Used Peddinghaus Peddy for sale (143)

Condition: good (used), functionality: fully functional, Year of construction: 1978, Equipment: foot remote control, Performance data: Sectional steel shears: L-steel 90° cut 80 x 8 mm L-steel 45° cut 50 x 6 mm Section steel cutter: L-steel 90° cut 60 x 6 mm T-steel 90° cut 60 x 7 mm L + T steel 45° cut 50 x 6 mm Special knives: U-steel 80 mm I-steel 100 mm Flat steel 80 x 12/ 120 x 8 mm Round steel cutter: Round steel 28 mm Square steel 25 x 25 mm Flat steel shear 100 x 11/10 mm triangular notcher 8 mm strokes: 36 1/min drive: 2,2 kW weight: approx. 450Kg Incl. base frame as shown All data without guarantee. Subject to prior sale. Gedpshx Ekpsfx Ag Teil The object of purchase is sold under exclusion of any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of obligations of the seller and for any injury to life, limb and health.

Condition: used, machine/vehicle number: PA 1107, flat steel capacity: 80 x 10 mm electrical connection: 380 V, 1,3 kW space needed: 1000 x 650 x 1480 mm Godpfx Asby Dq Rsg Teil weight: 400 kg

Condition: used, Year of construction: 1979, round bar steel 28 mm square edge steel 25 mm L-beam 80 x 8 mm cutting capacity 35 t shear : steel sheet max. 10 mm shear: flat material 100 x 11 mm blade length 175 mm triangle notching device for sheet until 8 mm no. of strokes max. 35 Hub/min work stroke ca. 35 mm total power requirement 1,5 kW weight of the machine ca. 535 kg dimensions of the machine ca. 0,97 x 0,45 x 1,55 m Motorized 4-way profile steel shear on a rotating base and mobile. The machine can also be used for hole punching by purchasing a hole punching device (instead of a notcher). Photo 5 shows which tools the punching device can optionally be equipped with. All performance specifications refer to a material Godpfx Ajvw Dvleg Toil strength of 450N/mm². Machine dealer with own stock of 1600 m².

Condition: used, round bar steel 25 mm square edge steel 22 mm Gjdjhwaufepfx Ag Tsil L-beam 70 x 7 mm cutting capacity 100 x 10 mm plate thickness 10 mm total power requirement 1,3 kW weight of the machine ca. 0,6 t dimensions of the machine ca. 1,1 x 0,65 x 1,5 m

Condition: used, Year of construction: 1976, round bar steel 28 mm Giodpfx Aswm Rmnjg Tel square edge steel 25 mm L-beam 80 x 8 mm notching cap. mild steel max. 7 mm cutting capacity of the vertical shear 350 kN Punch power 190 kN shear: flat material 100 x 11 mm shear: length of knifes ca. 175 mm total power requirement 1,5 kW weight of the machine ca. 0,5 t dimensions of machine L x W x H 1,0 x 0,5 x 1,5 m

Condition: ready for operation (used), functionality: fully functional, Peddinghaus Peddycut 275 6-way combined section steel shear Available immediately from site: Peddinghaus section steel shear Type Peddycut 275 Year of manufacture 1987 Pressure capacity 27 tons Table 400 x 250 mm Thrust 90 mm Power 10 mm Drive 1.5 kW Strokes/min 15 Flat steel 50 x 15 mm Angle steel 65 x 6 mm Round steel 28 mm Square bar 25 mm Knife pitch 175 mm Punch stroke 24 mm Giodpfxswfdbpe Ag Tol Punches 20 mm in 19 mm or 30 mm in 6.5 mm sheet Foot switch Various punches Transport: from site

Condition: good (used), Year of construction: 1992, Reinforcing steel shear, reinforcing steel cutting machine, profile shear, punch, punching machine -Reinforced steel shear: hydraulic -Number of rods: Ø 12mm/8 pieces, Ø 16mm/4 pieces, Ø 35mm/1 piece -Foot switch: 1 -Dimensions: 1230/680/H640 mm Gedpfx Agsx Srlpj Tjil -Weight: 419 kg

Condition: good (used), functionality: fully functional, Year of construction: 1987, Shearing force 60 t Punching force 40 t Section steel shear L- and T-iron at 90°: 100 x 10 mm at 45°: 65 x 8 mm Notching unit Giodpfex Symnsx Ag Tjl with square notcher for sheets up to 10 mm Flat bar shear for flat steel 380 x 8 mm or 150 x 14 mm Weight: approx. 1.5 t Dimensions: approx. 1.7 x 1.05 x 1.98 m Accessories - electric back gauge 3000 mm - stop table - adjustable hold-down - tool package Validity of safety inspection until Feb. 2026

Condition: used, Technical details: bending angle max.: 0 - 225 ° operating voltage: 380 V revolutions per minute: 5 -16 U/min Gedpfx Agex Adbno Tsil Reinforcing Steel Bending Machine Perfekt 55 KA, PA, PLA — high-performance production machine. Thanks to the control system with four different bending speeds, the machine operates with exceptional efficiency. The bending angle is continuously adjustable from 0 to 225 degrees for left or right rotation. With its correction potentiometer for material spring-back compensation, the machine is ideal for medium and large-scale series production. Using the PA program control unit, up to eight different bending angles can be continuously pre-programmed from 0 to 225 degrees via rotary knobs. without accessories! *

Condition: ready for operation (used), Year of construction: 1977, Immediately available ex location: Universal profile steel shear with punch station Peddinghaus Type 210 / 16 Year of manufacture: 1977 Press force: 60 t Punch: 27 x 19 mm Round steel: 50 mm Square: 45 x 45 mm Flat steel: 150 x 19 mm Punching: 27 x 19 mm L profile 90°: 130 x 13 mm L profile 45°: 100 x 11 mm T profile 90°: 130 x 15 mm T profile 45°: 100 x 11 mm Drive: 5.5 kW Weight: 3 t Many punching tools included Priced at €1,750 plus VAT ex location Giodpfx Agox Tq Eqe Tol

Condition: used, Profile shear for steel with notching unit Ideal for construction sites as it is mobile; of course also suitable for indoor use Peddinghaus 13 RP / 10 Angle profile: 60x7mm T-profile: 60x7mm Solid square: 20x20mm Round: 22mm Flat: 90x14mm Lever shear: Tmax: 10mm Pickup location: 28755 Bremen Gjdpfx Agew Ip D Hj Toil _____ Our general terms and conditions apply; the seller is not liable for typographical or data transmission errors. The appearance of the offered items corresponds to their age and the images shown. Technology and wear of the offered items are age-appropriate. Used machines are sold exclusively to tradespeople and without warranty.

Condition: used, Punch Tonnage Capacity: 75 to 80 tons Shear Tonnage Capacity: Up to 250 tons, Maximum Angle Size: 6 inches x 6 inches x 1/2 inch (or 152 mm x 152 mm x 16 mm) Minimum Angle Size: 1.5 inches x 1.5 inches x 1/8 inch (or 38 mm x 38 mm x 3 mm) Gedpjx Ruvujfx Ag Toil Max Flat Bar (Shear & Punch): 6 inches x 1/2 inch (or 152 mm x 16 mm) Max Hole Size: 1-1/4 inches (32 mm)

Condition: good (used), Punch, punching machine, hole punch, eccentric punch -Manufacturer: Peddinghaus, hole punch -Type: 225B/45 -Pressure force: 45 tons. Giodpfx Agjk D Nt Do Tjl -Punching capacity: see photo of nameplate -Projection: 360 mm Accessories: incl. punching tool and 2nd table (see photos) -Dimensions: 1540/700/H1510 mm -Weight: 1410 kg

Condition: good (used), Year of construction: 2005, machine/vehicle number: 4222559205002, Offer 25437 Technical Data: - Pressing force: 500 kN - Stroke infinitely adjustable: 10 - 32 mm - Strokes per minute: 22 - 27 1/min - Throat depth: 510 mm - Installation height: 350 mm Giedpfx Agox S Ehwj Tsl - Drive: 400 V / 4 kW - Punching, for example: up to 27 mm Ø in steel: 14 mm - With special punching saddle, e.g.: up to 39 mm Ø in steel: 9.5 mm - e.g. up to 90 mm Ø in steel: 4 mm - Dimensions (approx.): W 700 x H 1700 x D 1200 mm - Weight (approx.): 1150 kg - Equipped with: - Hydraulic low-pressure centre punch locator - Extended punch holder for punching in section steel - Roller conveyor with gripper feed, control PEHU 101 - Roller conveyor approx. 6000 mm - Foot switch - Emergency stop button

Condition: used, Year of construction: 2004, Technical details: throat: 510 mm working pressure: 250 bar Punching capacity: 1000 kN t round bar steel: bis Ø 65 x 12 und bis Ø 90 x 8,5 mm electr. connected load: 400V / 50Hz total power requirement: 7,5 kW weight of the machine ca.: ges. 2,6 t dimension machine xH: 1,9 x 1,0 x 2,1 m dimensions L x W x H: Wkz.-Schrank: 0,7 x 0,35 x 0,9 m hydraulic section steel shear Heavy-duty, robust electro-hydraulic hole punch with large throat depth Gjdpfx Agju Ick Ts Tsil -Punching device: punch holder with punch quick-change device up to Ø 31 mm, stripper size L: 360 x W: 300 mm -Punching table: LxW: 360 x 300 mm, punching support 360 x 300 mm with adjustment device and die holder Ø 50 x 25 mm (equipped with die Ø 16 mm) Number of strokes: -with 10 mm stroke = up to 45 strokes/min. -with 30 mm stroke = up to 22 strokes/min. -with 50 mm stroke = up to 14 strokes/min. Punching stroke: min. 10 mm and max. 50 mm Stroke length and stroke position adjustable Equipped with punch Ø 16 mm Foot switch The punching capacities refer to a material strength of 400 N/mm². Accessories: Various punching tools Punches and dies i.D. *

Condition: ready for operation (used), Year of construction: 1992, Hydraulic Section Steel Shear Peddinghaus Hydraulic machine with 5 stations for punching, notching, shearing flat steel, angle steel, and solid material; punch actuation by hand lever; section steel shear operated by foot switch. Gsdpfx Aox Tq Ekog Toil Punch depth: 510 mm Pressing force: 60 t Throat depth: 510 mm Shearing capacity: 500 x 12 or 400 x 16 mm Punch diameter: 27 mm in 17 mm Punch diameter: 39 mm in 12 mm Round steel: 45 mm Square steel: 40 mm Angle steel: 120 x 13 mm Flat steel: 500 x 12 mm Drive: 7.5 kW Oil capacity: 80 liters Weight: 3 t Price: EUR 3,750 plus VAT, ex works

Condition: good (used), functionality: fully functional, Year of construction: 2007, Used punching and shearing machine from Peddinghaus Model: Peddimaster 110/170 Punching capacity: 110 tons Shearing capacity: 170 tons Giodpfx Asx Iicweg Tol Includes side stop and various tools

Condition: good (used), functionality: fully functional, Year of construction: 2004, General Specifications Maximum Plate Thickness: Up to 32 mm. Maximum Plate Width: 1828.8 mm (72 inches). Minimum Plate Width: 152 mm (6 inches). Punching Capabilities Punch Capacity (Tonnage): 160 to 177 metric tons. Maximum Punch Hole Size: Up to 45 mm (1.75 inches) in diameter. Maximum Material Thickness for Punching: 32 mm (1.25 inches). Gedpfjx Ruvnox Ag Tsil Additional Features Hypertherm HT2000

Condition: good (used), bench vice, metalworker's vice, parallel vice Giedpfxjddfh Ej Ag Tol -Jaw width: 150 mm -Wingspan: 200 mm -Number: 2x vices available -Price: per piece -Dimensions: 490/340/H195 mm -Weight: 27 kg

Condition: good (used), functionality: fully functional, Year of construction: 2010, PEDDINGHAUS FDB1500/ 3C. YEAR OF MANUFACTURE 2010. 1500mm CAPACITY X 6000mm. PLASMA / OXY FUEL / DRILLING. HYPERTHERM HPR 260 SOURCE. Peddinghaus FDB 1500 plate processing machine for drilling and flame cutting. CNC control Siemens Sinumerik 810 Machining dimensions: machining width from 80 to 1500 mm, sheet thickness from 6 - 50 mm, material length as a base up to 6000 mm, (the length is very easy to extend because of the roller measuring system). Drill diameter: min. ø 8, up to max. ø 40 mm suitable for HSS coolant channel drill (cooling by the drill spindle), Godpfx Aox Ruu Deg Teil

Condition: good (used), Vise, bench vise, locksmith vise, parallel vise, heavy-duty vise Gjdpfxskvrpwe Ag Teil -Parallel vise: jaw width 150 x 30 mm -Wingspan: 190 mm -Quantity: 1 available -Dimensions: 485/210/H190 mm -Weight: 26 kg

Condition: good (used), functionality: fully functional, Year of construction: 2008, Peddinghaus BDL 1250/9D Meba 1270 DGP CNC Drilling / Sawing Line - Year 2008. 9 spindles. Etching of beam. Gsdjx Ruuwopfx Ag Tjil Carbide Drilling Hard stamping unit. Measuring Head. In-Feed Cross Transfers. Out-Feed Cross Transfers. 1250mm Capacity.

Condition: good (used), Separating tool, punching tool, punch, punch die, punch stamp, gill forming tool -Manufacturer: Peddinghaus, die-cutting tool for holding dies -Type: SM078 5905 -Mounting: Hole spacing 170 mm / M16 -Dimensions: see photos -Dimensions: 200/65/H130 mm Gijdpfx Agsx Nnnbo Tel -Weight: 8.4 kg

Condition: good (used), Separating tool, punching tool, punch, punch die, punch stamp, gill forming tool -Manufacturer: Peddinghaus, die-cutting tool for holding dies Gsdpfx Aex Nng Deg Tjil -Type: unfortunately without a type designation -Dimensions: see photos -Dimensions: 350/340/H245 mm -Weight: 58.5 kg

Condition: good (used), Punch holder, die holder, notching tool, punching tool, punch, punch die, punching die, for eccentric press, hydraulic press Giedpfxox Idm Rj Ag Tjl -Stamp holder: with slotted punch tool, without die -Socket: Ø 51 mm / Bolt circle Ø 110x18 mm see photos -Punch tool: Slotted hole 22.5x50 -Dimensions: Ø 135 x 180 mm -Weight: 6.7 kg