – Hoist type: wire rope hoists – FEM/ISO hoists: 2m / M5 – Manufacturer: Demag / Siempelkamp Dimensions – Span: 16,700 mm (center-to-center) – Total length: 17,000 mm – Installation height: 1,600 mm – Width: 3,860 mm – Wheelbase: 3,150 mm – Suitable for crane rail: A55 / 50 x 30 mm Dcedjyvr Huepfx Ak Aop – Net weight: 11,800 kg Speeds – Hoisting: 8/1.3 m/min – Trolley travel: 20/5 m/min – Crane travel: 40/10 m/min Features – Control: radio control – Crane manual available: yes – Electrical diagrams available: yes – Condition: in very good condition – Disassembled: yes, available immediately – Excluding rotating carousel

Condition: used, Year of construction: 2006, Demag Modular 250/560-1450 Euromap size: 2500-1450 CLAMPING UNIT Clamping force: 2500 kN Locking force: 2750 kN Max. opening stroke: 575 mm Min. mould height: 310 mm Dedpoz D Tnqofx Ak Ajcp Max. mould height: 660 mm (760 mm with WA) Max. distance between platens: 1235 mm (1335 mm with WA) Platen size (H x V): 830 x 830 mm Distance between tie bars (H x V): 560 x 560 mm Max. mould weight: 2500 kg Max. mould weight on moving platen: 1700 kg HYDRAULIC EJECTOR Ejector stroke: 180 mm Ejector force: 69 kN Ejector retraction force: 31 kN INJECTION UNIT (1450) Screw diameter: 70 mm L/D ratio: 20 Injection pressure: 1400 bar Stroke volume: 1039 cm³ Shot weight (PS): 940 g Max. dosing stroke: 270 mm Max. nozzle stroke: 400 mm Nozzle penetration depth: 20 mm Nozzle contact force: 110 kN Barrel heating power: 27.0 kW Electric screw drive (WA): 30 kW Hopper capacity: 110 l GENERAL Oil tank capacity: 500 l Pump motor: 30 / 37 kW Total installed power: 57 kW (64 kW with electric screw drive) Dry cycle time (EUROMAP 6): 2.35 s – 392 mm / 2.25 s – 392 mm Net weight (without oil): 11200 kg Dimensions (L x W x H): 5.7 x 1.7 x 2.2 m (length without injection unit overhang) Noise level: 74 dB(A)

Condition: not inspected (used), functionality: unexamined, Year of construction: 2007, total length: 18,000 mm, total width: 6,000 mm, load capacity: 500 kg, main lifting speed: 8 mm/min, working height: 4 mm, For sale is a used DEMAG KBK lightweight crane system, including an electric chain hoist, electric traveling unit, control panel, and extensive original accessories. The system was professionally disassembled and stored in a dry environment. It is ideally suited for workshops, assembly areas, production facilities, maintenance, or logistics. Technical data Manufacturer: DEMAG System: KBK lightweight crane system Load capacity: 500 kg Crane span: approx. 18.9 m Span: approx. 6 m Lifting height: 4 m Lifting speed: 8 / 2 m/min Electric chain hoist with electric traveling unit Dsdpfozwt Tcsx Ak Ajcp Voltage: 400 V Protection class: IP55 Year of manufacture of chain hoist: approx. 2007 Scope of delivery DEMAG electric chain hoist 500 kg Electric traveling unit Pendant control DEMAG KBK crane rail approx. 18 m x 6 m Trolley Rail connectors Suspensions Connecting elements Original mounting material Additional accessories as shown in the photos Condition Used Disassembled and stored Visually in good overall condition Sold as is Advantages ✅ Original DEMAG quality ✅ Extensive accessory package included ✅ Compact lightweight crane system ✅ Quick assembly possible ✅ Ideal for production and assembly areas Inspection Inspection is possible by appointment in Waiblingen. Please note that the sale of the lightweight crane system is only possible under the following conditions: • Sale exclusively to end users/manufacturing companies (no resale to dealers) – corresponding company profile required • Sale only within Germany Sales / Transfer conditions: • Disassembly, removal and transport are the responsibility of the buyer and at his own risk. • The buyer is responsible for providing personnel, tools and transport equipment. The personnel may only work with appropriate personal protective equipment, and only trained personnel may be used.

Condition: used, Year of construction: 1999, This Demag injection molding machine, type: ergotech pro 50-270, will be auctioned off online in our industrial auction / machinery auction focusing on warehouse clearance of industrial machines – injection molding machines, CNC machining centers, universal lathes, and more. You can find this and many other items on our platform. Dcjdpfj Agk Drsx Ak Aop

Condition: excellent (used), Year of construction: 2008, Min. tool mounting height: 200 mm Max. tool mounting height: 350 mm Max. opening stroke: 380 mm Screw diameter: 22 mm Clamping force: 800 kN Tie bar spacing: 470 x 420 mm Dcodpfx Akozkfd Ts Aop Delivery does not include attachments/accessories. The machine is in very good condition and is powered on.

Condition: good (used), Year of construction: 2001, Demag Ergotech 250/560-840 Euromap size: 2500-840 CLAMPING UNIT Clamping force: 2500 kN Locking force: 2750 kN Max. opening stroke: 575 mm Min. mould height: 310 mm Max. mould height: 660 mm (760 mm with WA) Max. distance between platens: 1235 mm (1335 mm with WA) Platen size (H x V): 830 x 830 mm Distance between tie bars (H x V): 560 x 560 mm Max. mould weight: 2500 kg Max. mould weight on moving platen: 1700 kg Dcjdpjz D Ttgsfx Ak Aop HYDRAULIC EJECTOR Ejector stroke: 180 mm Ejector force: 69 kN Ejector retraction force: 31 kN INJECTION UNIT (840) Screw diameter: 45 mm L/D ratio: 20 Injection pressure: 2402 bar Stroke volume: 358 cm³ Shot weight (PS): 320 g Max. dosing stroke: 225 mm Max. nozzle stroke: 400 mm Nozzle penetration depth: 20 mm Nozzle contact force: 80 kN Barrel heating power: 13.0 kW Electric screw drive (WA): 20.5 kW Hopper capacity: 70 l GENERAL Oil tank capacity: 500 l Pump motor: 30 / 37 kW Total installed power: 43 kW (50 kW with electric screw drive) Dry cycle time (EUROMAP 6): System: 2.35 s – 392 mm / 2.25 s – 392 mm; Concept: 2.25 s – 392 mm / 2.25 s – 392 mm Net weight (without oil): 10700 kg Dimensions (L x W x H): 5.7 x 1.7 x 2.1 m (length without injection unit overhang) Noise level: 74 dB(A)

Condition: new, functionality: fully functional, Basic Drive Specifications (ACS800-DEMAG 04M-0170-3) Product Series: ACS800 (ABB Industrial Low-Voltage Drive) Application Software: DEMAG (Loaded with Demag's proprietary crane control program rather than standard ABB firmware). Construction Type: 04M (Drive module designed for cabinet installation with specialized mechanical configurations). Rating/Size: 0170 (Nominal current rating indicator; fits an R7 frame size).Normal Output Power: 132 kW Continuous Max Current: 248 A Heavy-Duty Power (Cranes): 110 kW (with 202 A continuous output) Voltage Rating: 3 (Three-phase input supply voltage of 380 V to 415 V AC). Hardware & Software Option Codes (+D150+E210+H355+H362+J400+L501+L502) Dcedpfsy Udtkjx Ak Ajp The plus-codes define the factory-installed modifications and optional expansion modules: Code Component / Feature Description +D150 Brake Chopper Built-in dynamic braking control module. Essential for hoisting to safely dissipate energy generated during load lowering. +E210 EMC Filter Low electromagnetic emission filter conforming to standard European industrial standards (Category C3/Class A). +H355 Control Cabling Entry Specifies a specific bottom or standard orientation configuration for thick power/motor cables. +H362 Coated Circuit Boards Provides an extra layer of protective chemical coating on internal PCBs to prevent corrosion from dust, humidity, or aggressive industrial environments. +J400 Control Panel (CDP312R) Removable digital control panel with alphanumeric display mounted on the unit or cabinet door for programming and metrics tracking. +L501RDIO-01 Digital I/O First digital I/O extension module, giving extra programmable inputs/outputs for crane safety limits or interlocking. +L502RAIO-01 Analog I/O Analog I/O extension module, allowing precise master/joystick references or load cell signal reading. Brand new never used. Please check out our other listings as well.

Condition: used, Year of construction: 2004, operating hours: 94,000 h, clamping force: 150 kN, displacement volume: 124 cm³, injection pressure: 2,420 bar, overall weight: 7,900 kg, screw conveyor diameter: 30 mm, terms of delivery: FCA Pegnitz delivery time: on request Dcjdo Ahrw Uopfx Ak Aep terms of payment: 100% prior to delivery

Condition: like new (used), functionality: fully functional, machine/vehicle number: 94447285, Year of construction: 2023, lifting height: 4,000 mm, chain length: 4,000 mm, load capacity: 500 kg, lifting speed: 75 mm/s, fine lifting speed: 18 mm/s, power: 0.49 kW (0.67 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: AC, For sale is a like-new, immediately ready-for-use Demag electric chain hoist, including a matching aluminum track (3.8 m), trolley, and a professional Demag wireless remote control. The system was manufactured in June 2023 and is in excellent, well-maintained condition. Technical data (chain hoist): Model: Demag DC-COM 5-500 (1/1 H4 V4.5/1.1) Year of manufacture: 06/2023 Load capacity (SWL): 500 kg (0.5 t) Hook travel / chain length: 4.0 m (4000 mm) Lifting speeds: 4.5 m/min (main speed) / 1.1 m/min (fine lifting speed) Motor power: 0.49 kW / 0.10 kW Dcedozxg T Espfx Ak Asp Operating voltage: 3 ~ 380–415 V / 50 Hz Protection class: IP 55 Features & scope of delivery: Demag electric chain hoist with chain and load hook Aluminum track (length: 3.8 m) including trolley Demag wireless remote control (handheld transmitter) for precise and wireless operation Including the corresponding charging unit/power supply and connection cable Ideally suited for workshops, warehouses, or assembly workstations where precise and safe lifting is required. Inspection is possible by arrangement.

Condition: good (used), Hoisting motor with chain hoist and control panel. Load capacity: 1/1 125 kg 8 m/min. 2/1 250 kg 4 m/min. Depth: 300 mm Height: 400 mm Dcodpjzcm R Tjfx Ak Aep Width: 500 mm Weight: approx. 22 kg (net) Condition: good, second-hand

Condition: used, Year of construction: 2019, Sumitomo (SHI) Demag EL-EXIS SP 1000/1195-6300 Injection Moulding Machine General Information Manufacturer: Sumitomo (SHI) Demag Model: EL-EXIS SP 1000/1195-6300 Dedpfx Ake Afbz Us Ajcp Year of Manufacture: 2019 Country of Origin: Germany CE Marked: Yes Availability: Immediately available Location: Belgium ----- Technical Specifications Clamping Force: 10,000 kN (1,000 tonnes) Screw Diameter: 119.5 mm Injection Unit: 6300 International Size: 10000 / 6300 Control System: NC5 Plus / C-Dias Machine Weight: 67,600 kg Maximum Operating Pressure: 210 bar Power Supply: 3 × 400 V / 50 Hz Connected Load: 204 kVA Rated Current: 552 A ----- Operating Hours PLC / SPS Hours: 37,916.5 hours Drive Hours: 25,326.0 hours Heating Hours: 29,982.7 hours ----- Description Well-maintained Sumitomo (SHI) Demag EL-EXIS SP 1000/1195-6300 all-electric high-performance injection moulding machine built in 2019. The EL-EXIS series is specifically designed for applications requiring exceptional productivity, fast cycle times, high precision and reduced energy consumption. It is particularly suitable for packaging applications, thin-wall products and technical mouldings. The machine is equipped with the advanced NC5 Plus / C-Dias control system and remains in very good operating condition. Inspection under power can be arranged by appointment. Please Note: The information was obtained to the best of our abilities and - where possible - from the manufacturers. It is given in good faith, however, its accuracy cannot be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. Specific tooling must be requested before purchasing because in most cases the offered machines are still in production when the pictures were taken. We advise you to check any vital details! Manufacturer: Sumitomo (SHI) Demag Model: EL-EXIS SP 1000/1195-6300 Year of Manufacture: 2019 Availability: Immediately available Location: Belgium Clamping Force: 10,000 kN (1,000 tonnes) Screw Diameter: 119.5 mm Injection Unit: 6300 International Size: 10000 / 6300 Machine Weight: 67,600 kg PLC / SPS Hours: 37,916.5 hours Drive Hours: 25,326.0 hours Maximum Operating Pressure: 210 bar